Satellite C660-24F: win 10 BSOD - system thread exception unhandled

Similar Questions

• Windows 8 upgrade fails with BSOD - system Thread Exception no Handelled (aswndisflt.sys)

  I'm trying to upgrade to Win 7 ultimate SP 1 x 64 to Win 8 pro.

  "Getting Ready" reached 100%, reboot the laptop and then during windows start screen BSOD appears saying "System Thread Exception not Handelled.

  Happened 2 times, the upgrade of the restorations for Win 7

  BlueScreenView said "caused by the pilot - . Ntoskrnl.exe "" "

  My dump files:

  Empty 1

  Dump 2

  Yes, I realized that after I posted the question. The BSOD declares a different file name (aswndisflt.sys) which is connected to avast. Already deleted and the upgrade is now beyond the point where it crashed earlier.

  Thanks for your comments though

• Satellite L750 - upgrade Windows 10 - system Thread Exception unhandled problem

  I have a L750 Satellite that was originally installed with Windows 7 and recently installed Windows 10
  . The PC is saying 'Thread not managed system exceptions.

  I tried to update the display driver which has not helped the problem.

  Try to uninstall the graphics since the device manager driver and restart the laptop.
  After the restart, return to Device Manager and choose the graphics card.
  Let Windows search for the new GPU driver.

• Cannot access the Setup of the BIOS on my Satellite C660-24F

  I can't access my computer laptop Bios Setup - when I pres F2, F11 or F12

  * Satellite C660-24F PSC1NE *.

  He only statup Windows can't access the BIOS boot menu. I looked BIOS updat for my Satalite C660-24F - PSC1NE model - and I have not found on this web site.

  Can someone help me please?

  Have you changed the settings in BIOS?
  You may have turned on option quick start?

  Please do not forget that do you close regular. Also test F8 option.

• Satellite C660 - continues to enter the system repair

  Can someone help me?

  I have a Toshiba Satellite C660. Yesterday, it crashed. When it restarted, it went in the repair of the system and whenever I rebooted, it entered the system repair. Don't know if it is relivant but I get a windown come with drvload.exe back.

  So I did a factory restore hdd thinking this would clearly be the problem, but it didn't. Now I always get a repair system each time I do updates of mircosoft when I restart, more I can't hardly open programs like firefox, add and remove programs.

  I now use a check of HDD to see if I have bad sectors, have also scan mcfee which showed no virus.

  Any suggestions would be grateful because do not know what to try next.

  Thank you very much

  Hello

  > So I did a factory restore hdd thinking this would clearly be the problem, but it didn't.
  That would mean he s no malfunction of the software and the problem seems to be hardware related. HARD drive recovery can restore the original settings of the software box and they are pre-tested by Toshiba. So, theoretically, he could be sector failed HARD drive, RAM failure or something else

  > Now, I always get a repair system each time I do updates of mircosoft
  This would mean that the problem appears only after Windows update or I understand something wrong?

• Satellite C660 - 1ZM Win 7 64-bit: carpet of mouse and USB - 'code 52' driver error

  Hello

  Having recently set up a new Satellite C660-1ZM running Windows 7 64 bit (upgrade from Home Premium to Ultimate) for a friend, the mouse pad and USB ports have suddenly stopped working. Pilots show an exclamation against them and the error is 'code 52' associated with the driver signing. Windows does not seem to recognize the signatures of the drivers for the published drivers that came pre-installed machine disk, so the devices do not work. I've updated the drivers (chipset Intel [which includes USB]; Synaptics touchpad) to the last published on the Toshiba web site - and we have the same problem.

  By pressing F8 at startup allows you to select "disable driver signing checking" in WIndows 7 boot options, which allows the drivers and all is going well, until you restart - how you must press F8.

  I think that among the many Windows updates has somehow messed up things, but we cannot prove easier than. The machine has been running for a week or two, then the mousepad suddenly stop working around August 8, 2012.

  (1) are there valid signed drivers who spend some Microsoft controls required for signature, including any controls they have potentially just imposed by some recently imposed update drivers?

  (2) does anyone know exactly how to disable the verification of signature permanently, drivers so a reboot will not require F8 key pressure and so forth?

  Uninstalling the mouse pad driver and reboot gives the basic functionality of the mouse, without the skill of Synaptics. However, the USB ports don't always work because their driver does not load, so an external mouse does not work.

  It's a hellish nusiance. The system of the keyboard to uninstall the drivers etc at the wheel is not fun.

  Cheers, Colin.

  Hello

  Have you received the error windows cannot verify the digital signature for the drivers required for this device? This means the error code 52
  Given that the USB drivers are parts of the Windows operating system, I don t think that this could be a signature issue I think that some files are damaged.

  Try to uninstall/reinstall the driver and remove the unit and it s drivers in Device Manager before you reinstall.
  Normally this should help, if not, well try to repair the system.

  Switch on and press F8. Then choose fix my computer.
  Now, choose the first option that would fix the system.

• Satellite C850 - Win 10 Update aborted - SYSTEM THREAD EXCEPTION NOT HANDLED

  Hello

  It is with C850

  Whenever I try to do the upgrade, first it works very good. Everything is downloaded and the installation begins. At the end until he has achieved success, I become this appear. It restart Ant try again, but I got the same screen, it restarts and work on the recovery of win 7, afterthat I have win 7 recovered and can reuse my pc. But I used to win 10. Why is this happening?

  How can I solve this problem?

  I searched and tried to fix it, but did not find anything on this subject.

  The text is in German. The bing translation is:
  There was a problem on the pc. It must be restarted. some errors were collected, and then restart the computer to run.

  (20% complete)
  If you want more information, you can search for this error later online: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ndis.sys)

  

  The ndis.sys file is mentioned in your message.
  
  NDIS Network Driver Interface Specification

  For upgrade problems could be caused by the software / driver installed on your laptop.
  I guess that the question could be related to driver WLan or LAN driver...

  Maybe you need to uninstall one of the drivers before you start the upgrade to win 10.

• Satellite 1700-300: Win ME - invalid system disk - ERROR F3D failed

  Hello

  I have a Toshiba Satellite 1700-300 on windows Millennium Edition. Haven't used for a few years, but when I'm past it the other day the screen says: invalid system disk. I put in my laptop recovery disk, but he cut in halfway through with the message: ERROR F3D failed.

  Not really sure what I'm doing and really can't afford a new!

  Help would be thank you very much!

  Nice discussion on this error, you can find on http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=1255

  To be honest, I also think that there is a problem with the HARD drive.

• Satellite A300 - 1EC Win XP: BSOD during the passage of external display

  Toshiba Satellite A300-1ec almost new, with Win XP sp3, all updates, drivers of toshiba Web page

  When I use the extended via tv (s-video) output option, everything is ok.
  But when I try to change the display, extended (or any display mode double) to a single screen (laptop)... I get a blue screen

  He said something nvidia... but it's not very useful

  someone knows more?

  Hello!

  The Microsoft Knowledge Base, I found an article about this BSOD:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;827663

  In addition, I think it might be the hardware problem, in my opinion the RAM.
  Test the RAM with Memtest86: [www.memtest86.com]

  Maybe reinstall Windows to solve the problem.

  Good bye

• Satellite C660-125: Software Message: cooling system problem

  It has detected a problem with the cooling system please pay immediately the computer and return it for service

  This message appeared recently, pc works well and only bought last month, is an isssue of software and how can I solve this problem.

  Hello

  It seems that it is a software bug. You should recover the laptop using Toshiba HDD recovery or Toshiba Recovery disk that you create by using the recovery disk creator

  Usually the message should not appear in the future

  But don t be afraid if you didn t notice a higher temperature, and if the laptop only turns off automatically, then everything should be ok!

• HP Pavilion 17z: SYSTEM THREAD EXCEPTION NO MANAGED atikmdag.sys - NEW

  I had the problem titled with two new laptops. The first after less than 3 months of use... HP has finally replaced it and in less than 24 hours later the replacement began to do the same. Now I'm at square one. The case manager for that matter (that's happened since January 2015) wants me to go through all the procedures of same that I lived with the first (which took 3 months, by the way) before contacting him again.

  Countless telephone calls, technicians taking my computer three times sent in for repair to come back with the same problem and not once they TRIED uninstall and then reinstall the operating system.

  Seriously... is there anyone who knows if it is a problem of HP or Microsoft, and how can I get HP to fix it? I have seen the complex examples long on microsoft of people having the same problem but different notebooks... I really don't understand why I should risk trying to do this on mine when it's A BRAND NEW? COMPUTER

  Any help would be appreciated... Thank you

  BTW: At this point, I had just downloaded itunes, firefox, adobe flash and a few books of any audible official websites.

  Hello, I had this problem and for a year with my Toshiba Satellite laptop. According to me, that it has now been fixed.

  You can read my post about it here: http://allaboutboats.blogspot.com/2015/05/toshiba-satellite-and-bsod-error-system.html

  To make a long story short, I got the BSOD when using Firefox. I disabled the "use hardware acceleration when available" in Advanced Options and things that crashed 4 times that night worked OK then.

  I thought it was just a problem of Toshiba

  I hope this helps...

• 64 - bit Windows 8 (BSOD) system service exception error

  I couldn't connect on my laptop, after loading Windows, and then on the blue screen (BSOD).

  Please help me. Here are the files that you may need to help me.

  the Minidump files: https://onedrive.live.com/redir?resid=34DB0826A5470047%21107
  information system: https://onedrive.live.com/redir?resid=34DB0826A5470047%21108

  Thank you Microsoft... :)

  The same bug, check cause. Uninstall AMD/ATI drivers, restart. Later, do not install the version you keep installing and either try a beta version or the version until you have the problem before the update.

  Kind regards

  Patrick

• system thread exception managed not blue screen

  Hi support, I have problem blue screen when I turn on my computer...

  This is the report I got from nirsoft BlueScreenView

  050815-45234 - 01.dmp 8 May 15 20:20:02 SYSTEM_THREAD_EXCEPTION_NOT_HANDLED 0x1000007e ffffffff "c0000005 fffff880 '01748e52 fffff880' 00bf9508 fffff880 ' 00bf8d40 fltmgr.sys fltmgr.sys + 1e52 Microsoft Filesystem Filter Manager Microsoft® Windows® operating system Microsoft Corporation 6.2.9200.16384 (win8_rtm.120725 - 1247) x 64 fltmgr.sys + 1e52 C:\Windows\Minidump\050815-45234-01.dmp 4 15 9200 285 040 8 May 15 20:21:24

  Can someone help me?

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You need not run memtest again unless you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  
  

• BSOD: System Service Exception error

  Hello

  Since a few weeks I get a BSOD a few times a week, sometimes even 2 - 3 times a day.

  PC freezes and makes a weird sound on speakers.
  The only thing to do is to restart.

  It creates a DMP file, which I can't read with anything. only thing I see is incomprehensible.

  Can someone help me with this, because it can not be good for my pc.

  BTW, I did the thing check pilot as mentioned in another topic.

  I have the DMP files if someone can help out me.

  Thank you very much!

  KMODE_EXCEPTION_NOT_HANDLED (1e)

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  Bugcheck 1E, {ffffffffc0000094, fffff88003e698e8, fffff88003e698c0, fffffa80136b3000}

  1st argument is an exception, specifically 0xc0000094 - integer division by zero.

  0: kd > k
  Call child-SP RetAddr site
  fffff802 'a152fa68 fffff802' a177e98e nt! KeBugCheckEx
  fffff802 'a152fa70 fffff802' a16ca59d nt! KiFatalExceptionHandler + 0 x 22
  fffff802 'a152fab0 fffff802' a16f1fb4 nt! RtlpExecuteHandlerForException + 0xd
  fffff802 'a152fae0 fffff802' a16cc302 nt! RtlDispatchException + 0 458 x
  fffff802 'a15301f0 fffff802' a165d942 nt! KiDispatchException + 0 x 455
  fffff802 'a15308b0 fffff802' a165ad34 nt! KiExceptionDispatch + 0xc2
  'a1530a90 fffff880' fffff802 03e698e8 nt! KiDivideErrorFault + 0xf4
  fffff802'a1530c20 fffffa80'0 d 042301 bwcW8x64 + 0x38e8
  'a1530c28 fffff880' fffff802 03e691d7 0xfffffa80'0 d 042301
  'a1530c30 fffffa80' fffff802 of 0d0422b8 the bwcW8x64 + 0x31d7
  fffff802 'a1530c38 fffffa80' 0d0422b8 0xfffffa80'0d0422b8
  fffff802 'a1530c40 00000000' 000005a 4 0xfffffa80' 0d0422b8
  fffff802 'a1530c48 fffffa80' 0d0e0d58 0x5a4
  fffff802 'a1530c50 fffffa80' 0d0422b8 0xfffffa80'0d0e0d58
  'a1530c58 fffff880' fffff802 03e68c67 0xfffffa80'0d0422b8
  'a1530c60 fffffa80' fffff802 of 0d0423b0 the bwcW8x64 + 0x2c67
  fffff802 'a1530c68 fffffa80' 0d0422b8 0xfffffa80'0d0423b0
  fffff802 'a1530c70 fffff980' 5ce38d20 0xfffffa80'0d0422b8
  'a1530c78 fffff880' fffff802 03a9727f 0xfffff980'5ce38d20
  fffff802 'a1530c80 fffff980' 07bdec80 pacer! _report_gsfailure + 0 x 7
  fffff802 'a1530c88 fffff802' a18fc180 0xfffff980'07bdec80
  fffff802 'a1530c90 fffff802' a18fef10 nt! KiInitialPCR + 0 x 180
  fffff802'a1530c98 00000000 00000000' nt! KiInitialPCR + 0x2f10

  The driver who caused the thrown exception is bwcW8x64.sys which is the Killer bandwidth control filter driver.

  0: kd > lmvm bwcW8x64
  start end module name
  fffff880 '03e66000 fffff880' 040bd000 bwcW8x64 T (no symbol)
  Loaded symbol image file: bwcW8x64.sys
  Image path: bwcW8x64.sys
  Image name: bwcW8x64.sys
  Timestamp: Fri Apr 10 11:40:24 2014

  Yours is pretty up to date, so it is very likely a 3rd party driver with the network cause of NETBIOS conflicts.

  ------------------------------

  1. remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes, as it is most likely originally NETBIOS conflicts:

  -AVG removal http://www.Avg.com/us-en/utilities

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  2.

  0: kd > lmvm leafnets
  start end module name
  fffff880 '053e2000 fffff880' 053ef000 leafnets (postponed)
  Image path: \SystemRoot\system32\DRIVERS\leafnets.sys
  Image name: leafnets.sys
  Timestamp: Fri Apr 24 17:06:18 2008

  NetGear ReadyNAS/Leaf Networks network card driver (acquired by NetGear in 2010). Yours is almost 6 years, therefore, it is incompatible with Windows 8 (8.1). If no update is available, uninstall the driver ASAP + remove the adapter ASAP.

  Kind regards

  Patrick

• Help! Windows 7 BSOD System Service exception

  Fine thank you! I will update you later

  ~ Good day ~

  I look forward to your update!

  Kind regards

  Patrick