Satellite L350-171 - network printer installation

Similar Questions

• Satellite L350-171 - where to get the DVD to upgrade Toshiba (Vista to W7)

  Hello world

  I have a Satellite L350-171 and got a W7 DVD update "awhile." I get only round to install now and the first thing I see in the instructions, it's that I should have a upgrade DVD Toshiba, which I did :-(

  Anyone know where I can get one, or if I need any? If not then can I just upgrade and hope that all drivers updated automatically? Sounds a bit risky

  I hope this is the right place to ask.
  If it isn't then point me in the right direction and I'll ask here rather :-)

  Thanks in advance for any help

  Damian

  A few years ago, Toshiba offered this upgrade program.
  It's over and you can't upgrade drive more.

  What you can do is be upgraded using the original disc of Microsoft, but I think you should do clean install Win7. Your model of laptop is supported for Win7 and all necessary drivers, tools and utilities that you can download at Toshiba support page http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Before starting with the upgrade Win7 create original Vista recovery DVDs.
  If you need assistance with installing Win7 or if you have other questions, you are welcome.

• Satellite L350-171 not available in the United Kingdom

  Hello again!

  Does anyone know why the stock of L350-171 is all this?
  I'm trying to get a replacement from Tesco for mine failed, but Tesco do not know when they will receive the stock.

  Also tried to look away, online sales in the United Kingdom and they all show the laptop as out of stock. I hope that this is not an abandoned product! I tried to call customer service to ask Toshiba but abandoned after 15 minutes on hold: (.)

  Get very itchy to pay for a new gadget but do not record/play with it!

  Thank you

  Hello

  I put t believe this laptop model could be interrupted at the moment.
  The L350 is one of the new series of Sam at the moment and maybe this is the reason why the Satellite L350-171 is not yet available

  Maybe you should wait a bit.

  Welcome them

• Satellite L350-171 dead after 2 weeks

  Hi all

  I bought a Satellite L350-171 2 weeks of Tesco Direct. Went to the Toshiba brand because of rumors of reliability. A few days before, the computer could not turn on. Tried unplugging the charger/etc, but no joy. Called Support technique of Toshiba who said it looks like a hardware failure. No lights on the front - normally a yellow light indicates when the charger is connected. The charger is off 19V so I'm sure that's not the issue.

  The last thing that happened was a Windows update that requires a restart, but there is no way a software problem will result in the hardware failure.

  Toshiba suggested I ask Tesco for a replacement as it is less than 28 days old (which I did!). My questions are:

  (1) what type of hardware failure can cause the cell go dead without showing any sign of death?
  (2) the Satellite L350 series there the problems known - this happen with my replacement?
  (3) I am wrong to believe in the reliability of Toshiba?
  (4) anyone suggest some things I can try to bring back to life?

  Thank you

  I'm sorry to hear you have such a problem with your laptop. my brother has had similar problem and ASP has set in only 5 days. Now he's happy again with its A300 Satellite again.

  (1) what's happening with your laptop? It is not easy to say what was wrong there and we can only speculate on this but I think that the ESF may be responsible for this. Faulty electronic board I assume.
  (2) this can happen with all computer laptop and we cannot say that this can happen on Satellite L350 only. If you want you can check out this forum and see what write other people on L350.
  (3) this problem can happen with 1,000 other products too. If you buy a Ferrari and gearbox is defective after only 100 km would you buy Ferrari again? I think you're going to do this. ;)
  (4) according to me, there is nothing you can do. Try to get the replacement.

  Good luck!

• My Satellite L350-171 gets very hot

  My Satellite L350-171 gets very hot and then stops spontaneously. When I pass it back on I can get the message that he has not closed properly and I want to boot into SafeMode etc.

  Does anyone else have this problem / solution?

  Solution?
  This isn't the latest model cell phone, so I assume it's pretty full of dust that blocked cooling grill and the cooling fan. In my opinion, you should clean it up to cooling system of free brand of SCT. After this laptop will be able to take a new breath and material can be cooled correctly.

  How to do this? On the internet you can find many pages and short films how to do this using compressed air. Google around a bit.

  Second option is professional cleaning. In this laptop case will be disassembled and cleaned cooling system. Of course, it is the best solution but must be done by authorized personnel only. Contact the nearest Toshiba service provider and ask how much it costs. It is perhaps not so expensive.

• Network printer installation problem

  In safe mode, delete the printer and spool driver files. To do so, start Microsoft Windows Explorer, and then delete all files and folders in the following two folders (where C: is the drive where you installed Windows XP):

  • C:\Windows\System32\Spool\Printers
  • C:\Windows\System32\Spool\Drivers\w32x86
  Back to top

  Then, edit the registry warning serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk. All first, remove Windows NT subkeys remove registry entries can be problematic for the Windows NT x 86 service subkeys. They may have been installed by the installation programs third-party printer and can interfere with the service of spooling print. Use the following steps to keep the drivers, print spools, and registry entries that came with Windows on your computer and remove all others who may ask questions.

  1. Start the registry editor. To do this, click Start, click run, type regedit in the Open box, and then clickOK.
  2. Locate and expand the following registry key:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x 86

     View the list of subkeys (subfolders). There should only be the following subkeys:

     • Drivers
     • Print processors
  3. If there are any subkeys other than the subkeys listed in step 2, follow these steps:
     1. On the file menu, click export.
     2. In the file name box, type the name you want to use for this key, the asWindowsNTx86regkey, and then click Save.

        Note You can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x 86 registry key to restore the key if you experience problems after you complete this procedure.

     3. Delete all the subkeys other than the subkeys listed in step 2. To do this, right-click each subkey is not on the list, and then clickRemove. Click Yes when you are prompted to confirm the deletion.

  Then, remove the registry entries to remove the printer drivers the potentially problematic printer driver subkeys, which may interfere with the printer you want to use. These may have been installed by the installation programs third-party printer. Use the following steps to keep the printer driver and registry entries provided with Windows on your computer and remove all others who may ask questions.

  1. Start the registry editor if it is not open. To do this, click Start, clickrun, type regedit in the Open box, and then clickOK.
  2. Search for, and then expand the following registry key:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers

     The registry entries for the printer drivers installed on the computer are stored in theVersion - x subkey or subkeys, where x is a number (typically 2 or 3).

  3. Export the Version - x subkey or subkeys. To do this, follow these steps:
     1. On the file menu, click export.
     2. In the file name box, type the name you want to use for this key, such asprint driver, and then click Save.
  4. Expand the Version - x subkey or subkeys and delete the printer driver entries. To do this, right-click each printer driver subkey, and then clickRemove. Click Yes when you are prompted to confirm the deletion.

  Thirdly, remove the registry entries for the default print monitors remove the potentially problematic print monitor subkeys, which may interfere with the printer you want to use. These may have been installed by the installation programs third-party printer. Follow these steps to keep the print monitors and comes with Windows registry entries and remove all others who may ask questions.

  1. Start the registry editor if it is not open. To do this, click Start, clickrun, type regedit in the Open box, and then clickOK.
  2. Search for, and then expand the following registry key:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors

     View the list of subkeys. It should only be the following subkeys for the default print monitors:

     • BJ language monitor
     • The local port
     • PJL language monitor
     • Standard TCP/IP port
     • USB Monitor
  3. If there are any subkeys other than the subkeys listed in step 1, do the following:
     1. On the file menu, click export.
     2. In the file name box, type the name you want to use for this key, the asMonitorsRegkey, and then click Save.

        Note You can use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key if you experience problems after you complete this procedure.

     3. Delete all the subkeys other than the subkeys listed in step 2. To do this, right-click each subkey is not on the list, and then clickRemove. Click Yes when you are prompted to confirm the deletion.
  4. Exit Registry Editor.
  5. If you have a printer connected to the computer, disconnect the printer from the computer and restart the computer.
  Back to top

  Now, verify that the print spooler service is running to verify that the print spooler service is running. To do this, follow these steps:

  1. Click Startand then right-click my computerand clickManage.
  2. Expand Services and Applicationsand then click Services.
  3. In the Details pane, right-click the print spooler service, and then click Start (if it is stopped).
  4. Output of computer management.

  If you cannot start the print spooler service, follow the steps in the following article in the Microsoft Knowledge Base to start the print spooler service:

  919750 (http://support.microsoft.com/kb/919750/) you experience problems printing, display the printer icons and adding printers, the print service spooler does not work correctly, and you receive error messages related to printing on a Windows XP-based computer
  Back to top

  Finally, add a printer and print a test page if you have a printer is connected, reconnect the printer cable to the computer, install the printer by adding it to the computer through the Add Printer Wizard and then try to print a test page. To install the printer of your choice, follow these steps:

  1. Click Startand then click Printers and faxes.
  2. Click Add a printer. The Add Printer Wizard starts.
  3. Follow the instructions in the Add Printer Wizard to install the printer you want.
  4. Print a test page to make sure that you can print.

  If you can't always print or if you still receive errors of spool printing, go to the section "This corrects the problem? After above steps, I can't configure my printer via the network and after complete installation, an errormsg shpwing ' operation could not complete "and ask for the installation program."

  The portable operating system is windows XP SP3.

  Any body can help me to solve the problem.

  Hi Scott,.

  • What exactly happens when you try to install the network printer?
  • You receive an error message?
  • What is the network printer connected via an Ethernet or wireless?

  However, you can access the link below and follow the steps in the article to install the network printer and check if it helps.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/print_connect_net_printerw.mspx?mfr=true

  You can also use the printer Troubleshooter in Windows XP and check if it helps. Access the link below and follow the steps to run the Printing Troubleshooter in Windows XP.

  http://support.Microsoft.com/kb/308028

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Network printer installs and shows also ready to print but does not print.

  I tried these last days get my network printer after getting a new laptop from work. I have the printer connected to my desktop running vista 32 home, my laptop running windows 7 Home premium 64-bit. I can detect the printer when you add a network printer, very well, I installed without error, the printer indicates as being ready to print.

  When I try to print a test page, I get an error saying that the test page does not print, and returns me to the resolution of the problems... that found no problems. I'm able to share files between two thin computers and the printer works fine from the office and by other computers on the network.

  I tried to uninstall the printer and reinstalled, I've updated the drivers of HP, restart both computers. I have read other forums that suggest you add as a local printer, however, I put the name of exact port showed when detected as a network printer, and it does not find anything.

  I am really struggling to find a solution and I really need to be able to print from my laptop, so any help would be much appreciated.

  Thank you

  Fran x

  Hello

  As you say that you are not able to print the Test Page, it seems that the printer is not connecting to laptop with Windows 7. You may need to reinstall the printer and try to add ports manually during the installation.

  Also, follow the link given below to solve printer network problems.

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  It is an article of Windows Vista, you can always try the suggested steps and check if that helps.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - network printer installation fails - lack of hpzpplhn.dll

  Using psc 1610 all-in-in-one as a network printer on a small home network wired workstations XP and Vista.  Worked fine until I replaced the Office XP with a Windows 7 one.  First I installed directly connected to the Win 7 desktop computer, using the original CD - worked well.  Move the cable to the router, but the network printer could not be identified.  So added the printer giving the IP address of the port, but could not print with it.

  The latest version of the AIO_CDB_NonNet_Full_Win_WW_130_141.exe software, but still could not print.  Have another printer Photosmart C4480, decide to pass.  Had excatly the same experience.

  Has begun to hunt the messages of error, and in the case where the Viewer, I found the message that the network printer could be brought after due to a missing driver - hpzpplhn.dll.

  Where can I find the hpzpplhn.dll?  Help please!

  Wow, impressive set of tests!  Well done!  I think you have proved that it is not your computer or your software with this test.

  Non standard routers can often have standard and odd firmware means of handling something other than a Windows PC, Internet connection.  In my view, that a new router you would solve problems.

  Looking for a router "Wi - Fi Certified".  I like Linksys because, well, they are inexpensive and they seem to work reliably for years.  The WRT120n or WRT160n are easy to find on sale.  Amazon is a good start.

• Install HP Photosmart B210 fails (network) - "Printer Installation Failed" error messages

  Hi - I have a HP Pavilion Elite HPE on a home network with a wireless HP Photosmart B210 printer/scanner.  This configuration has worked for > 1.5 years, then about 2 weeks ago, I could not print from any application.  Win7 would post "cannot communicate with the printer.  Here's what I did:

  (1) uninstalled - reinstalled driver SW repeatedly - however, Win7 messages "Failed installation of the printer" at the end of the installation.

  (2) the HP print and scan doctor finds the printer wireless-, but can find no defects or problems. All green checkmarks

  (3) I copied/pasted the address of Web page in IE - in the Home tab's built-in Web server it States "system error - network connection error.

  (4) scanning works fine wirelessly and if I connect the printer via a USB cable - I can print.

  (5) I have a Lenovo and Ipad desktop computer on my network that impressions wireless - so, seems, the issue is with the Elite HPE only and not the router.

  (6) if I'm in Excel and select search for printer - I get the error "domain services active directory are currently unavailable.

  (7) I checked the printer spooler and it is started and set to automatic.

  I want to keep the ability to print wireless, however, if I can't solve this problem, I have to constantly connect via a USB port.  Any suggestions on what is wrong?  Thank you, Rob

  Hi Erico,

  Thanks for the reply.  I ran the "sfc/scannow" command from the line CMD (run as administrator) - completed without finding any breach of integrity.  I reinstalled SW from HP (PSB210_Basic_x64_231.exe) and installed without problem.  I was able to print a test page and a spreadsheet excel via the wireless network.

  It seems that this problem is solved.  Thank you for your help.

  Kind regards

  Bob has.

• Satellite L350-171: Question about the Draft N card WiFi Intel 5100

  Recently traded this machine after having fun with a P300.
  My question is this; under the properties of the 5100 in Device Manager, there is an option to activate the project-n, but does not have an option to select draft n in wireless mode.

  Project-n automatic selection or am I missing something?

  Hello

  The laptop was equipped with the Intel WiFi Link 5100AGN wireless network card.
  This wireless network card supports without a doubt the 802.11Draft - N.

  Go to-> Intel WLAN card device manager-> properties-> Advanced tab.

  Here you can check if the 802.11Draft - N is activated.

  Welcome them

• Satellite L350-171 - PAGE_FAULT_IN_NONPAGED_AREA message

  My laptop has developed what seems to be a hardware problem.
  Whenever I turn it on it displays a blue screen of death.

  PAGE_FAULT_IN_NONPAGED_AREA
  Tecnical Info * STOP: 0 x 00000050 (0x89b00000, 0 x 00000000, 0 x 00000000, 0x8dc8ed23)

  I think it's the hard drive, as I deleted it from the laptop, put it in an external hard drive enclosure and I connect each pc to the almost immediately blocked.

  Y at - it any sort of way, the hard drive. And if I replace it how can I get the OS on it since I have no recovery disks.

  > Is there any sort of way the hard drive. And if I replace it how can I get the OS on it since I have no recovery disks.

  You can use a common HARD SATA 2.5 disk. This type of HARD drive should work in L350.
  It seems that you didn't create a disc of recovery in the past. Right?

  Well, in this case, you will need to order a recovery disc reinstall system which has been pre-installed by Toshiba.
  This disc can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Impossible mode AHCI for Satellite L350-171

  Hello

  Recently, I installed XP on my laptop which had VIsta on it previously. The installation was successful, and I managed to install all the drivers. The only problem I have now is not being able to activate the AHCI in the BIOS without having to restart the laptop. I installed the ICH9 SATA drivers and I can see them on the hardware device page. I was wondering if anyone else has had these problems, I don't know if this has affected my laptop because sometimes I get the blue screen of death.

  If you need more information please let me know.
  Thank you
  Kind regards Kevin

  Hello Kevin

  As far as I know after the installation of Windows XP Home edition, you cannot change this mode.
  So before you start the installation of Windows XP Home edition, you must set the mode in the advanced settings of the BIOS.

  I ve been tested once and I've install WXP in compatibility mode. Later, I changed it but every time when I started the OS I got BSOD.

• Re: Satellite L350-171 starts

  Does anyone can help with a problem?
  I'm having with my laptop.

  My daughter was on the laptop and it will stop all of a sudden.
  When I try to turn it on, it goes to the Startup Repair and goes no further.
  I let it run for 18 hours, and he still says his search for problems.

  Any ideas anyone.

  Thank you

  Hello

  Have you tried to start again and to use one of the options in the Advanced Start menu?
  Restart the computer, press F8 and the new start menu should appear.
  Here, you can use option called Mode without failure.

  If the laptop does not start using this mode, try another called; Last know configuration (Advanced).

  Last but not least, you can try to restore the system by choosing the first option called fix my computer-> Toshiba HDD recovery.
  Now the laptop should start the collection procedure and needs to be reinstalled the operating system

• Re: Touchpad stopped working on my Satellite L350-171

  Are my touchpad stopped working and the 2 buttons below. I have been using only a usb mouse, but I want to free up space, are there solutions please.

  Please check first if the touchpad is enabled or disabled.
  Use the FN + F9 key combination and don't forget the touchpad is enabled.

  Also check the Device Manager and the entry for the mouse and other pointing devices. Touchpad is listed here?

• Satellite L450-171 - Dual boot with Windows 7 and Windows XP

  Hi all
  I bought a Satellite L450-171 with pre-installation of Windows 7. For reasons of compatibility, I installed Windows xp on an another computer partitition.

  But in the marketing, I don't see the two operating systems. I don't see Windows xp.

  Please how can I do to be able to also run Windows 7?

  Thank you in advance.

  Hi josedunet_1,

  Normally the start menu where you can change between the two BONES will be created if you install XP first and than Windows 7.

  Now in your case, you need to change the boot sector. Therefore, you can use a tool with GUI like EasyBCD. You can manage it in just a few clicks.
  Check it! ;)