Satellite C70 - A - 15 d - Touchpad no longer works

Similar Questions

• Re: Satellite C70 - B - 21 c - touchpad does not work

  Hello

  Last week, I received my new Toshiba C70 - B - 21 c. After the updates of windows, the touchpad no longer works. My mouse doesn't. I tried the FN + F5 and FN F9 options, but no result. Also download the driver from the toshiba website has no effect.

  Several reboots and also remove the touchpad system settings do not help. The touchpad works in the first screen, but after entering my username and password, it stucks.

  What to do now?

  Concerning

  Niek

  Have you tried to roll back the Windows restore to an earlier time using System tool?
  Test it. Choose the last known point before the Windows Update has been installed.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Satellite A350-212 - touchpad no longer works

  Hi all, I have some problems with my FN keys, my touchpad no longer works, in addition to this, when I press the FN key, I don't see any icon on the top of the screen... Two days ago, all this did not work properly... An error is given by the program called Tossiba assist, its written exactly this way: this system cannot use accessibility... Could you please help on this issue?
  My operating system is Windows vista 32-bit (service pack 1)

  Finally, sorry for my English if I make mistakes, it is not my mother tongue...

  Thanks in advance

  Try to restart flash cards.
  Start > all programs > Toshiba > utilities > restart Flash Cards

  After doing this press FN button several times to see if Flash Cards are still on the top of the screen.
  If you see Flash cards again use the FN + F9 key combination to activate the touch pad again.

• Satellite L50 - B - 24 c - touchpad does not work

  Hello

  I apologize for my bad English, however, a few months ago, I bought a laptop Toshiba (L50 - B - 24 c) and after a few weeks, the touchpad no longer works. I have before, I had connected a mouse for your comfort for some programs.

  Now when I disconnect the mouse pointer disappears from the screen.

  Thanks in advance for your answers.

  Hello

  I guess that your laptop supports ELAN touchpad driver.
  I read in another thread that in the past, an update of the ELAN touchpad driver has caused a few problems and the touchpad is not working properly...

  That's why I recommend you to uninstall the driver for the touchpad MOMENTUM of the system.
  After that, restart the laptop and check if the touchpad would work again...

  In case the touch pad work, download the driver of the ELAN touchpad from the page of the Toshiba driver and install again.

• Split 13 x 2 touchpad no longer works

  I have a new split of HP 13 x 2. The touchpad no longer works. This is the latest driver Synaptics Touchpad (17.0.10.9). I'm under WIN 8.1. I have to close the session and then again for the touchpad to start working again. Any suggestions?

  Took a little digging on the forum but found this solution that worked for me in solving the touchpad freeze problem:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/split-X2-touchpad-problem/m-p/3361845#M48265

  Hope this works for you.

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• Satellite C55 - Touchpad no longer works

  Hello

  The touchpad on my C55 no longer works.

  After you restart the touchpad works until I signon to Windows. After this, all functions will stop.

  A few days ago, I think that some Windows updates have been launched.

  Is that what someone else has had this problem and can you give me a solution please?

  In addition, immediately after the entrance to Windows, it works always, but after a while, he stops. This rings a Bell?

  The driver for the touchpad seems to be ok.

• Satellite U400 - 10L - touchpad no longer works

  Suddenly, my touchpad doesn't work.
  Any suggestions that might help with this problem?
  My laptop is Satellite U400 - 10L

  Hello

  I think that you should first check if the touchpad is not disabled.
  Check the FN + F9 key combination.

  If the touchpad still does not work, try reinstalling the driver for the touchpad.

  Welcome them

• My Satellite Pro A200 (PSAE7E) touchpad no longer works

  Dear Sir.

  My problem is my touchpad does not work, I usually enable it or disable it in a tab to hide automatic at the top of my desk (which was disappeared after I updated to Vista SP1), after that and accidentally stopped the pointing device driver,

  I tried to re - install again but I could not find out who the good driver for my laptop is (ALPS Synaptics pointing device or pointing device)?

  I tried to press FN + F9 key but I had no change that the touchpad is not working, so I have to use a USB mouse...

  Can you help me please

  Note that I'm using Windows Vista Business SP1, Toshiba Satellite Pro A200 (PSAE7E)

  Thank you very much

  Zaid

  Have you checked the Device Manager? Normally, you should see what touchpad you have exactly.
  So the latest driver, you can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online support & downloads-download drivers online

  Check it!

• Satellite M70 PSM73C - touchpad no longer works

  For some reason any my touchpad isn't working.

  After trying unsuccessfully to get it working again, I found the software installation driver (tpdrv-xp - 603056.zip) on the Toshiba site.
  I thought I would uninstall and reinstall to fix the problem, but when I try to start the installation I get the cryptic error messages.

  The shield of the installation does not work yet.

  Anyone who has had success or knows how to get this software to install the touchpad?

  Thank you.

  What error message you get exactly?

  To reinstall or update the driver for the touchpad, you should delete the old first in Add/Remove Programs, restart your computer and install the new version from the Toshiba site.

  Check this box and post your result.

• Satellite L305-S5921 - Touchpad no longer works

  Thanks in advance for any help.

  I had my laptop for about a month now, and about a week in I plugged a USB external mouse because I prefer it on the touchpad. One day I decide to unplug the external mouse and use the touchpad for a bit, but when I unplugged and allowed to the touchpad, touchpad does not work.

  I tried the FN + F9 key combination several times but it does not work and I have also reinstalled the drivers for the touchpad repeatedly and they have not worked either. I also uninstalled the touchpad drivers and rebooted the computer, leave the computer to deal with reinstalling the drivers, but the result was the same.

  Someone at - it other ideas or do I have to send my laptop in for repair?

  Hello

  Did you install additional software for external mouse?

• Satellite Pro L450D - 12 X - pad touchpad no longer works

  My daughter used the laptop earlier, when suddenly the mouse pads and buttons right and left click stopped working.

  I tried to restart and even restore to an earlier time, but nothing he will work again.

  Any ideas what this could be and how it can be sorted?

  Thank you.

  Hello

  Have you checked if the touchpad has not been disabled by mistake using the FN + F9 keys?
  Please check this box.

  In most cases, this tiny option would be to neglect and in most cases, this is the reason why the touchpad does not work.

• Satellite X 200-219 - the touchpad does not work as it should

  Hi all

  I recently bought a 2nd hand Toshiba Satellite x 200-219. Had some problems with it that I have overcome now, except one... The touchpad does not work as it should. I think that the cable has been damaged at some point.

  So I'm wondering if I should use the same ribbon cable to connect the keyboard to the motherboard or can I get one of a different model of PC Toshiba laptop?

  I tried searching on the net for advice but have resulted in nothing so thought I would try the forums.

  Any help you can give will be greatly appreciated.

  Thanks in advance,

  Lee

  I think you can use the items to the satellite X 205 series since this seems to be the same series as X 200:
  Found some related parts the touchpad:
  Satellite X 205 / X 200 touchpad Board with cable: reference number: K000047950
  Satellite part number for the TOUCH PAD FFC X 205 / X 200: K000047980

  But why you n t come into contact with a Toshiba authorized service provider in your country and order the part necessary and compatible?

• Satellite Pro C50-A-153 - Touchpad does not work properly

  First, sorry for my bad English.

  I have a Toshiba Satellite Pro C50-A-153, the problem is its touchpad and not work correctly, the mouse does not move when I move the finger on the pad, it seems that if I had to roll the bar "or the mouse wheel.

  Sometimes, the 'mouse' works for 20 seconds and then again the same thing. An external mouse works fine.

  It is not the problem of the functions "Fn". I tried to stop, reset the battery and press the power button to 50seconds. I also tried to uninstall the drivers for the Touchpad, and I think that I tried to change all the properties on the 'Control Panel - mouse'.

  Can someone help me with this?

  Thank you.

  On most computers laptop Toshiba is installed the Synaptics touchpad driver. With this driver, there are available additional touchpad settings. Try it please change these settings and turn off the features you don't need.

  How to do that you can read on https://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

  Check it out.