Satellite C50 - b - 14 d does not start successfully

Similar Questions

• Windows does not start successfully - only in safe mode.

  I have a 3200 HP with XP Home Edition. Windows starts only in Mode safe when I download Service Pack 3. Is there a way to fix this without doing a complete restore of the system.  I've been running without SP3 because I knew of this issue. Recently, it has been downloaded and now Windows does not start successfully.  Only in Safe Mode.   When I discovered this problem, I was able to fix it, but can't remember if it was fixed without doing a complete restore of the system and starting over.

  Required reading:

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c01457284

• Satellite A200-1 body weight does not start

  Hello

  I have a Toshiba Satellite A200-1BW model that frooze all to use and would not start again.
  I have checked all the power drive options very well.

  I have the blue AC power led on and the orange light but pc does nothing. I tried to power up without battery with AC, but always the same question.
  No fans don't come on etheir. PC won't in the start-up phase, and nothing appears on the screen that is constantly empty.

  I don't get the HDD 200 GB startng so I swapped it for a work of identical spare but the pc still does not start.

  My only conclusions are that I have a dead motherboard or a power problem internal.

  Its the real frist problem I've had with this laptop so am just checking to see if anyone out there has had the same problem or knows all the patches, I have not tried.

  Yes, that sounds like a serious hardware failure.
  Looks like the motherboard, GPU, or another party on the mobo may be defective.

  What about RAM modules? Did you check both?
  Please do

  Otherwise if there s no RAM issues then you will need a professional technician help.
  At the moment I put t see any other solution you :(

• Satellite M30-107 does not start successfully after using recovery disk

  Hello

  I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
  I used the toshiba recovery disk, but after that the laptop is no longer support windows.

  When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
  When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

  Any help or advice would be much appreciated.

  Thank you
  JT

  Hello

  Sounds a little like the laptop does not start because of the problem of Windows software
  You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

  I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

  You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

  In this case we (you and me ;)) might know if this problem could be related to hardware or software.

  Good bye

• M - series of satellites does not start successfully

  Hello

  I have the following problem: all of a sudden (don't know why, nothing has changed) portable Satellite shows black white screen with all the following:

  (Sorry, translated from German):

  Windows does not started correctly... due to software or hardware change... If the error was due to stop pls choose last functional configuration...

  But this does not, as all the other options (windows boot as normal starting point, in safe mode... has failed.

  No idea what happenend!

  Problem:

  Actually moved to another country and you have forgotten or lost the recovery CD! already contacted Toshiba for the nine, but perhaps when even someone can help?

  If all goes well it s not a malfunction of the equipment.
  In any case, in the first stage, you should try to reinstall the OS to see if this problem is software or hardware related.

• Satellite L505 - 10 M - fan does not start

  I have a problem with my Satellite L505 - 10 M.

  Suddenly the fan does not start over and because of this, the laptop get quickly overheated and stops. I installed Windows 7 top me, quite some time ago, and this time it was 2 weeks ago while it just happened this evening. I have not installed anything new and nor I did something special with him, he just does not start fan more.

  I checked this forum, cannot find anything either, searched and could not find any problems with Linux and the fan, but not Windows (it does not start at the start of the bios either).

  If anyone has a thought, a similar experience or a solution, it would be really useful

  Greetings,
  JanPieterz

  Hey Buddy,

  You have installed Windows 7 Microsoft disc or Toshiba Recovery disk?

  Well, if the fan doesn't start anymore, you can t a lot and I think that the fan needs to be replaced.
  What you can do is load default settings in the BIOS (press F9 key in the configuration of the BIOS) and save settings. Also clean your laptop using a jet of compressed air, maybe the fan will be blocked by the dust.

  If he doesn t it work s time to contact a technician for laptop. If your laptop is under warranty, the repair will be free. :)

• Satellite L850: Catalyst Control Center does not start

  Hello, I have an AMD 7670 m dedicated graphics card and when I install the AMD display drivers downloaded from the toshiba site, the Catalyst control does not start and he also seem to have problems with the usb ports and my wireless stops working for some reason any.

  Is that what I can do on it or am that I better use the downloaded drivers directly from AMD? Thank you

  Maybe stupid question now, but why do you need it? Have you been preinstalled OS with your laptop or you bought for laptop computer without an operating system preinstalled?

  What model do you have exactly (L850-xxx)?

• Satellite A210-199 does not start successfully after the BIOS update

  Hello

  I've got Sat A210-199.
  Yesterday I updated the BIOS, and after that problems occurred:

  While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
  I guess all this because the temperature of the CPU:

  When I do nothing it is 77 C. I don't think it's normal: (.)
  Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

  Why this temp is so high?
  There is no any process background or something.
  Is this normal?
  And what about this new BIOS?

  To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

  This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

  Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

  Good luck!

• Tecra M2 does not start successfully - zeroes appear all over the screen

  Help!

  My Tecra M2 does not start. After the toshiba logo, a series of zeros (0) appear all over the screen.

  -suspect it is caused by a virus, I formatted the HD (in another PC), but still the zeros appear
  -I might want to start in the DVD player, it seems to read the disc, but nothing happens, just a cursor flashing at the top left of the screen
  -J' I reset / replaced the RAM, but still no effect.
  -the power button works, lights and shuts the laptop but does not start.
  -CPU fan works
  -LED indicators of work are power, battery, dvd, wireless. Does not have HD LED light on.

  Any suggestions on how to solve this problem is greatly appreciated.
  See you soon!

  Hello

  I think we can exclude HARD disk failure because you are able to format it in another computer.
  As you suggest the RAM modules has been replaced but the problem persists
  So in my opinion, a motherboard problem would be possible

  But as you know, it of really difficult to say what might be exactly wrong
  I think that the technician should check the laptop then it would be possible to say what part is malfunctioning

  In any case, I think a motherboard might be affected

• Windows 7 Enterprise does not start successfully after re - install

  I have just reinstalled Windows 7 Enterprise 32-bit with SP1 on my laptop HP 6715 b. (I use 32 bits for any software that I develop is always compatible 32-bit.)

  After you have re-installed however, it does not start correctly. What came with windows announce "Starting Windows", but the following animation never - start the four lights that turn and turn into the "Flying Windows Icon.  It then crashes right there - do nothing, no matter how long wait.

  If I can put the machine power off and re - start, we are at the "Windows Recovery screen" - because it has not started correctly the last time.  From there, I can choose to make a recovery and return to the last Point of good restoration, i.e. on a freshly installed system before the update of Windows, of course.

  If I select "Start Windows normally", it starts however. But it is not 'Normal '. For example I can't finish my "Windows Easy Transfer".  It says that it cannot connect to my domain name - even if I am connected to my area and have been using it to install other software.

  Or I can do a Windows Update "normally". The last time I tried, it is gone for hours without finding what be - so I left it overnight. In the morning he had apparently found nothing yet.  However when I turned off the machine and then turn it again - he told me there are 211 updates installed.  WHO has literally all day.

  I'm not happy to come back to the last good Restore Point.  I did once.  He has NOT fixed the problem.

  I also tried:

  • Using MSCONFIG to disable all the startup and Services, apart from Microsoft and Kaspersky - no improvement.
  • Do a CHKDSK - revealed nothing.
  • Start in Safe Mode, did change his behavior.  This time I do not have the Herald "Starting Windows".  But turn the machine works again once, return me the 'Windows Recovery screen '.

  Ideas anyone? I'm at my wits end.

  It's OK guys.  I have it sussed.

  He was objecting to the fact that I had my USB with my "Windows Easy Transfer" files on it, plugged during the initialization of the system.

  Also, I was wrong in my thinking on how "Windows Error Recovery".  I assumed that he would do all that it checks before proposing to do a system restore.  It is not, it suggests a restore of the system first.  If you say NO to that, then he makes his audit.

  What is finally here, is that I finally chose an option before he went into the system recovery.  Then, I waited until he was asked to do a system restore.  I said NO, so he went in it checks.  He went through his analysis and finally concluded it was some "system unspecified device" recently added.

  Well I haven't nothing added to my machine for years.  So, I was puzzled.  Then I thought ' well, I don't normally have my key USB is plugged. "  I wonder... ».  I therefore disconnected the USB drive and rebooted the machine.  The rest they say is history.

  Hope this sorry tale helps someone else.  It just cost me four days!

• Satellite A500 - 1C0 - Bluetooth monitor does not start

  Hello
  I noticed that a new Bluetooth monitor was released for my Satellite A500 - 1 c 0 and so I tried to use it.

  First, I downloaded the Bluetooth stack and Bluetooth screen and install it. As soon as I restarted my computer loaded Windows system default Bluetooth service. I tried to manually start the monitor installed, so I tried a Bluetooth Monitor and it came, but nothing happened. Ultimately the only way to get the old dos application had to use system restore. When I restored it to the previous system I just installed Bluetooth Monitor without installing Bluetooth Stack, and there it is again. I only use Windows Bluetooth utility.

  How can I disable the utility and use Bluetooth Monitor from Toshiba or I can do it by default? It does not even start.

  Thank you
  Stefanos Constantinou

  Hello

  You can post information please?

  What operating system you use and that you have installed Windows recovery disk or Microsoft?

• Fan of Satellite U500 - 11 c sometimes does not start running Win 7 64 bit

  Hello

  I have two Toshiba Satellite U500 - 11 c on Windows 7 Home Premium 64-bit. Sometimes, after a new start of Windows, the fans start and just run a few seconds sometimes. When this occurs, the CPU temperature gets very hot (do not know exactly how much). I found a way to return to a behavious normal just unplug the power cable and reconnect it just a second or two after.

  Two laptop computers have the latest Bios and drivers of Toshiba. Somehow, it's the same behavious as under Linux.

  With these experiences, I just thought that Toshiba laptop are not well properly handle ACPI Fans and tempartures. Is it really inevitable?

  I hope that this feedback can help...

  Hi mate

  Cooling modules are controlled by the fan which is stored in the BIOS table.
  Fan table contains details and information when and how fast a fans should run.

  Besides computers laptop Toshiba supports protection against overheating. This protection monitors the temperature, and if the temperature is too high, the laptop turns off automatically.

  If the laptop does not turn off automatically then I suppose that the temperature is not too high

• Satellite L650D-10J - Windows 7 does not start

  Hello

  I have a Toshiba Satellite L650D-10J, Windows 7 64 bit, 4 GB RAM and it do not start Windows 7. He begins to see you logo startup Toshiba etc and then it goes to black and it loads Bootmanager of Windows with the following message;

  + A problem on your computer has occurred during communication with a device that is connected. +

  + This error can be caused by an external storage device as a drive external USB, the device in use, or damaged hardware such as a hard drive or CD-ROM drive disconnect that is damaged. Make sure that all removable storage is properly connected, and then restart your computer. +

  + Contact the hardware manufacturer, if you still see this error. +

  + Status: 0xc00000e9 +.
  + Info: an unexpected I / O error has occurred. +
  (it has been translated by the Dutch there are some sentences that are incorrect.)

  I tried to download a Windows 7 recovery disk, it burned on DVD. It works, I'll get to choose where he was working to correct (I get an error) or use a Windows 7 from disc (does not work). And if I start it in safe mode I see that it stops and freezes to the file; Disk.sys

  Someone at - it an idea?

  Greetings,

  Hello

  And have you connected an external USB device as says the error message? If Yes, remove all USB devices and try to restart your laptop.

  If you can t start in safe mode, your operating system is confusing upward and the only option to get rid of it is to reinstall Windows.

  You use the preinstalled version of Windows 7 in Toshiba? If yes go to the start menu Windows by pressing the F8 button where you can select the safe mode, etc. and choose Advanced repair my computer option. Then select Toshiba HDD recovery and factory settings are restored. Also see this article on HARD drive recovery:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If disk HARD recovery doesn't work, you need an original Toshiba recovery disc. If you didn t create this drive just order a new one here:
  https://backupmedia.Toshiba.EU/landing.aspx
  ?

• Satellite A100 - BIOS and Windows does not start after the BIOS update

  Hello, I extend my Satellite A100 laptop BIOS.

  After update, I can't start my laptop and the BIOS will not start.

  You see the Toshiba logo?

  Was there a power failure when you updated the BIOS?

  Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

  If this does not help, you will need to send it to a Service Center for repair.

• My Satellite L50 - A - 1 9 does not start

  My laptop can start. The power button does not work and there is not all the light signals when connected to load. Any thoughts? How can I remove the battery.

  The laptop is L50 - A satellite - 1 9

  Hello

  On your model of laptop, you can't remove battery. It is placed under the hood and it should be removed by authorized personnel only.
  But your model has the force to close the holes that you can also use to reset the laptop. How it works, you can read on https://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm

  Please test. I hope this will help you