Satellite C670-19F - 10 Windows - Webcam works only without installed drivers

Similar Questions

• my windows box works only in normal mode, cannot run in safe mode.

  my windows box works only in normal mode, cannot run in safe mode, in the fourth stamp corner with 'safe mode '. And when the loading starts there is a note: "3 processor system, multiprocessor kernel". When I run the Action Center in reliability monitor there is a note: "DefaultTabSearch.exe stop working. And when I check in the user account, in the tab - configure advanced user profile properties, there are 3 users: '1 default pofile (1.63 MB)' - "2nd computername\NameFileFolder (20.6 GB)" and "3rd computer name\updatus (58, 2MB)» Please give solutuion for this problem.

  I tried to restart and press F8 and already choose all the list of options, and the result is noting changed.

  Hello

  1 did you change on your computer before this problem?

  2 have you tried to run the Startup Repair tool? If so, what was the result? For more information, refer to this link: Startup Repair: frequently asked questions

  As you're able to boot in safe mode, you can restore the system back to its previous state when it was working fine:

  a. click Start, type system restore in the Search box and then in the list click on the system restore program.

  Note: If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click choose a different restore pointand then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  
  Reference: System Restore: frequently asked questions

  Hope the information is useful.

• HP MINI with internal webcam worked until I installed windows 7, where the webcam option?

  HP MINI with internal webcam worked until I installed windows 7, where the webcam option?

  If the webcam is buit in and then, you need to review the HP support pages to see if you need to udate win7 drivers specific or included apps (web cam)

  Of course its possible allways your HP does not support win7

• Acer 1810TZ webcam works only after the new installation of Windows 7

  My hard drive died so I don't have access to the recovery partition. I did a fresh install of Windows 7 on a new drive.  Everything works except the webcam.  Windows has recognized and installed the drivers (and works) but nothing can connect to it.  It was working before the accident (also W7).

  The Acer website says it is made by Chicony (is ID 0 c 45 6310 suggests Sonix) so I downloaded and installed the drivers installed and appropriate Acer Crystal Eye, but it crashes at startup without error message.  Skype and other applications cannot connect to the camera webcam.  I also tried all the other drivers on the Acer website, just in case.

  Comparability Windows Center suggests that the pilot was developed by Suyin that might be the problem.  I found some Sonix drivers that will install on the Microsoft ones but make no difference.  I tried to install and Crystal Eye running in compatibility mode.

  Any ideas how to solve this problem?  I am now at a total loss.

  Help much appreciated. Thank you.

  Hi Shalini

  Thanks for getting back to me.

  I am running 64 bit.

  Yes, the webcam is detected under as WebCam imaging devices.

  Drivers been uninstalled (reboot) and re-installed (reboot)

  Webcam programs have been removed (CrystalEye & Skype)

  I downloaded for a Chicony (WebCam_Chicony (AP) _1.1.95.71_Win7x86x64) drivers as Acer judged my Chicony camera Suyin not

  I heard support from Acer, who say that the problem is caused by a difference between OEM and sales at retail of Windows 7 and I need to re - install Windows from the recovery DVD.  I prefer not to do that.

  Thank you

  Nick

• Integrated webcam works only with Windows 8 Pro 64 Bit XPS 15 L502x

  I have a Dell XPS 15 that I bought in June of 2012.  the machine came with Windows 7 Home Premium 64 Bit and I bought it shortly after the windows $ 15 8 upgrade promotion started.  I got my download of Windows 8 and visit the support site, I noticed that on the date on which Windows 8 was officially released Ell packed in liaison with the drivers for sound, video, chipset, networking devices and so forth but Windows 8 seems not to want to play nice with the built-in Webcam.  Try using the app Windows 8 camera, Skype or anything that has the ability to use the webcam product a "There is a problem with the camera" or preview of the webcam screen will remain black also.  Even if I know that Logitech and other vendors have webcams that are ready for Windows 8, but I don't want to spend money I don't have to.  I went on the site of Dell download software that allows you to download the software that came with your computer to the factory and when I try to download both versions of the Dell Webcam software or one will download despite it telling me that I have at least two download attempts that are available.  I'm starting to wonder if this model is no longer supported.

  Hi gbcmedia2012,

  Welcome to the community,

  After the upgrade to Windows 8 its recommended to uninstall and reinstall Dell Webcam Central Application.

  Check if Dell Webcam Central is still installed on your system (Control Panel, programs and features). If so, uninstall it, restart your system and then try to download and reinstall from my Dell Downloads (MDD)

  If you are not able to redownload it from MDD, try this link below to download and reinstall:

  www.dell.com/.../DriverDetails

  Hope this helps,

  Thank you

• How to disable the touchpad on Satellite L300-19F with Windows XP Home edition?

  Toshiba Satellite L300-19F, who was with windows Vista
  I installed windows XP and everything works fine.

  Since I'm on USB mouse to run I want to disable the Touchpad, but when I press Fn + disable key for touch pad it does not work.

  Need help.
  One can tell me what the problem is?

  Hello.

  To disable the mouse pad, you can go to control panel-> mouse control and disable the mouse pad, or you can use FN + F9.

  Kind regards.

• Windows 7 works only with canon MX 340

  Canon MX 340 printer works only with windows 7.

  Canon MX 340 printer works only with windows 7.

  You mean the Canon PIXMA MX340?

  You have the following drivers installed? :
  http://www.USA.Canon.com/nw3s/CanonUSA/DownloadContents/English/0100461601EN.htm
  (As of 10/23/12)

• Satellite P300 - 19F DVD does not work

  I have a Satellite P300-19F with Win Vista 32 bit Home Premium SP2.
  I can't read any DVD. It does not show a corresponding drive letter.
  If I go on under control panel Device Manager - system, it recognizes a Pioneer DVD - RW DVRTD08A, but has a warning sign on this subject. It is said that the configuration is corrupted.
  I've uninstalled and reinstalled without success.
  I downloaded the drivers from Toshiba and not to be resolved.
  What can I do to solve the problem?

  Thank you.

  Maybe this can help - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

• Impossible to get updates of Windows to work and cannot install anything after upgrading to SP3

  After the upgrade to SP3 I met many problems. Any time I go to install it I get a Windows Installer error is not installed (even if this is the case) and I have to go to start/run and type Services.msc and the go to the installer of windows and right-click on it and select start and then install what I was tring to do.  Windows Update will not update and I tried to restart the installer and it does not work.  I tried the auto fixes but cannot get them to work because they will not install either or will not run.  I had to uninstall Windows Defender as I am unable to update the definitions it is basically useless.  All this started after I did a full cleaning of the computer and then downloaded the original Windows XP that I bought from Dell.

  Try this:

  http://www.ehow.com/how_7176381_microsoft-install-after-installing-SP3.html

  I hope this helps.

• Satellite L650 - recommendation of the OS and can not install drivers

  HY,

  a deploy a satellite L650 - 18 X and I tried to install windows 7 seveeral times... (x 64 editions) without success, I managed to install an edition clean windows 64, works fine but I have a problem, cannot install the drivers for the keys fn; coomon installation module tracks ask for a reboot but after reboot when I want to install other drivers for the "common module not found" displayed error fn keys...

  I want to know what operating sistem u would recomand me and so is windows 7 How do I find sata driver, o I already serch the forum how to do this on the l series, but could find nothing

  Hello

  > I tried to install windows 7 seveeral times... (x 64 editions) without success, I managed to install an edition clean windows 64
  Where is the difference between Windows 7 64-bit and Windows 64 edition? In my opinion it of the same

  In any case, best recommendation of OS is version preinstalled Windows in my opinion, because he configured Toshiba s with all the drivers and tools you need. No additional installation is necessary and your laptop is ready for use.

  Generally for the FN keys you need Toshiba value added from Toshiba Web site package.

• How to fix Windows update configured to never install drivers

  None of my USB sticks work, says no driver installed.  Troubleshooting report says "windows update configured in a way to never install drivers". How can I fix?

  Hi Phil,

  Thank you for your update on the issue.

  1. Have you tried to connect your USB stick with all the USB ports on your system?
  2. You are able to install all Windows updates.

  As you have tried to choose the option always to install the best driver from Windows Update software already, I suggest once, click the radio button for Yes, this automatically (recommended), save changes and check if the problem persists.

  Also, I suggest you try to remove and reinstall all USB controllers and check with the question.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  More information: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Please post back your results for assistance.

• Satellite of strange behavior of C670-19F - 10 Windows - keyboard

  Now that I've upgraded to Windows 10. Everything seems to work ok except the strange behaviour of my keyboard.

  When the Fn key is NOT pressed:

  (1) the keys 1, 2 do not work
  (2) the keys 3, 4 volume control
  (3) key space works do not at all
  (4) function keys behave normally (F1, F2, etc.)

  When the Fn key is pressed:

  (1) the 1,2,3,4 keys work like nymbers
  (2) space bar works like the space
  (3) function keys do nothing

  I tried to uninstall everything associated with toshiba but also by pressing Fn for 10 seconds, Ctrl + Fn, Fn-stop scroll and any other combination I could think of.

  In the BIOS there is no option to disable the function keys.
  In the HWSETUP, there is no option as well

  I'd appreciate any suggestions really. Thanks for your time.

  Same problem with C670-15 q. appreciated solution

• Satellite A215-S7444 integrated webcam works only with MSN / Skype

  Hi, I just bought my laptop computer and just after installing the new MSN and Skype, the video does not work with these programs. I tried to configure the video settings in MSN and he told me that "windows cannot connect to this webcam. It is currently in use or not plugged in." The webcam is integrated, a Chicony USB 2.0.

  Any tips?

  Hello

  I found your webcam question and I think I have a solution.
  In this thread, the user beret83 has posted a useful info:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26332

  It s interesting to know if it will solve your problem of webcam.

• Webcam works only with Windows 7 after the computer has been cleaned.

  original title: Webcams

  I had to get my computer cleaned. After it was cleaned the windows installed person 7. I used Vista. I have a webcam built into my computer. I used to be able to use it to take photos and videos. Now, I can't. When I search for the webcam all I can find general information about it and its properties. Anyone know how I can get my webcam back up the way I used too?

  Hello

  Each manufacturer of system or camera maker provides their own software to control the camera so
  You should check with their support, their books online and ask in their forums (if any).

  You probably need to recharge the device drivers and camera control software (usually included
  with the drivers and installed at the same time).

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

• Satellite A300-1J1 - sound doesn't work only with Windows XP

  I have a problem, yesterday I installed on my Toshiba Satellite A300 1J1 WindowXP, but no sound!

  I tried all sound driver Toshiba on the Toshiba web site but no result!
  Some can help us?

  Hello

  Your laptop is a Realtek audio chip. If you install a Microsoft hotfix before installing the drivers.

  Check out these links:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  Welcome them