Satellite L30 won't start - error below messages

Similar Questions

• Satellite L30 - 10Y always starts with the message of repair

  Hello

  Whenever I try to run my Satellite L30 - 10Y (PSL33E) I get the window with the message Startup Repair (Windows cannot repair this computer automatically).

  I went through the list full repair and still have the same message.

  Can someone please?

  Hello

  Maybe the operating system is confusing upward
  Have you tried to restore using the Toshiba Recovery disk?
  Check if it works!

• Satellite L500D won't start

  Hello

  My Toshiba Satellite L500D won't start.

  When I start my laptop lights three on the light green left, the two on the left are not green or red. I hear the coolingfan, no beeps at startup. When I start the laptop with a systemdisk is the same, nothing happens.

  I have contact the supportdesk and they said it could be the hard drive, this seems a little strange for me because I can't begin with a systemdisk.

  I hope someone can point me in the right direction

  Buddy

  Hello

  Unfortunately on this virtual path, it is not easy to say with certainty what can be the problem.
  It will be interesting to know what you did with your computer laptop last days.
  Have you installed some day or anything that may be responsible for the issue described?

  Update the BIOS maybe?

• Re: Satellite L30 does not start after adding another stick of 1 GB memory

  I bought 1 GB PC4200 533 MHZ DDR2 SODIMM memory module for my Toshiba Satellite L30 - 10v (PSL33E) to make it 2 GB. After you have added the 1 GB modules Satellite L30 wouldn't start. With only 1 GB, that it starts ok, with the other 1 GB origianal only boots ok. (The two modules are ZCE6 430 - K4T1G163QB Samsung 1 GB PC4200 533 MHZ DDR2)

  The two modules of 1 GB boot not together. I noticed that many others have had this problem. (please see
  This [t-22984]. post)
  On this forum, someone bought the CT12864AC53E memory module which works, however I can't find this on the site of Crucial.
  I've heard other purchase the sticks of memory CT572238 and CT572234 and have the same problems.

  Memory Advisor says determinative buy the CT572234 memory sticks.

  I have also updated the bios to V3.10, still does not start with the two modules.

  I'm ready to buy 2 new modules, but what 2x1GB memory works?
  Any help would be greatly appreciated...

  Post edited by: quigs1969

  > 1 GB strips boot not together. I noticed that many others have had this problem.

  For me it s case;
  The two modules don't work together
  Seems the modules are not compatible there is only one solution. Replacement of RAM!

  Try other RAM modules.
  I bought a few modules from Kingston and made good experience

• Won't start, error message empty

  I bought, installed and started using Dreamweaver 8 on my Mac OS x 10.4.7. I exit the application. When I tried to open subsequently, it won't start and the error message is empty (other than the! sign and the "ok" button). I can't find anything in the knowledge base supprt data for help. I do not want to reinstall because then I will use my second and final installation.

  > because then I will use my second and final installation.

  No, you won't.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "davidoconnor123" wrote in message
  News:eavkf4$M4U$1@forums. Macromedia.com...
  > I bought, installed and started using Dreamweaver 8 on my Mac OS x 10.4.7.
  > I
  > exit the application. When I tried to open it later, it doesn't start and
  > the
  > error message is empty (other than the! sign and the "ok" button). I have
  > can not
  > nothing found in the knowledge base supprt data for help. I don't want to
  > reinstall it because then I will use my second and last
  > installation.
  >

• Satellite C650 does not start - error PXE - M0F

  Just bought a Satellite C650, get it home and my son decided to stop the whole upward as he ran.

  Now, we get the error below:

  Check the connection of the cable!
  PXE - M0F: Exit Intel PXE ROM
  No boot device - insert boot disk and press any key.

  We received no drives, nor a manual with adequate instructions and can't find anything on the web for help.
  Toshiba closes for the day.

  Hoping that this forum could give me an idea.

  Hello

  PXE error is displayed because the laptop has attempted to boot from LAN.
  Why it does not start from the HARD drive but LAN switches?
  I think the HARD drive is defect.
  Perhaps its also not recognized in BIOS.

  Switch on and press F2. This allows you to access the BIOS where you could check if the HARD drive is recognized. I guess it must be mentioned on the first page.
  If it s not there, then it means that the HARD drive is dead and must be replaced.

  I assume that the warranty is still valid; Therefore, you should get in touch with Toshiba ASP in your country for replacement.

• Satellite L30 does not start

  I have a Satellite L30 101 and since he was able to load!

  The first time I turned it on it loaded correctly, then once the Windows XP logo came to the top of the screen started showing horizontal lines across the screen pixelated. It was clear after some time he'll luckily to load properly, so I turned it off. I then loaded it up.
  The power led and the activity indicator is entered, but the screen remains blank and nothing loaded.

  There is also very little noise from the computer, I expect that there is some sort of noise from him during this phase. I tried to turn on the computer again just before sending to it the power light just now and still it will not load.

  Anyone know what could be causing this? Or have any ideas at all?

  I'm skilled enough to build desktop computers, computers laptops not so much, but I'm willing to try to disassemble the laptop to see if I can find something that might be wrong.

  Where would be a good starting point?

  Russ

  > screen started showing horizontal lines pixelated across the screen. It was clear after some time he'll luckily to load properly, so I turned it off. I then loaded it up. The power led and the activity indicator is entered, but the screen remains blank and nothing loaded.

  About your message, to me, looks like the graphics card would give up.
  Pixelated horizontal lines could be a sign that would confirm my hypothesis.

  I fear that this could be a serious hardware malfunction: (m
  The graphics chip is attached to the motherboard and in this case the motherboard needs to be replaced
  and this could be an expensive affair because the motherboard is one of laptop parts cheap!

  However, these are only my personal assumptions and if you want to be 100% sure what harm s with your laptop, then a laptop technician should check the hardware parts

  Man Bye

• Satellite L30-113 cannot start Windows OS

  After downloading upgrades my computer does not start at the top. My computer screen shows a black screen, red, writing in the middle. He then goes to the screen, then go to windows error recovery page when you press on enter too lance beginning repair it then repeats the process and also switches its self off when you press start windows normally. I can't find the boot disks, the laptop is a Satellite L30 - 113 series.

  Mary Anne.

  Hello

  I had a similar problem on my computer but was able to fix it.
  I took my CD of Win XP and started the repair console.

  Then I used the command Chkdsk and scanned and repair files and sectors on the HARD disk.
  Then I used the Fixboot command. He writes a new boot sector on the system partition.
  Finally used Fixmbr command that repairs the boot partition's master boot code.

  Check out this page of MS:

  [How to install and use the Recovery Console in Windows XP | http://support.microsoft.com/kb/307654]

  Good bye

• Qosmio G20 - won't start, error ATA #1

  I have a G20-102. Today I opened my flash drive and files all showed them as shortcuts. I tried to connect to Firefox 4 and a warning from AVG threat came pointing to C:\windows\system32\mssrv32.exe (Tr/Crypt.xpack.Gen3) as a Protection of identity. I opted for the "Move to vault" option and asked to restart

  Now my pc won't start - I get the Qosmio screen, ATA error #1 (CD player has been removed) and then the screen "rolls" - looks like random pixels flashing on the screen. I'm trying to start safe mode, but F5, F8 or any Fkey is not doing

  To make things worse, the CD rom has been removed, faulty, so I can't boot from another device. I don't have a USb in the BIOS, only FDD option which I did not

  Help, please

  Hey,.

  To me, it looks like a serious hardware malfunction

  You could try to load the default settings in the BIOS. Enter in the BIOS, and then press the F9 key to load defaults. Then save & exit the BIOS and try to start again.

  The HARD drive is recognized correctly in the BIOS? If so I try a recovery disk Toshiba recovery installation and check if the problem is hardware or software partners.

• Satellite L30 does not start after the BIOS update

  Hello

  I upgraded my BIOS Satellite L30 and now the laptop will not boot. When I turn on the fan starts and that's it. I think I have updated the book with the bad BIOS... The laptop is only 1 day old... Is it possible to reset the machine to the default BIOS.

  Help, please...

  Hi Scott,.

  Unfortunately there is no easy way for you to go to your BIOS to its previous level. You need to entrust your laptop to a Service approved partner who has the necessary equipment to Flash the BIOS to the previous level.

  Kind regards

• Satellite L30 does not start after the upgrade to 2 GB of memory

  I bought 2 GB Crucial memory for my L30. After removing the 512 MB module and adding two modules of 1 GB the L30 wouldn't start. With only 1 GB start ok ok, with the other boot only 1 GB.

  Either 1 GB modules and module of 512 MB with start ok. The two modules of 1 GB boot not together. Crucial gave up and offered a full refund, but I'd rather have a solution if possible.

  At the BIOS level is 2V30, that I understand to be the latest version available.

  Ideas please, John

  Hello

  You're right, this problem seems very strange and I wonder why this happens.
  Satellite L30 certainly supports the 2 GB of memory and you should be able to upgrade with 2 x 1024Mo modules!

  It's strange, but it seems that these two modules are not compatible together
  I found Toshiba recommend module on options and accessories site.
  DDR2 400/533 1 GB (PA3411U-1M1G) maybe you could try this one...

  In any case, I don't think that you will be able to solve this problem in another way. The modules must be replaced.

• New Satellite P300 won't start.

  I hope you can give me some advice. This week, I bought a new Toshiba P300 GU with Vista Home Premium. It worked fine for about 3 days, but now it won't start at all.

  Symptoms:

  * - Some LED lights blink for a second, then they stop again.
  * - No fan or drive noise.
  I tried to remove the battery and power cables and left the computer for a day before trying again. There is no difference except for a few plus-lumieres LED flashes for a second, the first time I try to start the computer. The next time I try, only a few lights flash again.

  After I discovered the startup problem I noticed that food is quite noisy. I also noticed that the machine has a small mark RENS in the plastic in the upper left above the screen. (Looks like a defect of manufacturing error or transport) You hardly notice the 1 cm small inconsistency in the plastic, but it doesn't look like a normal scratch.

  As I thought that food could be the cause of the problems because of the strange sounds, I brought the maschine to a PC technician today. He tested the food and said it was working normally, but he also said that this should not seem like that. He did not open the laptop, to not cause trouble about the Toshiba warranty.

  I bought the computer to the Denmark I wanted a Danish keyboard. However, I live in Portugal, where I use the computer. Where is the PC now.

  Do you recommend that I contact an ASP to the Portugal to fix the PC or do you propose I have return the PC to the merchant at the Denmark?

  The ASP will be able to exchange the screen and power supply that are not in the State, they must be good obviously both?

  Thanks for the tips!

  Hello

  First of all I must say I never had problems after 3 days of my new Toshiba laptop but these things happen and no manufacturing activity is perfect.

  In addition, I agree with you. I would bring the laptop to an ASP because it seems that this motherboard is defective but I do not know Mr. it's only my personal opinion, and therefore the laptop should be checked by a technician for laptop.

  As far as I know that the laptop is covered by 1 year international warranty and so I would contact the ASP in your country. Ask them if they can fix your computer laptop and if not, you must communicate with other ASP where you bought the laptop.
  I think this is the best solution because they can tell you what to do exactly.

  Good luck and I m sure that your laptop will be repaired as soon as possible.

  Welcome them

• Satellite L30-11 - cannot start with drive HARD 750 GB (Sata II)

  Hello world

  I want to move to the size of the HARD drive in my laptop satellite L30-11th 120 GB at 750go (seagate momentum).

  I mist update BIOS firmware to the latest version (on the Toshiba site: V 3.1).
  When I start a press the F2 key at the same time, I can access the BIOS that shows the HARD drive. However, when I try to go further and to boot on the Windows 7 installation disc, nothing happens (although it does not start when I put the original 120 GB HDD).

  I have another (also Sata II) 320 GB HARD drive that works well.
  So, it doesn't seem to be a problem of Sata, but more a question of size?
  Any idea what it could be?
  If it's a question of size, how I can fix my pb?

  Thank you very much in advance for any help that you could give me

  Re

  Jérôme

  In my view, there is compatibility problem. Maybe you should not go over Board with upgrade of the HARD drive.

  Buy a HARD drive with a reasonable capacity. 400GO not enough for you?

• Satellite L30: Cannot watch DVDs - error between the decoder and the graphics card.

  I'm watching DVDs on my satellite L30, but also good Windows media player and the application of Toshiba, will not let me.
  He said that there is an error between the decoder and the graphics card.

  I checked and I'm set for region 2 and windows says I have the right drivers for the dvd and the graphics.

  Any help would be appreciated with gratitude

  Hello

  Try it please with the K-lite codec pack. Download and install it. Maybe it helps.

• hpdv6000 won't start - error updates configuration? !!

  My HP Pavilion dv6000 won't start.

  When I turn on my laptop it goes through the normal stages of start-up, however it comes up with "configuration updates: stage 3 of 3-0% complete.". Do not turn off your computer.

  It remains on this page for a few minutes with the hourglass of thing going, but nothing happens - it stays on 0%

  The computer then turns off and turns back on again and repeat the process of a second later.

  I can't clear the checkpoint!

  This morning, I thought that it would be alright because instead of going to the screen updates it came with the users screen. I clicked on my profile, entered my password, but then it froze. ??!!??

  So I have held down the power button, it has left a few minutes and turned back on but not luck.

  Continuing along in circles.

  Help... :/

  Hi catMshaw,

  Take a look at the procedure in this document and let me know if this helps your situation.