Satellite L30 wireless connection problems

Similar Questions

• Satellite 2800 - wireless connection problem

  I'm sure this has been covered, but after more than an hour on the forum trying to navigate to find I dropped...!
  I recently formatted my hard drive, thinking that I had covered all the bases. No matter what I download to raise wireless internet and running again, nothing works. I have a method NP543 card (works well before) and downloaded and installed everything I'm told to do. I have run the command of thumb between my computers and had no trouble to set up my main computer (xp), mac - the wireless router method but I am at a loss here. He returns constantly with no hardware installed - with being the culprit - ethernet controller message apparently... I downloaded what was informed via the Web from Toshiba site and a few other recommendations randomly the other forums.
  I hope someone can point me in the right direction that I work from home and am now about 1 week behind... Thank you!

  You use the software method to configure the wireless connection? Or do you use the Microsoft Automatic Wireless Configuration service?

  You see the connection Wireless in the list?

  Can you connect to the connection, but Internet is not working?

• Satellite P300D - wireless connection problems

  Good evening.

  Sorry for my bad English.

  Here's my problem: whenever I try to install my wireless modem, my computer shuts down, the blue screen before connecting off the coast with many words that I did not have time to read.

  The modem is certainly not a problem, as I tried it on another PC and it works perfectly fine.
  Can you help me?

  Hello

  If I understand correctly your problem; the BSOD (blue screen of death) appears during the installation of the software for the external Wlan modem immediately.
  Right?

  I assume you are using portable satellite P300D Win 7 on your computer.
  There may be a compatibility problem with Win 7 OS?

  > The modem is certainly not a problem, as I tried it on another PC and it works perfectly fine.
  Have you tested the modem with the other Win 7 computer?

  The other hand the Mobile supports an internal Wlan card.
  Have you tried an update of the Wlan card driver?
  To do this
  Here you will find the latest drivers:
  http://APS2.toshiba-tro.de/WLAN/

• Satellite U500 Wireless connection problems

  Hey guys!

  I bought a Toshiba U500 a few weeks ago and I'm getting some very annoying problems with wifi...

  It has a Realtek RTL8191SE Wireless LAN 802.11n PCI-E network card.
  It connects to the router, but soon after, and for the time that it is connected it is still at a very low speed (although it shows the maximum signal). The OS is Win7 and it came all installed and ready to use.

  Please help me solve this problem! This is quite annoying and I plan to return, because I use this phone especially to be in the internet :(

  Thank you!

  Hello

  Please check these options first;
  -WLan driver update. Use the latest Wlan driver
  -BIOS update. The BIOS must be updated.
  -Set the default BIOS (F9 in BIOS, then save changes)
  -Update Windows to the last State
  -Check settings in device-> WLan card Manager-> properties-> Advanced tab
  Change the WiFi channel, use a WiFi standard 802.11 B or G, etc.

  PS: You can pass the latest WLan driver
  http://APS2.toshiba-tro.de/WLAN/

• Satellite L650 Wireless connection problems

  I can't connect to my router. It shows my network as excellent connection, but he always tells me that it is unable to connect to the network.
  I then solve the reason, and he tells me to reset my wireless network adapter.
  Help, please.

  Hello

  As I ve understood your question WLan; the WiFi network is visible, but you can not connect. Right?
  Well, it means that the WiFi is enabled.

  In your case I would recommend first of all and the WLan driver update:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  After that, you should check the settings of the Wlan router; Maybe the MAC address filtering is enabled
  In addition, you must check these settings on both devices (network router and local WLan card):
  -WLan encryption
  -Password encryption WLan
  -WLan channel (in Device Manager-> card WLan-> properties-> Advanced tab)
  -Standard WLan (802.11 A, B, G or N)

  Good luck

• Pavillion G6 2014tx: wireless connectivity problems

  Since the last 2-3 months, my wireless connection does not work correctly. This happened right after that I did the partitioning in the D drive (I don't think this is the main cause). What is happening is that, all of a sudden when internet does not bar shows signs of yellow warning and 'tells' LIMITED ACCESS wireless network. When I try to solve problems, it will give no problem. Then in Device Manager, I tried to uninstall and install again, the internet worked for a while, and still the same problem occurs. When I tried to call to the service center, they told me that I have to buy CDs to retrieve a value of rs500 because I did not these recovery disks. I'm in serious trouble please help...

  I also tried to update latest driver frm net, even if the problem does not get resolved. I also tried to reset the TCPIP in cmd prompt, but it worked for 2-3 days and still the same problem happened...

  Hi there @Parthsagar2010

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you are having problems with your wireless connection, and I am happy to help you with this.

  I realize that you mentioned the update of your driver from the internet, but just in case, here is the page drivers. There are several pilots possible depending on what card you have.

  HP Pavilion g6-2014tx Notebook PC - software & drivers

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.

  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

• U940 PSU6VA satellite - wireless connectivity problems

  _ * My specifications: * _
  * Model: * Toshiba Ultrabook (Satellite PSU6VA - 00S 002 U940)
  * Operating system: * Windows 8.1 x 64 (upgrade of Windows 8 x 64)
  * Wireless adapter: * Intel Centrino Wireless - N 2200
  * Wireless adapter driver version: * 15.10.0.12 (which is the last for my device)

  I got this Ultrabook since February 2013, and throughout this period, I always had problems with wireless connectivity, even after a factory reset. My wireless icon varies between three States:
  * Internet access
  * Limited (in which case I can't connect to the internet or any other device on the network)
  * Not connected - connections are available (and if I try to connect to the network, it will fail)

  Sometimes my computer would instantly reach the State of "Internet access" at startup and remain in this State. Other times, it would be 'limited' for several minutes after the start of my computer before it finally connected, and even in this case, the connection will drop out every now and then. In the worst case, it would indefinitely remain "Limited" or "not connected", regardless of how many times I reset my adapter wireless or rebooted my computer.

  Until very recently, I always thought that these problems have occurred randomly. However, I noticed recently that I have always a connection perfect, whenever there is no other computers connected wirelessly to my router, and I always have problems more or less when there is at least another computer (or even a smart phone) connected wireless to the router. If there is another computer connected to the router via an Ethernet cable, this causes no problems. It's only wireless connections that interfere with my computer.

  It is only this computer that has these problems; the other computers in my house ever experience these issues, no matter how many computers is online. In addition, my computer is not only these problems with my home router; It has the same problems on the network wireless at my University.

  My question is, how do I fix? Is this a known bug or is my defective wireless adapter? I know that I can connect using an Ethernet cable if possible (I have never problems with Ethernet connections), but this is not always possible at the University.

  Did you remove the old driver Win 8 Intel of the system before you upgrade to version 8.1 to win?
  The old Wlan Intel driver could affect the performance of a Wi - Fi connection.

  The driver update page Win 8.1 says clearly that Intel Wlan driver must be uninstalled and the
  Inbox Windows 8.1 version must be used.
  http://support.Toshiba-tie.co.jp/windows81/drivers/PSU6V_Up_au.htm

• Satellite L500 - wireless connection is very slow

  Hey all,.

  I have problems with my toshiba satellite L500 wireless very slow. I restored the computer back to factory settings, reset the router and do not know what to do. The only way that I am able to achieve and increase speed of internet is by connecting the laptop to the router.

  There are 3 other laptops in the House which is the same model, this laptop runs very fast. My router is a Thomson TG782T.

  Thank you

  Hello

  First, I would try to update the WLAN driver. Download the latest version on the Toshiba site and then delete the old version. Reboot the laptop and use CCleaner to clean the system. Restart again and now you can install the latest WLAN driver.

  I put t know what operating system you have, but on Vista and Windows 7, you must disable the WLAN energy saving function. You can do this in Windows power management if you change power management.

  I had a similar problem and after removing the energy saving function, it worked fast and normal as on other laptops. :)

• Wireless connection problem - "could not contact the primary DNS server.

  Hello. As of today, I had an interesting problem with my connection wireless home.

  I have DSL, and my router (an Actiontec GT704-WG, for reference), periodically decides to abandon the internet connection throughout the entire family. This includes our parent unit, as well as my lap top which relies on a wireless connection.

  Today, I noticed that my laptop was switched to 'Access Local.' only I went to check my modem, only to find all the lights on the side were, and the computer was working fine. I tried to reset the wireless connection, activating / disabling the wireless and switch off, Plug and reconnect to the network without wire, as well as re-booting my computer. None of these things worked.

  I also received and error message that tells me it: "could not contact the primary DNS (fe80::341b:6831:1247:6707 11%).

  I don't know what this means, although I checked to make sure that my ISP address connects well, and as far as I can tell it is. I also checked everything that Microsoft suggested troubleshooting guides, nothing helps.

  I don't know if that makes a difference, but I noticed to my lap top more close to the router, the connection would come periodically power on and off. Also, these problems started occurring after that I installed and then uninstalled Firefox. I use Internet Explorer, but I wanted to try Firefox.

  Also, my computer is an application of Toshiba Satellite L305-S5944, running Vista Home Basic, I believe.

  I hope I've provided enough information.

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite L30: Watch DVD problem - slowly and the sound is distorted

  Hello!
  I have a Toshiba laptop Satellite L30-115. I use WinDVD preinstalled to watch DVD. everything was fine until yesterday. Since then, my DVD drive seems to have problems with playback of DVD movies (original).

  It's a little slower that should be, and the sound is a bit distorted. The same DVD my laptop no problems to play now, it seems impossible to play properly.

  I tried system recovery to date, everything was good, but that did not help.

  Everything's fine, when I play movies from my hard drive, but apparently my DVD Player cannot play fair.
  I tried various combinations (turn on/off digital playback in Device Manager), but nothing seems to work.

  No idea how to fix?

  First of all, give it a try with cleaning the lens of your DVD player. Several times a lens dirty or CD/DVD that makes impossible to correct read causing delays.
  Because the movies read from the HARD disk correctly, it does not seem to be a related problem of codec, but... you should still try to use other DVD player software to ensure that WinDVD is not the source.

  I suggest you also to keep longer, to install software of reduction of CD speed during normal use of all the days of the life of your drive. As you know, the disc spins a lot faster than actually required inside the car which complicates the procedure for reading (especially on the scratched CD) and consumes more energy, too.

  Reduce speed solves problems like the one you have several times. Here is a link to the Version of acoustic silencer of TOSHIBA 1.00.008 (from page of the pilot satellite L30), give it a try:

  http://support.toshiba-tro.de/tools/satellite/sl30psl33/XP/acoustic-silencer/acsil-PSL33-XP-100008-en.zip
  (This software runs independent you have European/American version of laptop L30, even on a different model as Satellite Pro 6100 a.s.o..)

  Kind regards
  chain

• Satellite U300 - network connection problems

  I have problems with my laptop network adapters. The laptop is not able to connect to the internet with wired or wireless connections. I tried to update the drivers of the cards, but this does not solve the problem.

  In the Manager section of devices under network adapters, all cards have an exclamation yellow next to them and "Device status" is for the cards ' * this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Click "Find solutions to send data about this device to Microsoft and to see if there is a solution available".

  In addition, on reboot the computer, Windows prompts me to install the driver software for * Realtek PCIe FE Family Controller * and * Intel (R) Wireless WiFi Link 4965AGN *. "Whenever I try to install the drivers, it fails and the error message ' * cannot open the specific driver for this device registry key *" appears. I even tried to install the Realtek Vista diagnostic tool and the program fails to run but produces the error message ' * Please install protocol driver *'.

  I tried to restore the system to a date that I remember not having problems but the restoration does not end. I get a message telling me that the restore has failed.

  _Drivers: _ Realtek PCIe FE Family Controller - Version on laptop: 6.227.902.2009 (I think this is the most recent version)
  Intel (r) Wireless WiFi Link 4965AGN - Version on laptop: 12.4.3.9 (current version 13.0.0.107 do not install it)

  Can someone advise me on how I can fix this?

  Hello

  It seems the LAN and WLan driver are not installed properly

  Are you using the right drivers?
  What U300 do you have exactly?

  To my knowledge, the error message is usually for use of non compatible drivers
  Try to install a diagnostic tool of material such as Everest, Avast or Sandra.
  This should help you to get more details on the Wlan and LAN, then you might find the compatible drivers!

• Satellite L30 - 113 memory problem

  I have a Satellite L30-113 that does not have the right
  size of the memory.

  The system was shipped with 512 MB and 1 GB extra, I installed
  Stick, but for some reason any windows reports only 896 MB installed and graphics card
  use 128 MB. The BIOS also pointed out that only 896 MB of ram is installed.

  When I run the system information for windows it only detects 1 GB module
  Although if I remove a memory module and have either 512 MB or 1 GB installed
  It works very well.

  I also installed the latest version of the BIOS and does not seam to
  have had no effect.

  Also the two sticks of memory were tested in another laptop, so I know that both work.

  Are there problems with the mixture of sizes of memory in these laptops or to memory
  Poles should be assorted sizes?

  The operating system is Windows XP Pro

  * Excerpt from system information for windows
  The value of property *.
  * + Memory: + * summary
  + * Place: * + motherboard or motherboard
  * + Maximum capacity: + * 1024 MB
  + * Memory: * + Slots 2
  * + Error Correction +: * No.
  * + Physical name: + * matrix memory
  * + Operating system: + * memory
  * + The device index: + * J501
  + * Capacity: * + 1024 MB
  * + Memory + type: * DRAM
  * + Width of data: + * 64-bit
  * + Bank Label +: * channel B0
  * + Form factor: + * DIMM
  * + Total width: + * 64
  * + Type Detail: + * synchronous

  Thank you very much
  Matt Tyrrell

  I agree with Abe. I noticed a few comments about it in the forum, and it seems that the Satellite L30 should be upgraded with exactly the same modules.
  I mean that the modules must support the same speed (MHz), the same manufacturer and so on

  For me it s clear that other computers are able to manage these modules, but it seems as the can-do that L30!

• g505s 8.1 updates & wireless connection problem

  I just downloaded updates Microsoft last night and as soon as I restarted, my wireless connection was gone/missing/non-functional. I have read some other posts that made me think that the issue may be with the (Qualcomm Atheros AR956x) wireless network adapter driver, but the download or install the latest driver from Lenovo (wlan149w81) support site didn't do me good. I do not see again for a Wi - Fi connection in the center of network & sharing.

  Someone at - he never saw something like this before / know what might be causing the problem?

  Hi solid Cruver - thanks for the help. Looks like that the combo of what I did and what you recommended has done. Update the driver LAN first and second WLAN driver seems to have solved the problem. Thanks again.

• sometimes (iexplorer or firefox mozilla) wireless connection problem question time on XP Home sp3

  I do not have the AOL e-mail account now, I need to change my email address to the account.  It is a question rather long. 1 tech computer. E Machine W3107 desktop PC. AMD Sempron. Processor 3100 + 1.80 GHz, 1600 MHz FSB, 256 KB L2 Cache, 100 GB ATA hard drive, 1.87 GB of memory; (I upgraded the memory to 512 MB DDR SDRAM) 8 in 1 digital memory card reader, 5 USB Ports, nVIDIA GeForce 6100 PCI-Express Slot available, network 10/100 Mbps Ethernet LAN, Windows XP Home sp3 system, I connect to the internet with 6-AX88772 USB2.0 to Fast Ethernet network adapter. Reason do not use Ethernet adapter was because in the taskbar bar, there was a "Network cable unplugged" warning (internet technician did not want or did not know how) to solve the problem. It's easier and faster just to put the adapter ASIX.    My problem is after about 20 minutes. my connection speed is slower than the previous 56K modem. I have to constantly repair the IP address just to stay online when the settings are set to AUTO FIND the IP address, gateway server and DNS servers. If I set these manuely I am always constantly disconnected and it is a repair click without end for the IP address. I can't play POKER in Facebook or Ant other multiplayer game due to the fact that you can't return to your table in FACEBOOK before you are ejected to the lobby, because you've lost the Internet connection. I get disconnected every 2-3 minutes. It's on a regular basis. So sometimes (not often) I stay connected and stay in touch with extremely quick responses. I ran anti-virus, Malware, Spyware scans (no) (clean). I ran Windows tool of connectivity with different results. When Internet Explorer announces that "cannot display this web site" I run the connectivity program and to halfway through the IE analysis opens the web site. ". The newspaper said "it is Impossible to find something wrong with your connection; The icon in the taskbar says I'm connected. Which is not true because sometimes if I download a fike transfer rate will be reduced to "0" (ZERO) at least a minite before he picks up back at a blinding speed of 3-7 Kbps. I started to hate this wireless connection and have seriously thought about back to Dial-up. At least, it was a constant SLOW. and meadows maddness worse. Both browsers then expire too but Mozilla seems to be a browser faster than IE. This happens at the influx of cutting-edge and 03:00 when internet traffic is very light... Little difference, if any. My Email address has changed from AOL. I don't have access to this account anynore. My current address is * address email is removed from the privacy *.

  Hello

  1. don't you make changes to your machine before the problem?
  2. you have any device near your router that may be in conflict with the signal?

  If so, make sure that devices such as radio, microwaves, mobile phones are kept at Bay.

  In the meantime, I wish that you follow the steps mentioned below.

  Method 1:

  Update your AX88772 6 USB2.0 to Fast Ethernet network card of manufacturer's site and see if it helps.

  Method 2:

  You can also test the problem in safe mode with network.

  If the methods above are little help, you may need to contact your Internet Service Provider for the best help that can be also with slow Internet or abandon the connection.

  Let us know the status of the issue.

• LaserJet M277dw: M277dw wireless connection problems

  I just bought this printer 2 days ago and since then have worked so that it can connect to my wireless network.  I didn't realize set up a printer would take over 12 hours and I am very frustrated.  I am a 30 years old, the networking industry veteran and tried different ways to connect this printer for WiFi and all have resulted in the same thing.  The printer connects, authenticates, and gets a DHCP address.  I am able to ping the printer on the wireless for about 2 minutes and then it stops.  The network printer report that everything is good, SSID, Auth method, etc.  The indicator on the printer wireless shows connected with intense beep.  Watch wireless access point the printer active in wireless connections until it pings stop and the device then goes to an idle state, indicating that the printer has stopped sending the Wireless 'KeepAlive '.  At this point, I would say that I have a defective printer, but I've seen several posts on this forum with the same question and no documented fix.  I find it very doubtful that HP has produced many defective printers.  Is there a solution to my problem?  Please advise...

  Time to return the printer for refund or Exchange.