Satellite C850 - Touchpad stopped working

Similar Questions

• Satellite U400: touchpad stopped working after Vista update

  Hello

  My Touchpad U400 cannot work after the upgrade, (under the Vsita system).
  I tried so many ways to solve, but still does not
  Did someone get hurt it?

  I tried to get into the BIOS to enable
  And also tried to download my touchpad driver (but I can find it)
  BTW, Fn + F9 does not work as well

  Please help me solve this problem

  Thank you very much

  > And also tried to download my touchpad driver (but I can find it)

  The touchpad driver is placed on the page of the European driver Toshiba
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Here, one must choose the right laptop model (see the bottom of the unit model number)
  Then choose the operating system and the touchpad driver should appear.

  PS: there are two touchpad drivers listed on the page; Synaptics and Alps Electric
  Both must be installed!

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Satellite L500D PSLT6A - FN keys and touchpad stopped working

  I have a Satellite L500D, model PSLT6A-015003, windows 7 (32 bit) notebook and the keys FN and the touchpad stopped working.

  I downloaded from download of Toshiba, the touch pad and the FN key downloads page, but nothing works.

  Can someone tell me please how to get this working again, even if it's only the touchpad.

  Flash cards are controlled by the utility of Flash cards and this utility is part of the Toshiba value added package. If this package is installed on your machine it remove the system, restart your computer and install the latest version of the Toshiba download page.

  Please also follow option:
  Open the settings of flash cards and set the option to allow the mouse to make the maps and test if it works.

  Please check the touch pad properties. Check if the touchpad is properly listed and enabled in the device (mouse and other pointing devices) Manager.

  Second thing you must check is the control panel > mouse > device (last tab) settings. Make sure that the Synaptics touchpad is listed here and it is not disabled.
  As last step make sure touchpad is not disabled with the combination of FN keys (if possible).

• Re: Touchpad stopped working on my Satellite L350-171

  Are my touchpad stopped working and the 2 buttons below. I have been using only a usb mouse, but I want to free up space, are there solutions please.

  Please check first if the touchpad is enabled or disabled.
  Use the FN + F9 key combination and don't forget the touchpad is enabled.

  Also check the Device Manager and the entry for the mouse and other pointing devices. Touchpad is listed here?

• Satellite L500: touchpad stoped working

  Hello

  I have a Toshiba Satellite L500 laptop and all of a sudden my touchpad stop working.
  I tried to check the mouse options in Control Panel, but I find it still in there.

  No idea how fix it.
  What should I bring to a service center?

  Thank you

  Hello

  First of all; Please check if the touchpad has not been accidentally disabled.
  Check the FN + F9. This function activates and disables the touchpad.

  In addition, you can go to control panel-> mouse-> device settings
  Here, you should also check if the touchpad is enabled or disabled.

  Finally and above all an update of the driver touch pad or relocation could help

• My cursor Touchpad stop working.

  I have Toshiba laptop, Satellite C-650-01W.  Cursor Touchpad stop working. How to get back to work?

  Hello

  Thanks for the reply.

  Glad to know that the problem has been resolved. If you have additional questions about Windows, please post your questions in this forum.

• Satellite A120 - display stops working properly.

  Hello

  I am trying badly to turn this problem on my own before taking my laptop to a retailer for service.
  My Satellite A120 screen stopped working properly. Can I use it with an external LCD or VGA monitor and it works fine.

  It appears on his own > only< when="" it="" is="" set="" to="" 'safe="" mode'="" with="" or="" without="" networking.="" but="" when="" toggling="" in="" conjunction="" with="" the="" fn/f-5="" keys="" in="" normal="" mode="" the="" laptop="" display="" fades="" to="" gray="" or="" black="" every="">

  Is it a problem of laptop computer profile, a hardware problem or a problem with the BIOS of the laptop?

  * This laptop has never been joined to a network environment. Only been used by one person for use at home or school.

  Thanks in advance for your suggestions!

  It's strange, but you should try to reinstall the laptop with the Toshiba recovery disc.

  Maybe you should first check the Toshiba website for a new driver and BIOS:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

• Satellite A60 - sound stopped working

  Satellite A60 - sound stopped working. Download driver toshiba web site - click on the sound icon's new sound update and it worked, but disappeared whenever I restarted.

  Clicked the icon of installshield and starts to install, but then an error message saying 0 x 80040303, unknown error, the Setup program ends - this happens every time.

  Tried to download any other updates, but he says that I register my cell phone, I'm sure I did and doesn't let me do once again because it is more than 6 months.

  Help!

  Hello

  Try to restore the operating system to an earlier time when everything works well. On this path, it is not easy to say why this is happening. Try also to remove sound card since the Device Manager, and then restart the device.

  All the drivers for your device, you can find on Toshiba download page under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Compatible Snaptics Ps/2 Port touchpad stop working, gives error Code 24

  Last Thursday my Snaptics Ps/2 Port Compatible TouchPad stop working. Code 24 arrives. What is the 24 code and how can I solve this problem?

  Hi linda3398,

  Please see the following about the Code 24:

  Code 24

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  Cause

  The unit is installed incorrectly. The problem may be a hardware failure or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  You may need to update your drivers for the touchpad.

  I hope this helps!

• My touchpad stop working, how re - activate it?

  I had it hooked up to a TV to live stream on the TV screen, in the process of my touchpad stop working and I had to use the mouse to another system.

  Hi Jvergith,
   
  1. have you tried to update your touchpad drivers to see if that fixes the problem?
  2. What is the brand and model of your laptop?

  Remove the touchpad drivers in Device Manager and reinstall.

  To reinstall the drivers for the touchpad by uninstalling current drivers
   
  Sometimes, there may be driver errors that prevent the touchpad from working.
   
  a. Click Start; on the start menu, search type devmgmt.msc and press ENTER.
  b. If you receive a quick click, consent to continue.
  c. expand mice and other pointing devices.
  d. right-click on the component of touchpad and click on uninstall.
  e. once the uninstall is complete, restart the computer.
  f. download the latest drivers for the touchpad of your computer manufacturer website and install it.
   
  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• My touchpad stop working suddenly... .Please help me

  I have laptop HP 530. All of a sudden my touchpad stop working when I press on double-click.

  but I'm stil can move the pointer of the mouse over it.

  I don't really know what is the cause of this problem, I need someone to help me please.

  Osama.

  My touchpad back to life finally , I am so happy happy

  After 8 months suddenly and luckily it worked again

  It's a problem with the hardware, by chance, I pressed the left button of the penalty and I have the answer to the pressure

  Thanks to God,

  Thank you anyone help me

  

• Touchpad stopped working on my new C850 Satellite

  I have new Toshiba Satellite C850-B293 after a day can touch pad didn't work.
  Can someone help me? I already check the setting and I put in default, but still changes now.

  Please help me...

  On this virtual path, it is not easy help. We don t know what the problem is here.
  Please be sure to touchpad is successfully activated. Use the FN + F9 key combination and don't forget the touchpad is successfully activated.
  > I already check the setting and I put in default
  I don t know what do you mean with by default but if possible to reinstall OS again and test the touchpad with preinstalled OS own feature and factory settings.

  How to do that you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

• Satellite M50A - ELAN touchpad stopped working - again!

  Do not forget this recent thread?

  https://Forum.Toshiba.EU/showthread...topped-working

  Well guess what that my mouse and touch pad stopped working again today, this time during a Windows Update (and not after) - and guess what... the 'momentum - other hardware - MOMENTUM Input Device"was one of the updates, as well as the last time.

  The good news, for me, anyway, is that this time the problem was temporary. After forcing a restart by a long press on the power button, mouse and touchpad has been restored after finishing installing updates.

  EDIT - just to say that my touchpad customizations for example reverse scroll direction, 3 finger tap to start the browser etc were all lost. Not much, just a nuisance

  And as a follow-up, after you change the registry to restore the functionality to launch my favorite browser with a finger 3 press on (see another thread for reason of why I had to use regedit) I've had intermittent results.

  Now, I realized that the 3 finger 'press' feature seems to have disappeared to be replaced by a '3 fingers' touch. It is not documented that I can see, the registry key names remained the same, but pressing done nothing at all works a 3 persistent finger touch.

• Satellite P300 - 18 M Touchpad stopped working

  My P300 works wonderfully, but suddenly the touchpad has completely stopped working - including the buttons left and right. I can't find the touchpad in Device Manager, and it is at the limit of my (in) skills!

  Where should I look? Any help would be much appreciated! Thank you.

  Michael

  Very strange problem! Please open Control Panel > mouse properties > Hardware tab is listed Synaptics PS/2 Port TouchPad?

  Have you tried to roll back the BONES to the bygone era? Please try it out.