Satellite C660-108 does not start if the USB Bluetooth dongle connected

Similar Questions

• Satellite C660-108 does not start with 8 GB of RAM

  I bought 2 x 4 GB memory modules to upgrade memory up to 8 GB.
  With 8 GB installed, the laptop does not start, but he will start with 6 GB installed.
  Modules 4 GB 6 GB configuration and wood East of 1.8.

  Any ideas?

  Hello

  According to the manual, this laptop can be upgraded up to 8 GB of RAM.

  Then you should be able to use the 2 x 4 GB RAM modules

  I think that both modules are not compatible with each other and therefore cannot boot up the laptop.

  You should test the laptop with the help of other modules.

• Satellite A660-186 does not start when the USB nano-receiver is connected

  Recently I bought a mouse a4tech g7-750 with the nano-receiver into usb port plug.
  After the nano-receiver is inserted into the USB before lighting, computer laptop does not start.

  Only the cursor is displayed, so that it is displayed before the screen with the ability to enter the F2 BIOS or select the F12 boot device.
  Without the nano-receiver laptop runs without problem.

  Any advice?

  Thank you much in advance.

  Hello

  During the POST (power on self-test) all parts laptop as RAM, motherboard (also of connected devices) is enabled.
  If a problem (compatibility problems, etc.) would be detected during POST, then the laptop would not initialize correctly.

  This mouse nano-receiver is unknown to me and I m not very well what s wrong with this unit, but I doubt that this problem is related to the laptop.
  I guess that the laptop starts properly with other devices connected to the laptop. right? Well well, in such cases, there s no question cell phone but the 3rd unit affect the functionality of the laptop.

• Mini 311 does not start if the usb device is connected

  Hey, I just bought a HP Mini 311 and everything has been great so far except for this issue.

  Whenever I try to start the Mini 311 with my receiver Logitech wireless mouse connected by USB, the netbook will just freeze on the HP Logo.  When I unplug the USB dongle, it starts very well.

  I hope that someone would know how to solve this problem?  I tried to find a way to fix it by the BIOS, but so far nothing's worked.  Thanks in advance!

  Hi guys I had problems of CAs with my mini was diging place difficult. The problem is in the BIOS. This is so a few "patches" for bios or smth. Eventualy steals my mini, no booot or other problems so far. IM using F04 BIOS is a bit.

  OK, is the link for more info: http://myhpmini.com/forum/viewtopic.php?f=62&t=2898

  Let me know if this helped.

• Satellite C660-2EL does not start

  Hi guys,.

  After a few days full of frustration here I am.

  I am working on a friends Satellite C660-2EL
  He was stuck in the endless loop of boot Win 7 and would not be recovered by any means.

  So I decided a format was the way to go.
  After the format using partition magic everything's fine.
  I reinstalled Win 7 and the installation was also fine. Once the installation is complete, and it's a reboot that I decided to jump into the BIOS and change the order of boot if I put the CD Drive first. If after changing the settings and then save and quit this crap won't start at all now, no CD HD or anything else.

  The toshiba screen flashes upward, but when I hit F2 now it freezes just tell to get into Setup.
  When I try to hit F12 the screen goes back to the blinking cursor.
  If I press anything I get the white screen with the cursor.

  I saw a video on you tube to reset the CMOS, I tried it work with no luck.

  Any ideas guys?

  Hello

  You want to say you have a cursor blinking in the upper left corner and the unit does not start CD or HARD drive?
  The blinking cursor is above all a sign of failure of the HARD drive.

  I recommend that you check the HARD drive with the help of a tool (freeware) called Drive Fitness Test.
  This tool creates a bootable disk that scans the HARD drive for malfunctions.

  If the HARD drive's fault, it be replaced

• Satellite Pro 460 does not start with the new drive in

  I recently received a Satellite Pro 460, but he had no hard drive.
  It starts great without a disc in but as soon as I put a new hard drive in it does not start.

  I thought that it might be again a hard drive, so I pulled out my old Toshiba Satellite with my old drive to work, and yet, it does not start.

  Someone has any ideas why this is and what I can do about it

  I think that you can not do much. Satellite pro 460 CDT, for example, comes with 2 GB of HARD drive. If you try to get it work with similar HDD without success, it may be defective IDE port on the motherboard.

  What HARD drive you are trying to use on this good old classic?

• Satellite A30 does not start with the USB device connected at boot time

  Hello

  I have a Satellite A30 and sometimes it does not start.
  After turning on, not even the BIOS starts.
  even if sometimes the BIOS starts, but the OS does not load.

  I figured out that its related to USB devices connected at boot time.
  If no USB devices are connected, it starts without a problem.
  Even if the start-up is suspended, as soon as you unplug start it BIOS USB devices.
  Its ok to connect USB devices later, once the system has started.
  I disabled "removable devices boot" and "network startup."
  just in case, but it makes no difference.

  BIOS is version the most recent (1.70) and it comes up with all kinds of USB devices.
  printer, mouse and (self-powered) external USB hard disk.

  Is this a known issue?
  There is no known workaround solution?

  Hello

  I put t know why this happens, but it has to do with the BIOS.
  The same thing happened on my old laptop. I couldn't start my unit while the USB printer has been turned on and connected.
  The only solution is to disconnect the external USB device during the boot process.

  RSY you should check if the order of boot in the BIOS has been on the HARD drive first.

• Satellite L500-1TC - does not start and the screen stays black

  Hello

  I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
  The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
  No idea what I can do?
  The warranty is still active, so can I send it to Toshiba?
  Kind regards
  Sven
  (Sorry for my bad English)

  Hey Buddy,

  What you can try before you contact Toshiba official service is the following:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

• Satellite 1800-814 does not start if the power adapter is plugged

  Hello
  I have a problem with my 3 year old, 1800-814.
  It all started with the sudden Windows crashes. He ran sometimes smooth, sometimes he just hung up. So I decided to reinstall the laptop. My problem is when it is plugged by pressing the power on button does not start the laptop. Just the green light is on nothing else happens. Sometimes it starts after a wait of 3 or 5 seconds. On battery it starts every time. What can I do? A defect material or just dust somewhere?

  Thank you

  Jens Grieger

  Hello

  It could also be something wrong with the electronic power supply on the motherboard.
  It s is not possible for the user to fix it. In such cases, the best way is to contact Toshiba service in your country.

• Satellite U300-13U does not start and the recovery disc fails to too much work

  Hi all

  I have the above computer (or should I say my wife) & it is nothing that a good pain since the first day we got it.
  I have had it about 2 years & had to reformat the HD at least 6-8 times using the product recovery disc as laptop starts.
  The laptop runs Vista.

  In any case, problem I have now is that new laptop does not start, but for some reason any product recovery disc also does not work...
  What I can do...

  I have read on various forums that it might work if I reformat the HD first using some s/w on a bootable CD but how / what S/W can I use...?
  The laptop has a SATA HD 160 GB installed. How can I check that it all works.
  I don't know if the current problem is S/W or related material...

  Toshiba has a utility that I can use...?

  Thanks a lot for all the help...

  John

  Hello

  What happened exactly?
  Do you receive error messages by using the recovery disk?

  Check if the HARD drive is OK! You can check in the BIOS.
  If the HARD drive is listed in the BIOS then the HARD drive and HARD drive found BIOS is not dead.

  Usually, you might start Notepad with the help of a Live disc for example Bart PE
  It s a bootable windows CD/DVD live

  http://www.nu2.nu/pebuilder/

  This can allows you to format the HARD disk, and then use the recovery disc!

• Windows does not start with the second internal HDD connected

  Hi all, I recently got around a few major problems with a new buuild, but I found another issue. Windows does not start with my connected storage disk.

  hard drive 500 GB of important data that I can't save on it and need access. It is a hitachi drive, which works fine on other systems but usually works in this one. any suggestions are appreciated, thanks in advance

  fixed the problem of swapping of sata ports and reconnect the cables, thanks for the advice but

• My Satellite C660-1UJ does not start

  Hello people,

  My laptop Toshiba Satellite * c660-1uj starts up.

  It does nothing when I press the powerbutton.
  When I connect the poweradapter I hear a clicking sound, as it is with or without the battery and I also see the light (led) battery flashes green.

  I think it has something to do with my motherboard, but I'm not sure.

  I would like to be sure before you buy a new.
  Does anyone know where the problem is and how to fix it?

  Thanks in advance.

  Kind regards

  Sjoerd

  > I think it has something to do with my motherboard, but I don't know.
  Yes, I think that this problem could be related to problems of motherboard.
  But this would be the worst case, given that the new motherboard is very expensive part I gues guarantee is not valid?

  But why you put the memory t-test? Faulty RAM memory may prevent startup laptop and power. Replace the RAM module is not very difficult.

  Of course, you would need to buy new modules for verification, but maybe you could visit some technicians computer/laptop to downtown who could test the device with new RAM modules.
  In this case it would be pointless to buy the parts for testing purposes only.

• Satellite 1800-712 does not start with the new HARD drive

  Hello world.

  I am currently trying to install a new HARD drive in my notebook of 1800-712.
  I'm having a few trubbles as my Satellite won't start with my new HARD drive.

  I upgraded my BIOS to the latest version.
  The new HARD drive is a 40 GB Samsung.

  Any suggestions on what I need to do to make it all works?

  THX, Philippe

  Hello

  This device was shipped with 20 GB HARD drive.
  You again is 40 GB.
  I guess that the BIOS does not recognize the HARD drive because of the size.

• Satellite 1800-814 does not start after the installation of the software

  Hello
  If I pass on my old Satellite S1800-814, it seems to start correctly: it shows the symbol of "Toshiba", then "Windows XP loading", then the screen goes completely blank, followed by a black screen showing the cursor that I am able to move. The hard drive continues to hum as usual for a few seconds, but then begins to repeat a series of clicking noises, somewhat like a disk that is stuck. The boot process is not still engaged.

  Here's the context: I installed my (old) version of Avid Xpress Pro editing software on my Satellite 1800-814. I managed to install a newer version, even if it does not function effectively, where my attempt to install an older version more closely adapted to the processing speed and the size of the RAM 1800-814. I got the usual warning at the end of the installation program of Avid saying that Windows can be affected if I let the installation ends in letting the computer on. But I pressed the option "continue anyway" (as I've done it before without negative effects). The computer off, but he came in as described above. Please tell me what I broke. Can I ever solve this?

  Thanks for your help.

  Hello

  Try to start your computer in safe MODE and try to remove preinstalled software. Please report the results.

• Satellite C660 - keyboard does not work but the Num and caps lock shift are on

  I have a Satellite C660 which was working fine this morning. When I came home from work and he turned, the keyboard does not work and therefore can not enter my login information.
  The Num and caps lock shift are turned on.

  Any ideas on how to solve this problem?

  Hello

  You are able to disable the CapsLock and NumLock?
  You can access the BIOS by pressing F2 by turning on the device?

  If this does not work, I would recommend checking an external USB keyboard.
  If the USB keyboard would be functions, then this means that the internal keyboard is defective and must be replaced.