Satellite L300 - how to install Recovery discs purchased?

I bought recovery disks for my laptop.
I got 2 drives Toshiba. Article R10249DU on the two number.

Started on disc 1 and installed. No problem.

However, when should I use disc 2? I was not invited to use it.

Disc 2 contains about 9 concerts on 12 files (.swm x 9 files, 2 x .crc, 1 x data.ini files).

Any suggestions appreciated

JW

Hello

I don t know why you have two drives, but if the installation from the first disc went well, so everything should be ok, and you should be able to start Notepad and should be able to complete the installation of Vista.

You have completed the installation of Vista successfully?

Tags: Toshiba

Similar Questions

  • Satellite L300 - how to install the webcam software?

    I have a Satellite L300 with an internal webcam. Recently I had to install a new HARD drive. I didn't have a recovery disc, so I just installed Vista on it.

    Is there a way I can install the webcam software?

    Hello

    I also have Satellite L300 and you can download the software of the webcam from the Toshiba page directly. Just follow this link and clicks:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Everything you need you will find! ;)

  • Satellite Pro A120 - cannot install recovery disc

    Hi - I have a Toshiba Satellite Pro A120 PSAC1E-04H00VEN model number

    It was less his hard drive and I posted previously to try a 160 GB drive without success. I thought that the drive may be defective, so I have now acquired a 120 GB drive. It is not new, but assured me that it works. However, it does not work in this laptop! As before (with the disk 160), when I try to install it using the Toshiba restore disc, the operation just sticks on the "Please wait..." message. "for 30 minutes then the machine shuts down. Assuming that the hard drive is ok there at - it something more, that I can do to determine the problem with this laptop?

    FYI, this is what happens after installing the hard drive:
    I turn it on and get this message: NTLDR is missing. Press Ctrl + Alt + Delete to restart.
    I insert the product recovery disc, put off and then again when you press F12.
    I get a soft Purring over the Toshiba logo. I select the CD/DVD symbol and get a short message saying: the installer inspects the hardware configuration of your computer.
    I then get RAMDISK image loading... which takes less than 2 minutes.
    I then get a short message saying: from Windows Preinstallation Environment. Press F6 if you need to install a third-party RAID or SCSI driver...
    I then get it please wait... and after 10 seconds, the fan goes into overdrive! This Carry on during 30 minutes with him please wait... message, then the laptop turns off automatically.

    Any ideas anyone?

    Thank you.

    Hi Lapitup,

    Before you buy another HARD drive, you need to test a different installation disk you have already tried the two hard disks with the same problem so I think that the problem is not HARD drive itself

    If you have a normal installation disc of Windows, you can install Windows on this drive. So you can check if the recovery disk works properly or not. Theoretically, the disc could be wiped off so that the files cannot be read properly.

    In the worst cases, some of the material is affected. Then, you need professional help of an authorized service provider.

  • Satellite L300 - how to install Ethernet controller?

    Hi all

    The other day I was cleaning up my computer (just uninstall unused and games programs and other things) and I accidentally uninstalled my ethernet controller.

    I restarted my computer and it came with a box saying install ethernet controller. So I click on this button and it said to put in the disc that came with the computer, but I do not have a disk, and so I clicked on another option that says "use another option to install this" so I clicked it, but then he said you must be connected to the internet. which is all just stupid because I can't connect because no ethernet controller not... So! My question is: what can I do to install it again, or whatever. I'm not that smart computer, as I don't know anything about any electronics inside the screen or something, I'm on of those people who knows how to change the wallpaper and installing a game, but that's all.

    Can I get a disk to the message box says to Toshiba? or perhaps a local store like Ricahrd Smith (Actaully his Di * ck smith, he said I can't have the complete word apparently his rough. haha) or something?

    Please help me. I am writing from an Internet café and I really don't like this part of town... lol. I'd rather be in the comfort of my own home and being on the internet there.

    Thanks for any help you can provide.

    Hello!

    To me it sounds like that, you have also uninstalled the driver of Ethernet controller and so after reboot, the message appears that you will install the Ethernet controller.

    However, you can download all the drivers for your laptop on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Maybe you can download the driver in the internet cafe or a friend who has the internet connection.

    More the laptop is not delivered with a recovery disk because you have to create this disc by yourself. If you start the Toshiba recovery disc creator you can create the recovery disk that contains an image of the factory settings. You can boot from that disk but it erase your entire HARD drive so always backup the files on the HARD disk before using it. It of pretty easy to use and only takes a few minutes.
    If you would like more information on the recovery disk, please consult your user manual!

    Good bye

  • Re: Satellite L300-1BV - create your recovery disc ISO images

    I wondered about this.
    Could make my recovery disc ISO images, I know I could just make a few extra copies, but I am learning to create ISO images.
    But I was a little worried about what would happen when I put a disc in the drive...

    This along with the recovery image is a bit complicated, and something like this is not possible.
    All you can do is create recovery DVDs using Toshiba recovery disc creator or directly start the HARD drive recovery using recovery Toshiba (F8) option.

    You can do with it what you want but how you want to start the installation later?
    Sorry, but I think that it will not work.

  • How to install Recovery on my Satellite L655-121 image?

    I have labtop to a Toshiba SATELLITE L655-121,

    I did a restore to get rid of the problems that I have encountered in Windows 8 beta, but the recovery has not filled :(

    Now I can't fix or redo the recovery! I had him!

    I can't use HARD drive recovery that was present on "pilot! and I don't have the CD on which the copy is present, I have just the serial number :D

    Widows is "7 Home Premium OA.

    The laptop is useless now, what should I do? If I downloaded this Microsoft Windows and used the S.N I, if it works correctly?

    >... but the recovery did not complete
    How to understand this?
    > if I downloaded this Microsoft Windows and used the S.N I, if it works correctly?
    N ° serial number has nothing to do with the recovery image.

    If you want to have the original Toshiba installed on your laptop recovery image you must order the Toshiba recovery disc - https://backupmedia.toshiba.eu/landing.aspx

    Another option is to install the clean version of the OS and later install all necessary drivers, tools and utilities more. Each of them you can find and download from Toshiba support page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  • Satellite L300 - how to use and install Bluetooth?

    Hello world.

    I would like to know how can use bluetooth and how to install it on my:
    Satellite L300-204 SYSTEM UNIT
    model No.: PSLB8E - 06100ES4

    It is necessary to transfer pictures from my samsung mobile phone

    TKS a lot.
    Kind regards.

    Ornella

    Hello

    This model of laptop doesn't support BT (bluetooth).
    There is no BT module and so you will not be able to activate and to connect a mobile phone using the BT connection.

    The fastest solution would be if external use BT USB dongle.
    This dongle is not expensive!

  • Satellite L300-13 s - USB recovery instead of recovery DVD discs?

    Hello

    Well, for the first time in 8 years I had to do a system recovery using the disks that I created when I bought my l300-13s using the Toshiba Recovery Disk Creator.
    I had inadvertently deleted the HARD drive recovery partition when I decided to make a clone with a larger HARD drive.

    What I want to know is instead of making recovery discs DVD can only do a USB key recovery?

    Thank you

    Peter.

    When you open Toshiba Recovery Media Creator you can see media options that can be created. I m not 100% sure, but I think that the old L300 there was possibility of recovery DVD only so I think that you cannot create USB recovery.

  • Since another laptop Toshiba Satellite L300 - can I use Recovery CD?

    Hello

    I can't get a computer to load Vista (Equium l300 (I think).
    Ubuntu loads very well (I have a linux partition 8 GB, with GRUB installed in a separate partition), but when I try to load vista I get "to go". "and nothing happens.

    I tried HDDRecovery by pressing '0' or 'F8', but this gave me a check disk for errors and nothing more.
    I always have a backup of HARD drive recovery in another partition, but I know not where to place them, can you tell me where?

    Then I discovered that I have a wife satellite toshiba recovery disc.

    I can use it to recover the satellite or it will remove a real installation of Vista, put a 'pirate' new copy in its place?
    If I can't do that, can someone tell me where to place the folder HDDRecovery image?

    In General, Toshiba create materials recovery and images of recovery for each laptop model separately.
    Each laptop model has different hardware and recovery images are not the same.
    Before the start of recovery it will be checked if the recovery image belongs to some portable computers. If the identification is not just installation of recovery is interrupted.

    One last thing. If you have changed the structure of the partitions or installed some other OS, you will not be able to use the recovery saved on the HARD disk image.
    It is bad enough that you have ignored the reminder of recovery with clear instructions on creating recovery DVDs.

    Here is the original post:
    Important INFORMATION

    your system is equipped with a hard drive recovery system. If you need to repair
    your computer in the restaurant to original factory State, you can do it directly
    hard disk (press F8 when you start your computer, choose "Repair your computer"
    and follow the instructions in the menu) or create a media drive bootable recovery for this purpose.

    Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator"
    to ensure that you are able to restore your computer to the original factory, installed state
    even if your computer is seriously damaged.

  • Satellite L300 - how do I restore factory settings?

    Hi all

    I bought laptop Toshiba L300-19F with Windows Vista.

    I did not the backup CD for reinstallation of the operating system

    Can someone tell me how Ii reinstall my OS even when I bought it?

    Thanks in advance

    Salim

    Did you check the manual of your laptop?
    You will find all the information about to reinstall your laptop or you get back to factory settings. Also you can find here a large number of discussions on this subject so you should only use the search function.

    But if you have Vista on your laptop computer you can restore the factory settings if you use HARD drive recovery or you create the recovery disk. For HARD drive recovery works you should only go into the advanced boot menu by pressing F8, select Repair my computer and follow the instructions on the screen.
    With drive recovery it s similar: just boot from the floppy disk and follow the instructions on the screen.

    In addition, you should this information since the recall of recovery:
    + Important INFORMATION +.

    + your system is equipped with a hard drive recovery system. If you need repair.
    + your computer in the restaurant to original factory State, you can do it directly.
    + HDD (press F8 when you start your computer, choose "Repair your computer" +)
    + and follow the instructions in the menu) or create a media drive bootable recovery to that end. +.

    + Toshiba recommends you create recovery disk medium uses the "Toshiba Recovery Disc Creator' to ensure the +.
    + Hat you are able to restore your computer to the State of origin, installed at the factory, even if your computer +.
    + Gets severely damaged.

  • Satellite P300 - - what are product recovery discs contains Vista?

    I want to reformat my laptop, it's a Satellite P300... many things does not work more IE: System Restore and corrupt c drive

    (1) would be to reformat my laptop to fix those problems?

    (2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and 64-bit windows vista ulimate said.

    Is that mean they contain vista? (vista came pre installed

    (3) should I make a copy of the PRODUCT ID series vista on my system menu screen

    (4) how would these discs...

    I you thankful if you could help, its a super computer

    Conduct research on how to operate the discs, just want to make sure that they contain vista

    > 1) would be reformatting my laptop fix these problems?
    Probably yes

    (> 2) 2 discs "TOSHIBA satellite p300 etc. product recovery media and said windows vista ultimate 64-bit.
    As far as I know that P300 was equipped with HARD drive recovery and Vista 32 bit was preinstalled. There should be an option that allows to recover the laptop using the recovery of HARD drive option. Press F8 when the laptop starts up. Then choose fix my computer and start HARD drive recovery.
    This should set the machine to factory settings. Finally, you can create a recovery disk using the Toshiba recovery disc Creator called preinstalled software.

    (> 3) should I make a copy of the PRODUCT ID series vista on my system menu screen
    You can do this, but as far as I know the Vista on the Toshiba Recovery disk is already enabled and you don t need the series keys.

    (> 4) how would these discs...
    Usually you have to boot from that disk

    PS; For more details you should read the user manual and must read the discussions in this forum!

  • Satellite A300: TRDC reminder & Toshiba Recovery Disc Creator works after upgrade to Windows 7?

    Hello

    I'm sorry for the bad English.
    Satellite A300.
    Has performed the update to Win7 upgrade Toshiba program.

    This program works;
    TRDC reminder and Toshiba Recovery Disc Creator after update to Wins7?

    The TRDCReminder program found no "revival of the computer.
    Toshiba Recovery Disc Creator program was created and incomprehensible?

    If what these program how to recover your computer in case of failure?
    TEMPRO works in Win7?

    Thank you very much.
    With greetings.

    Igor.

    Hello Igor

    In my opinion, you must create recovery disk before upgrade you to Win7. I did the same thing.
    Later, if something goes wrong, you can use your disks and install Vista using the created recovery disks.

    I don't understand why you want to wait and create these disks after upgrade. This recovery creator disc doesn t create recovery image in the current state, but always the same recovery image, you got with your laptop.

    TEMPRO should work in Win7 too.

  • Satellite L300, how to start from the cd/dvd external USB drive?

    I have an old laptop Satellite L300, latest version of the BIOS (2.20) installed.
    I would like to start on a connected external USB CD/DVD player
    PROBLEM:
    BIOS will not start on this CD/DVD disc.
    In the BIOS boot priority is: CD/DVD, USB, HDD
    BEHAVIOR:
    When starting, computer ignores the CD/DVD, ignores the USB and start on the HARD drive.
    QUESTION:
    Is it possible at all boot for CD/DVD USB external?

    Thanks for the efforts made to respond.
    Concerning

    It is NOT possible, I thought. REASON: The BIOS does not, does not reckognize CD/DVD (does not test if code such USB-CD/DVD bootable) drive connected via USB.

  • Satellite L300 - how to save on the E: drive?

    Hello

    My sister seems to have problems with his hard drive, he said that it is almost full (vista drive (c :))) a message keeps coming up)
    I was wondering just how she can start using the E: drive. Is it possible to change the settings on the computer so that everything is saved on disk E
    I don't know much about computers but would really help

    It is Toshiba Satellite L300 and Windows Vista 32 bit

    Thanks maz

    Hey Buddy,

    You can use drive E all the time... ;-)

    The point is that most programs will be installed on the C drive, so you should choose drive E, if you want to install.

    In my opinion the best option is if you save all important files and private on second drive E. I mean these files like photos, videos, music, documents, etc. He just copy and post it on the E drive, everything that s! :)

  • Satellite P10 - repair on the recovery disc option

    My Satellite P10 crashed, which suggests an error of hard disk may be imminent, I have a recovery disk, but it doesn't have a repair option, only a full recovery. As I would like to try to retrieve some data, is there a repair option, normally associated with these discs.
    If yes where can I get one?

    Thank you

    Recovery disc has no repair option. Recovery disk contains only the recovery image. Try to get the facilities of Microsoft CD and use the fix here. If you will not be able to repair the operating system pre-installed as a last option, you can use the recovery disk and install recovery image.

    Bye and good luck!

Maybe you are looking for