Satellite L30: CFSServ "Windows Socket error.

Similar Questions

• Satellite L30: Cannot watch DVDs - error between the decoder and the graphics card.

  I'm watching DVDs on my satellite L30, but also good Windows media player and the application of Toshiba, will not let me.
  He said that there is an error between the decoder and the graphics card.

  I checked and I'm set for region 2 and windows says I have the right drivers for the dvd and the graphics.

  Any help would be appreciated with gratitude

  Hello

  Try it please with the K-lite codec pack. Download and install it. Maybe it helps.

• Satellite L30 won't start - error below messages

  Can anyone help please? I have a satellite L30 & out of no where it does not start
  below error. I entered the bios & checked initialize preferences (disk HARD, ETC.)
  but all I get is the message below. I also tried a system restore, but nothing.

  For realtek RTL8139 (X) /8130/ 810 X PCI fast ethernet controller v2.13 (020326)
  PXE - E61: media test failure, check cable of
  PXE - M0F: Existing PXE ROM.
  operating system not found

  When I boot with the recovery CD in I get the message below

  Windows has encountered a problem... etc etc etc the usual windows bit.
  then

  status Oxc0000e9
  Info unexpected i/o error has occurred

  Thank you all
  Mark

  In my opinion, the HARD drive is certainly the reason why the laptop tries to boot from LAN.
  Yes, the laptop computer tries to boot from LAN and, therefore, the error message (PXE - E61: media test failure, check cable) is displayed.

  I think that a HARD drive replacement and the new installation of the OS will help you solve this problem.

  Greetings

• Satellite L300 - T2FTP Windows sockets of initialization failed

  After login, I get the following message:

  T2FTP Windows sockets of initialization failed

  At the same time, the system issues a message that he has found a new unknown device and the driver must be installed.

  Before that I did NOT add a new hardware device.

  Click the button start only generates a message: Windows Explorer does not react.
  It is impossible to call any other routine.

  Unfortunately I can not find my recovery CDROM.

  Are there opportunities to save my system?

  Toshiba Satellite L300 model PSLB8E
  Windows VISTA-32 bit

  Hello

  I never met such a problem. Have you installed any programs recently? It seems that the software related issue. To be honest, it is sometimes easier to reinstall the operating system than to try to fix it.

• Port USB of the Satellite L30 stop Windows when using

  I recently bought a Satellite L30 (psl33E) for my wife and everything seemed fine. That was until she needed additional usb ports for his stuff and used the port on the left side of the machine (as opposed to the one still in use, in the back). As soon as she tried to use this port in particular, the close dow and has done since then.

  Could someone tell me please how to fix this, because it is only a few weeks old, and I don't want to take it back to the store where it was purchased.

  In the hope of a miracle.

  TIA.

  JimmyMack.

  Hello

  It really looks like a serious hardware problem. I guess that the USB port cannot deliver enough power when other ports are in use.

  If I were you I bring the machine or contact the nearest available service partner in your country and allow them to correct this problem.
  Here´s a link to find the closest of the ASP available in your country: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871

  See you soon

• Satellite L30 - 10V - disk read error. Please press ctrl + alt + delete for remained

  Hi guys

  Off my Friday morning L30 - since then it came with "playing a disc error. Please press ctrl + alt + delete to restart»

  Done several times - no joy so decided to drive the product recovery was necessary - put this in (& tried 3 times since!) & all I get is a menu 'Start repair' indicating "windows cannot repair this computer automatically" tried all options, he throws at me, but he said "If you continue to see this message, contact your system administrator or computer manufacturer for assistance."

  HELP PLEASE! It is FUBAR or can the sick man computer repair - or better yet - can it be fixed at home with a few suport?

  Thank you!

  Hello

  To me, it seems that the HARD drive has developed a fault.
  Error message: error reading disk. Please press ctrl + alt + del to restart is a typical notification if something would be wrong with a HARD drive

  You can try to check the HARD disk using a disk HARD Drive Fitness Test.
  It s free tool google for it if you need details

  Run the test and check if the HARD drive is OK.
  No, then you will need a new HARD drive and you need to reinstall the operating system.

  Welcome them

• Satellite L650 und Windows 10 error: this CPU is not supported

  Hello

  I have the satellite L650 not modelsk1ja-0e8017

  Recently I have continually mistake to Get windows 10 app 'this CPU is not supported.
  I try by activation and deactivation of NX bit, but it does not work. When will you provide new bios after the version 2.4 of the BIOS?

  I read on the similar message on CPU is not compatible with the new system Windows 10.
  Obviously this is a bug in software and it would be already solved Ms.

  I recommend you to check the updates system available for download and installation, install all Windows patches, reboot the laptop and re-run this tool from Ms.

• Satellite L30-101 - DVD read error CD player

  My carpet * a DVD UJ-850 s recognize that occasionally an audio CD - I get a prompt "Insert the disk in the drive" as if there is nothing there. When downloading iTunes CD music, reader recognizes best 1 on 3 CD.

  If I remove the CD and clean it sometimes recognize the drive when I reinsert, but not always and it frequently does not recognize new disks. Player does not seem to have a problem reading DVD and burn a disc if I can get it to recognize the blank CD.

  Is it a question of laser? My drivers are up to date and Device Manager claims the player works correctly. It should be re-install the drivers?

  I'm running on Windows Vista.

  Hello

  It is not easy to say why this happens especially if the issue occurs sometimes.
  Always is it that ODD (optical disc drive) laser has a different position for DVDs and CDs so perhaps is there a problem with the calibration of the laser.

• Satellite L30-115 - where to get XP Recovery disk?

  Hello

  I lost my Toshiba Satellite L30 - 115 Windows XP Home Edition * CD Recovery *.

  How can I get another? Thank you.

  Hey,.

  New Windows XP Recovery disk, you can get a provider of service authorized in your country. Just ask the guys if they can order one at Toshiba.

  Here is a list of all the FSA:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Satellite L30-149, only works with external monitor and VGA mode

  Satellite L30-149, Windows XP Home Edition

  Yesterday I did face the following problem:

  I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

  And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

  Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

  --
  Upgrade to this message (what happened after that I wrote the above text).

  I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

  Post edited by: mpetas

  > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  This sentence is very interesting.
  Sounds like a question of FL-ups!

  It is a small part behind the screen and control the backlight of the screens.
  Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

  If your warranty is valid, then everything should be done for free.
  Try to contact the ASP in your country and ask for later handling.

  Greetings and good luck

• If I copy the folder "LCD", Tomcat will start with socket errors

  In the documentation , it is said that when you create a new application server side, you can start by copy folder "webapps/lcds. I did, but then, Tomcat starts with a few socket errors:

  [LCD] SocketServer 'my-rtmp-SocketServer' could not validate settings desired for BindSocketAddress socket: 0.0.0.0:2038

  java.net.SocketException: unrecognized Windows Sockets error: 0: JVM_Bind

  [LCD] SocketServer 'my-rtmp-SocketServer' could start.

  flex.messaging.LocalizedException: SocketServer 'my-rtmp-SocketServer' cannot bind to accept client connections on port '2038' because another process has already bound to the port. Please ensure that several points of endpoint applications are not configured to use this same port.

  I'm doing something wrong?

  Thank you

  Borek

  What is happening is that you have found a port conflict for the based on the socket NIO and RTMP endpoint points used in the channel definitions in services-config file. XML of your new web application. The problem is that you have end points related to the port in the network of LCD screens and your new web application.

  You can deal with it in two ways:

  Option 1: In the file services - config.xml, look for "RTMP" and "IAN" to find the definitions of strings and to change the port numbers for something slightly different from those used in the LCDs web app.

  2 options: Move the LCDS web application out of the image so it does not get loaded and just use a template for the future web apps. If you do not use it for all your development, there is really no reason that you must load.

  I'll add a note about this to the documentation which speaks of the LCDS web application using as a model.

• Satellite L30-106: Power Saver 0x7E error

  Hi all
  I own a Toshiba Satellite L30-106. I got it from Windows Vista to Windows XP pro, I installed all the Xp drivers provided by the Toshiba site.

  Everything is going well except for the Toshiba Power Saver utility, I can't install it, it still gives this error: error Power Saver 0x7E. Same thing happens when I want to uninstall it. How can I solve this problem?
  Thanks in advance

  Hello

  I hope that you have installed the power saver right!
  The laptop is one of the series PSL33E. Therefore, you should choose the drivers and tools for this series!

  In addition it is very important to install the driver Toshiba and utilities in the right order!
  Then open the installation instructions and follow the lines of this guide!

  Please make sure that you have already installed "TOSHIBA common Modules or / and TOSHIBA Hotkey Utility" ahead!

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• Satellite L30 - 10Y: error checking after the 2 GB of RAM

  Hello

  I have a Satellite L30 - 10Y ^ months ago I walking the RAM 1.5 GB by adding a card of 1 GB of RAM in the 512 MB card provided it worked well.
  I also have walking my son Hi-Grade lapto with exactly the same specifications of RAM that worked well also. So I decided to grade until my L30 10Y with another card of the same specification to bring it up to 2 GB as specified by TOSHIBA.

  I booted the computer to find Hay presto after the message following the start screen appears * "_the file is possibly corrupted.
  The file header checksum does not match the calculated checksum_ "* the computer then froze and I turned it off."

  Controls, I did tried two cards into the two slots without change, 1 card in both slots (an empty) works very well. Other card in the two sons of slots (works Fine) the two card slots in my computer (works very well) all three cards and 512 MB card in the configuration of the slots and cards (works fine). The three cards 1 GB in all configerations cards and slots to the error message and other times 1 long beep and 2 short.
  Yes, the cards have been installed correctly. Impossible to change something to do with the BIOS, even though it may be accssed. Cannot run dvd player although I can select.

  I went back to 1.5 GB and reinstalled all OS the drive recovery Toshiba try all over again the same results. Running windows Vista Edition family Basic, Bios is the last download. RAM is compatible. Cheep Hi-Grade son accepts that all RAM in all Configurations without sentence windows XP operating system.

  Can anyone think of anything either, I have not tried, or I just have to go and by a Hi-grade computer?

  Hello

  I read your announcement carefully, and it seems that you have checked that everything what is possible
  So in my opinion the two ram modules are not compatible set
  It's the only plausible explanation for this problem.

  AFAIK the L30 - 10Y needs DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM modules.

  Finally the short beeps are coming from the BIOS and it means that the error has been detected.

• Satellite L30-113 cannot start Windows OS

  After downloading upgrades my computer does not start at the top. My computer screen shows a black screen, red, writing in the middle. He then goes to the screen, then go to windows error recovery page when you press on enter too lance beginning repair it then repeats the process and also switches its self off when you press start windows normally. I can't find the boot disks, the laptop is a Satellite L30 - 113 series.

  Mary Anne.

  Hello

  I had a similar problem on my computer but was able to fix it.
  I took my CD of Win XP and started the repair console.

  Then I used the command Chkdsk and scanned and repair files and sectors on the HARD disk.
  Then I used the Fixboot command. He writes a new boot sector on the system partition.
  Finally used Fixmbr command that repairs the boot partition's master boot code.

  Check out this page of MS:

  [How to install and use the Recovery Console in Windows XP | http://support.microsoft.com/kb/307654]

  Good bye