Satellite C660D - internal monitor does not

Similar Questions

• Link to BIOS 1.50 for Satellite C660D-13 q does not (404 error)

  Hello

  Link to 1.50 BIOS for Toshiba Satellite C660D-13 q does not (error 404) - file not found.
  How can I get this file after all?

  Who should I contact for this?
  Any help email address?

  Thank you

  You are right. the link says 404 error.
  To be honest, it is not for the first time something like this happens, but after a few days, everything was OK again.

  Try to download this update in a few days. I hope it will be fixed.

  By the way: you have a few problems installing the BIOS update should be made as soon as POSSIBLE?

• Satellite C850 - internal MIC does not work properly

  my knees thoshiba (C850 - B237) internal microphone does not work properly. I checked my record with webcam... but can hear the noise only... in the settings of the sound card, everything is ok... I also did the uninstall device driver and restarted... But the problem is still... Help, please

  You must mark the internal mic as the default device.
  This can be done in its tab → click right on internal mic to record and choose the default device

• Satellite C660d-102 Wlan does not appear in Device Manager - which driver?

  My Satellite C660d-102 wlan network adapter does not work it is not displayed in Device Manager...
  Which driver should be used to solve the problem?

  I am using Windows 7 64 bit on it...
  Tried my level best to install the wifi adapter...

  Please help: (...)

  Hello

  Laptop seems to support the Realtek RTL8188CE WLan card.
  You have the Realtek Wlan driver that you can download here.
  http://APS2.toshiba-tro.de/WLAN/

• Satellite 2450-201: monitor does not stay in place?

  Hi guys of

  I just wanted to know if anyone has a problem of monitor loose were the rear monitor folds and does not stay in place and is there a simple solution? Or this happens over time?

  Thank you

  Hello

  It sounds like a problem of mechanics monitor on you laptop.
  I don t think that you will solve this problem without any help from the technical person.
  I recommend you contact Toshiba service in your country. Explain the situation and I'm sure he will find a solution.

• Satellite A100: internal microphone does not work

  Well well, my type cell phone (or so it is said) is a Satellite A100, I have everything (I think) works fine, but it is only when I try to use my built-in mic phone the problem starts, it won't work!

  It is said there is a built-in microphone, but the bar will not move as he cannot hear my voice, even when I'm screaming! I tried on msn thinking it was a small problem, but he said that had heard no noise!

  It worked fine when I plugged my microphone in my webcam installed, but the problem is now, my older brother was and broken than microphone and I wanted that my only integrated to work but is not!

  He said that the microphone is a Realtek audio HD with SRS, so I need to know if anyone can help me with this? Please?

  Hello

  Could you post a detailed laptop Satellite A100-xxx name?
  It would be very interesting to know if the laptop supports an internal microphone or not.

  To my knowledge, some of the A100 don t support the internal mic and that is why you should use the external mic

• Satellite C660D-178 - Linux does not recognize the Bluetooth

  Hello!

  I just bought this laptop big. I do step by step installation of my linux machine :-).
  The wifi worked well, but the system does not see the bluetooth device.

  If I understand correctly, the bluetooth device is on the same chip as the wifi and I should load the ath3k kernel module, but nothing happens.

  Help, please.
  Here is the output:

  # lspci
  00:00.0 Host bridge: Advanced Micro Devices [AMD] device 1510
  00:01.0 VGA compatible controller: ATI Technologies Inc device 9802
  00:05.0 PCI bridge: Advanced Micro Devices [AMD] device 1513
  00:06.0 PCI bridge: Advanced Micro Devices [AMD] device 1514
  SATA 00:11.0 controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] (rev 40)
  00:12.0 USB controller: ATI Technologies Inc SB700/SB800 USB OHCI0 controller
  00:12.2 USB controller: ATI Technologies Inc SB700/SB800 EHCI USB controller
  00:13.0 USB controller: ATI Technologies Inc SB700/SB800 USB OHCI0 controller
  00:13.2 USB controller: ATI Technologies Inc SB700/SB800 EHCI USB controller
  00:14.0 SMBus: ATI Technologies Inc. SBx00 SMBus Controller (rev 42)
  Audio device 00:14.2: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
  00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host (rev 40) controller
  00:14.4 PCI bridge: ATI Technologies Inc. SBx00 PCI to PCI Bridge (rev 40)
  00:18.0 Host bridge: Advanced Micro Devices [AMD] device 1700 (rev 43)
  00:18.1 Host bridge: Advanced Micro Devices [AMD] device 1701
  00:18.2 Host bridge: Advanced Micro Devices [AMD] device 1702
  00:18.3 Host bridge: Advanced Micro Devices [AMD] device 1703
  00:18.4 Host bridge: Advanced Micro Devices [AMD] device 1704
  00:18.5 Host bridge: Advanced Micro Devices [AMD] device 1718
  00:18.6 Host bridge: Advanced Micro Devices [AMD] device 1716
  00:18.7 Host bridge: Advanced Micro Devices [AMD] device 1719
  01: 00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8102E/RTL8101E PCI Express Fast Ethernet controller (rev 05)
  02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)

  lsusb
  Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  Bus 002 Device 002: ID 04f2:b1d6 Chicony Electronics Co., Ltd.
  Bus 002 Device 003: ID 0bda:0138 Realtek Semiconductor Corp.

  > If I understand correctly, the Bluetooth device is on the same chip as the wifi and I should load the ath3k kernel module, but nothing happens.

  You are right, that the BT is integrated with the smart WiFi ATHEROS WB195-HMC
  I have not much experience of Linux but BT and WiFi must be activated by FN + F8 (using Windows)
  Eventually, you need to enable this as well on Linux

• C50-A-146 satellite's internal microphone does not

  Dear Forum,

  Yesterday morning my microphone internal on my C50-A-146 suddenly stopped working. It usually works no problem I use it every day via Skype.

  The microphone picks up now only static noise. It records the sounds when I press the microphone, and also when he jumped on.

  I tried reinstalling the audio drivers and checked all the settings sound and restored by default, but without success.

  Running Windows 8 and the laptop is only around the age of 7 months.

  Any help or advice would be much appreciated.

  Thanks in advance.

  > Running Windows 8 and the laptop is only around the age of 7 months.
  It seems that the laptop is still under warranty. So if the microphone hardware malfunctions, the laptop must be repaired for free.

  But before talking about hardware problems, I recommend you test different solutions of workaround.
  First of all I recommend you to check the parameters of the microphone within the healthy zone (Panel of-> sound-> recording tab).

  Here, you should see devices available and enabled.
  In the case where the internal MIC is listed, check if it s set as default device.

  In the case where you will find all the problems here, I recommend you to take the next step: HARD drive recovery.

  HARD drive recovery would fix the laptop back to factory settings.
  Note: before you perform this backup the personal data.
  To start the recovery of HARD drive, turn on the device, press F12 and choose the last option called HARD drive recovery.

  After this procedure, you must test the internal microphone again.
  If it will not work even if the laptop has been to the factory settings, the problem of equipment might be possible, and in this case, you should get in touch with Toshiba ASP in your country

• Satellite A200 - internal microphone does not work?

  Toshiba Satellite A200-1YU, model No. PSAE3E-06201VRU, Windows Vista 32-bit SP2

  I can't get working internal mic - no sound is recorded using sound recorder or Skype (external mic works if connected to the outlet of the façade).
  Realtek HD driver 6.0.1.6167 version (2010-07-28)
  Chicony USB 2.0 Camera driver version 6.2.238.1217 (17/12/2007), Chicony Camera UVC 1.7.175.0123 software version
  2.60 BIOS version has

  Any suggestions?

  Internal microphone is enabled on the properties of the recording devices?

• Satellite A210: internal microphone does not work do not with Skype

  Can someone please! I'm not that technical, but have an A210 and according to the manual it is built in microphone but I can't get Skype to work. Ive went through all the options available in my opinion.

  First - is there a microphone in this thing?
  I can't find any technical data say a definite yes.

  Control Panel - options of noise-24 h/24 shows a microphone and Realtek High Definition Audio is not plugged.
  Fact that medium and external microphone or...?

  Any help appreciated

  What a Satellite A210 model do you have exactly? Could you please send the model number located at the bottom of the unit?

• Re: Satellite Pro L500-1PU - internal microphone does not work

  I have a Toshiba L500-1PU, running on 32 bit Windows 7,
  The webcam works perfectly, but the internal microphone does not work correctly.

  I had an external microphone, so I had not noticed this problem when I am on Skype, but I recently discovered that when using the webcam of the person at the other end can hear weak my computer noises when I play music or watch a video clip.

  How can I fix this and get my microphone working properly I can control the volume and actually get a full service my laptop otherwise decent?

  Thank you

  Hello

  Perhaps this Toshiba FAQ might help you:

  + Hissing on the Satellite L500 +.
  http://APS2.toshiba-tro.de/KB0/TSB0402UB0001R01.htm

  It s are the parameters.
  This problem occurs if the volume of the microphone in the speakers properties is enabled.
  After you turn off this point the issue with Larsen is no longer in effect.

  I hope this helps!

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you

• Satellite C650 - 1 CT does not recognize the CD/DVD

  Hello

  I currently have a problem with my model Toshiba C650 - 1 CT (PSC08E-03M001EN) satellite. The laptop does not recognize the CD/DVD and a check in the "Device Manager", said a damaged device driver!

  Now, my problem is that I searched on the internet and also on the websites of Toshiba for the right driver, but no use. The device (DVD) opctical no not also appears in the list of devices 'removable '.

  System details:

  Satellite C650-1 CT PSC08E-03M001EN
  OS: Windows 7 64-bit
  Place/country: United Kingdom

  Assistance in finding the right driver or advice how to solve the problem will be highly appreciated.

  Thank you
  Lamin

  Post edited by: jammehkunda

  As first step try please remove the optical disc drive from Device Manager and restart your laptop.
  After doing this review please the Device Manager and let us know if the problem persists.

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• Satellite Pro A10 - Modem does not

  I recently reformatted my laptop using recovery discs. The internal modem does not work. It is recognized by the computer, but I get the message "the port that the modem is attacahed to could not be opened." This can be the result of a hardware conflict"when I query the modem in Device Manager. Also, in the Device Manager there is no indication of being recognized COM port. What can I do?

  Hello

  First I recommend you remove the modem from Device Manager, and then reinstall the modem driver.
  It is not necessary to assign any COM ports manually. After installation of the modem driver all have to be configured automatically. Do not forget that you are using the modem driver good for the country where you live.