Satellite C650 - connection to the TV

Hello

I bought a s video cable a few days that my TV has a s video slot machine but my laptop does not work then I had something converter you plug one end on TV then an end in this converter then its got a VGA top connect and when I connect it to my laptop nothing happens.
I looked around settings etc. nothings wrong.

I wonder if you guys something that will work or a way to find out why my those works do not. My TV has s video to my laptop not its got VGA. It's Satellite C650 and my sony plasma TV is not HD, it's just got a s-video / scart slot. I hope someone could help me

Thank you

Hi joshuafalls,

Which means you use a S-video to VGA Converter to connect your PC laptop to the TV, right?

Well, when you connect the cable, it must use the FN + F5 key combination to switch between monitors.
In addition, check the settings of display driver. You can switch between PAL and NTSC TV but that s according to your TV.

Tags: Toshiba

Similar Questions

  • Satellite C650 - stuck with the underscore and black screen boot

    Model: satellite C650

    Operating system: windows 7 Home premium

    Problem: when I try to turn on the computer I see the Toshiba screen and then a black screen with a underscore that blinks several times then stops, and the computer is blocked like that. The fan seems to be working. I can't go to mode without failure or boot options, even if I press f8 or f12 nonstop.

    Last time I started mode, I was stuck on the screen but the connection keyboard touchpad did not work and I couldn't stop. After that I have the strength of closing down and try to restart stuck like that. No beeps or anything like that.

    Any help would be appreciated.
    Thank you

    Good news.
    Thanks for the comments.

  • Satellite C650 - message from the PXE ROM at startup

    My 6 month old Satellite C650 (Windows 7 64-bit) started grippements this afternoon and now will not restart. She gave the following message is displayed after the Toshiba screen:

    PXE - MOF: EXIT INTEL PXE ROM
    NO BOOT DEVICE

    I think that there is a "insert the disk and press a key" after that, but I'm away from home and have not all disks (not sure if there are home either!). So I tried a few off/ons and now does not go as far as the Toshiba screen.

    At a loss - nightmare!

    Obviously HDD is not recognized correctly, but the question is why.
    It's new model of laptop, and you should contact Toshiba service as soon as possible.

    Addresses and phone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

  • Satellite C650 - Question about the capacity of the HARD disk

    I just bought a Satellite C650. The specifications indicate 320 GB hard drive, but the diagnostic system indicates the disk space is 286 GB (free capacity is GB 261).

    Please indicate why this might be the case.

    Hi 12345,

    It is normal that you lose disk space after formatting the drive. 286GB is the normal capacity of a formatted hard drive 320, so everything is ok with your laptop.

    If you want to learn more about capacity on hard drives and need more technical information, why you only 286GB you can read this interesting Wiki:
    http://en.Wikipedia.org/wiki/Hard_disk_drive#capacity

  • Satellite C650 - cannot access the HDD recovery to restore Win7

    Satellite C650

    Windows partition has been destroyed, I have a copy of the recovery of HARD drive to an external drive, but using a disc of windows7 to start on windows does not recognize the recovery of hard drive as being any information system so will not restore the original windows and Toshiba Utilities.

    Press F8 and keeps O press the button of not raising the the menu with the option to restore.

    No clue as to how I can extract / use HARD drive recovery I

    Thank you

    Problem is this recovery saved disk image external DRIVE cannot be used. In s manuals document is clearly described that the owner of the laptop must create recovery media. This recovery media can be a DVD disc or USB key, depending on the model of laptop.

    What you can do now is to restore disc original order or to install the clean version of the OS with installation of Microsoft disk but it is also not the best solution.

    What do you think of all this? If you have any other questions you are welcome.

  • Satellite C650 - guarantee for the new buyer?

    I bought a phone of monthly contract in August 2010 and received a free Toshiba Satellite C650 with the phone. I did not use the laptop as it has been received and decided to sell it on. I had two people survey if I sell this with a guarantee - I looked at the information booklet that comes with the laptop and it says there is a limited with it.
    The potential buyer is able to take over the guarantee of this laptop? It has not been turned on/enabled or saved?

    It says that it comes with a 12 month warranty, so assume the warranty will be valid until August 2011.

    Hi lilioon_1,

    The warranty is not according to the owner, it s according to the model of laptop or s let the serial number. This means that if you have the laptop in August 2010, the laptop has a valid warranty until August 2011. Indifferent using the laptop.

    If you can sell and the new owner can always use the warranty.

  • Satellite 4090XCDT - connections of the basic food

    It's life had the power in this laptop connector comes loose from the motherboard and have no way to get the original POWER Pack to charge the battery.
    I notice 3 look for power connectors on the bottom of the laptop, does anyone know which connector is for what connection of the power supply so that I could use these instead.

    Thank you
    Dan

    Hello Dan,.
    Are you sure that this connector on the bottom is for food?

    It s better to open Notepad and do a little welding work on the conn of power.
    Hot glue afterwards to make sure that the connector is well fixed.
    BTW: check the radiator and do some cleanup would be good.

  • Re: Satellite C650 - problem with the devices connected to USB ports

    Hello

    Can help someone, I have a C650 and everytime I try to connect to something to him via the USB ports, it is not "found" by the computer?

    The other night, I tried to get pictures on my phone but it wasn'; work and I put it down to a problem with the phone, but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.

    The laptop makes a beep sound as it would on an extraction device when you plug... I hope that makes sense. So I am now assuming that the problem is with my computer, is there something I can do to fix this?
    Thanks in advance

    Sorry should add - it's like nothing is plugged at all when it is, and it happens on two USB ports, not just one...

    Post edited by: leahhw123

    Hello

    What happens with plug n play like USB mouse device?
    You are able to use an external USB mouse correctly?

    > but today I tried to install something digital crafts for my daughter and during installation it tells you to insert the thing into the USB port and click Next, when I do that he's going through a lot of "research" and said then it can not be found.
    I guess this could be a problem with the software or drivers installed.

    I searched a bit and his city that he has a software is compatible with windows vista/2000/xp. Win 7 is not mentioned do not know if this could be a problem, but in your case, I recommend asking the support of this software product for some advice.

    In addition, you can try to install this software once more, check whether this USB problem appears again.

  • Satellite U300 connected to the TV - video format not supported

    I am using Toshiba Satellite U300-15 q and it has a vga output, so I bought a cable and a box that transfers analog signal to VGA to hdmi digital so that I can connect to my Sony TV are 32 '.

    But if I connect it it says on the tv in video format not supported in yellow letters.
    Why is this and how do I solve this problem?

    Throughout history the problem is you are using third party hardware or software so described this issue has nothing to do with your laptop computer Toshiba or Toshiba in general.

    On the mobile side is important, the video signal is sent to the right path. What will afterwards and why this signal is not transformed correctly falls within this box.
    What box are you using?

    In my opinion you should contact the manufacturer of this box and their support. They should know how it works and how to solve this problem.
    In General, Toshiba has nothing to do with this problem.

  • Satellite P300 connected to the WiFi router, but no internet connection

    Help!

    I have a Satellite P300 installed with Windows Live Onecare... and a netgear Rangemax wireless router
    I have no idea as to overcome this problem... I just moved house and it worked just dandy in the old place

    Any suggestions would be greatly appreciated.

    Thank you

    Hello

    If everything worked correctly in your old House, then I guess there is no problem with the laptop but the router is simply not configured property or there is a problem with your ISP (internet service provider).

    Maybe you should get in contact with the ISP and need to check if the connection is ready and available!

    Welcome them

  • Satellite A60 - connected to the WIFI but can't get on the WEB

    Hello

    I have a really strange problem with my Satellite A60. I have a US robotics wireless router. I can connect with my laptop, in the sense where it says that it acquires an IP address and then he said: it is connected, but then it is not possible to browse the web or access to the router. Let me also point out that:

    -The internet connection works fine if I connect the laptop to the router via a cable (for example, I can access the router)
    -J' have a second computer that is connected via WIFI to router and it sees no problem (it goes up an adapter for US Robotics)
    -WEP encryption is active, but I'm sure that the key is correct. I also try to disable but did not help
    -MAC address filtering is enabled, but the laptop WIFI card is in the list. I also tried to disable content filtering, but it did not help
    -J' also tried to remove the encryption and MAC address filtering, but it did not help
    -In past I could connect to other networks WLAN with my laptop

    I hope that I have provided sufficient detail so that someone can try to help me.
    Thank you in advance!

    Hello!

    I think that the integrated firewall router and dhcp server integrated are the first things to check. May be there are separate configuration for Ethernet and WIFI connections options. Check if your wireless connection is "default gateway" address when the computer shows that it is connected to WIFI. If no default gateway address is then most likely it's dhcp or confiuration problem your router firewall.

  • Satellite L500 - connected to the temporary file

    Hello

    can't access my files, just keep being connected to Toshiba of temporary files. AV run the diagnostic tool and there is no hard drive.
    Not a bit of computing...

    I can solve this problem?

    Sorry mate but to be honest I don't know what you're talking about.

    If there is some kind of problem in the system, I recommend you connect by using the 'safe Mode' (while applying power, press F8 → and then choose: safe mode)

    Run the system in Mode without failure, you would be able to access the files on the system, but also of other personal data...

  • Satellite C650 - reinstall with the new hard drive

    Hello

    The hard drive in my C650 just died so I put in a replacement, and the problem I have is that I never create a recovery disc for my laptop.

    I tried to use the windows disk 7 I got with my desktop, but when I boot it I get the error ' A required CD/DVD drive driver is missing. If you have a flash driver diskette drive, CD, DVD or USB, please insert now. ".

    So, I downloaded the driver for chipset support page and excerpts to a flash drive. The installation detects these drivers "ICH9" on my USB, but after loading them, I always get an error ' no new deices could be found. Make sure that the driver files are correct and located on the driver installation media. ».

    I checked the bios and the new hard drive is detected without a doubt.
    Is there anything else I can do, short of ordering toshiba recovery disks?

    Thank you!

    Hello

    The message
    > ' Required the reader driver CD/DVD is missing. If you have a flash driver diskette drive, CD, DVD or USB, please insert now. ".
    say that your CD/DVD drive is not detected.
    So you need to check if the BIOS so the CD/DVD drive is listed. It should appear on the first page of the BIOS.

    If you want to boot from the disk and then switch on and you press F12.
    Usually, a menu should appear that allows you to choose the ODD (CD/DVD)
    Choose this option and try to boot from the CD.

  • Satellite L350 - connected to the bridge with limited access

    Dear community,

    The proud owner of a L350, this weekend.
    Since then, trying to make wireless connections to my Linksys WRT54G Router.

    Still no luck. I don't see the SSID on the radar, but for some reason, that my laptop computer does not receive the correct ip addresses to my router to access the internet.
    Laptop is equipped with an Atheros AR5007EG wireless network adapter.

    Is there someone who is familiar with it and got it work?

    Faron

    Hello

    In my opinion, you should try to update the WLAN driver. You can find the latest version on the Toshiba site.

    Have you also tried static IP addresses? You need a correct IP address because otherwise it of not possible to connect to your router.
    Maybe firewall blocking something?

  • Satellite - cannot connect to the Internet

    I just bought a new 750 Satalite, it was working fine, then yesterday the internet wireless connection abandoned and now used to connect again. I have other laptops and they are connected to wifi.

    Someone at - it ideas?

    Hi Vanessa,

    You can't find your new laptop the router or not?
    The wireless network adapter is listed correctly in the Device Manager?

    Maybe something stupid, but did you check if the wireless network adapter is always enabled? You can press key combination FN + F8 to toggle the WIFI connection.

    Check this box!

Maybe you are looking for

  • Sub - vi appear as appellant

    Hi all I've written a vi file that calls a subvi. For some reason (it never happened to me before), when I open the main program (the appellant), the sub - vi opens as well. It really becomes a problem when I use the exe of the main VI version becaus

  • Control Panel reference and component

    Hello all,. I wanted to get all the references of all the controls in the front panel, I was assuming that the order of Favorites will be identical to the order in which they were created, it was true, if I use VI-> side-> control reference but when

  • I just 14 Chromebook. Cannot run the Chromebook recovery utility, says 'invalid model number.

    I just new Acer Chromebook 14, but I am unable to make a recovery disk. When I run Chromebook Recovery Utility, it says 'invalid model number. Is there another way to prepare a recovery disk? Thank you

  • 655 HP: update Wi - Fi 5 GHz

    Hi, I would like to upgrade my Wi - Fi 802 interface. 11 b | g | n with channel 1 and 2.4 GHZ frequency to 802. 11A | g | n and 5 GHZ because of a new router frequency I had installed. Is this possible?

  • How can I keep the connection

    Hello. I have the following situation. I'm developing an application using a Web server to authenticate users, when a user is authenticated to create a session that I use to conduct several operations. Problem: When the user using the application by