Satellite L300D-12U no wireless connection and without hardware

Similar Questions

• Satellite L300D-12u: power supply works not - is threre a guarantee?

  Hello.

  Today, I was surfing the Internet when suddenly my laptop says, is no longer on electricity.
  I touched the power supply and the connector that is immersed in the laptop was very hot (not the big case which becomes usually hot, only the connector).

  I tried several times to make it work again to take a new start or cool connector, but it still does not work.

  To make sure, that it is the question of food, I used the power supply of my mother, who is similar to mine, and then it worked.

  So my question: do I have a warranty on my power supply?
  I bought my laptop to 29.8.2008 in Germany and is a Satellite L300D - 12u.

  Thank you for all the answers!

  Hello

  Adapter is covered by warranty for laptop.
  So if laptops warranty is still valid your adapter should be covered by the warranty as well.

  Visit this link for details of the guarantee:

  http://www.toshiba-tro.de/unitdetails

  Welcome them

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• No Wireless Connection and can not only change the router

  I have messed around with my router configuration to try to make my NAt type open and somehow messed up the Internet. I set kind of it and now I can connect to the internet if I connect directly to the router but I can't always have a wireless connection and I also can't change the router setting more? I followed the steps back to get my ip address and it used to be 192.168.1.1, but now his 192.168.1.2 I don't know what I please help.

  Hi estesblake,

  (1) do you get an error message when you try to access wireless internet?

  (2) what is the number of brand and model of your router?

  Follow the steps outlined in the article below to fix the problem of wireless network connection

  Wireless network connection problems in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab02

  Regarding router problem check the documentation that came with the device or contact the manufacturer of the device.

• Satellite L300D-10U - unable to connect to the internet using LAN and Win XP

  Hi all

  I had a very big problem with my card.
  I can t connect to the internet.
  I searched the forum but without any determination :(

  I did everything. I have checked ipconfig nothing, check the mode safe mode with local network nothing.
  Someone said too
  "(1) once the Ethernet is connected, power of the DSL Modem. Cycle." ("Some Modem picks up the MAC ADDRESS of the network card on where it was previously connected and restarting it redétecte this new")

  How to disable the modem?
  And another question: can someone tell me what works of LAN drivers in Sat L300D-10U on XP?
  I put t even know that :(

  Help me

  Hello

  The Satellite L300D-10U belongs to the series of PSLC0E and it supports the Realtek LAN card.
  LAN driver can be found on the page of Realtek.

  You ask how to disable the modem? I think you mean how to reset modem DSL
  Well, usually your modem should support an ON / OFF button simply turn it off and then turn it back on.

  If you are unable to access the internet then you should first check if your modem is properly configured and that the right data ISP (internet service provider) was used.

  Sorry, but that's all I can say right now I think you should just check your modem settings, make sure that the NIC is properly recognized and connect the model of the laptop using a LAN cable.

  All that s

• Satellite M30-107 - guard wireless disconnect and never connects

  My Toshiba Satellite M30-107 with Intel (r) PRO/Wireless 2200BG Network connection is not connect wirelessly. I know that there is no hardware problem, because I used this laptop to different wireless networks in the past, and just recently I formatted my laptop using the recovery disk Toshiba gave with it.

  I set up the wireless entering the SSID and network key. But the wireless connects with the Excellent signal is only for a second and then disconnects, then reconnects, disconnects. After doing this for a while, it remains offline.

  How can I do to connect and stay connected as it should?

  It is not easy to say why all this happens. I also think that your laptop works well, then maybe you should check the router. Reboot the router and check the WLAN connection again.

  For a moment turn off WLAN protection and check if the same problem happens without entering the network key.
  Setting router to run on 802. 11 b / g only and check again.

  Play with these settings. Have you bought a new router? I mean if everything was OK in the past I m wondering why you are facing this problem now.

• Re: Satellite Pro A300-1EA - wireless connection, drop all the time

  Hi, I have a problem with my wireless connection fall all the time on my Satellite Pro A300 1EA.

  It happened earlier, but I've fiddled about a little with change of drivers and the removal of the connection settings for the registry and it then worked fine for months, until yesterday.

  There were several updates for Windows installed yesterday, but none of them have been updated driver for the wireless card, and they don't look like they should cause problems. The fact that the problem happened before makes me think that the updates can be anything to do with it.

  I use the * Intel PRO/Wireless 3945/4965/5100/5300 * for Vista 32 - bit version 12.2.0.11.3 drivers from the Toshiba download page.

  Other computers on the same access point have no problem, so I think it is specific to this laptop. The connection speed is normally 6 Mbps, but I cannot even check e-mail now without the abandonment of the connection.

  Laptop will be thrown against a wall soon if no one can help you.

  Thanks in advance.

  Edit: I've already made sure power settings are at maximum to the WLAN card, even if on battery, or what power management.

  Post edited by: mjbcrawf

  Hello

  Have you tried to use the Windows System Restore feature? After that your WLAN should work fine again.

  In addition, I can recommend the latest WLAN driver in the Intel page, it s version 12.4.xxxx. I installed the driver on my Qosmio laptop and don t have any problems with it: [www.intel.com].

  If you have any other questions, please let us know!

• Satellite P10 873 LAN wireless connection

  Hi all

  I have a laptop Satellite P10 873. I just bought a Netgear DG834GT wireless modem/router and can not get completely connected to the internet via Tiscali (ISP).
  The problem manifests itself in what I can connect to the router and can even ping various sites on the net. But trying to connect to a site using MSIE I just get "unable to connect" rejection page
  In addition, using the CMD prompt, tempting a Telnet session to a web site on port 80 is rejected for example "80 www.bt.com.
  I put all the securities to a minimum without effect.
  I have another laptop that connects and works perfectly with the Netgear/Ticali Installer. I also identically configured MSIE on both machines without success.

  Anyone has any ideas what could be the cause?

  Thanks Mike

  [Edited by: admin October 14 05 11:49]

  Hello

  Well, do you have Devil WLan configurations?
  If you use the Windows settings you must activate it in the WLAN properties and if you are using a customer this option should be disabled.
  Also, check if the windows firewall is disabled. This option please the good state of market for the wireless card
  Sorry, I put t have other ideas.

  Good bye

• Re: Satellite L670 loses the wireless connection

  Hello

  I have a Satellite L670 - 1 H 1, a new laptop that runs Windows 7, with all the drivers and software uptodate, including the wireless card.

  I have a BT Home Hub 3 with an Edimax EW 7416APN v2 300 m range extender to help boost the signal in the kitchen area.

  The laptop works fine when I stay in the room where the reception centre. If I move in the kitchen the laptop will usually lose the wireless connection after a few minutes and I cannot get it back unless I turn the LAPTOP works and return to the Home Hub.

  I see no obvious reason to this problem. Two other laptop computers used in the home, more a smartphone stay connected with full signal in every corner of the House, at any time.

  I have to use the range extender, but is it possible that the laptop Toshiba just don't hear well with it?

  Any advice would be welcome.

  Thank you
  Canton

  Hello Canton

  As you know quality of connection WLAN depends on different factors is not easy to say why you have this problem, WLAN. I use Toshiba laptops for a long time now and I didn't notice in the past some serious question of WLAN.
  For example I'm 4 router with standard g and have very good signal even in the cellar too or out in the back yard.

  If possible, try to test the WLAN connection elsewhere. Maybe your friends have WLAN routers so you can test it.

  You have a new router or old?
  What WLAN standard do you use (b/g/n)?

• Satellite L350 loses the wireless connection

  Can someone please help?

  I have a Satellite L350-170 which perfectly connects to the internet using a cable to connect to my router.
  When you use the wireless to connect, I can only get a connection so I first of all turn off the wireless card and then enable it again, but I lose the connection within two minutes. I can reconnect if again, I turn off and then turn on the map.

  The OS is Vista Home Premium Service Pack 2, fully implemented to date. I have updated to the most recent available wireless network driver. I tried to turn off IP6.
  The laptop is connected to the network and receives a signal of power when it connects.
  When the connection is lost, no networks are detected, but properties card says card works Ok, although Ipconfig says media disconnected. Other mobile stay connected anywhere in the House.

  Thank you in anticipation of a quick solution.

  Where did you download the latest driver for the Realtek 802.11 g (RTL8187B) wireless network card?

  This is the WLan from Toshiba portal, where you can find the latest version of the driver:
  http://APS2.toshiba-tro.de/WLAN/

  I recommend also to renew the IP address if this problem would occur.
  Cmd execute command: ipconfig / renew
  This should help to assign the new ip address

  By the way: in the Device Manager-> Wlan card-> properties-> power management, you can uncheck the mark option which disables the card in order to save energy.

  Have you tested the WiFi with open (unsecured) WiFi connection?

• Satellite P10 554 LAN wireless connection

  Hello people,

  I have a laptop Satellite P10 554. I'm not able to get the wireless LAN. I have a Netgear wireless modem and a Netgear USB wireless "receiver". I have configured the entire setup and switched 'on' switch wireless on the left side of the laptop. Nothing happened. The light on the left side on the laptop that shows the availability of the wireless network never radiated.

  I have installed and inserted into the mobile network.

  Please advise on how should I proceed to get the wireless LAN working.

  Thank you in advance.
  Matel

  Hello

  As far as I know that the Wireless LAN is optional on this unit. This means that the appliance has been delivered without wireless card, but it s can put the card in the laptop.
  Are you sure that your device has a wireless card? You can check in the Device Manager. In addition, must be on the wireless network by using the switch on the side of the laptop and the key combination FN + F8.

  Please check these options.

  Good bye

• Satellite L300D PSLC0E - unable to connect to the TV

  I have a problem with my laptop or TV. I have a model number Toshiba Satellite L300D - pslc0e-017017en.
  I try to use a cable VGA to a Samsung TV, but its does not work.

  I try FN + F5 and nothing is displayed. Is this a common problem, I 2 need to install something?
  Help, please.

  Hello

  The question is what cable did you use and how connect you to the TV and if you chose the right channel of the TV!

  As far as I know this laptop supports the port ONLY VGA (RGB). Using this port, you can only transmit analog video signal.

  For example; You cannot connect VGA/DVI. This will not work!
  If you want to connect the external monitor will let you must use the VGA cable and connect the two devices with a VGA cable.

  By the way; It is very important that you would use the Toshiba certified graphics driver!

• Satellite T110-121 - slow wireless connectivity

  Hi there, hope someone can help me.

  I just bought a Toshiba Satellite [T110-121 | http://uk.computers.toshiba-europe.com/innovation/product/Satellite-T110-121/1080681/toshibaShop/false/] laptop and it's absolutely great in every way, but it connects to my router wireless less than 512 Kbps.

  I have an another Toshiba laptop, I am about to sell ([U30013U | http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=UK&com.broadvis ion.session.new = Yes & PRODUCT_ID = 137279]) and the wireless speed is normally around 15mbps. All other laptops that were already connected to my wireless router are normally not less than 15mbps.

  The T110-121 is super fast when it is connected through ethernet, therefore, the problem lies only in the part things wireless.
  My router is a netgear dg834g, and I'm on DSL of the Virgin.

  The only major difference between my two laptops from Toshiba is the new are listed as being supported network: 802.11b/g/n connectivity and my oldest with the connection the faster is listed as: a/b/g. This would make much difference?

  I should also add that I removed all potentially problematic pre-installed software, such as Mcafee and I use Avast.

  Any help would be appreciated.

  Thank you.

  Hello

  There is a difference between simple standards of WLan 802.11 A, B, G or N.
  If your router supports 802.11 G or N then I would recommend choosing 802.11 N Router and the settings of the Wlan because the 802.11 standard card standard is the fastest and the most recent.

  Please check if the wireless network card is configured properly. You can do this in-Wlan card-> Advanced tab > Device Manager.
  You could improve also the unique parameters and performance of WLan.

  Last but not least, please check the Windows 7 power management because the WLan performance might be decreased in for safe battery power.

  An update of the WLan driver should be judged as well.
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• Satellite Pro 2100 - no wireless connection

  I have just acquired a Satellite Pro 2100, thin machine, but I installed a wireless 802.11 card Belkin g and he said he joined my wireless network and I can actually connect to the internet, but he refuses to see the other machines on my network or be seen.

  Any suggestions gratefully received.

  [Edited by: admin November 20 05 15:55]

  Hello

  As far as I know that you don't see other units on this path. You can see the other wireless units if you use some additional software like ConfigFree (latest version). On this way, you can communicate with other units (chat or Exchange different files).

  Perhaps another third party software can be useful for you.

  Good bye

• Satellite L300D-12U I take the battery out of it?

  Hello

  I have a question.

  I bought the toshiba Satellite L300-12U a long time ago and I've always used the adapter, even if the battery was still in it. But I heard that it is best to take it out, when you use the adapter. But if I get out the acuumulator if it, the place where the battery belongs to, would be open and the port could be damaged, right? And where should I put the acuumulator?
  In the refrigerator? Or is it a dark, cool and dry enough?

  Greetings, jinx
  BTW, sry because of errors, my English is bad :)

  Hello

  It of not necessary to remove the battery while the laptop is connected to the power adapter.
  New age batteries should not be affected.

  But I think that the information in the user manual.
  Check it simply and read how to handle the laptop.

  Welcome and good luck