Satellite C855-S5349N: network card fails after Win7 intsaller
Today, I got my laptop Toshiba Satellite C855-S5349N. It was Windows 8 now its 7 I had to erase the entire disk and the backup drive too, coz I couldn't t install Win7.
After installing Win7 I wanted to connect to my Wi - Fi connection it wasn t it doesn't matter what Wi - Fi connection it s such as disabled but when I tried to enable no adapter was there.
So I went to Manager tools and it was hidden but everything was installed, but no external device they were like for the Ethernet controller network controller and 2 more were there with the yellow triangle, but I didn t installed all the drivers after coz installed windows 7 I n t had no driver disk ,
What should I do?
Need help :/
If I understand the question: you are not able to use the wireless Internet not LAN. Is this correct?
Probably, you have not installed right driver LAN or WLan.
Satellite C855-S5349N isn't known to me looks like it came out in the United States.
http://us.Toshiba.com/computers/laptops/satellite/C850/C855-S5349N/
I recommend the page to Support Toshiba us to good drivers.
http://support.Toshiba.com/drivers
but I m not very well what WLan/chip this device supports that you need to check the drivers Wlan available (Intel, Realtek or Atheros)
Your comments would be appreciated
Tags: Toshiba
Similar Questions
-
Satellite Pro L650 - network driver Pb after re - install Win7
Good afternoon.
A laptop computer was infected with a virus, so I re - install Win 7.
My problem is that all network devices don't have 'no driver for this device.
I install the drivers I download, but the problem is the same.
When I view the list of devices, the 3 devices 'unmanned' are:
-Network controller
-Ethernet controller
-Controller PCI (for simplified communications)When I view hidden devices, I see 8 network cards "Miniport".
Please, help me...
Thank you.Best option for you is to reinstall Windows 7 using original recovery image (operating system) you got with your laptop. This recovery image contains all the necessary drivers for all hardware components.
You have installed the Win7 clean version, right?
What Satellite Pro L650 you have exactly (L650-xxx)? -
Satellite M40-136: network card is damage
Hello
I have a satellite M40-136, which is a little more than 2 years. I have cable broadband installed and this had led me to discover that I have a problem with my network card (a Marvell Yukon map I think).
I had guys on the network at work to check the laptop and they say either the network adapter connection is loose or the card is damaged.
I rang one of their guys said tech that I need a new main board because the network cards are integrated on all laptops and PC WORLD.Is this correct? If it is then it will cost an arm and a leg to fix it.
Nicky
Well, that's good.
Map of LAN (RJ45) is soldered on the motherboard.
Perhaps an independent technician with experience might be able to solve this problem, but in general, the motherboard should be replaced.The motherboard is one of the expensive parts and you are right; the new Council is costing a fortune
-
Satellite P100-324 - network card losing connection
Hi all
I'm a new user here, I have a * Toshiba Satellite P100-324 * with Window XP - 32 bit Media Center Edition.
I have problems with my network card that seems to me to lose the connection network and need to reset the IP (repair) every time than in quite awhile to find the connection.What do you suggest to me what is the problem? A hardware problem or a software (driver)?
Thank you in advance.
Hello
At the moment it is not easy to say what is the reason for this, it could also be a problem of the cable network.
Did you check this first with another cable?If you have determined that the cable is not defective, you should try to update the network adapter driver. The latest version which is pre-tested on your laptop is that you can find on the Toshiba site:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download driversDo you have other laptops or computers connected to the router? Maybe the problem is the router
Good bye
-
This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit). Again, I want to remind that I never had this problem before installing Windows 7.
-After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar. (It was how I was welcomed after the installation of Windows 7 is said by the way).
-The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.
Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)
Driver provider: Microsoft
Driver date: 14/05/2009
Driver version: 7.2.1127.2008
Digital signer: Microsoft WindowsThus, we have solved the problem! There are two possibilities of your problems:
1 company Adobe uses the Bonjour service , this service should be disabled.
Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!2. If it is not signed as Bonjour service. Try to disable the service:
Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!
-
5.1 ESXi hypervisor: embedded network card fails on HP ML350p G8
Install ESXi hypervisor to 5.1 fails, causing no network adapters not detected!
Installation stops at the configuration of the network, causing no network interface card
Material is marked as compatible VMware.
When I install WinServer 2008R2 as an operating system, there are problems,
are all the current and functional network card, also the function of the team for failover and load balancing.
So, the material is OK.
Can someone help me?
Hardware: HP ML350p G8
Intel® Xeon® E5-2630 (2.3GHz/6-core/15MB/7.2GT-s QPI/95 w, DDR3-1333, HT, Turbo2-3/3/4/4/5/5)
Intel® Chipset C600
E5-2600 Intel® processor familyAdapter Ethernet 4 ports 331i HP 1 GB
HP ProLiant ML350p Gen8 E5-2630 2 P 32GB - R RAM P420i Hot Plug SFF 750W PS ARE Server
678237 - xx1Processor
2 x Intel® Xeon® E5-2630 (2.30GHz/6-core/15MB/7.2GT-s QPI/95 w, DDR3-1333, HT, Turbo2-3/3/4/4/5/5) ProcessorCache memory
20 MB (1 x 20MB) L3
Memory
32 GB (4X8Go) PC3L-10600R (DDR3-1333) DIMM
NOTE: 20 slots DIMM available.
Network controller
Adapter Ethernet 4 ports 331i HP 1 GB
Storage controller
Controller HP Smart Array FBWC P420i / 2G
Hard drive, internal storage
8 x bays for pluggable SFF SAS HARD drives hot; 2 for Raid-1 BONES, 4 for data as Raid 1 + 0, 2 spare drive
HP half-height SATA DVD - RW optical drive
Power supply
2 x HP 750W common Slot Platinum more hot plug power supply
Fans
4 hot plug, redundant fans and louvers
Accessories
USB keyboard and mouse ship standard
NOTE: The models EURO (-421) excludes the keyboard.
Management
HP iLO Management Engine (standard)Have you tried using ISO custom HP, which includes the drivers in the image;
-
Satellite L735 - wireless network card is not recognized after installing OS own
Dear Sir.
I have the computer laptop satellite L735-M14X part #: PSK0CE-04X01RAR, SERIAL No.: YB321818W
My laptop was windows Home premium 64-bit Arabic and very slow and I wanted ultimate English so I did a format and installed win 7 ultimate 64-bit, and after I installed all the drivers shown in the attached picture 4but wifi still doesn't work do not for a wireless internet connection! (I updated the bios from 1.8 to 2.2 and installed the package of value added and activated the wireless but not active)
so I noticed that there are 2 drivers to lack as in the attached photo 1 & 3 picture and I have not found the required software for them.
also when I was installing the driver 'widipl-20110323155916', is a problem then please check the image2
Please find a good solution without recovery!
Waiting for your help earlier and support
Photo 1
[http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14337/1/1.png]Photo 2
http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/2/2.PNGPhoto 3
http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/3/3.PNGPhoto 4
http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/4/4.PNGAccording to the specifications of the laptop your laptop doesn't have Intel WLAN card. It has Atheros WLAN card inside, please try to install the driver gate Atheros WLAN Toshiba - http://aps2.toshiba-tro.de/wlan/
Please post comments.
-
Satellite Pro U400 - network connection lost after suspend
I have a Toshiba Dynadock. My network is connect directly in dynadock.
When suspend my Satellite Pro U400 and after reboot to continue working I lost my network connection. Then I shut down my computer and disconnect/connect Dynadock I can continue working.
What is the problem?
Dynadock software version is 2.0Hello
I see that you have switched from Vista to XP.
First of all I recommend you update the BIOS.
As I m not wrong on the European driver Toshiba page, you should find a newer version of the BIOS.You will need to upgrade Win XP to the last State.
The XP must be up-to-date and all service packs, hotfixes and patches MS must be installed in your laptop.Access the Device Manager, and then score in each USB hub root, you must disable the option called allow the computer to turn off this device to save power
You can find this option in the properties-> tab power management -
Satellite A300 - Webcam driver open fail after the upgrade to Windows 7
Hello
Given that I improve my system to Windows 7 64 bit does not work my webcam. After installing the driver I get the message "webcam driver open failed. "Please restart camera or computer. The camera also do not appear in Device Manager and the microphone are not working also.
I have a Satellite A300-1LT.
Help!
Tal
Hi pro.surfer,
You know the forum search? If this isn't the case, you must use because you will find many threads with this error message and lots of useful training, what to do to.
I put t know which driver you mean, but you need the Camera Assistant Software for webcam. The microphone is a part of webcam, so you need to install the driver for the webcam. ;)
-
Satellite Pro C870 - Internet connection fails after a fashion 'sleep'
SATELLITE PRO C870-19N. Internet through an ethernet cable. Windows 8.1
Hello
My problem:
I turn on the computer. It recognizes the connection internet (Ethernet cable). I work without any problem... and I left (a few minutes)... I come back. Black screen, computer sleeps. I wake it up - I have to enter my password - and he says there is no internet connection... I have to stop it and restart it.Can you help me?
Thank you.
This problem occurs using only the LAN connection or have you noticed the same situation using Wireless LAN?
In case this happens only by using the LAN connection, I recommend you to check if you can update the LAN driver.
You can also right click on the network icon (in the taskbar) and could choose to diagnose and repair.
-
Satellite A60-wireless network card
Hi I have a psa60e anyone know where I can get a wireless LAN card, in my opinion, he is the one who will go inside because I don't want one of those pcmcia cards that come out of the side
any help would be appreciated as toshiba have already given this model and the web site has going me round in circles for part only
Hello
for Satellite A60, you can use this map:
Wireless LAN Mini PCI Card (802. 11 b / g)
Part No.: PA3300U-1MPCYou can find it on the web page of Toshiba.
Good bye
-
Satellite L500-1WG: network card works no - 31 code
Hello!
OS: Windows 7 / 64-bit.
I try to connect my Satellite L500 to WNAP A-Link 802.11n WLAN AP ROUTER 3 G via an adapter (Intel 82567) without success.
Under the general tab device manager says "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) ». Then I updated driver-> Windows has determined the software driver for your device is up to date. Always the same message coming in general tab.
Anyone have similar problems?
Sitiper
Hi mate
This device doesn't work properly? Is - this WLan or LAN card?
I m a bit confused butAs far as I know the LAN and Wlan cell phone support for Realtek card.
So, you can download the two drivers from Realtek page directly.Please set the BIOS to the default settings before you relocate for the two pilots.
I hope this will help you!
-
How to install a minPCI on Satellite A30 wireless network card
Just signed up for broadband services and got myself a wireless router. Satellite A30 I use has the ability to connect wireless but a mini PCI Wireless.
Before I go ahead and buy a card (instead of say a USB wireless adapter) I wonder how the cards are easy to install? -It looks simple enough.
In addition, the cards I have met on Ebay, all seem to be pretty standard, but are there any features or specifications should I look out for or seek to avoid?
Probably pretty simple questions, but I think it's better to get it right the first time, rather than ordering something, I can find is not compatible, or that I can not install.
Andy.
Hello
Can you please send what Satellite A30 you (A30 - xxx)?
Anyway, if I remember well WLAN upgrade shouldn't be problematic (if the laptop WLAN ready). In the lower corner you will find the WLAN card cover (a smaller one). You can find the WLAN card slot. Put the card inside and connect the WLAN antenna. The white cable be connected to the HAND and black to the auxiliary voltage
-
Satellite L100: Wireless network card does not recognize media
I bought a Wifi (Gigabyte gn-wi01gs) to my L100, but this card does not work. I installed all the drivers, but it does not recognize any network. No other computer has a problem.
This shows that, when I press Fn + F8 "wireless communication is disabled. Please activate the wireless communication switch "." What 'switch '? There is no switch!
What should I do?Someone mentioned here in the forum that with the version of the BIOS under 2.10, the Wireless LAN card is unable to get a correct IP address of the connected Access Point or it is impossible to get a connection point of access to all.
Added the new BIOS that fixed a problem with the wireless LAN switch kill, the switch did not work properly.
WLAN should be activated by pressing FN + F8.So please update the BIOS to Version 2.10 or higher, but don't forget to use the good BIOS and the correct procedure of updating the BIOS!
Incorrect BIOS may damage the motherboard. -
CCC and AMD graphics card failed after the driver update
I have a HP Pavilion dv6 laptop 6 c-32eg.
I recently tried to update my GPU driver, as was necessary to run a particular program (oclHashcat, if you're interested). I downloaded the installer from hereand he ran. It looks good, but after the required reboot, the screen resolution has been set at 800 x 600, instead of the usual 1366 x 768. Then, I got an error message saying something in the sense of "your AMD driver could not be installed because you do not have the required equipment. In Device Manager the GPU was something like "usinig windows has stopped this device because it has reported an error."
If I try to open the CCC, the program runs for several minutes, with a relatively high CPU usage in the Task Manager, then the message "' Catalyst Control Center: the host Application has stopped working". "
I have now tried different ways to solve this problem, which none have worked. Try to download a driver on the AMD website did not work, because the site said that the pilot was not appropriate for a computer with switchable graphics.
My laptop doesn't seem to be using the AMD GPU as you try to run games as a test done drip slowly and with a minimum resolution.
My laptop has doubled (switchable CCC) graphics:
-AMD Radeon HD 7690 M XT card, with a 8.882.2.3000 driver version and date 30/09/2011.
-And Intel HD Graphics Family, with, apparently, the same driver version and date as shown above. I can't know exactly what kind of GPU Intel it is.
I also tried to update the graphic driver Intel, to see if that would fix the problem at all, but it made it worse: the screen become very red and low resolution. I fixed that by returning to a point just before performed system restore. Unfortunately, I don't think to do this before initially updated drivers.
So, my question is: how to I find the full use of two graphics cards?
Here is a copy - paste of my information system:
Spoiler (Highlight to read)The performance Information and tools
More details on my computer
Component Details subscore Base score processor Intel (r) Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low memory (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 5861 MB Total graphics games Graph available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home Premium
System manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC Total amount of memory 8.00 GB RAM type system 64-bit operating system number of processor cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD adapter type chart display)))) chart Intel(r) HD Graphics Family total available graphics card dedicated 6373 MB memory 2560 MB memory dedicated system memory 0 MB Shared system memory 3813 MB Display adapter driver version 8.882.2.3000 monitor main resolution 1366 x 768 DirectX version DirectX 10Information on the performance and tools more details on my computerComponent details subscore Base score processor Intel Core i5 - 2450 M CPU @ 2.50 GHz 7.0 5.9 determined by subscore more low (RAM) 8.00 GB 7.5 graphics Intel(r) HD Graphics Family 6.6 graphics games 5861 MB Total graphics memory available memory 6.6 main 298 GB HDD free (462 GB Total) 5.9 Windows 7 Home PremiumSystem manufacturer Hewlett-Packard model HP Pavilion dv6 Notebook PC type system memory 8.00 total GB system RAM, 64-bit operating system number of processors cores 2 total storage of 1397 GB disk partition size or your hard drives (C 298 GB free (462 GB Total) disk partition (D 325 GB free (932 GB Total) disk partition (E free 1 GB (4 GB Total) Media Player (F CD/DVD graphics Intel(r) HD Graphics Family Total graphic card available 6373 MB memory dedicated graphic 2560 MB system memory)))) dedicated memory 0 MB shared system memory 3813 MB version 8.882.2.3000 type graphics card driver monitor main resolution 1366 x 768 DirectX version DirectX 10Hello
There may be a 3rd option left that you can try for one more set to gpu driver updates, but I would first get your system to a State where the switchable graphics work correctly.
Try restoring the system first.
If this does not work, the driver package AMD (containing two gpu drivers) you need can be downloaded from HP on the following link.
http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe
In this case being able to find a game more set to driver updates, many people with your type of switchable graphics succeeded with the offers on the 3rd party site - I strongly recommend to read the Manual to get an understanding of how it works and why driver signature enforcement must be disabled in order to load these drivers.
Kind regards
DP - K
Maybe you are looking for
-
Hello I am facing a strange problem with my iTunes for Windows: after sharing iTunes on my iMac (Mac OS 10.11.4, iTunes 12.3.3.17) House and connect to a Windows PC's iTunes library, I do not see the button import on iTunes from my PC. The iTunes Ver
-
During the audit of the optional updates, the Updates MS page is not a custom option
Since I was MS Security Essentials started running every day, I was not surprised to see the following excerpt from page Update MS: no high-priority updates are available for your computer. To check the optional updates, go back to the home page, and
-
"When I try to connect wirelessly" linsky "my pc tells me that it has detected a problem with linsky @ shuts down the system. Have tried to reset wireless, also disabled the system for several minutes @ and then restarted. Still nothing.
-
XPS-200 [and Dimension 5150C] memory addressable issue...
I have a question on a very old PC - Dell XPS-200, Intel D 820 2.8 GHz, BIOS A07 - I am fixing to the top for a friend. Windows 7 Professional installed a 64 bit version of the operating system and properties system reports it as a 64-bit system. How
-
keeps telling me to choose another location - Download 30 G, while the player has 50G of free space... I created a new profile, tested and run other apps on this drive with the new profile... checked the page in the file settings... I tried downloadi