Satellite L350-203 - capslock button began to blink

Similar Questions

• Satellite L350-203: unknown devices after installing Win XP

  Hi all

  I havve a L350-203. The problem is he wandered, and someone erased the hard drive.

  I have the OEM XP Pro disc (I have it retrofit on Vista for networking) but the drive of Toshiba systems is missing with all the drivers of motherboard on the subject. Result - a long list of "unrecognized devices.

  On the Toshiba support, none of the models correposnd-, they are all like L350-2701 or 2021 or similar. Nothing for 203

  Can anyone help as to what model it is?

  Blessins 1 million for all the help - I reall miss this machine (using another unit instead - a pale imitation!)

  Hello

  > On Toshiba support, none of the models correposnd-, they are all like L350-2701 or 2021 or similar. Nothing for 203

  Satellite L350-203 belongs to the series PSLD8E and the drivers for this series are on the European driver Toshiba page.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Please check it and you will find the Win XP

• Satellite L350 - D 215 black screen with blinking cursor

  Satellite L350-D 215 black with cursor flashing screen - it worked fine said he had to restart and that's what happened, I can't in windows allows any single me in bios and Boot Manager.

  I am looking for help to solve this problem. I don't know what went wrong, my warranty runs out on December 26, 2010 so if I can't fix it myself can I have return to toshiba to fix. I'm at a loss as to how to solve this problem, I have no disk for laptop recovery.

  I tried the fix when you remove the battery and press the power button to 30 seconds doesn't not work, also tried leaving a few hours without battery and tried plugging in to power same, toshiba screen and only boot in the bios etc usually let HDD boot in windows only in black screen and blinking cursor.

  Any help much appreciated. I saw the restoration of disks for £9.95 on a Web site for the machine so don't know what to do... totally empty.

  Hello

  I agree with Akuma.
  Blinking cursor means that the Windows OS can not be loaded / booted up.
  You need to reinstall new OS.

  If you have a Microsoft windows CD you can use this disk to reinstall the operating system. The necessary drivers can be downloaded from the Toshiba page.
  Otherwise, you would need order a recovery disc Toshiba from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Totally dead Satellite L350-203

  In short, I recommend greedily Toshiba laptops to all my clients and friends and family.

  I have a Toshiba Satellite Pro myself, very happy with it, all those who have purchased after my recommendations are also happy, except that I recommended to a neighbour.

  In April 2009 I sent them a link to buy a Toshiba L350-203. After just 6 months, the mouse pad has failed and had to be repaired. This person uses the laptop occasionally for web browsing in general.

  Now, they turn to the top at my door, laptop in hand, totally dead, no power light or anything like that. To rule out that it is a power supply problem, a replacement power has been purchased.
  Once again no power whatsoever. Food is certainly get to the plug of the adapter.

  I think it's evil because it's just 15 months or two and saw very little use, it also leaves my tips for buying considered a bad recommendation and my reputation is on the line.

  Someone suggested the hard drive could have died, perhaps my logic is wrong, but if the HARD drive was dead, but the power supply has confirmed that the work, would'nt the power of the computer laptop, but just fails to start? I know that on a PC, even without a disc hard, it will fuel yet.

  I pull on my laptop HARD drive, unfortunately, the connections are the same type, but laid out different. I don't have access to another drive, with that I can test. The power supply seems to be ok, but I did not open the laptop to check physically, it apppears solid.
  So shaken a little bit there is no sign of a power indicator. No power light, no light, totally dead unit.

  I don't know what to do, as it is now out of warranty as far as I know, it will cost them financially, firstly we'll still look for my advice never & I lose credibility, secondly I doubtfully recommend Toshiba again because of the lack of reliability.

  I hope Toshiba will specify this is a rare occurrence and something can be set.
  This would be most appreciated.

  Hi guy.

  Indeed, I also recommend the use of Toshiba laptops but such problem of course can always happen it s any laptop manufacturer or model of mobile phone is.
  Computer laptop is a machine and machine would dysfunction like other machines do too.
  I have two different Toshiba laptops and I never had any problems with the units.
  However

  > Someone suggested the hard drive could have died, perhaps my logic is wrong, but if the HARD drive was dead, but the power supply has confirmed that the work, would'nt the power of the computer laptop, but just fails to start? I know that on a PC, even without a disc hard, it will fuel yet.
  I doubt problem s HDD given that the laptop powering not upwards and does not POST (power on self-test) if the HARD drive is faulty, then the laptop would be always able to start, but you get an OS message was not found.

  > I don't know what to do, as it is now out of warranty as far as I know, it will cost them financially, firstly we'll still look for my advice never & I lose credibility, secondly I doubtfully recommend Toshiba again because of the lack of reliability.
  The laptop is 15 months old. Generally, the standard notebook warranty laptop duration 12 months. But if the laptop was placed on the page of Toshiba, then the guarantee extend to 24 months.
  So if the laptop has been saved in the past, then the warranty should always be available.

  Anyway, back to the question, I think that the RAM (memory) should be tested also. If it s RAM DO not matter, then the motherboard could be affected and in this case the motherboard needs to be replaced.
  This can be done by a Toshiba ASP.

  I recommend so get in touch with the local ASP in order to check the laptop parts!

  Good luck

• Satellite L350-203 to TV connection problems

  Help, please. I tried several ways to get my laptop connected to my TV Panasonic older, and simply not happen.

  I first tried a cable SCART VGA. I changed all settings as low display they would go (16-bit, 800 x 600, 60 refresh rate).
  I only got a buzz off my TV, with diagonal movement white. The frequency would change with the movement of the mouse, or editing the page.

  I now have a RGB VGA cable, and all I get is a black screen with the same buzz.

  Does anyone have ideas for either of these cables to work?
  I really want to watch my AVI movies on a suitable screen.

  Thank you very much
  Mel

  Hello

  The laptop supports only a VGA port.
  VGA port is designed to connect to the laptop computer screens.
  Old TVs supports a 576px resolution (720 x 576).
  I guess that the resolution is still too low that even you have changed the books at 800 x 600 resolution.

  You usually have a s-video port to get a video on tube old TVs. But this laptop supports only the VGA port.

• Re: Satellite L350-203 - start-up windows problems

  Hi, having a problem with this laptop. One day, when it would not start windows, it would go through the bar loading, then just a black screen and not progress any further.
  Tried to fix the operating system Vista with the disc that came with the laptop and restore to another date, but it wouldn't work. Also tried to boot mode safe but it hang loading "crcdisk.sys", so I used an ubuntu live CD to boot into ubuntu and back up my data so I can re install windows.

  Reinstalled vista, wipe the hard drive of all his scores in the process. It worked for a few days, but now the same problem happening again. Have tried to start in safe mode but still hangs on "crcdisk.sys.
  I also used tool of windows memory diagnostic to check the memory is OK, and also the software on the vista disc that checks the hard drive is in good condition as well, but these two tests came back fine.

  Does anyone have solutions?
  Very appreciated

  Matthew Gorst

  Hello

  The crcdisk.sys is a Microsoft Windows CRC disk file. I recommend doing:

  ! Insert the Vista Dvd disk into your ODD.
  2 select Repair
  3 then, command prompt
  4. type in the command prompt (all commands followed by Enter)

  Bootrec.exe /fixboot

  Bootrec.exe /fixmbr

  5 restart

  Hope it works

• How can I remove the button from the SPACEBAR on Satellite L350?

  I have a brilliant nine of Satellite L350, and a few drops of orange juice got splashed on the lower part of the keyboard.
  The keys are all very well, except the space bar.

  While this works, there only 'click' when pressed.
  Now I don't know if it's going to be interesting to try to raise the bar of space out and clean.

  If this is the case, I'd appreciate some instructions on how to extract.

  Thanks in advance.

  Hello

  Generally, all the keys on the keyboard are only glued on the keyboard and it should be possible to remove it easily.

  I couldn't remove my buttons with a thin object.
  I put the thin object under the button and put the space bar to use carefully.

  If you do this please be careful because if you use too much force, you may break some media.

  Good luck

• Satellite L350 - cannot install Vista and how can I backup my data?

  Hi all

  I have a Satellite L350 and recently I installed Vista Home Premium in another language (the OEM Vista was in English) in the hope I could activate it with the OEM key, but I did not.

  When I tried to re - install the Vista OEM of WinRE I realized I can't access it, and then I got a "brilliant" idea that will format the C partition with Acronis Disk Director he could boot to WinRE. There can be no.

  Fortunately, I have burned before recovery disks. The only problem is that the whole HARD disc recovery disc formats and I have data on the second partition that I would like to recover.

  I tried to install Vista retail again to save the data of the second partition (Yes, I'm a fool, I did not before) but it stops after the first reboot. I get a black screen with an underscore will blink.

  I really need that data, please help!

  Hello!

  I can tell you why you can t install a version of Vista with product key. It's pretty easy because the button on the lower side on the laptop belongs to the preinstalled OEM version and t can be used by a commercial version.

  However, I think the best way to back up your data would be that you put the HARD drive in an external HARD drive enclosure, and then you can back up your data on another PC or laptop.
  These cases of disc HARD external are cheap but very useful.

  Good bye

• Re: Driver Installationsur Satellite L350-20 q chart

  Of my desktop PC, I downloaded and unpacked the graphic driver for my Toshiba Satellite L350-20 q on a USB stick as drive m:.
  The installation_readme.txt says "enter the"Graphics"subdirectory. Locate and highlight the
  "igdlh. INF... Click on the button 'open '. "but the only *.inf in m:\DriTosh\Graphics\'s kit14212.inf...

  Clarify and correct the readme file.

  Hello

  Can you please tell us what you want to do exactly? What OS you use and what was the reason for the laptop repair?
  I imagine that you have installed the version of the own BONE and now you need to install all the necessary drivers, tools and utilities, right?

• Satellite L350 does not connect to the internet, network adapter yellow exclamation

  Trying to help my Nan with his laptop...
  Model is Satellite L350-170

  Does not connect to internet, even using the Ethernet cable. Network cards have yellow exclamation marks on it and seems he needs an updated driver. How the hell can I download and update if it does not connect to the internet. And then, what update is necessary, because I searched on here and there is no update driver for network card?

  She had various internet help from its supplier and a visit at home but still no joy. Internet works fine on other devices. Any advice greatly appreciated.

  All the drivers can be downloaded from the Toshiba UE driver page.
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp
  Choose your model of laptop in the form of download and the system that is pre-installed on you unit.
  Then, you will get the list of drivers.

  If you are not able to connect to the internet due to lack of driver LAN/WLan, then you another computer for download.

  You asked how to remove the network card?
  Usually, you need to access the Device Manager (in Control Panel) then we need to expand the area to network adapters and you will find the LAN and WLan card.
  Click the single LED adapter, and then press or click on uninstall button driver

• Satellite L350 - screen turns pink

  Hi guys, I was wondering if you can help me!

  I just bought a new Satellite L350, but after a few days of working with it, my pc screen goes pink! It goes back to normal for a short time, then flashes and then goes back to a shade of pink!

  I handed my laptop to the dealer, but after a few days, the dealer gives me the laptop and said that the laptop is OK. (the laptop was not repaired be the dealer, has only been tested, but no problem occurs at the moment) Now it works normally...

  I thing this is a manufacturing problem material, because it happened just the power button is pressed, the window is load.
  I've read a few articles on the internet and most of them referred to it as a problem of bulb.

  Do you: I must insist to the dealer to replace my laptop with a new (or repair) o

  Any ideas?

  Thanks in advance,

  Have you tried to update the display driver and BIOS? Maybe it s a hardware issue, but first, I would try to update the two things.
  Consult the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You have the same problem on an external monitor? Can you check that out, please?

• Satellite L350 - 16L system restarts when you run with power cord plugged

  Satellite L350 - 16L
  32 bit windows 7 ultimate sp1

  Power cable is connected, start the start, and just at the point where desktop should appear, the system restarts.
  When the system is running on battery, everything works fine.
  When the system boots to battery, works very well, and if I plug in the power cable, the system hangs
  When the power cable is plugged in, battery charge normally.

  I tried the different power cable, same thing.

  Do you remember when this issue began to appear?
  It would be interesting to know if something special that has happened in the past
  You use the original Toshiba AC adapter that came with this laptop?

  I think that this problem occurs due to the problem of the motherboard and I imagine that there could be some electronic problem power if the AC isn't affected adapter.

  I think it would be the worst case, because it means that your motherboard must be replaced to solve this problem... motherbaord replacement is very expensive and, probably, it is not worth to fix...

  By the way: is it possible to reinstall the system, while the laptop is conencted to the power adapter? What happens if enter you BIOS mode?

• Satellite L350 won't boot to the top

  Satellite L350 my daughter does not start. When you press the power button, the HARD drive light and there is no HD activity. Something that was noted is that the battery is fully charged a couple of days, but today when I tried to boot up the laptop, the battery led shows that it is unloaded. Does anyone know a remedy to fix the problem?

  Sorry, but I still don t understand what happening exactly when you try to start the laptop.
  Remove the battery and connect the laptop on AC power only. When you do this press power button to start the laptop.

  What exactly happens? You don't see anything on the screen?

• Satellite 1900 203 does not illuminate

  Hello

  I have a laptop Toshiba Satellite 1900-203 that I just opened the rest of blue.
  After I disconnected radiator and the CPU cooler filled with dust (beaten with dust) then I removed the cooler and the cleaning of the radiator.

  Then I assembled everything back together as a unit.
  I was what you got and when I tried to turn it on is the silence (and the monitor of the Caps Lock key is not on.).

  All the rest go. I did a few tests to see who ' s:
  (1) I joined my silence just LCD monitor and the laptop...
  (2) I put the network with the laptop because he had net of my table pc and monitors the network and death and the last attempt
  (3) I joined the laptop Music Center and dead (not hear anything).

  I think probably one of the causes can be RAM burning function.
  In fact, it's very strange because how and which burned Ram... they can go better... but still 2?

  Oh yes, I forgot to say that I tried to put the only RAM and the same thing.

  Please help me... I've yet to meet such a problem and I have no idea what could be wrong.
  What should do?

  Can be bought for a RAM? What is? Waiting for your answers.

  Hello

  What about my friend?
  Have you disassembled your notebook following some instructions or yourself?
  You have experience with this sort of thing?

  How can you be sure that everything is properly connected again?
  What happen exactly when you press the power button / stop? Is there a reaction?

  To be honest I do not have this problem because of the RAM. In my opinion you didn t it assembled correctly.

• Cannot find the memory of the satellite 1900 203

  My satellite 1900 203 has a memory problem and I want to replace it.
  The manual says there is no memory which is really internal and fixed to the motherboard. The memory would be on 2 slots extension, available for the upgrade to 1 GB.
  On the place indicated, I see a location for a memory, but it is empty. Place a module of memory here upgraded the size, but does not solve the problem.

  Can anyone tell me where I can find the internal memory, if it is fixed or not and give me the part number.

  Thank you!

  Hello
  the part number for your 1900-xxx:
  PA3126U - 1 M 12 PC2100 128 MB
  PA3127U - 1 M 25 PC2100 256 MB
  PA3164U - 1 M 51 PC2100 512 MB

  The internal memory module is placed in a standard memory slot under the keyboard. You must remove the little plastic cover where the Power On button. Then, you will see two screws that hold the keyboard. After removing, turn the keyboard on the palm rest. Then on the MOA, you will see a small sheet of aluminum foil. Under the present the memory module is located