Satellite L350 - Microsoft Word crashes after a while

Similar Questions

• Microsoft Word crashes when saving a document

  Microsoft Word crashes when you save the document, it's a basic vista windows, and when I try and that you save in word, this is Windows trying to find the Web page please wait then it restarts just... so boring

  See this article...

  http://support.Microsoft.com/kb/940791

  ... Please let us know if it helps.

  Tricky

• Satellite L350 - pad stopped working after BIOS update

  Hello

  The digital pad stop working after upgrading the bios on a Satellite L350-170 (1.90-online 2.20).

  Any ideas?

  Concerning

  The value of the default BIOS and test it again.
  NUMLOCK button works (LED on / off)?

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Satellite L350-172 - slow HDD after set SATA mode for compatible

  SERVUS of Germany

  Yesterday, I bought a Satellite L350-172 and I installed Win XP pro on the HARD drive
  So far so good.
  Driver found on the Web site and so on that I spend in Bios the SATA Mode on "compatible" because the AHCI mode does not work with XP.

  In my view, disk access is slow and windows hang up so that the closing

  Does anyone know how to solve the problem?

  Thank you

  Hello

  It is not unusual that your HARD drive runs slower after the change of mode of AHCI SATA compatible.
  You have disabled the SATA feature and so you cannot use the benefits of SATA.

  And I must say that you are wrong buddy if you say that the AHCI mode does not work with XP.

  You can use the SATA in Win XP, but you must include the SATA driver first.
  Intel Storage Manager contains the SATA driver, and you could include using the nLite software.

  Good bye

• Satellite L350-203: unknown devices after installing Win XP

  Hi all

  I havve a L350-203. The problem is he wandered, and someone erased the hard drive.

  I have the OEM XP Pro disc (I have it retrofit on Vista for networking) but the drive of Toshiba systems is missing with all the drivers of motherboard on the subject. Result - a long list of "unrecognized devices.

  On the Toshiba support, none of the models correposnd-, they are all like L350-2701 or 2021 or similar. Nothing for 203

  Can anyone help as to what model it is?

  Blessins 1 million for all the help - I reall miss this machine (using another unit instead - a pale imitation!)

  Hello

  > On Toshiba support, none of the models correposnd-, they are all like L350-2701 or 2021 or similar. Nothing for 203

  Satellite L350-203 belongs to the series PSLD8E and the drivers for this series are on the European driver Toshiba page.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Please check it and you will find the Win XP

• Satellite A80 - Microsoft Word / Powerpoint / Frontpage get suddenly closed

  Hello

  I've just updated Microsoft Office in my Toshiba Satellite A80, MS Office 97 to MS Office XP, and it is not working properly.

  The problem is that MS Word, Powerpoint, and Frontpage get suddenly closed as soon as I type anything. Excel and Access are working perfectly. I Don t understand that is the problem.

  Please find below some information on my laptop:

  -Model: Satellite A80-135 MS
  -OS: Windows XP Home Edition 5.1.2600 Service Pack 2
  -Bios: v1.50
  -CPU: Processor Intel Pentium M 1.6 Ghz
  -Memory: 504 MB of Ram

  Could someone help me with this?

  Thank you very much
  Oscar

  Post edited by: danhielo

  This isn't a laptop problem, but certainly something wrong with your Microsoft software.
  In addition the Toshiba laptops are not delivered with Microsoft Office software.

  I think you should contact Microsoft technical support for more details.

  A hint; I recommend reinstall the MS Office XP again. Do not update from Office 97 to Office XP, but perform a new installation.

  After the new installation, refer to the MS Update site and install all belonging to Office XP updates

• Satellite A500-19U - games crashes after 3 Min then only connected to the power adapter

  Heys guys. I got my new Satellite A500-19U and install it on some games like COD4, Batman, Assasin Creed and many

  All of these games crashes & freezes after 3-5 Min & gimmea the screen black or white and everything happens while pluging adapter to recharge. When you use the battery, it crashes too, but it takes a long time. Some time, he said (the display driver not responding) & sometimes the screen black or white. The only way to recover the laptop is ALT + CTRL + DELETE and kill the game processes.

  The only one that works such fine bit is Battlefield Bad Company 2. Then I change the DirectX (setting.ini) of car in DirectX9.

  SP please any help on this matter. I think it's a video driver or a Windows 7 problem. And the specifications are:

  Processor: Inter Core 2 Due P7450 2.13 GHz
  RAM: 4 GB DDR3
  VGA: Nvidia Geforce G210M [with the driver from Toshiba Site]
  OS: Windows 7 64-bit

  SRY 4 my English: $

  Hi Storm2005,

  A 64-bit Windows 7 preinstalled on this notebook or install it yourself?

  In my opinion, you should check the cooling options in Windows power management. Make sure that it s set for maximum Performance. This means that your laptop will be cooled as much as possible.

  I put t know how long you have this laptop already but maybe that cleaning is also an option.

• Satellite P200 - all browsers crashes after 5-20 minutes

  I'm losing the will to live with this laptop.
  Satellite P200-13z with Vista 32 bit

  The question is this... no matter what browser I use, it will freeze and hang. Opera, IE and Firefox. Sometimes, it will be good and knitting for 20 minutes, sometimes it will crash in 5 minutes.

  I updated my drivers, made re - installs operating system clean, tested my RAM, stop all the but MS services, virtual memory increased, prayed in various Germanic gods.
  I have Avast and Zone Alarm connecting only Non MS. services I can stop them and see what happens, but not sure it will cause.

  I am of the opinion that we linked memory and how it is handled, as possible aligned with Adobe Flash (arrow). Maybe a Vista problem.
  Uninstalling this curse (Flash) does not seem to solve the problem either.

  Can someone point me in the right direction? 18 months trying to solve this problem... and now I need the laptop to full time it needs to be fixed.

  It is not an isolated problem that or the other, google image search "vista all the browser crash ' to see what is happening there and completely lack of knowledge or solution for this problem.

  Thank you very much in advance for a supported.

  Hello

  Do you mean exactly by accident?
  None of the browsers only freeze or you get a blue screen?

  Have you noticed the behavior even if you use another application like Word, Excel, some Windows games or something similar? This occur using only browsers?

  I have Satellite P200 too and after 2 years of use still works well.
  To be honest I've never heard that someone is looking to fix at 18 months. It can be fixed, or you need professional with that help until the warranty is valid.

• Satellite A100: Screen turns off after a while of no action and cannot be reactivated

  Hi all
  I'm after a bit of advice/help. I have a satellite A100 & after its been on during an extended period with no keyboard (like DVD burning), the screen is empty. It does not matter the keys on which I support on I can't get it back. The only way to get out of what I've found is to reboot the machine.
  Any help would be greatly appreciated
  Thank you
  Gary

  Hello Gary

  Try please install the latest display driver, you can find on the download page of Toshiba. It is also recommended that you update the BIOS with the latest version available.

• Satellite L555 - 11K - guard crashing after a few minutes

  My laptop crashes, sometimes after 20 minutes, sometimes after only a few seconds. The network is working properly and temperature says 50% although the mouse mat and a part of the keyboard becomes very unpleasantly hot.

  As far as I can tell, I have installed all drivers "updated" but why should I do it manually beats me? All my other computers do it automatically (I own and administer a crèche for children so I have several PC it). I'm starting to suspect that this laptop is a little Italian, fab in the research of design, but the mechanics are very skittish, "health monitor" showes no problem

  I'm a deep dunce with computers, but very good with kids
  Help, please
  Chi

  Post edited by: Chi
  OK just looked through the history of the forum. Try blasting some salvation air pressure inside!
  Today Toshiba said also that my serial number is not valid? yesterday, they accepted it? makes no sense

  Hey Buddy,

  Theoretically it could be caused due to a higher internal temperature because you wrote that the keyboard and the touchpad is very hot. I would recommend using jet of compressed air to blow the dust from the cooling fans. You should check out this article from Toshiba:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  Regarding automatic updates: for the driver and the tool updates you must install Toshiba TEMPRO and check that the Windows updates are enabled. ;)

• VISA wave GUI crashes after a while

  Hey everybody,

  SUMMARY:

  
  

  I'm working on a project through my University that has the reading data from a disk USB eZ430.  The eZ430 is connected to a (a Board using a MSP430) wireless receiver that receives data from a remote sensing node (also a Board MSP430) based.

  We have developed a .vi displaying our data on two charts of waveform - one for data of temperature and moisture collects data we are from the remote sensing node.

  The GUI works fine for a random time then it will interfere.  This hook may occur a few minutes or even a few seconds of operation the .vi

  Sometimes the hangup returns an error and sometimes LabVIEW goes into (no response).  I'm currently trying to reproduce the error popup so I can provide the error code - I'll add to this post as soon as it arrives.

  DETAILS:

  Our transmitter sends our data in a package that contains a numeric value and a header - either A or B.  A process our temperature value while B is the header of our value of moisture.  The string is then terminated by '\r\n '.  The range of numeric values between 0 and 4 096.  A series of packets in hyperterminal would be as follows:

  A1034

  B901

  A1040

  B895

  ...

  We assume that the number of bytes is 7 - (A one) + (an each number) x (4 issues) + (1 per \n) + (1 per \r)

  The .vi tries to pull the A or B of the string using a string splitting function and inputs then the letter A or B in a housing structure.  This case structure decides what inputs are based on the input byte A or B that is extracted from the string.  The numeric value that is passed into the structure of the case came out to our table of waveform accordingly in case whatever is determined.

  It was also necessary to include a third case, case C to be committed of a broken by default to prevent any reads null of being mixed with our actual data.

  WHAT WE TRIED:

  So far, we have tried several things:

  We have included/enabled to check the stop ('\n' = 0x0A) character in the block of visa Installer.  We also tried assigning this character ('\r' = 0x0D).  With no luck, we tried the other obvious option to let the disabled stop character...  In each case, we re programmed our show node to have ONLY the tank of respective termination (or none) and adjusted our number of bytes.

  I understand that our case may be situational and difficult to debug without our actual transmission and reception of the nodes, but I was wondering if there may be something obvious jump in the eyes more qualified.

  All advice is appreciated!

  Hmm... .

  Why are you closing your reference CITATION after every read?

  You have to keep it open until you are finished with it and then close it.

  In addition, you have controls and indicators which do not have labels.  This could cause trouble LabVIEW but I'm not sure.

  Your loop runs also without waiting if you have problems using CPU.  Read VISA can provide a delay time for you well.

• Illustrator CC crashes after a while of use.

  Hi, I just downloaded the suite yesterday and thought I would try HAVE today. I can open the program without problem. Open files, create files and work on them, then save them along the way. Then after about 10 minutes, it freezes. I can't click on anything, only the close button. I have the auto save set at all hours, so I don't think it's a matter of economics. I also don't think it's a matter of file size because if I have a blank page open and do nothing for the document, the result is the same. I'm after update to my way of thinking of graphics card that was where the problem was, but the result is always the same. My Task Manager indicates that the memory used when I am clicking on suite with illustrator is about 25%, including chromium used in the background.

  I am at a loss, I can't seem to find solutions online or other queries that seem to correspond to what is happening. Any help will be appreciated.

  I'm working on windows 8 by the way.

  Thanks in advance!

  There are several Chrome addons that will interfere with the AI. Alternatively, you can have software security such as Webroot or some security password that is causing problems.

• Satellite A100-237 (PSAA9) crashes after update BIOS 5.10

  I have a psaa9 A100-237
  I recorded my book and went in the updates section
  There was an update of the available BIOS, I had version 2 before I updated to 5.10.

  Now everything has gone well, but the laptop is restarted, it blocks every time on the start screen where the toshiba logo is displayed.
  I can't log into BIOS, boot from the CD or anything.
  When I press ESC black screen just showing bios version 5.10 memory pass and things, also written there is error TRM (TPM?) or not found.

  I used the method of updating the bios windows and followed all the directions, wts the problem?

  Hello

  May I ask why you updated the BIOS?
  You are 100% sure that you have updated the BIOS with the correct procedure and used the good BIOS?
  Have you read the Description of the Toshiba BIOS update before continuing?

  As far as I know the BIOS 5.1 has been released to use and install Vista on this laptop!
  Hmm, maybe something goes wrong during the update procedure and, therefore, the laptop cannot load and start correctly.

• Satellite L350-262 touchpad stopped after the latest updates of windows

  Hi all

  Last Friday, when closing close to 11 updates have been applied to Windows 7 (32 bit). When I got to the top of the laptop this morning the touchpad has stopped working and I had to plug in an external mouse.

  So far I tried to download the driver from the site of Toshiba, uninstalling the driver, reboot and then reinstall the driver and it did not work.

  Not yet opted for a restoration of the system, before I try that someone else had this problem?

  Any ideas on how to cure?

  Thank you

  Are you sure it is not disabled?
  Check the FN + F9 key combination