Satellite U400: touchpad stopped working after Vista update

Similar Questions

• Satellite L350 - pad stopped working after BIOS update

  Hello

  The digital pad stop working after upgrading the bios on a Satellite L350-170 (1.90-online 2.20).

  Any ideas?

  Concerning

  The value of the default BIOS and test it again.
  NUMLOCK button works (LED on / off)?

• Satellite A105 shift stop working after BIOS update

  I have a stack of boards of laptop of the A105 (Intel chipset) series that I received with the wrong BIOS. Both worked, and I updated the BIOS on them to solve CPU compatibility issues. After that, the shift keys stopped working and pressing Shift-A causes the power led to decrease in intensity. Return to ANY BIOS version, either by the Windows, CD or floppy disk of crisis recovery program (magic key is 'F', not 'B', 'Esc' or 'U'), does not solve the problem of the keyboard.

  To make things more confusing, I've noticed that single BIOS one that actually seems to correct the problem is version 1.50, which I have not seen available for any Tecra A7 or Satellite A100/A105, with the exception of a few 100, but the BIOS file is too small and cannot be loaded.

  Anyone has an idea why these cards Intel processor do that? Or did someone knows where I can get a usable version of BIOS 1.50?

  In the interest of this post, please consider my high level of competence. (In other words, I would be grateful for the people trying to help 'Replace the keyboard', but I have about a dozen keyboards, that everything I tried, and all work on other laptops. In addition, if you have just a theoretical solution, I'm certainly open to hearing. In addition, if a Toshiba tech would answer, I really appreciate it!)

  An update, it seems that the laptop from a different manufacture series show almost the same problem. There are certainly similarities of BIOS, since these Toshiba use the magic key to Fujitsu to trigger the block to start recovery from the crisis. I guess it's very likely that this problem is specifically a problem of Phoenix BIOS.

• Acer ES1 - 511 Touchpad stopped working after the update to the latest version of windows.

  I just updated my Acer laptop ES1-511 (8.1 Win x 64) and my touchpad no longer works after a reboot.

  I went on the site driver of Acer and reloaded the driver Elantech, restarted and the same problem.

  I have went on the site Acer driver and reloaded the e/s Intel driver chipset, rebooted and reloaded the driver Elantech.

  Always without success.

  Help. Laptop is limited without touchpad utility.

  Go to the download site Acer for ES1-511 and get Intel i/o Drivers and reinstall it.
  us.Acer.com/ac/en/US/content/drivers/5345;-; Aspire 20ES1-511%
  Be sure to select Win8.1 64-bit as OS.

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• laptop keyboard stopped working after Windows update.

  have a toshiba satellite A505 laptop and the keyboard stops working after Windows Update reboots. We reinstalled Windows 7, which fixed the problem until the updates have come. Now the keyboard is unresponsive. Sounds like a software problem, no material. Also checked the keyboard drivers that are up to date.

  As a first response, go to the control panel, device, keyboard, keyboard Manager and right click, uninstall it and let it rediscover Windows and then reinstall it.

  It suits it much of the time.

• My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5

  My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5, but my InDesign and Photoshop work very well. How can I get Illustrator to start working again?

  NOTE: I read a previous thread on the opening of the Java Control Panel in the system preferences (because I installed the new java my computer asked me for marketing immediately after in the new yosemite), but there is no icon Java not found. I installed this new java download more than once and still can not find it. Help!

  olou,

  If the suggestion on possible recording by Larry fails, see this page

  https://www.Adobe.com/account/my-products-services.html

  I'll try to ask a personal forum friend who knows what to do.

  For download, read this

  http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  and update, see

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh

• Capacity wireless suddenly stopped working after an update of Windows Vista.

  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, but stays yellow that messeges troubleshooting all say computer does not detect wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F700 laptop.  All the options out there?  Thank you

  original title: can't find the wireless device

  Hello again, Kathy,

  More specific instruction, I can give to check settings in the BIOS of your system is to search for a list of devices that installed your laptop. There are only two options for each device, activate them and deactivate them.
  Look for something listed as network radio or wireless card and make sure that it is set to enable.
  The option that you network adapter found can also control the wireless adapter, but it can control only the plug adapter (Ethernet) network.
  A simpler solution, if you have not already tried it it is the system restore in Windows as mentioned by Kiran in a previous answer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  WARNING: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk.

• ScrollBar NB100 touchpad stops working after exit full-screen mode youtube

  I have some Toshiba laptops, satellite and now netbook100.

  All share a problem, the touchpad scroll bar:
  It stops working after you exit the full screen in youtube.
  Here's how to reproduce the incident:

  1. with the help of any mainstream browser, start playing a video on youtube, click on the button at the bottom right of the video full screen.
  2. click on [the cross] to exit full-screen. (next to button full screen.)
  3. check if you bar scroll that still work.
  4. a reboot will restore function.

  Currently I m on vista, I think that you will have the same problem under XP.
  The search in google (scroll touchpad bar stops full screen youtube) return more people will share the same question but no answer.

  Environments: win xp all, win vista all.
  All decks, Windows Update driver, updated touchpad driver.

  This is not a major technical problem, but for a netbook, it's very annoying.
  If anyone has this problem or answers, please share it here.

  Thank you in advance.
  Kind regards.

  To be honest, it's the first time I read on this issue.
  I m not a NB100 owner but I have a laptop and I m using IE as your browser and Windows XP.
  I checked this and my touchpad is not working correctly!

  I m wondering if this behavior would appear only the website youtube?  :|

• Portege Z10t-a - intermittiently touchpad stops working after mode 'sleep'

  Hello

  I have a protected Z10A and the touchpad and keyboard intermittiently stops working after the mode 'sleep'. I can't wake up, or restart without re-booting.

  I did the update to the keyboard firmware docker as advised in a thread on January 2014, but this did not help the problem.
  This computer is 2 weeks.

  I was download site and updated all the drivers and updates.
  The computer works perfectly except for this problem.

  When the Tablet is in standby, the white led flashes, and it is when everything works fine, but if the light for some reason any does not Flash but still turned on, then it will not start and I have to restart the tablet.

  I have disabled hibernation in the options mode, but still no help.

  Any help would be appreciated.
  Thank you
  mm

  Hello

  I m wondering if the option (in BIOS) called Wake-Up on the keyboard is turned on.
  To restore the functioning of the computer from sleep mode, press the power button or any key on the dock of the keyboard for a short period of time. But the keys on the keyboard can be used if the option is enabled.

  Note: when the laptop is in Sleep Mode, the power indicator of will blink white. If the light flashes white, the computer laptop isn t set mode sleep!

• Canvio Basic 2 TB suddenly stopped working after Xbox update?

  While to say that the title of the hard drive has stopped working once an update has taken place on the Xbox one a few days ago.

  Now I tried it on a different Xbox one (didn't read), and also tried on a computer laptop windows 10 has yet no chance, at first he tried to install it but only got up then stopped, but even after having passed, still nothing, now its there if I go to device management (depending on whether its fine) but I can not even open the hard drive itself.

  I've had it for about 6 months maybe a little more, but still is it safe, placed just behind the xbox connected, never needed to move it.

  I hope someone can help or suggest something, but im now puzzled.

  Thanks in advance.

  I have the exact same problem mate

• Satellite A200 - Touchpad scroll function stop working after BIOS update

  Hello

  After that I updated the BIOS (drawn from the Toshiba site), the scroll function stop working. I can still click, move the mouse pointer, but can no longer navigate the touchpad. Relocation of Synaptics driver is not the problem. The strange thing is that the computer detects only my touchpad as standard pointing device (port: PS/2) device. "Graph of pressure" and "Moodpad" function also stop working and complain "this program requires a Synaptics TouchPad, and the Synaptics Pointing device driver.
  My computer is Satellite A200 PSAE0C-TR605C.

  Anyone know the reason?
  Thank you

  Danny

  Hello

  What operating system is installled and which is more interesting: what version of BIOS you have installed? Why I ask? Because there are 2 different BIOS versions, one for Vista (1.80) and one for XP (5.20) which means that when you Flash a BIOS XP on a computer with Vista installed then some functions do not work properly as the FN keys or the touchpad.

  If please check this out and make sure you have the appropriate BIOS installed.

  Welcome them

• Satellite P200 PSPB6: Collapsed control buttons working after Vista update

  I have the Satellite P-200 model PSPB6 with Vista Home Premium for more than 1 year.
  So far, there is no problem of material with him.

  Although there are software problems, the most important of which is that the laptop sometimes fails to wake from Hibernate mode and the continuation of this failure. I need to reinstall the driver LAN at any time.

  But a few days ago after a massive Vista (approximately 40 patches at the same time) update all the hardware buttons (for internet, Media Player, etc.) suddenly stopped working.
  In fact, the only button I used actively was button, launch Internet Explorer, whereas, instead of opening the media player and by launching a media file in the menu much more ergonomic correspondent is just double click on the name of the file in a like Total Commander file manager.

  Well, my first thought was that the drivers for these buttons have been destroyed following this update messy (I managed to install all updates,
  except for Office 2003, after 5 attempts only partially successful, in the 6th!).
  There is no sign of incorrect or missing drivers in Device Manager.

  I've located the corresponding devices in the Device Manager under system devices---> button to launch the direct Application.
  There are 3 devices with that name in Device Manager (although my laptop has 6 buttons). All of them are declared as "working properly", although none of the 6 buttons actually work.

  The second idea was to use the tools of Toshiba. I found that there is a "Toshiba button Support" field in Toshiba Assist--> optimization, which opens a window
  which I guessed (there is no description of the functions of this window or even simple mentioning of it in the user's guide) is used to reassign functions of the any of the buttons to launch applications defined by the user instead of browser by default, Media Player, etc..
  But the strange thing is that there are only 2 fields instead of 6 in the drop-down list of the button names: 'Internet' and ' CD/DVD.

  Well, I wrote 'C:\Program may Explorer\iexplore.exe' as the target path for the 'Internet' button and saved the button.
  The button did not work so far :(

  The third thing I did: I reinstalled the package with added value for the model 6 buttons. Without success :(((

  If anyone knows how we can restore the function of the buttons - please help me.

  And if someone can explain why the app for the model 6 button ignores these buttons 4
  (and why the devices for 3 buttons appear in the Device Manager)-
  This information would be useful as well.

  Post edited by: Vlad0

  Sorry! (P. 4-14 of the operating manual), I found the info on how to change the functions of the top 2 buttons - and it seems that the functions of
  Only these 2 buttons are configurable, 4 others are fixed. And these fixed buttons actually work if Windows media player is launched.
  So my question boils down to this: How can restore the function of the first two buttons (definable by the user)?

  Hi, I read your post because I have the sam problem.
  I have a new P300d - good machine - showing a lot of problems, although
  So I installed vista business in v2.1 bios and the buttons works great.
  After the updates, then the functions keys were different, so I downloaded and installed the package of value added. The only difference was that collapsed buttons not all working.
  So I uninstalled the VAP and they worked as at the start.
  Something else - find the ButtonSetting.ini file and try to change the functions of the keys here.
  So I hope that it can give you another idea and help you in any way.

• Microsoft Word no longer works after Vista update

  Hello

  MS Word has stopped working immediately after Windows Vista updates automatic.

  When I try to run Word, it opens, but I can't perform tasks of hormaux in the document and when I try to close (or save) I get the message "Microsoft Word has stopped working".  The system diagnostics are unable to solve the problem.

  I have a Dell Inspiron 1525. 32-bit operating system.   Windows Vista Edition Home Premium.

  Thank you
  Dora

  Hi Aldous and others

  I have the same problem and resolved to mark a change in the registry as indicated in this article, http://support.microsoft.com/kb/921541/en-us

  I restart and open and reopen and it works fine so far.

  Hope it help you too.

  Best chance

  Kenneth

  Sorry for the bad spelling :-(

• Some keys stop working after the update of the Sierra (only for a specific profile)

  After update to Sierra my keyboard worked well for a while.  But at random, U I O P J K L keys stopped working.

  The bug only shows 1 profile. If I create another profile new profile keyboard works very well.

  Anyone know what that sometimes caused that and with the fix is?

  Hello ExcelsiorPath,

  After reviewing your post, it seems that several keys do not work on a single profile. This looks like an option that may have been changed.  I recommend you to read this article, it may be able to help solve the problem.
  
  

  If the other keys do not work

  You may have accidentally set an option that changes your keyboard works.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click keyboard. Make sure that slow keys is turned off. If slow keys is enabled, you will need to keep a key longer than usually before it is recognized.

  • Choose the Apple menu > System Preferences, click Accessibility, and then click mouse and Trackpad. Make sure that the mouse keys is turned off. If the mouse keys is enabled, pressing the keys in the numeric keypad moves the pointer instead of entering the numbers.

  • Choose the Apple menu > System Preferences, click keyboard, and then click input methods. Select "Show the menu in the menu bar." Open the menu entry, then make sure that the correct keyboard layout is selected.

    To display the keyboard layout, click keyboard, and then choose "See the viewers for emoji keyboard symbols in the menu bar."

  macOS Sierra: If your keyboard does not work

  Thank you for using communities of Apple Support. Good day.