Satellite C650 - 15 d has three short beeps when starting

Similar Questions

• computer not start, receive a beep long and three short beeps

  Just installed the update video drivers ATI disk mag APC program and when I tried to start computer I'll beep long and three short beeps but nothing else happened.  The answers to the problem

  These beeps are error codes of the BIOS POST (Power on self test). A series of long and short three is usually a related video.

  This is usually caused by a problem with the video card or the memory on the video card. It can also be a motherboard problem. I don't know how this is related to the update of video drivers, unless something was going wrong catastrophic.
  If it is a PC with an independent video card, you can try physically re - a corner of the card or install a new card, so you can have access to the computer for a further diagnosis. There are not many other things that can be performed before the replacement of hardware components (motherboard, video card, etc.).

• MacBook Pro done three short beeps and a pause.

  MacBook Pro made three short tones beeps and flashes the power on light then made a break of approximately at the same time it does beep. What it repeats. I stopped it by cutting off all the external references and by pressing the switch for about 10 seconds. Any thoughts?

  It turns out that I must have accidentally open the clip of RAM when I upgraded my HD up to 1 TB. High memory was loose and tilt. Carefully, I removed the memory and then reinserted it. Back to functional without beep.

• AY747AA: I need help my pc has 1 short beep, 1 long beep

  Hi there I seriously need help you guys with my model # P6310Y.

  I constantly hear 1 short beep and 1 beep long when I try to start my PC. According to hp, it's a memory problem, but I proved it wrong.

  I went to remove the RAM check if one of the modules is bad.they are all good 2 GB x 3.

  I also removed the disk hard windows 7 and I still get the beeps that I described above. I made sure that all the cables are correctly seated and I cleaned the MOBO set for dust, including the CPU.

  I get a white one on my screen nothing shown.

  When I plug the keyboard I get no power, lights (NumLock, CapsLock) etc.

  The mouse is powered.

  I replaced the power supply always get the beeps and I can remove it all cables, hd, mouse, KB and the beeps continue.

  Please help me guys that I have reached a dead end and I thank you for your time,

  Sincerely,

  tech1126

  Quote from Wikipedia:

  S/PDIF (Sony/Philips Digital Interface Format) is a type of digital audio interconnection, used in audio devices to the audio output over relatively short distances.

  In any case, it's time to "responsibly recycle" this motherboard and get a new one.

  You traded all that was possible exchange, without solving the problem.

  Pull on all small riders off the coast of the old MOBO and then save them.  They might be useful.

  Try to find a MOBO from the same manufacturer with the same type of CPU (Intel processor) or AMD in AMD.

  That increases the chances of (stored on the current hard disk) Windows being able to reconfigure itself to adapt to the new hardware configuration.  This "correspondent" also helps to position all the external (USB, Ethernet) audio connectors on the new MOBO to physically enter your current case.

• Audible alarm (beep) when starting a satellite A60 742

  Hey!

  When I try to start the laptop, a sound comes from the speakers and it stops after a few seconds.
  I don't know what the problem... Please, need help!

  Thank you very much!!

  In my opinion, the beep was caused by Power-on-self-test (POST).
  The STATION is running in the background and checks your hardware to ensure that everything works correctly.

  The sound signal is a BIOS error code and it seems as if a hardware failure has been detected and in most cases it s a malfunction of the motherboard :(

  I think you don't have a lot of possibilities.
  In my opinion, you need assistance from EPA.
  The technician may test the computer laptop and could know what's exactly wrong and what causes this problem.

  In the worst case, you will need to replace the motherboard and is not cheap.
  You know, everything is about money, you can easily get a new motherboard, but I guess you will have to pay about 350-400 euros.
  Therefore, you should consider some other possible solutions IE a laptop second hand.

• Windows 7 beeps when start

  Hi all

  I have a Windows 7 Home Premium 32-bit machine, and I have benn, noting that it has become slower. I tried to order something and when I put my contact information, I couldn't click on the text box and the computer still does not respond. I rebooted the machine, and then he started making noises beeps for a while, and he then started normally afterwards.
  I also noticed that my mouse flickering os.

  Beep at startup of the motherboard BIOS and indicates a hardware problem, not a Windows problem.

  The number of beeps will suggest what the problem. You will need the motherboard manual to decipher the beeps, but the manuals do not always give the required information.
  The problem could be a power supply fault.

• Has encountered an error when start gpedit.msc

  Group Policy Editor error message appears when I run local:

  Has encountered an error while parsing.

  Resouce
  ' $(string.) IP_Stateless_Autoconfiguration_Limits_State)' referenced in the displayName attribute is not found.

  File C:\Windows\PolicyDefinitions\tcpip.admx, line 202, column 315

  How to solve this problem?

  Group Policy Editor uses ADMX files and looks like at least one of you're corrupt.

  The files are usually located here (assuming that Windows is installed in the Windows folder on your C drive):

  C:\windows\policydefinitions

  The files are just XML files and how she has been corrupted I have no idea, but they can be replaced.

  If you see stuff like this:

  

  Maybe just replace one file is all you need so there is a copy of the file tcpip.admx on my OneDrive:

  https://onedrive.live.com/?ID=A8C24A4BD70DC25C! 107 & cid = A8C24A4BD70DC25C

  You may need to take ownership of the current file to replace it, and here's a way to do it:

  http://www.Winhelponline.com/blog/take-ownership-of-file-or-folder/

  Before you replace the suspicious file you can rename/copy it somewhere safe 'just in case '.

  Note that running sfc/scannow will NOT replace a damaged ADMX file.

  How will I know?

  I damaged my file tcpip.admx on purpose to re-create this problem and run sfc/scannow and the corrupted file was not replaced.

  If the problem is more common with multiple corruption, there is a way to download install ALL GPE files of

  This link:

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=6243

  This download includes all languages and the many files that you don't have on your installation.

  Replace your suspicious files in this way is possible, but a little more complicated to get only the stuff that you are really interested, and if I were sufficiently pleased, I might be able to explain it.

• Beep when starting and past in startup mode

  Hello. I currently have problems associated with the startup mode. When I turn on my laptop, the laptop starts beeping loud and it automatically goes in boot by itself mode.  I, not having as much knowledge about the technology and do not know which of these options to choose from, I just pressed the Esc key and then my laptop automatically goes to the normal start screen and beeps constantly. I did no changes to my laptop and it's bugging me. BTW, my laptop is Lenovo G480 running on Windows 7. Is there a way I can disable this automatic start mode? Please help me.

  NN

  The model of the beeps should help you diagnose the problem.  Sound signals are specific to the computer so when you find the boss go to Lenovo (or Google search of startup beep sense) and check the most likely cause

  Read about it here https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/Identifying-BIOS-beeping-BIOS-beeps/ta-p/335421

• Alienware M18x R2: Loud beep when starting

  Sometimes it turns on and sometimes it isn't.  There simply BEEP BEEP BEEP one pause pause until I turn it off.  The Alienware logo does not appear in this case.

  I believe that this way is a bad mother or a corrupted BIOS or something.  How can I determine who he is?  I don't have a warranty so I hope it's something that I can fix it myself, but if it is the motherboard, I guess I have no choice to the send it.  Anyone know the cost if it is the motherboard?

  Thank you.

  First thing to do is unplug, remove or disconnect the battery and hold the power for 30 seconds button.  Remove and reinstall the bars of memory.  Try to turn on again.

  If you get the same model single-beep, the motherboard should be replaced.  They seem to run about $350 (parts - People.com);  If you don't replace it yourself, add another $100 or more with a workshop for a total of somewhere around $450.

• a short beep and 1 beep on hp pavilion media center 8120n

  My Tower is not start when I turn it on.  My son took off the side and that he was going to put more memory in it for me, but in the end it didn't.  He put the memory old back in and put the side cover back on.  Today, when I turn it on, it has 1 short beep and 1 long beep.  It just won't boot to the top.  Can someone tell me what I should do to get this operational return?

  RBurke, welcome to the forum.

  The BIOS beep Code you hear is due to a memory problem.  Here's a guide that will help solve the problem:

  http://support.HP.com/us-en/document/bph07107

  You should read the entire page.  Beep codes common to HP computers are towards the bottom of the page.

  If your problem is solved, please click "accept as a Solution.

• Satellite C650 - no option of factory on the recovery disk

  Hello

  My Satellite C650 caught a virus. I managed to start in safe mode and run AVG. Then stop it down, restarted and now says bootmgr missing. I ve used the recovery disc I made when buying, but it does not give me the possibility of Toshiba restore to factory State. I tried the option repair and everything I can think of.

  No idea what to try then as obviously I n t have a Windows 7 disc no matter what help would be most appreciated. Thank you.

  Hi debs2k,

  If you start from Toshiba Recovery disk what options you have exactly? Normally, you can restore the out of the box settings if you choose the Recovery Wizard.

  Generally all the Toshiba Recovery disk have the ability to restore the original settings, and I can t imagine that your drive doesn't have such an option. So please check again, I m that you have an option to restore the original settings. ;)

• Satellite C650 composed a series of beeps during startup

  Bought new Satellite C650 laptop for daughter, managed to establish a wireless connection and load anti virus soft wear.
  Laptop is now a series of beeps during the startup process after you log with password and before loading windows. Bleeps last about 10-15 seconds and count 20-30 constant beeps.

  What this mean and how can I stop them?

  Hey Buddy,

  This means that Windows does not start correctly and you can enter the password but it beeps again for 10-15 seconds?
  Well, that s very strange

  If so, you are using the version preinstalled Windows from Toshiba or did you install your own version of Windows?

• Two sets of two short beeps appear during the priming of the old Satellite Pro series

  Laptop was upgraded and repaired, with the new memory, DVD and hard drive in April.
  Also XP SP3 isntalled.

  Last week, I turned it on and windows was loading, I've heard two sets of two short beeps.
  Rest of the laptop seems to work ok, bar NIVDIA towers problems when I turn off, but I have now the laptop as I want and I worry about those beeps. Of course, guaranteed for repair was three months, and who is just exhausted.

  Oh woe is me. Can anyone? I can't reinstall everyting all again. Too old.

  A surfer very silvery with a phobia of beep.

  Hmm. I m using CCleaner also but just to clean the files in time and repair the registry, I never hear two beeps in missing hardware/driver, so for me, this does not look like CCLeaer that would solve...
  But two beeps sometimes appear when starting the laptop, this could be the sound POST (self-test notification under tension).

  However, you should also check if these two beeps would be available after the installation of new OS (new installation).

  Welcome them

• Satellite U400 - two of the three USB ports are not working

  Hello

  I have laptop Satellite U400 who has three USB ports.
  One of these 3 ports does not work correctly and the other two ports do not work.
  Is there anyone to show me any solution?

  Thanks in advance,
  Concerning

  Any solution? You mean a magical solution? :)

  No one knows the configuration of the laptop.
  No one knows what OS you are using.
  Nobody knows what you did last time with your laptop.
  No one knows how long you have this problem.
  No one knows what are the USB devices that you use to test USB functionality.
  What you have already tried to do about it?

  You want to have more questions?
  Maybe you should write more than three short sentences as a description of the problem.

• Pavilion 23-q070se: long three and four beeps when I turned on my pc

  As the subject says, my PC (Pavilion all-in-one 23-q070se, with 10 Win Home updated) three long beep and four short and repeated this model for some time (maybe 5 times), when I turned it on. But after that, he has worked - at least I didn't say anything bad. Usually, my pc is in "sleep" in slow motion. I don't know where this problem began; I don't know he was there during the two months, the other day in January, when I rebooted my pc and found this problem, until today.

  I tried to fix it myself, but I couldn't find the beep code. Please help me with this problem. Thank you very much!

  Based on the title that you have posted. It seems that the 3 long beeps followed of four short beeps is related to an error with your graphics card. Check your graphics card and make sure that it updated. Find your graphics driver in hp Web site to avoid any trouble.