Satellite L500: touchpad stoped working

Similar Questions

• Bluetooth on Satellite L500 does not work!

  Hey well im disappointing defetly of Pentecost suport of toshiba, they never anwser mi email, and when I call for the support that they did not fix the problem mi! After 2 monthas waiting they never remember!

  My Bluetooth on Satellite L500 does not work! I have upgraded from vista to 7 suport said that I probably had to put the Vista pc again to install the bluetooth, and upgrading them to 7. IM whit vista of Pentecost after using the restore cd.

  After that I read some post and install the drives still does not work!

  I try to install bluetooth monitor, then the battery Bt when battery is installing wask me to activate the bluetooth I use Fn + F8 and the battery does not install it!

  Any tips?

  Just do so for sure:
  You have enabled your wireless switch?

• Satellite L500 - touchpad & CD are no longer works

  Dear Sir

  I have laptop Satellite L500. I have problem with the touchpad and the two losses cd-rom functionality.
  Once I click on the touchpad cursor not moving not and he touches also does not work.
  Please give me solution to this subject.

  I have try the installer to load default setting, then also it does not work.
  Please give me solution to this subject.
  Thanking you
  Sandeep.

  Best way to test the functionality is to reinstall the original recovery image and test the material with the settings.
  Please use recovery DVDs discs, if you have created them, or use the option of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

• Satellite L500 webcam stopped working

  Hi guys,.

  I obtained through Satellite L500, webcam quality is very bad, especially @night time. But suddenly it stop working while I was on windowLive messenger with Windows 7.
  I tried a few settings but does not work. It shows the light but in window have only a green landscape.

  Could you please someone help me?

  > obtained by Satellite L500, webcam quality is very bad, especially @night times

  Check this Toshiba document on the quality of the webcam:

  + How to change the settings for the built-in webcam If the image is very dark or black +.
  http://APS2.toshiba-tro.de/KB0/HTD9402LC0000R01.htm

  and this one;

  + Bad image quality when using the internal webcam under dark light conditions +.
  http://APS2.toshiba-tro.de/KB0/TSB8A02G80000R01.htm

  Welcome them

• Z30-B-100 satellite - enabled touchpad not working not

  I just turned on the laptop and that was trying to set up connections wifi touchpad no longer works.

  I tried the Fn + F9 key, but nothing has changed. I turned the laptop off and then on again without any result.

  I can work to plug a usb mouse but the touchpad still does not work.

  You have a solution or should I take to be repaired?

  I bought it a week ago and I just had office and antivirus installed and worked very well so far.

  Thank you

  The touchpad works in the BIOS?

  If this isn't the case, it may be a hardware problem, or it is simply disabled in the BIOS.

• Satellite C850 - Touchpad stopped working

  Hello

  When using the touchpad has decided to stop working completely - the key and the keys. Any ideas how to solve this problem?

  BR
  Juha

  Touchpad works again when you restart your laptop?
  Is there a reaction when you use the FN + F9 key combination?

• Satellite M40: Touchpad not working not properly

  I just had a problem where my dog jumped on my knee and operated something on the keyboard of my satellite M40.

  Now, whenever I try to press the button two times, I get the properties of the icon I'm hovering above. When I try to use the keyboard in Word, I get the menus to open instead of type appearing in the document.

  I can erase it with a restart, but I would like to know what happened.

  Fiona

  Hello

  It seems that the dog has changed the touchpad options ;)
  You should check the device touchpad settings in the mouse properties.
  What you can find in the control panel.
  Select the mouse and then go to the device settings tab. Then go to the synaptics touchpad settings.
  There you should find a few options you should check.

• Satellite L500 is not working correctly even on Safe Mode

  Hello

  I bought a L500 six months ago and now it is almost useless. Trying to operate it by booting normally it is impossible, taking more than 40 minutes just to start. Get any running program or any open window takes several minutes, or not at all.

  I tried to restore the computer to an earlier date, but he goes back to two weeks ago and is still faced with the same problems. I checked for bad sectors and not found. I also tried to do a CHKDSK, but finally, it freezes after a few hours during step 4 of 5, in the following file:
  [Users\DANIEL ~ 1\AppData\Local\MICROS ~ 1\Windows\TEMP OR~1\Content.IE5\FIA7RO0V\combo[1]

  I can use the computer in Mode safe, most of the time, but when moving information it tends to block or slow down a lot. I've been back up my information and as many times it freezes during the process.

  I've been using Microsoft Security Essentials, but it has been disabled. I can t get back, even if I was constantly using USBs change information between computers and no viruses have been detected in the my other computer.

  I remember that one of the things that began to work strangely been WMP, VLC, as well as movies recorded on the disk and a few music albums would start freezing after 5 minutes to be played, and then play again for a while and freezing later again.

  What do you think is the problem? What is the same, it will be a problem under warranty?

  Please let me know what to do!

  Hey Buddy,

  > Does that, it will be a problem under warranty?
  It s only covered by the warranty if it s a bad material work but if it s just a driver or software issue it s no guarantee and you have to pay for this service.

  In any case, it is difficult to tell what the problem is but theoretically, it might be software related only, and even in safe mode, you have several questions, I would try reinstalling Windows from Toshiba recovery disc. This can restore the original (on the parameters of the box) settings and with these settings, everything should work fine. Then you can make sure that it s no problem software or driver because the recovery image is pretested by Toshiba.

  If you still have problems after the installation of recovery contact an ASP!

• Satellite U400: touchpad stopped working after Vista update

  Hello

  My Touchpad U400 cannot work after the upgrade, (under the Vsita system).
  I tried so many ways to solve, but still does not
  Did someone get hurt it?

  I tried to get into the BIOS to enable
  And also tried to download my touchpad driver (but I can find it)
  BTW, Fn + F9 does not work as well

  Please help me solve this problem

  Thank you very much

  > And also tried to download my touchpad driver (but I can find it)

  The touchpad driver is placed on the page of the European driver Toshiba
  http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

  Here, one must choose the right laptop model (see the bottom of the unit model number)
  Then choose the operating system and the touchpad driver should appear.

  PS: there are two touchpad drivers listed on the page; Synaptics and Alps Electric
  Both must be installed!

• Touchpad stoped working after 5 m from the entrance of win8 HP Envy m6-1125dx

  Of the United States, I recently bought a laptop HP, HP Envy m6-1125dx. It comes with Windows 8 64 bit. The problem is that when you use it, 4 minutes of logging into the BONE with my account, the touchpad is not responding, I can't move the cursor, make clicks or the operating system multitouch gestures. The double tap on the upper left side of the touch pad isn't works, whose function is to enable or disable the touchpad above. It happened sometimes this problem, on the second day to have it in my hands, I remember very well. But now after the update some Audio drivers with HP Support Assistant (Intel HD Media Accelerator, IDT High Definition, Intel Rapid Storage Technology drivers), it happens all the time, whenever I log on, 5 minutes after that (sometimes even less), it stops working. Thanks for the help.

  Main office:
  Intel Core 2 Duo E8400 | ASUS P5QC | 4 GB DDR2 800 Mhz. Kingston memory | NVIDIA GeForce GTX 560 | Coolermaster GX750W | ST31500341AS Seagate 7200.11 1.5 to | LG M228WA 22 "HD ready monitor/TV
  Laptop:
  HP Envy m6-1125dx

  Go to your device manager and uninstall the drivers for the touchpad. Once you have uninstalled the drivers, go to the toolbar in the Device Manager and select "Search the hardware changes" and let him update the driver. Reboot the laptop and let me know if the problem persists.

• Satellite L500 - video card do not calibrate

  Hello, I have a portable Satellite L500, who now works on Windows 7
  My problem is that the screen is not calibrate.

  My screen has a thick black line on the right and a little on top.
  The bottom bar is hidden on the screen and I can't get the black areas with the mouse.

  I tried to update the drivers, the resolution setting, reset the video card settings, but nothing helped.

  Any ideas?

  Stand by.
  I assume that you have installed the Win7 clean version, right?
  After the installation of clean operating system, you should be able to see all of the office without a few black lines. According to my Win7 experience has no problem with graphics cards and especially the native resolution is set by default.
  What you need to do is to install the right chipset driver, driver SATA and, of course, display driver available on the Toshiba download page.

  Can you please tell us which model of laptop you have exactly (L500-xxx)?

• The touchpad scrolling has stoped working on satellite

  The touchpad scrolling has stoped working.
  I restarted / reinstalled the driver / reformatted hardrive 3 times (this works but the feature soon stop) / sytem restore / disabled firewall /?

  Can anyone help please it is really annoying me for the first time I'm having a problem with this machine that really gets to me.

  And what satellite you have? Is - this new model of notebook with touchpad buttons?

• Re: Satellite A200 Touchpad work scroll dosnt after installing Win 7

  When I change my windows XP to 7 w my scroll dosen t work.
  What should I do?

  Sorry for my English...

  Hello

  You must install a compatible touchpad driver.
  Choose the Satellite L500 on the European driver Toshiba page.
  Here you will find 2 touchpad Win 7 drivers; Alps Electric and Synaptics.

  Both must be installed!

  Welcome them

• Satellite L500 - 20 X - switch WLAN does not work after upgrade to Windows 8

  Hello

  I extend my Toshiba Satellite L500 - 20 X for Windows 8.
  Unfortunately, since this update my WLAN switch is no longer working. All function keys work only (switch WLAN) F8 to F7, and F9 (touchpad) is more work.

  What can I do?

  Thanks in advance.

  Kind regards
  Klaus

  Satellite L500 is not win 8 taken upgrade supported, so I think that the problem is a missing driver or software

  As far as I know to be able to use the keys FN added value package to win 8 must be installed.
  Check another area driver Toshiba notebook series supporting the Win 8.
  Maybe you could use the VAP released for other series.

• Satellite L500 - missed strikes & touchpad to stop intermittently.

  Hi all

  I recently purchased a Toshiba Satellite L500.

  I noticed that when you type, I missed here and there strikes.

  When I press and hold a key that the letter runs as normal then stops then runs again. It occurs intermittently and a pain.

  I also realized that the touchpad is having the same problem - intermittently, he stops for a split second then works.

  Has anyone else had the same problem?

  See you soon

  Hello

  > I have noticed that when you type, I ran out of strikes here and there.
  Have you noticed even when the touchpad is disabled?
  You can disable the touchpad through FN + F9

  Generally, it is difficult to say what might cause this strange thing is that this problem does not appear when the USB mouse is connected.
  Have you installed the USB mouse driver? If so, then a 3rd party driver can cause this

  Also check if your BIOS is up to date
  I read about similar behavior in the past and some people might solve this new BIOS update Setup