Beep when starting and past in startup mode

Similar Questions

• Error message when starting the computer in normal mode: btdna.exe

  I get this error during start-up:

  WSA startup failed or if you have the wrong version of the installed Winsock.

  I tried the command prompt, run as an administrator and reset but it not taken care of the problem.  Help, please!

  Hi Amy Shane,.

  Welcome to the Windows Vista answers Forum!

  You can check the following link and analysis online on your computer to verify if your computer is infected with a virus.

  http://OneCare.live.com/site/en-us/default.html

  Step 2: Manually remove BitTorrent from the PC

  1 open the Task Manager by pressing the Ctrl + Alt + Del or Ctrl + Shift + Esc key combination.

  2. go to the processtab.

  3. search btdna.exe and right-click on it.

  4. Select end process.

  5. click Yes when the warning sign is displayed.

  6. close Task Manager.

  7 Click Start then start search

  8. enter C:\Program Files\DNA\btdna.exe / UNINSTALL.

  9. use the search function for all other instances of btdna and also remove them.

  If you are prompted to restart the computer, then restart and reinstall the btdna.exe.

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• keep the formula when cut and paste cells

  I have a workbook for card games where we're going to turn seats/tables throughout the day (6 moves in total).  I have reproduced the a sheet that has cells with formulas to pick up names among the other sheets in the workbook.  When I cut and paste them, for my seat of update, the formula of data changes.  IE:, journal name game 1, cell #A1 said = name cell A2 of sheet summary and so on.  When I cut and paste, it will change this formula in the correct sheet but bad cell.  Why is she even change any link to the other sheet?

  Thank you.

  It is difficult to follow what you describe here.  By workbook (not a term of numbers), it seems you're saying that worksheet. But in numbers, you can't have a sheet that contains cells. The cells are take-away in an array of numbers that is located on a sheet.  You can duplicate a table of numbers and you can also duplicate a sheet of numbers, but it is not too clear what you're doing.  How about providing a screenshot of what happens?

  SG

• FPGA disappear controls when copy and paste in VI

  Hello

  Strange effect here. I have a Vi that, if I try to create a new control - or copy and paste is a block of controls, the controls do not appear on the front panel - even if they are still on the block diagram.  It is a FPGA vi - but do not know if this is particularly FPGAS which is bad behave rather than the labview interface itself.  It seems that the problem may be an extreme version of the problem where the new controls are sent in the middle of nowhere on the front panel, so you copy on the block diagram - although in this case they don't seem to be anywhere - if you double-click it, and then you get taken to the empty boxes.

  Not sure if it's something to do with having a very long standing vi I was editing\adding\deleting stuff - so that somehow, he arrived at a State where he thinks the front is too full or something?  Someone at - he seen this before (and or have a solution to fix it).  It is really starting to annoy me - because as a general rule, it is best to test and develop FPGA on a separate VI stuff and then copy it to the main personality VI - but in this case, then, it kinda turns out to be a disaster.

  * I joined a project with a file in there that has reached this state of being off the coast of the façade - if someone wants to check the controls.  Basically, some controls are on the Panel before some are non-existent. NOTE: the VI itself will not do anything useful - I deleted all references to the FPGA IO etc.

  Hello

  I had a quick glance at this and at the moment the only solution I have is to copy the schema to a new VI. Once in the new Vi controls can be copied in and behave as usual.

  Unfortunately the VI has become corrupted somehow. You work with this VI a network? This can often be a problem because things get corrupted in the communication network.

• How to do in safe mode? What F key to use when starting to get in safe mode?

  need to know what F key makes me when starting in safe mode?

  Start typing F8 when you turn on.

  The options that are available to you, should be similar to the following:
  -Safe Mode
  -Safe Mode with networking
  -Safe mode with command prompt
  -Enable Boot logging
  -Activate the video resolution (640 x 480)
  -Last good known Configuration
  -Directory Services Restore Mode
  -Debug mode
  -Disable automatic restart in the event of system failure
  -Disable driver Signature enforcement
  -Start Windows normally

• AE 2014 hangs when copying and pasting of the layers of styles

  So we found and reproduces a CC AE 2014 Crash on several desktop computers.  When you attempt to copy a layer style to a layer and pasting to another layer (we tested with .png, .jpg and text) AE crashes.

  AFTER EFFECTS CAN'T CONTINUE: SORRY, AFTER EFFECTS HAS CRASHED.  FOR AFTER EFFECTS USING... (0::42)

  We found the work around for now, if you put ANY layer in the second layer style, then you can paste the style of the first layer to the second. Essentially, you must tell AE that the layer you want to paste a style is allowed to have a style.

  Anyone else having this problem?  I can tell you that the computers we have tested this on a Lenovo and Dell.  The Lenovo running a Nvidia graphics card and the Dell an ATI.  I can post more stats computer if necessary, but that doesn't seem to be the problem.

  This bug is fixed in the next update:

  http://Adobe.LY/1pFGGRE

• Translation problem click / highlight boxes when copy and paste slides from another project

  I am baffled by this problem because it doesn't seem wise. I opened a new project to record a simulation, and when I did, I copy and paste all the slides in the section in my "Master project" If you want to. After the dough, I noticed that all of the boxes, clickboxes and highlight, I had taken the time to carefully resize were all out of wack in terms of position. Here are the best, I opened a blank project and copy and paste the same slides... this time the click and highlight boxes were in the correct position. Any ideas?

  Thanks in advance,

  Neel

  Oh, 'in position '... I see...

  The project is bigger than the other? For example, the original perhaps to 800 x 600 and the new to 850 x 650?

  Positioning can then be turned off relatively...

  Take a few elements of the sample and note their x / y positions of the properties panel, in the first draft (under 'Transform' in CP 5.5).

  After pasting in the new, note these same x / y positions.

  Is there a significant factor?

  If this is the problem, make sure that the sizes are the same, make the dough, then expand the project later (and maybe everything will keep its anchors?)

  I have not seen that happen in new versions of CP.

  You can try to check "Keep the Proportions" option in the properties of the original, just in case where this helps to "compel the position" too... guess total...

• formatting lost when cut and paste

  I've been cutting and pasting text from one part of a file to another.  The text to move consisted of several paragraphs.  When I pasted the text in the location in the file, the formatting of the paragraph is replaced by the paragraph format of the paragraph where it was stuck. In other words, it is sticky as if I use

  Edit > Paste Special > text

  All of the suggestions.
  

  nytomt, thank YOU! I removed the Skype toolbar and the problem disappeared.

  I guess that Skype Toolbar messed with the Clipboard, he "said" Windows whenever items are taken into memory (Clipboard) change their plain ASCI text so it can be used to dial a number (Skype Toolbar allows you to select the phone numbers on web pages, email and so on and compose the using Skype). Thanks again nytomt!

• Spacing is introduced between letters when copy and paste text

  I use Adobe Reader X 10.1.1 on Windows Vista, but this problem applies to all users of Reader, that I tested it regardless of their implementation:

  
  When you open a text-under-the-page-image PDF file in Adobe Reader and then copy and paste the text, the spacing is introduced between the letters:

  For example, the word "test" shows as "t e st i ng" in the document text output, but that the 'test' on the original pdf.

  This affects 50% of the 100 000 PDF files in the collection, with between 10% and 90% of the words within those that show this phenomenon.

  The PDF files themselves are so impossible to search for the words in question.

  This does not occur when viewing and search PDF files in other viewers such as FoxIt or NitroPDF.

  Nor does occur when you use file | Save under. Text or display RTF or XML version.

  I can still reproduce this phenomenon on specific files or through the entire collection, on both my own system and with anyone else who opens PDFs in Reader.

  Any suggestions much appreciated.

  Hi André,.

  This problem is already fixed in Acrobat 11. Unfortunately, we cannot solve for Acrobat 10.

• Takes are silent when copied and pasted into the new track

  After recording several takes of a vocal part and a model gliding around how I like it, I decided to dub the voices and use another part of the (unused) takes.

  I created a new title in doubles (CMD - D) and pasted the vocal track (including), but the new double track is silent.  I can see the track and everything going out there and tried to remove plugins, copy and paste in different ways, but the track and just stay silent.  I can see them all here in the new track, and all that I can see, they should be heard.

  I tried this search anywhere online and cannot find any mention of this problem anywhere.  Is this just a bug?  I forgot something?

  What version of logic you use.

  It worked well here with 10.2.4

  Also how do you 'stick it '?

  After a screen capture of your page to organize with open mixer

• Photoshop CS6: image is too large when cut and pasted on a new file window.  I'm cut a picture of 2 x 3 on a new file, and it reads like 8 x 11 or more. How

  Photoshop CS6: I cut and paste a small part (2 x 3 inches) of an image on another new file window (8 x 11).  The transferred image appears huge. If I reduce the size, the whole image and reduced background, not only the image. How can I keep the image of 2 x 3 and keep the size of the canvas of 8 x 11?

  Thank you

  The transferred image appears huge

  Caircraft are 2 x 3 image is higher resolution than your 8 x 11 file.

   
  Change the resolution of the 2 x 3 to match you res 8 x 11 before you copy it to the new file or

  Choose this layer in the copied file and then edit > transform > scale. Be sure to hold the SHIFT key while you move the handles to angle to maintain the proportion.

  If your copied file appears even more of your 8 x 11, see angle of the scale handles, press Cmd + 0 (which is zero) to display the handles

• I can't get out of safe mode when starting, and can not run the Setup program from windows XP in safe mode.

  I have a XP box that would only start in safe mode.  I needed to repair windows, so I started updating reinstall option but to reboot it says it cannot run in safe mode then it tries to boot into normal mode but crashes - which is what I am tring to solve.  Now I'm stuck because the computer is now making a loop and I'm stuck.  There is no available recovery console, it shows just the installation restart then goes into the shot.  If I try to launch safe mode, that it says cannot run update in safe mode then restarts in normal mode, which hangs then.  I'm stuck.  Boy the days where I wish I could just make the prompt C:\.  Thank you.

  You can connect your problematic hard drive to another PC to copy your important data, using a device such as:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002

  or

  http://www.Newegg.com/product/product.aspx?item=N82E16812119244

  I'm still not 100% convinced that you boot from the CD. Your Dell has the option of F12 to select a boot real-time device (as soon as you turn on the PC)? Also, remember that you have to "press any key to boot from the CD" when you see this screen! Of course, during a reboot, you start from the hard drive.

  Even if you did everything by the book, a repair installation could easily 'loop' as you describe. But as long as your hardware is healthy, a clean install is done.

• No signal when start and can't get into safe mode.

  So, I have an E machine with microsoft xp on it. And last night I lost the signal of the monitor. But I just restarted it and she came back. But he started for about every five minutes after re boot. I put it in save mode, and he continued to do so. And then when I started again, there was a "serious error of microsoft" and I sent the error to microsoft, as well as something active desktop. Showing all the reasons of what can happen. My computer is really slow so I decided to just drive with flash reprogramming CD, I put in and restart it and I don't get any signal constantly even now when I reboot... Please help, thanks.

  Hi andreasburlet,

  ·         You see a message on the screen?

  ·         Have you checked for fine connections?

  ·         Do you want to say that you tried to reinstall Windows XP?

  Method 1: Ensure that all connections on the monitor are tight.

  Method 2: Connect and disconnect a RGB cable can help them as well and that could ensure a good signal. Look at the end of the cable to see if you have all the appropriate pins.

  Method 3: You can also try with another monitor, if possible. It could also be your video card. See if it is connected. If you are not comfortable doing so, communicate with a known person.

• I can't get out of safe mode when starting, and can not run the Setup program from windows XP in safe mode. Any ideas?

  can't get out of SafeMode to start

  Hi Retodelta,

  Thanks for posting. Try the following steps. Warning: the following may make your computer unbootable. Please make sure that you have a backup before performing the steps.
  
  Click Start
  Go to the Run
  Type "msconfig".
  Press ENTER.

  In this window, select the Boot.ini tab.
  In this window uncheck the option "/ SafeBoot".

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 beeps when start

  Hi all

  I have a Windows 7 Home Premium 32-bit machine, and I have benn, noting that it has become slower. I tried to order something and when I put my contact information, I couldn't click on the text box and the computer still does not respond. I rebooted the machine, and then he started making noises beeps for a while, and he then started normally afterwards.
  I also noticed that my mouse flickering os.

  Beep at startup of the motherboard BIOS and indicates a hardware problem, not a Windows problem.

  The number of beeps will suggest what the problem. You will need the motherboard manual to decipher the beeps, but the manuals do not always give the required information.
  The problem could be a power supply fault.