Satellite A665-14F - IR Transmitter built-in Nvidia 3D does not

Similar Questions

• Satellite A665-14F - built-in Webcam suddenly stopped working

  Hello Toshiba people,

  I used Satellite A665 - 14F PSAW3E more than 2 years and I have really no problem with my webcam, until today. I realized all of a sudden (when I entered the website that requires a webcam) that my webcam is not working. (It works perfectly). My laptop stopped seeing to the integrated webcam.

  First, I checked the 'device manager' to find and check the driver of it, but I couldn't find the webcam. In fact I don't know in which category in Device Manager, I'm supposed to see. After that, I uninstalled the Webcam Application from Toshiba of the thing "Add/Remove Programs" of Windows. I found the Driver + Kit application to the webcam in my laptop Toshiba's European Web site and installed. He asked me to restart after uninstalling and installing both. I did both times. It is still not fixed. In addition, now light blue right next to the webcam (which is supposed to be activated when the webcam is active) is lit permanently, which is really annoying...

  The only other detail I can give to you guys, it's that I realized that I have an "unknown device" with an error icon yellow triangle on it in the category of the 'USB Bus controllers '. Could be related to my problem, as if the webcam is also associated USB hardware? Cause I believe that this unknown hit-and-run driver appeared in the same day with my webcam problem.

  Thanks in advance to any person for his time. (I use win7 - 64 bit)

  Best,
  Ibrahim

  > The only other detail I can give to you guys, it's that I realized that I have an "unknown device" with an error icon yellow triangle on it in the category of the 'USB Bus controllers '.

  I guess that's the internal webcam.
  Webcam module is connected to the USB controller on the motherboard and the yellow exclamation point means that software webcam was not installed correctly.

  In your case, I recommend first of all:
  (1) uninstall the software of webcam again
  (2) remove the unknown device Bus USB controllers in Device Manager (mark and press DELETE)
  (3) install CCLeaner tool can clean the registry and the system
  (4) restart the laptop and install the webcam software once more.

  Good luck

• Satellite A665-14F - can't get out SIM card more

  I tried to put a SIM card in the slot behind the battery, now I can't get out more.

  Can someone tell me how to get it out?

  Hi koalabaer,

  You have installed a SIM card in the Satellite A665-14F same the laptop doesn't have 3G card? Why have you done this? SIM card does not work with your laptop.

  Usually, you can get the SIM card if you press the SIM to extend it partially out of the computer. Grasp the card and remove it.

  Check this box!

• Satellite A665-14F - does not

  I bought new Toshiba Satellite A665-14F. CPU i7 RAM 4 GB, HDD 640 GB

  My problem is that my laptop is not responding during startup, everything I opened will not respond. Thoght even my friend has an i5 CAREB 6 GB of Ram and 750Go. It is portable starts faster than my laptop and it does not receive non - answer if it starts it is portable.

  I've done only the Windows update befor this problem happens then the beginning of the problem. I visit the Toshiba to the Kuwait company and they said that it is a software error and consider again (it seem well) now, but when I reinstall Windows updates the problem of the lack is back. Not that: I install all important updates and not important.

  I hope someone could help

  Hey Buddy,

  To be honest, I also think that this problem must be related software but I can't imagine it's caused due Windows update do you have already installed Service Pack 1 for Windows? If this isn't it!
  Have you noticed the same problem if you start your computer in safe mode?
  You use the preinstalled version of Windows 7 in Toshiba or is it your own installation?

  In the worst case, you must start a recovery facility and reset your laptop to factory settings. Then your laptop should work normally again.
  If you install Windows updates only the important updates are necessary. I have never installed not important updates.

• My built in mouse pad does not work

  My built in touch pad does not work.  How can I solve this problem?

  Hi LisaGreenberg,

  I'm sorry to hear that you're having trouble with the mouse pad.

  Before you start with the troubleshooting steps, I would like to ask you a few questions.

  (1) Windows operating system you are using?

  (2) what is the brand and model of the computer?

  (3) you receive any code or an error message when you try to use the mouse pad?

  (4) have you made no changes before the show?

  Please follow the link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/nl-BE/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Please answer we help you solve the problem as soon as possible.

• I have a Toshiba Satellite A85 with XP Home Edition series. Windows does not start. At startup I get Toshiba logo then a black screenwith cursor upper left. Can I save it?

  Toshiba Satellite A85 Celeron with XP Home edition. Windows does not start. I have Toshiba logo screen, then it turns into a black screen with the upper left corner of the cursor. I have the recovery disk. Is it possible to record HD without re-formatting and losing all data?

  Thank you;

  Lobo77

  If you run the Toshiba recovery application, you will lose all your data.  As indicated in the warning, this application will restore the computer back to wherever it was when it was first delivered by the factory.

  Without other complementary diagnostic information, it is difficult to determine what is happening.  Pressing the key (do not hold) of F8 beginning immediately after that the sequence of power should bring you to the Advanced Boot Options menu.  Try again then press repeatedly the key rather than pressing on and now.

  The recovery CD Toshiba, you have probably does not allow a "repair installation".  Contact Toshiba to see if they will provide you with a suitable CD.

  Given the fact that you can get a useful place when you start with the Toshiba Recovery DVD, my guess is that the computer is OK but that the hard drive has failed - or maybe more likely - the startup information is damaged so that it does not start.  If you have access to a computer equipped with a burner, download and create a bootable Windows CD.

  There are a number of available bootable CD which include various recovery and diagnostic tools.  You'll have to do some research to find out how to use the tools.

  Ultimate Boot CD 4 Windows
  Ultimate Boot CD
  Hiren BootCD

  If you feel overwhelmed by the tools and I just want back the data, and then use the Toshiba Recovery DVD, make you a Knoppix CD and use this key to your data, preferably on a network connection.

  If all this sounds like too much for you - and there is no shame in admitting that--take the laptop for a good local computer repair shop (not a type BigBoxStoreUSA or rather GeekSquad) and ask them to check it out and make sure to recover your data before anything else.

• Satellite A300 - built-in Chicony webcam does not work with Win Live Messenger

  Hello

  I just bought a * Satellite A300-1MC * (works on Vista Home Premium) and downloaded Windows Live Mail and Live Messenger.
  The integrated webcam does not work with Live Messenger; and when you select the tool, Audi + Vieo Setup in Messenger I get thye following message: "we are unable to launch the Audi video installation.
  The webcam works fine with the Camera Assistant Software.

  I tried: 1) killing the AC software and from Messenger. (2) dowanloading one driver webcam Toshiba Web site; (3) update of Windows Vista
  None of the above works.
  Any suggestion received with joy...
  Thomas

  You can try to install the CAM such as ManyCams software - http://www.manycam.com/
  Basically, the program to access your webcam video and redistribute it as a video device ManyCam.

  Richard S.

• Satellite A0302 C50D and Ubuntu 12.04.4 - touchpad does not work so well

  I have a Satellite C50D-A0302, PSCGWF part number.
  I use Ubuntu 12.04.4 LTS Pangolin specific to this topic, but the touchpad does not work so well.

  How can I get the right drivers for the touchpad?

  How do I know if the touchpad is Synaptics or ALPS, so I can get the correct drivers?

  Thank you!

  As you probably know Toshiba does not support Linux and does not offer Linux drivers.
  All about you Googling can find many Linux forums. Try to find useful information here. I mean you can exchange your experiences with other people who are fans of Linux and experts, so I assume that you can get help here.

• Satellite P750-135 - key FN and Blu - Ray player does not

  OK so recently I've noticed a few problems with my Satellite P750-135 with PSAY3E-059002EN part number.

  Not words, the button FN done any work, however when the Toshiba flash card settings are configured to enable the mouse above, the functions that I would normally use, for example FN + ESC to mute or FN + F6 to turn down the brightness, etc., the works of service.

  The problem has occurred since the drivers updated by a program on my PC but I can not restore the system to a point where the driver has been updated. I uninstalled the driver and installed the driver from Toshiba Web site and tried countless other things without success. Any help would be appreciated.

  As for my second question, a while back I tried to play a Blu - Ray movie on my laptop and it works as it is. The drive plays DVD but when a Blu - Ray drive is inserted, the drive whirs, the AutoPlay window opens with no program to read it.

  I have tried opening the Corel to play it, but it does not work.
  The drive in question works on my One Xbox and Playstation 3, and I've tried other discs that don't work.

  Any suggestions?

  ccYou know that's not easy to say what the problem is here. When you get new notebook with the settings everything works and all the pre-installed drivers, tools and utilities work well together.
  Many people install some updates which are not so important, and then something can go in the wrong direction.
  > The problem has occurred for a program on my PC updated drivers...
  To be honest I don't know what program do you have average and exactly what has been updated.
  In any case you can try to solve this problem of FN keys is to remove preinstalled Toshiba value added package, restart your computer and install the latest version of the Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Utility of flash cards is part of this package and I hope after installation of VAP own this will work properly again.

  Blu - Ray movie question:
  BD BD to play drive before graphic driver will change color and switch to Win7 basic running drive Toshiba BD is not compatible with certain Visual elements. Have you noticed this in the past, this automatic switching between the color schemes?
  Did you perhaps updated original display driver Toshiba?
  > I have tried opening the Corel to play it, but it does not work.
  The very fact of start or not?
  This is a bit complicated.

• Satellite Pro A30: after disk HARD replacing the BIOS does not see DVD or HARD disk

  Hello

  I bought a new Pro A30 of Satellite earlier.
  Shortly after, I noticed the system sometimes
  would freeze, with a rattling of the HD.
  A reboot cold was the only solution.
  I was told to replace the HD I did but the
  problem persisted with the new HD.

  I tried a known working HD and the problem still persisted.
  At this point, the warranty period has increased.
  Frost started happening more regularly, and
  now, the BIOS does not recognize the HD player or DVD.
  It starts and then try to boot from the network,
  because he doesn't have a HD or DVD player.

  At this point, I think I need a new system board.
  Someone at - it other advice or seen this problem
  before?

  Thank you
  Ray

  Hello

  What happens if you remove the CD/DVD drive or the HARD drive?
  The laptop recognizes one of these devices?
  Have you used the devices recommended by Toshiba?

  in any case, this seems very strange and the dysfunction of the motherboard is not impossible

• Satellite L50 - A - 14 M - Toshiba pc health monitor does not work

  Hello!

  I am new to this forum and I have a problem with my new toshiba satellite l50a - 14 m. I did a factory reset recently and the integrity monitor (whitch is an excellent program in my opinion) no longer works...

  When I opened it notify an error "Could not get the flag to enable sorts in the registry" and does not turn on.
  I have 8.1 64-bit windows;

  I tried to download versions more but do not work.
  How to do?

  Sorry for my bad English...

  TSRI means the Intel Rapid Storage Technology, and there is also a TSRI driver available on the Toshiba UE driver page.

  You need to update or reinstall the driver.

  I think this will fix the problem of pc health monitor

• Satellite program-112 P775: HDMI connection to the TV does not work

  Hello

  For some reason that the HDMI connection between my Toshiba Satellite P775 program-112 to LG TV no longer although he did for some time.

  I tried another laptop without problem.

  I posted the same question some time ago and told to press the Fn and F5 keys, but it did not work.

  Any suggestions please?

  You are right: the FN + F5 switches between the internal and external video output.

  What exactly happens when you press FN + F5? A map falsh menu appears on the screen when you use this key combination?

  On the page of the Toshiba UE driver you can find the Manager command HDMI. This driver is required for your HDMI controller.
  In the case where the output to HDMI does not work, try reinstalling the driver

• Satellite U400-12F: LED power button & HDD protector tool does not work

  Hello

  I have a Satellite U400-12F and I bought a Vista Ultimate.
  After you have installed all the drivers and Toshiba of the corect order downloads, the button to turn on the power lights does not work.

  And I tried to install HDD protection Utility but the installer returned an error like 'cannot be installed on this model.
  Do you know why these problems?

  Thank you very much
  concerning
  Daniel

  > After installing all the drivers and software of Toshiba by order, the button to turn on the power switch lights does not work.
  Please check the BIOS settings. As I m not wrong not it takes an option called LED illumination or something like that. There you can turn on and off.
  Also, try to customize the special button of TOSHIBA using the Toshiba control utility.
  There are also some useful options.
  But to be honest I n not know exactly if this button doesn't work with Win XP. Maybe this feature is not available in XP.

  > I tried to install HDD protection Utility but the installer returned an error like 'cannot be installed on this model.
  This error message appears if you try to install a tool that was not designed for this series of laptop.
  The U400-12F seems to belong to the PSU40E. Check if it s a good tool.

• Satellite U300 - 13 M - port external monitor (VGA port) does not work

  Dear users of Forums from Toshiba,

  I have a problem with the VGA port. I use the Windows XP operating system. Laptop, do not display on an external monitor, I tried all monitors to connect to my office, but does not solve this problem. I also tried to reinstall Windows XP, once again, and nothing has changed.

  Please help me.

  Best regards, Elbrus

  Hello

  I guess that by Satellite U300 came preinstalled with Vista. Am I right about that?
  Anyway, if you want to use external monitor and switch successfully to him you must install the utilities and tools of Toshiba. There are several of them and allows you to use the FN + F5 key combination and move your desktop to laptop LCD display to the external monitor.

  Can you please tell me one thing: have you installed all the stuff of the Toshiba download page according to document Instructions of facilities?
  The configuration of the laptop is not known to me, but try please check the Intel properties and let me know if the external monitor is recognized in properties. Usually, you can choose to use the external monitor there.

  You can also start Toshiba HWsetup utility. There must be tab display. There you can also find an option to use the LCD screen + monitor at startup.

  Check it out please and post the results.

• Satellite 1900-803: Hi-Speed USB 2.0 card does not work

  I have a portable satellite 1900-803. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card, but it does not work. Manual of the card says that after the successful installation, I'd see a second 'USB bus controllers' heading which I did not. I even it was replaced by another one thinking that there could be some problems with the drivers, but it still does not work. whenever I plug in a device such as an mp3 player, a digital camera or a usb storage device, windows locks all of a sudden upward, won't move the cursor, the function ctrl-alt-del does not work and the worst of it, I can't turn off the machine!

  the map shows that it runs on any 32-bit location.

  I have the manual and the Device Manager to see if mine is a 32-bit, but I don't really know. This is probably the reason why it doesn't work? or is there another reason to make it work not? If this is the reason why, is there a way where I can upgrade my laptop's pc card slot to make it work?

  Help, please.

  I posted this question yesterday morning and did not get a single response. is it because it has to do with an older laptop? Please, someone, help...

  Post edited by: wes0702

  Hello

  Have you checked the Bios? I guess that the Bios Toshiba was preinstalled on your laptop. Am I wrong? There should be an option to change the PC Card controller mode.

  Here, you can change the mode of the automatic selection, CCIP compatible controller or card bus/16-bit.
  If the card supports 32-bit so you should use the 16-bit option.

  I think you should play a little with this option and possibly that the card will work.