Satellite C660-173 is not all start

Hello

I have a Satellite C660-173, the laptop was working fine yesterday, but today I tried to boot the machine and the screen is completely black, I can hear the fan turns and then after say 30 seconds, it turns off.

Have removed the battery and pressed the button for 30 seconds and reconnected everything with the same result, we know what could be the problem?

Thank you

>... the screen is totally black, can hear the fan turns and then after say 30 seconds it turns off.
It sounds pretty bad and for me definitely as corrupt BIOS. You have maybe updated BIOS or done something that may be responsible for this?

Tags: Toshiba

Similar Questions

  • Satellite C660-108 does not start if the USB Bluetooth dongle connected

    Hiya,

    I hope you could help me.

    I'm having a problem with my dongle bluetooth and satellite c660-108.
    It all works perfectly. It connects devices via bluetooth and I can do whatever I want.

    But then when I'm mobile stop and turn it on again it will go if the bluetooth dongle is always in the USB.

    I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
    I have to turn it off, remove the bluetooth dongle and then turn it back on.
    And then windows starts. After that, I put in bluetooth dongle, once again I want to work with her.

    It isn't a huge problem, but it is a bit annoying when I have to leave the bluetooth and put it back again to get the windows began.
    I'm running under win 8.1 but he already had with 8 victory.

    Anyone any ideas?

    > I see Toshiba screen and then it hangs with a black screen and a cursor flashing at the top left.
    Especially the blinking cursor is displayed because the laptop can not find a boot device.

    It seems that the device cannot put on the HARD drive while the USB dongle is connected.
    I would recommend you check the boot order in the BIOS.

    Put the HARD drive in the first place and the USB boot last device.
    Save changes and check if it helps.

  • The function in my Satellite C660 key does not work

    The function in my Toshiba Satellite C660 key does not work except volume.
    This problem appeared after I changed something in startup and programs uninstall that I can remember pvat and no support of the button appears in my programs startup :(

    Please visit Toshiba on http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp download page and download the latest package added Toshiba economical for your laptop model.

    Remove the preinstalled version, restart your computer and install the latest version.
    After doing this it works again.

  • Satellite C660-2EL does not start

    Hi guys,.

    After a few days full of frustration here I am.

    I am working on a friends Satellite C660-2EL
    He was stuck in the endless loop of boot Win 7 and would not be recovered by any means.

    So I decided a format was the way to go.
    After the format using partition magic everything's fine.
    I reinstalled Win 7 and the installation was also fine. Once the installation is complete, and it's a reboot that I decided to jump into the BIOS and change the order of boot if I put the CD Drive first. If after changing the settings and then save and quit this crap won't start at all now, no CD HD or anything else.

    The toshiba screen flashes upward, but when I hit F2 now it freezes just tell to get into Setup.
    When I try to hit F12 the screen goes back to the blinking cursor.
    If I press anything I get the white screen with the cursor.

    I saw a video on you tube to reset the CMOS, I tried it work with no luck.

    Any ideas guys?

    Hello

    You want to say you have a cursor blinking in the upper left corner and the unit does not start CD or HARD drive?
    The blinking cursor is above all a sign of failure of the HARD drive.

    I recommend that you check the HARD drive with the help of a tool (freeware) called Drive Fitness Test.
    This tool creates a bootable disk that scans the HARD drive for malfunctions.

    If the HARD drive's fault, it be replaced

  • My Satellite C660-1UJ does not start

    Hello people,

    My laptop Toshiba Satellite * c660-1uj starts up.

    It does nothing when I press the powerbutton.
    When I connect the poweradapter I hear a clicking sound, as it is with or without the battery and I also see the light (led) battery flashes green.

    I think it has something to do with my motherboard, but I'm not sure.

    I would like to be sure before you buy a new.
    Does anyone know where the problem is and how to fix it?

    Thanks in advance.

    Kind regards

    Sjoerd

    > I think it has something to do with my motherboard, but I don't know.
    Yes, I think that this problem could be related to problems of motherboard.
    But this would be the worst case, given that the new motherboard is very expensive part I gues guarantee is not valid?

    But why you put the memory t-test? Faulty RAM memory may prevent startup laptop and power. Replace the RAM module is not very difficult.

    Of course, you would need to buy new modules for verification, but maybe you could visit some technicians computer/laptop to downtown who could test the device with new RAM modules.
    In this case it would be pointless to buy the parts for testing purposes only.

  • Satellite C660-268 does not start, no start screen

    My laptop Toshiba Satellite C660-268 was installing updates, then it froze for half an hour, I decided to force quit by pressing the power button.

    I tried power, portable could not wake up, I can hear the fan but screen is not black, no post/splash screen (Bios screen), turn on the led goes for a few seconds and then turn off. I tried to press the important function, but nothing could make my laptop boot or stay on. Please,

    I need your help in order to remake my boot laptop

    I think that some of the material died during update installation.
    From my point of few, it was simply bad luck that this error occurred during the update of the system.

    There is only one real solution: the troublemaker should be found and replaced.

    Theoretically, this issue can result from memory problems, but also the failure of the motherboard. The RAM modules are not very expensive and where the RAM is faulty, the fix is not a big problem.

    But in case of malfunction of the motherboard, the laptop repair could be a very costly affair.

    What could be the next step?
    I think if you have no experience of mainframe, you should seek some professional help and assistance.

  • Satellite C660-117 - does not start, does not load

    Hello

    I have a laptop Satellite C660-117, and recently I had problems with the power with her. I found that it is capricious, when it comes to the charge, and recently I have if he had sat in one place that I knew would charge like that, she decided to carry the laptop elsewhere and because not able / load power since the battery down dry. I have not tried to reconnect where I had initially (and it is not really appropriate that she be sitting in one place, mainly because it is partially in the way of a desktop system).

    I tried various things, taking the battery and the AC adapter on, leaving for awhile, then connect their return and also to get out them, by pressing the power button for 30 seconds and in reconnecting him back, but the problem seems to be between the power adapter and the laptop itself (no power is going to the laptop of the sector). I also tried to use a different power adapter from another laptop, but it did not work either.

    I was wondering if there was another option that I could try, or if I'm stuck with having to buy another laptop, as it is waaaaaaaaaaaay out of warranty. I'd rather not go for this option, nor can really afford to send him off for a while to be repaired because of the time it would probably.

    Thanks in advance!

    If the laptop can't run with AC power only there is a problem with electronic power supply to the motherboard.
    Sorry, but these questions, you need professional help. Problem is that the remedy will be quite expensive.
    So perhaps the best solution for you is to sell it on ebay because several pieces of equipment can be used for replacement and buy new laptops.

  • Satellite C660 - 2L 9 - unable to start Google Sketchup

    Hello

    First of all, I would like to excuse my English, I'm French.

    I bought a Satellite C660 - 2L 9 and I'm not able to start Google Sketchup.
    It always freezes. What could be the problem?
    I did all the updates of avialable and he keeps does not.

    Here is a summary of the configuration.
    Can someone help me please? Is it because of the graphics card Intel?
    Thank you very much!

    -------------
    Operating system
    Windows 7 Home Premium (x 64) (build 7601) Service Pack 1
    Default web browser: Mozilla Firefox
    Default e-mail client:
    WinSAT
    Notes General 4 (processor: 6.8, RAM: 5.9, graphics: 4, game graphics: 5.1, disc hard pr)
    incipal: 5.9)
    Motherboard
    SMBios version 2.6
    TOSHIBA PWWAA 1.00
    BIOS: TOSHIBA 1.90 size 10/01/12: 2048 Kb
    Chipset
    Northbridge: Intel Havendale/Clarkdale Host Bridge
    Southbridge: Intel HM55
    Processor
    Intel Core i3 380 M Arrandale Socket 989 rPGA (@32 nm) 2533 Mhz (L1I: 2 x 32 KB, L1D: 2 x 32 KB, L2: 2 x)
    256 KB, L3: 3072 KB)
    Memory
    Total physical memory: 4096 MB, Type: DDR3, @MHz, 7.0 - 7-7-20-1 t
    DDR3 Samsung M471B5273CH0-CH9 4096 MB, PC3-10700 (667 Mhz)
    Graphics card
    GPU Intel(r) HD
    CD/DVD players
    HL-DT-STDVDRAM GT51N SB02 (DVD-RAM Recorder)
    Hard drive
    TOSHIBA MK6475GSX
    PCI/AGP cards
    Storage
    Intel Corporation: 5 Series/3400 Series Chipset 4 port SATA AHCI Controller:
    Network
    Realtek Semiconductor Co., Ltd.:RTL8101E / RTL8102E PCI Express Fast Ethernet controller:
    Realtek Semiconductor Co., Ltd.:RTL8188CE 802.11b/g/n WiFi adapt:
    Display
    Integrated graphics controller of Intel Corporation: Core processor:
    Multimedia
    Intel Corporation: 5 Series/3400 Series Chipset High Definition Audio:
    Bridges
    Intel Corporation: Core Processor DRAM Controller:
    Intel Corporation: 5 Series/3400 Series Chipset PCI Express Root Port 1
    Intel Corporation: 5 Series/3400 Series Chipset PCI Express Root Port 2
    Intel Corporation: 82801 Mobile PCI Bridge
    Intel Corporation Chipset LPC Interface Controller: Mobile 5 series:
    Communications
    Intel Corporation: 5 Series/3400 Series Chipset HECI Controller:
    Bus series
    Intel Corporation: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller:
    Intel Corporation: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller:
    Intel Corporation: 5 Series/3400 Series SMBus Controller Chipset:
    Signal processing
    Intel Corporation: 5 Series/3400 Series Chipset Thermal Subsystem:
    USB device
    Composite of Alcor Micro Corp. USB device
    Alcor Micro Corp video USB device
    Entry USB device
    Intel Corp. integrated rate matching Hub (Generic USB hub)
    Intel Corp. integrated rate matching Hub (Generic USB hub)
    Well-tempered Clavier
    Toshiba Flash Cards Support driver
    Mouse
    Mouse HID
    Synaptics PS/2 Port TouchPad
    Screen (s)
    Plug-and-Play monitor generic

    Hello

    I think that you should first check the hardware configuration required for Google SketchUp
    http://support.Google.com/SketchUp/bin/answer.py?hl=en&answer=36208

    Recommended hardware
    2 + GHz processor.
    + 2 GB OF RAM.
    500 MB of available disk space.
    Class 3D graphics card with 512 + MB of memory or more. Please make sure that the video card driver supports OpenGL version 1.5 or higher and up to date.

    It could be possible that your display driver (graphics card, driver) does not contain the OpenGL and, possibly, the driver is not updated

    The driver must support OpenGL 1.5 or higher, otherwise, you will not be able to run the SketchUp.

    The unit seems to bear the graphic chip Intel HD (HM55) so you should be able to get the latest driver Intel Intel page.

  • Satellite C660-1J1 does not illuminate

    Hi guys!

    First sory about my English, I'm from Croatia

    I have the Satellite c660-1j1 for about 2 years now and never had any problem until 2 days ago, when he stops in the middle of work after which he used to shoot more. I tried to remove the battery and the ac power button and hold it down for 30 seconds, remove hard drive, ram etc. and did not help. I noticed that when I press start button / right stop green light flashes once and that's it... nothing another hapend... also, I noticed that it happens only when the battery is plugged... If I remove the battery and leave one plugged ac nothing happens... laptop completely died... also I tried plugging another adapter that I know it's working, and same thing.

    So I think something is wrong with motherboard or dc in the Jack cable and power supply.

    I would like to fix this myself if I need your opinion what could be a problem, so I can buy a right-hand side.

    I hope if someone knows this problem or knows what that means green flashing of led.

    Thanks in advance

    When you connect power AC is DC led on?

    > I would like to fix this myself if I need your opinion what could be a problem, so I can buy a right-hand side.
    I can't say for sure but I'm afraid there is an electronic power problem and I don't think that you can remedy only Mr. it is part of the motherboard. In the end you can't find parts for laptop easier with regard to jobs.

    In the past a guy from Croatia reported on the good service of Toshiba in Zagreb. www.mojservis.HR maybe you should communicate with the guys who work there and ask for help or advice.

  • Satellite C660 keyboard does not properly - multiple characters

    Hi all

    My keyboard does not work well.
    There is a keyboard lag and sometimes several characters are typed.

    Model is Satellite C660-PSC0SG - 01300L...
    Update the BIOS, I saw in a lot of forums but I could not find.

    Some ooone could help on this...

    Traorepaul,

    Naveen

    Hello

    You are right!
    The update of the BIOS could solve this as mentioned in this document from Toshiba:

    + Questions with the Satellite and Satellite Pro L670 & C660 series laptop keyboard +.
    http://APS2.toshiba-tro.de/KB0/TSB1103370000R02.htm

    Click on the link to the download page of the BIOS in this doc.

    Here you will find a BIOS update instruction:
    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=60

    Good luck

  • Re: Satellite C660-225 can not find the recovery files

    Hello

    I have a satellite C660-225 and you want to restore to its original settings by using the zero button. The recovery starts, but the laptop then said it cannot find the files to restore. But they are on the C drive and I made a copy on disk D.

    I don't have a recoverydisk. What can I do now?

    Thank you in advance,
    Plankie

    Post edited by: plankie

    Recovery image is usually original saved on partition D, as well as on some machines on the hidden recovery partition, but certainly not on the C partition.

    You cannot move files in recovery from one place to another piece waiting for everything works fine.

    In your case installation image of HARD drive recovery not working anymore.
    What you can do now is to try to create a recovery media using the method described on http://aps2.toshiba-tro.de/kb0/HTD4103KB0000R01.htm

    You'll be really lucky if it will work. Otherwise you can order the original recovery image on https://backupmedia.toshiba.eu/landing.aspx

    Good luck

  • Re: Satellite C660 - 29G does not detect wireless networks

    Hello.

    I own a SATELLITE C660 - 29 G PSC1LE, bought in Spain.

    Once shaped my development pc, I installed Windosws 7 64-bit.

    As I lost the DVD attached to the purchase of the laptop, I have downloaded all the drivers for my model based on the Toshiba site

    I installed all the drivers and the thing is that the wireless card is most recognized. I can´t see WiFi available.

    I connect to the laptop with a cable to get access to the internet and it works properly.

    Could you please help me?
    Thank you.

    You can first test what is the status of the WLAN card in Device Manager?
    Wireless network adapter installed and registered correctly?

    If yes do not forget the wireless network card is enabled.
    Please check and post comments.

  • Satellite C660 keyboard does not

    My keyboard has stopped working and after trying different things I've read in other forums I've went ahead and replaced it. New keyboard was working perfectly until now that all came back but slightly different...

    Original keyboard wouldn't let me type any numbers and letters, v, b, n, f, g, h, r, t, y, were dead, as well as the entire line of F1 to F10. The new keyboard worked perfectly, but now the mouse pad does not work and I get extra letters when I type 'R', I get r5y78 instead... ""vm"rather than m and fh rather than h...

    I don't know if it's a motherboard problem, but it's very strange that the usb keyboard and mouse work fine however new keyboard worked fine for about a week and now I use USB keyboard again...

    Any suggestions?

    Laptop model: Toshiba Satellite c660
    OS: Win 7

    Thanks in advance!

    Hello

    If the external USB keyboard works correctly, the keyboard controller should be OK. So I don't think his problem of motherbaord.
    I guess the new keyboard is too bad and you will need to get another try and you need to replace the keyboard once more.

  • Satellite C660 - microphone does not work

    Hi friends

    I have the Satellite C660 his microphone and external mic works not
    Can someone help me?

    There's active correctly micro (green check mark)?
    MIC is set as default device?
    Otherwise click with the right button of the mouse and choose options.

  • Satellite C660 now does not connect to the printer via Bluetooth

    I have a very small domestic network - 2 of the Satellite C660 using Windows 7 Home premium and a printer Photosmart more connected through BT Home Hub work all fine until a computer laptop suddenly cannot connect with the printer, well located 1 m from each other.

    Connection Internet is fine - and another laptop works perfectly. Message from the printer on statement failed, on examination, it simply records as "error."

    Any ideas of solution?

    Hello

    From this point it's hard to say what's wrong.
    In my opinion, you must reset all settings and configure the connection to the printer again.
    Reinstall the software that you have installed in the past.
    Also recommend check that the support from the manufacturer printer pages a few FAQ, HowTo, etc...

    Since your laptop can connect to the internet properly, it cannot be a laptop problem

Maybe you are looking for

  • Any benefit to have the Wifi and Ethernet simultaneously?

    There is better performance, have Wifi and Ethernet switched on at the same time? It seems strange that I can have both at the same time. Outside access to printers wireless enabled (which is not relevant to me), I would like to know if there is an a

  • Insert the 3D chart into a PowerPoint presentation

    Hello world! I would like to insert a graphic 3D object generated with LV in a Powerpoint document. So far, the copy of a static image isn't a problem, but I would like to power pan/rotate the 3D chart. Any idea?... Thanks for your help! CC

  • Reentrant PtbyPt increment

    Under the heading other PtbyPt functions, we increment Ptby Pt and decrement, PtbyPt.  Real estate execution VI, reentrancy is set to Preallocated incoming clone of execution.  Does this mean I can use VI to count several things? If this VI can be us

  • drivers for Pavilion 15-n003sq win 7 32-bit

    Hello I can't find drivers for my hp Pavilion 15-n003sq with a win 7 32-bit operating system. Help, please! Below are the IDS of material for the non working devices: Network controller - hardware id:PCI\VEN_8086 & DEV_08B1 & SUBSYS_40628086 & REV_63

  • Archive purge logs

    Hi allEBS R12.2OL6.5I have the main and backup database. In elementary school when I complete rman backup daily and overlap remove obsolete, old archivelogs are purged.But on the side of the day before, I do the same thing but the archivelogs are not