Satellite C55 - A - 1 K 6 - Partition which is Important for the recovery of Toshiba?

Similar Questions

• Installed Windows on the bad disk partition (C :) and meant for the recovery disc (e :)))

  Hello world

  My question is that I installed windows vista on the wrong partition. When I tried to do a re-install for partition recovery (e), I saw that the drive (C :) local was still installed with my last error when I first installed it on drive C: (OS) that is full. I didn't want to do, that I was going for the recovery disk (E :).

  If I re - install windows on the recovery disk now, he will have to complete partitions. I'm just completely start over as if I first had an empty space to install an OS right the first time around when choosing the right partition.

  It is on a latitude D630, where the BONE was full and the Data 2 which is the recovery disk (e) has free space that should have (c).

  Any help is grateful, thank you.

  Make sure that the important data that you have on the drive is backed up.

  Boot from the Windows DVD

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• Satellite C55A - 1 K 6 - partition which is necessary for the Toshiba system recovery?

  I have a laptop that Toshiba Satellite C55A - 1 K 6.

  In the past, I deleted the Partition Recovery Toshiba by mistake and now I want to ask the cause of the thing of this...

  When I go to disk management in Windows 8 (which preinstalled by Toshiba on my laptop) I see four partitions...

  The first partition is close to 1 GB and I think his need for Windows 8, then I see C and D for my Windows 8 and at the end there is a 11 GB partition and it is hidden and it does not appear in my computer in Windows...

  I just created 3 * 4.5 GB defined via Rescue Media Creator Toshiba Recovery DVD and now if I delete all the partitions on the hard drive, can I use these DVD media to restore my laptop to its original state, when I bought it or that I still need the recovery Partition on the HARD drive instead of using recovery DVd media?

  If I delete all the partitions on the hard drive now, are these DVD media are enough to return to the first State independent or not?

  Sorry for my bad English and I hope to describe things in my head... :)

  Sincerely...

  > in the past, I have deleted the error Toshiba Recovery Partition
  It was really bad move since the recovery partition is necessary in order to create the recovery disk or recover the laptop with HARD drive recovery option.

  > The first partition is close to 1 GB and I think that his need of Windows 8.
  That s right.

  > then I see C and D for my Windows 8
  That s right

  > and at the end there is a 11 GB partition and it is hidden and it does not appear in my computer in Windows.
  It looks like the recovery partition. But I put t understand why you said earlier that you deleted the Toshiba recovery partition. Could you please clarify this statement?

  > I just created 3 * 4.5 GB defined via Rescue Media Creator Toshiba Recovery DVD and now if I delete all the partitions on the hard drive, can I use these DVD media to restore my laptop to its first State

  The recovery DVD set would be to format the HARD drive and would recreate once more all partitions.
  The answer is: Yes, it will restore the laptop to the State as on the first day of purchase.

  By the way: I found another thread that you created on the same theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=76203
  Please follow a thread to avoid misunderstandings.

• I had installed windows 8.1 with bootcamp, it was a c drive and I tried to do a second drive d with management of the disks, but when I shrink c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my

  I use macbook pro.

  I had installed Windows 8.1 with bootcamp, that there was a c drive, then I tried to do the second drive with disk management d when I shrink the c drive and format the partition which was made by the management of the disks to d ' training, it destroyed my mac osx.

  Please help solve this problem.

  This partitioning is not supported. Please download GPT Fdisk from http://sourceforge.net/projects/gptfdisk/ and install it on the Windows side. Once it is installed, thanks for posting the output as indicated in the CMD window.

  

• going on a computer: how to cancel the password which is necessary for the opening of the computer

  How to cancel the password which is necessary for the opening of the computer

  Do you mean that a password is required immediately after you turn on the computer or when you arrive at the Welcome to Windows screen? If the first case, it is a BIOS password and how you disable it depends on what type of computer you have. If the latter:

  Set up Windows to automatically connect (MVP Ramesh) -http://windowsxp.mvps.org/Autologon.htm

  If you would like more information or is not what you mean, please explain your post.

  MS - MVP - Elephant Boy computers - don't panic!

• Error - Rome: Total War did not find DirectX 9, which is required for the game to run. Please reinstall DirectX.

  Original title: problems running Vista on Bootcamp DirectX.

  I have browsed the web for the last little while and cannot find any solution.

  I am trying to run Rome Total War on Vista, on bootcamp on my iMac 27 ". However, every time I start the game is active an error message saying "Rome: Total War has not find DirectX 9, which is required for the game to run." Please reinstall DirectX.

  I've been searching the net and have used some DirectX downloads (9) on several trusted sites, but the error message always everytime that I try to run the game.

  I have 'Run' 'dxdiag' and on the 'system' tab is says I have DirectX 11, section 'Information System '.

  I do not know where to go from here, any help would be greatly appreciated

  Have you installed this installation?

• Satellite C55-A-1N2 - Windows is broken and without access to the repair option

  Hello

  One of my friends had a Satellite C55-A-1N2 nine November 2013 with windows 8.1.
  The serial number is: yd344983s

  Initially, there was a problem with wifi.
  I found a lot of adware...

  I have uninstall most of them by hand and clean everything with adwcleaner.
  The laptop works very well, I cut the DNS client service and add anti-pupsadware in the hosts file to prevent any new installation of adware.

  Everything was ok and give again to a friend.
  But the new commissioning, windows was slow, unable to connect wifi, enter in the config panel, do anything actually.

  I tried according to manual, press F8 and power, but who turns just to log on windows.
  I also tried F12 and tried to use the CD of windows 7 without success.

  You have ideas of what I can do?
  This looks pretty bad.
  Thank you.

  Mickael
  France.

  If you want to restart the laptop and use the repair options or recovery, you must perform the complete closure. How to do that you can read on http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm
  Reboot the laptop and if you want to use the repair options or recovery check it please the instructions on http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm

  PLESE NOTE: do not do some experiences before you have created a recovery media. Use the preinstalled recovery media creator tool and create recovery DVDs or USB.
  If there is a problem, you can use this recovery media to reinstall the original version of Windows.

• Satellite Pro A200: How to create Dual boot; Vista & XP using the recovery CD

  I just bought a laptop Satellite Pro A200, which was supplied with the product for Vista and XP Recovery discs.
  The license specifically Vista also XP licenses.
  Can I set up a dual boot so that I can boot to Vista or XP? If so, how?

  I would also like a third boot, Red Hat Linux 9.
  Any comments?

  Hmmm. Usually it s possible to use two or more operating systems on the computer, but as far as I know the Toshiba Vista recovery CD formats whole disk when installing Vista and this will lead to the loss of the OS installed.
  I m not 100% sure on the recovery of the newest XP CD called RECON doesn t CD include an expert mode which allows to choose between the different partitions.

  So I guess that each use the recovery CD will format the HARD drive and erase the installed data. But of course, you can try to install the two BONES and to check if the restore XP CD allows to choose the second part of the installation of the OS.

  If it does not, it seems that you will need to an original XP from Microsoft CD or the original CD of Vista to use the two BONES.

  Best regards

• Can I send by Satellite A300-y00 for the recovery procedure

  I had the problem in my Satellite A300-y00, which are viruses, trojan or more than threats.
  I would like to ask if it is possible to refer to Toshiba to reformat with a new new?
  I mean will they install the same software with everything as a new included in order to remove all the threats.

  It will cost more?

  Hello

  As I m not wrong not the A300 was equipped with HARD drive recovery option.
  This means that you can grab the laptop and set it to factory settings very easy and without use of the Recovery DVD!

  Then turn on the laptop, press the F8 key and choose the option called fix my computer.
  Then, a new screen should appear and you need to choose the last option called Toshiba Recovery or something like that.
  Then follow the instructions on the screen.

  The whole HARD drive must be formatted and new operating system with all the drivers must be installed

• Disc of some issues concerning the recovery of Toshiba Satellite A215-S7422

  Dear all,

  I have problem with my Satellite A215 - S7422 (AMD)
  I bought this unit included Windows Vista Home Premium + recovery disk inside the packaging.
  I love the Vista fitures, amazing!
  But some programs I've had has not supported for Vista. It's too bad for me.
  So, I tried to make new partition installed Windows XP SP2.
  The problem is that my Vista not appeared more.
  So I tried to recover my Vista with my recovery disk. But unfortunately, it has not worked at all.

  Issues related to the:
  1 can recovery CD did not work if divide us the hard disk (make a few partitions)?
  2. my recovery disk file is .tib, so I try to use Acronis Image, while I have my laptop running program has not detected DVD player. I try to copy the file to two disk partition recovery empty, I can see the .tib file, but it did not work also. Can you explain what causes probably?
  3. If I format all the drives that make a player, can Recovery Disc works?

  Please do me a favor for this
  Your help will be appreciated.

  I'm not quite sure how it works on the American series, but I think that it s not very different from the series HAD m.

  (1) No, you can not divide the HARD disk by using the recovery disk. The recovery disc will format the whole HARD disk and create partitions as at the beginning.
  (2) I doubt you can burn using other 3rd party programs. Toshiba has installed creator Toshiba Recovery disk that should be used to burn the recovery disk
  (3) as I said in point 1-> recovery disk will format the whole HARD drive. It s no matter how many partitions is created on the HARD drive. Everything will be erased

• Change the drive letter for the recovery partition

  The recovery partition is, by default, the value to D: which means that if I create a data partition, it is automatically in letters f: while this is not unacceptable, it is inconvenient.  I would like to change the drive letter of the partition data on D: and set the recovery as f partition: if I do this, it will automatically disable the ability to recover?  I am running Windows 7 Professional, which is an originally installed Windows 7 Home Premium upgrade.

  Hello Richard9, if you change the Recovery D: HP restore partition to another letter, the recovery procedure would not work if you ever need.

  If you have files HP Recovery discs, you could delete this partition and recover the capacity of hard drive D: and use the set of diskettes to restore HP recovery to reintall the original software and the partitions of the hard drive, all as they were when shipped from HP.

• Satellite Pro A60 EN does not start after you have used the recovery CD - isapnp.sys missing or damaged

  Help am stuck with it.

  Necessary to perform a recovery on the laptop and used the recovery CD 2 they seem to work OK. No error during installation, but after that they finished and it restarts didn't get the following message.

  Windows could not start because the following file is missing or corrupt:
  System32\drivers\isapnp.sys

  You can attempt to repair this file... etc but I don't have any original installation CD all have is the recovery for the Toshiba.

  I have a setup of Windows XP for the PC disk, but when I try to run which, but it starts just the configuration. Setup is loading files and after the kernel debugger get error

  "File ntkrnlmp.exe could not be loaded.
  The error code is 4, sometimes it's 7.

  I tried to delete and recreate and formatting partitions, so I can see and I can copy a file to the C: drive

  So any suggestions as to what wrong here

  Thank you very much

  I put t know if this Microsoft Knowledge base article would be useful for you, but you should check it out.

  [You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup | http://support.microsoft.com/kb/315311]

  Microsoft has a solution, and I would like to know if you can solve this problem by following the steps of the solution described in the article.

  Feedback would be much appreciated

• A software update is removable which was intended for the iPhone OS?

  I have a 6 s iPhone, iOS 9.3.1 and I updated the last update but my iPhone 6s has not been good since.  Unable to connect to wifi properly.

  The update was for the iPhone 6se but didn't know I shouldn't have installed.  This update may be removed from iPhone6s?

  The update was for all iPhones 4 s from

  I have a 6 more on 9.3.1 without problems - with regard to the WiFi

  Please do the following and after each test to see if the problem is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Please see recommended settings of WiFi routers and access Apple points.
  2. Check if the problem is related to a single device and if other devices connect normally-
  3. If the 2 answer is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  4. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  5. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  6. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  7. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  8. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  9. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  10. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Pavilion 15-ab216ut: for the RECOVERY Partition low disk space warning

  SPACE LOW CONSTANT WARNINGS for D: drive or recovery drive.  Win 10-1511
  This machine, by default, had System restore ON D: (recovery Partition) and OFF to C:?
  And noted that the items on this drive the recyclebin stored automatically deleted
  
  Partition is 7.36 MB free 19 GB?
  
  Reduced size allowed for d: to 1 MB
  System restore disabled on D:
  
  and emptied the Recycle Bin.
  
  Made sure the restore files are present
  
  Am tempted to turn off space low attention entirely... but not desirable?
  
  Only solution I see is to use a disk partitioning tool C: reduce and enlarge d:?   Is what he... or is there an option that I'm still learning?
  And WHY in the default config is disabled on C and enabled on D system files?

  As stated in my post... tried everything...
  
  Resolved: I Resized deliver two primary partitions... a lot of movement and handles... not to damage or lose the System Partitions.  now having 1 GB free on the RECOVERY partition... and no warning...
  NOT a good experience OOB...

• Satellite L505 - installation of Windows 7 can't find driver for the DVD

  Hello

  I bought a Satellite L505 with Windows 7 home 64 bit. Now, I want to install Windows 7 Professional 64 bit. However when the installation starts he reports that it cannot find a driver for the DVD.

  Who can help

  Concerning

  P. Engels

  Hey,.

  If you do a search on Google you will find a lot of results on this error message and in general it s associated with the middle of the installation (DVD itself).

  Do you use an original disc of Microsoft Windows 7, or is it a copy to a friend?

  You should only use the Microsoft original disks with valid software.