Satellite L50 - B - 1 p 1 wifi question Bravia KDL-42W653A

Similar Questions

• Satellite L50-A-15 x - a few questions

  I have a C50 - A - 15 x laptop whose HARD drive died. Had 10 Windows installed.
  The version that came initially was RTM of Windows 8 Core. Like many people I have not backed up the recovery image. Because the activation of Windows 8 key is stored in the BIOS firmware I searched the internet for the version is equal to the computer has brought. In fact when I connected to the net, the activation was successful. What turns me crazy, is that now I have to go through a massive update of Windows 8 to be able to upgrade to Windows 8.1 and later for Windows 10.
  What I wonder is if a next time, I do a clean install of Windows 10, activate it at Microsoft as an upgrade to the original version of Windows 8, or if I go again through this task (W8 - > W8.1 - > W10 - >...)?
  If I still have to install the original version of Windows 8 will be able to create an image of which I ve installed now to save me time? How?

  Can someone help me?

• Satellite L50-B-1N8 - weak wifi signal

  Hello

  So two weeks ago, I bought a new laptop of Toshiba Satellite L50-B-1N8 of Argos.

  He never had too good a force wifi signal (bars never complete - even when sitting next to the wifi router) but I thought it was due to my wifi box and possibly the time of garbage that we had.

  However, I still have my old laptop, and when you check the WiFi side by side, my old portable Samsug picked up the signal full or almost full so this new Toshiba picked up a bar at a push.

  Since then, I took the laptop to my parents and he struggles to get the good WiFi, if no signal there too.

  It's super frustrating because it get wifi, it get just a very weak signal or nothing at all, and as soon as I move my laptop... literally a few centimetres, it will change the wifi signal or my wifi signal is cut and it will be impossible to connect.

  I did everything I can think of troubleshooting to actually factory reset my laptop that none has worked so far. The factory reset seems to have actually done worse, rather better!

  As I said, my router is not the problem here, I have my old laptop that connects very well, as well as two other laptops and mobile devices that all have connected to wifi very well and with full signal!

  I disabled all these wifi devices to see if this is the problem, but that did not help or the other. I also have a booster of wifi in the House, so all devices have full or almost full signal, but it seems of no use for this Toshiba.

  I lose my home, is there anything else I can do? I'm still in the warranty of 30 days of Argos if the laptop is down, but I just can't think of anything to try. I just hope that if the laptop is down Argos will help and either pay the phone or Exchange.

  Any help or advice would be much appreciated. :)

  I think first of all you must check if the wireless performance question isn't related to energy saving settings.

  Go to the control panel? Windows power options.
  Choose the current power plan
  Now, you must click Advanced power settings.

  In Advanced Power settings you will find different options, search for LAN wireless (WiFi) and choose the Performance for both options (battery and power)
  After that, restart the device.

  I hope that this short change might help you.

• Low WLan/WiFi signal using satellite L50

  I bought Toshiba Satellite L50.

  I really bard WIFI reception - good now I sat 2 meters between the router and I have only 2-3 bars.
  If I am to 7 meters away, I have no reception at all.

  There is no problem with the router, I checked with other devices (phones, laptops).

  When I'm with a direct access to the internet with internet LAN cable is always at maximum speed.

  I made sure that I have the most up-to-date drivers for my network card.

  How can I solve this?

  I have the same problem with my new ray. The network is not received even though I'm 3 meters away from my router!
  Have you found a solution?

  Posted by someone110
  

  I bought Toshiba Satellite L50.

  I really bard WIFI reception - good now I sat 2 meters between the router and I have only 2-3 bars.
  If I am to 7 meters away, I have no reception at all.

  There is no problem with the router, I checked with other devices (phones, laptops).

  When I'm with a direct access to the internet with internet LAN cable is always at maximum speed.

  I made sure that I have the most up-to-date drivers for my network card.

  How can I solve this?

• Satellite L50-B-13F - WIFI hotspot does not have a connection internet key USB

  Hello

  I have a laptop Toshiba Satellite L50B 13 E and I use the USB (with sim card) for internet connection that works very well.
  Now, I have a smartphone and I would like to turn my laptop into a wifi hotspot so I can use my smart phone in Wi-Fi to surf the internet, while I have the USB connected to the internet.

  I have 10 windows and I followed all the directions for the creation of the hostednetwork with name, password but my smartphone can only connect to wifi without connecting to the internet. Whenever I try to open an internet it page downlods for a few seconds and stops.
  I'm wandering if what I do is correct or even possible to do so. Is it possible to do? Should I use a larger antenna or need any additional driver?

  Help, please!

  Hello, I have a model Satellite L50 B 13th and for surfing the internet, I use the USB with sim card and it works fine.
  Now, I bought a smartphone and I like my pc to become a hostednetwork wifi so I can connect my smartphone, while the USB is connected.
  I created the wifi hostednetwork with name, password and I can actually connect the smartphone on the wireless network, but I can't surf the internet. Any help?
  Should I use the updated drivers or add an external antenna?

  Thank you!

• Question of the animation to boot Windows on Satellite L50-A-1F2

  Hi guys,.

  I installed Linux on my Satellite L50-A-1F2, and now when I start Windows, after the grub is sometimes very good, sometimes I see the stripes, or the Windows boot animation biased... sometimes, like now, I see the image of grub instead of the classic Windows logo. Everything works fine, Windows loading perfectly... but if anyone can solve this problem that makes me happy.

  Thank you! Sorry for my English!

  Hello

  I think that your problem is a gesture of challenge related to the Linux installed.
  Probably, Boot Manager Windows 8.1 has been replaced by GRUB in Linux and that's why the start-up procedure search differently.

  I have no solution for you, but recommend you to check a few FAQ and HowTo to configure GRUB

• Satellite L50 - A - 1 5 - question about max LAN speed

  Qualcomm-Atheros AR8171/8175 PCI - E Gigabit Ethernet Controller (NDIS 6.30)

  In the specifications it is said that this network adapter might work on the speed of the LAN 1 Gbps 1000base-t.
  But the max speed that is displayed on my system is 10BASE-T/100BASE-TX.
  Why?

  System: _
  Toshiba Satellite L50 - A - 1-5
  Windows OS 8.1
  Driver version 2.1.0.21
  Qualcomm-Atheros AR8171/8175 PCI - E Gigabit Ethernet Controller (NDIS 6.30)

  You're right, the network adapter. Atheros QCA8171B supports networks: 1000BASE-T/100Base-TX/10Base-T

  To use the range, the router should also support the 1000BASE-T.
  Did you check that?

  In addition, you can change the LAN settings in:
  Device Manager-> LAN card-> properties-> Advanced tab

  Here, you should check if 1000BASE-T option is selected and chosen.

  I also recommend you check the BIOS settings because as fat I know some LAN function can be enable/disable in the BIOS

• Question on Satellite L50-B-17-V FN keys

  Hello

  I have a problem that affects the function of the special keys of my Satellite L50-B-17-V with Win8.1, given that Toshiba has just introduced the new 1.90 bios, I'm not longer automatically, but pressing the fn key before, I was in the service of installation by modifying the bios, but it remains the mode standard f1 - f12.

  How can I solve this problem? Thank you

  Try it please change the Mode of function keys in the system settings tool.
  Open Desktop Help > tools & utilities > system settings > keyboard. You will find this option.
  Please try to change the mode to the special operating mode and confirm with apply.

  After doing this test F keys and post comments please.

• Satellite L50-B-1 q 0 - removal battery question

  Hi, I bought the product Satellite L50-B-1 q 0.
  With astonishment, I found that * the battery is not removable *.
  I always knew that when you use a portable computer, you must remove the battery;
  Then, I wanted to know if this product has a new technology where the battery life is not affected by the use of the computer when it is connected to the power adapter.

  Thank you.

  > I always knew that when you use a portable computer, you must remove the battery;
  For a long time I use Toshiba portable computers, but I never read these tips in the documents of Toshiba I got new machines.
  I have never done this in the past and I never will in the future. From time to time, you can use your laptop with battery only and charge again.

  You are right. Your laptop battery can not be removed, but there is no reason to panic. Sink the battery and charge it at least once a month.

• A few questions on Satellite L50-B-1HJ

  http://www.Toshiba.be/NL/laptops/satellite/satellite-l50-b/satellite-l50-b-1HJ/

  Hello guys

  just wondering if its normal for this model to have a very little noise in his hard drive?... and also it clearly says truBrite® HD TFT display high brightness with aspect ratio 16: 9 LED backlight
  internal resolution: 1366 x 768 in the specs, but why not not good as other notebook computer display... It's bright other led backlit screens are better... and I don't know if it is a device with the laptop, because sometimes when you go to a dark page and go to a blank page, the brightness decreases and then increases after a few seconds or a minute then...

  any ideas?

  Hello

  It s nothing unusual if a HARD drive create a sound. It happens more often during the reading or writing of data.

  Don t so worry about this but note: you should always create a backup from time to time because a HARD drive failure can happen unexpectedly.

  As you say; the laptop was equipped with a 15.6 LED HD display with resolution 1366 x 768. Following the display, the display brightness may vary.

  As far as I know that this kind of display supports the 200nit max brightness (nit is a unit of visible light intensity allows to specify the brightness)

  However, the brightness of the display can be decreased and increased by using the function keys (F-keys)

  In addition laptops equipped with the graphics card AMD supports the option called AMD Vari Bright which saves energy consumption by optimizing the contrast of the image.
  This feature can be turned on and off in the center of engine control AMD Vision.

  In AMD/ATI control center select power power play.
  You will find the box power play that enables or disables the function light vari.

  I suppose that similar functionality is in the settings of the GPU from Intel in case your laptop would support Intel GPU as well.

• Satellite L50-C-215: failure to install Win7 via the USB port, pb and toshiba.bg bug ' workshop

  Satellite L50-c-215 is a laptop sold without optical drive or OS.

  We bought it today.

  
  Questions:
  -We were told "it is compatible with windows 7", but what a salesman said, everything can be downloaded from the Web from Toshiba site
  -While watching the Web from Toshiba site, a link says 'no system operating inside'. Link is corrupt
  -2 "official" companies are listed for the Bulgarian Web from Toshiba site are wrong: nobody told on the phone that they are not official support from Toshiba

  
  Technical questions:
  -J' tried to put several Windows 7 ISO on a USB key, using the official Microsoft tool and Rufus, but I got error that says "CD/DVD Driver is missing."
  -In some forums, it is said that test the spirit of the thing that a USB 2.0 can solve if USB 3.0 will fail. Each USB failed.
  
  Sales question:
  -Although the European commercial law says people have a little more time to restore a non-working product and be reimbursed, when we returned to the computer at the Technopolis shop a few hours after the purchase, employees told us ' problem is not hardware: we do not cancel the sale, we can take over the computer and give your money. " "Problem is software: see with Toshiba.
  The best we could get was the address of a computer service non-Toshiba to try to ask if they might be able to install Windows 7

  
  I already spent half a day working on it
  What can we do to install Windows 7 or get the computer returned and refunded?

  Tried Tnings at night:

  -> Intall Ubuntu 12.04: card WiFi can't work, no Ethernet cable to update from the Internet

  The drivers are on the website of Intel, but solution install require packages to download on the internet, not USB

  -> Last Debian version: error starting in the command line

  -> 14.04 installed, Ubuntu box checked during installation to use the Intel Wifi device
  Re: software WiFi cannot connect. Spent a few hours on forums to try to understand how to install the Intel USB drivers. Does not work.

  For people who want to buy this model, try to get a player of optical disk to install Windows, a good cable to Linux, update or be prepared to spend time and money for the service simply be able to use the computer.

  Oh, another thing: Technopolis company is not able to provide you with enough information before buying a product. I will not say that they rip off, but almost: especially to overseas buyers, buy refusal refund to anyone who is not able to have an argument that was screaming in Bulgarian with them.

• Satellite L50-B-177 - after upgrading the BIOS can not use the Polish symbols

  Hi, I'm newbie here. This is my first post, so sorry for the plain text.

  I have a problem with the laptop Satellite L50-B-177 1 month of my wife. After update BIOS (from Toshiba Service Station) to version 1.70 I have this problem: it is impossible to use symbols of Polish that comes with ALT + z, ALT + x, ALT + c. other - ALT + a - works normally.

  Problem is the operating system independent (even on the live session of Ubuntu). I understand that this is a specific problem for the location of the Poles, but causes cell useless for my wife (she is a teacher and write a lot of text). As much as I know BIOS downgrade is not available for customers, and the weeks of waiting for the new package of BIOS is out of the question.

  Any suggestions will be appreciated.

  Hello

  This problem occurred imadiately after updating the BIOS?

  Have you tried to set the BIOS settings by default once the update is complete?
  If this isn't it.

  Also, check if the Polish keyboard language was chosen correctly and as a default value.

  Comments are greatly appreciated.

• Can I upgrade the Module Wi - Fi in the Satellite L50 - B?

  I currently have the Toshiba Satellite L50 - B PSKTAA - 02G 001, and it works only on 2.4 GHz. I need this phone to work in the 5 GHz range.
  Can I upgrade the Wifi Module in this laptop to work on the 5 GHz.

  What will work the Wifi Modules replacement?

  According to the page specification for laptop, the wireless network adapter supports 802.11 standards (b/g/n).

  802 11 B and G supports 2.4 Ghz
  802.11 N supports the 2.4 Ghz and 5 GHz and 5 GHz would be supported only in the case of the Wlan module would support 802. 11's too. But this isn't the case here

  However, you want to know if you can replace the WLan module
  Well, first of all each material change would affect the validity of the guarantee.
  This means that you will lose the warranty if you would disassemble the laptop.

  But in general the WLan miniPCI module can be removed if a removable piece.
  But the question is: would the BIOS supports the new Wlan module?
  I m not quite sure

• Satellite L50-B-192 with Linux, no compatibility issues?

  Hello world

  I would buy a new PC, almostly Toshiba Satellite L50-B-192.
  In fact, I heard that a lot of people found that it is difficult to install linux, and many could she!, any body have had such an experience?
  Would you recommend buy me this model. I'll use for some applications, graphics, programming and development.
  Any advice will be highly appreciated.

  Hello

  I think that you will have a good experience in running a late version of Linux on this model. Just trying to get a 4 core...
  The biggest problem I've seen with L50 - B, it's that the maps non - Intel WLAN don't work under Linux yet.
  But your model appear to have an Intel WIFI card, so you should be fine.
  If you download and install the kernel 4.1 I think even shortcut keys can behave very well.

  Tom BR

• Satellite L50-C-22 - update of victory 10 home win 10 Pro

  Summary: I have a new Toshiba laptop, pre-installed with 10 Home X 64 Windows and want to update, as simply and not destructive as possible to 10 Pro Windows.

  I bought my Toshiba Satellite L50 - C - 22 L last month and, overall, I'm very happy with it. He moved in with MS Windows 10 (X 64) running on 8 GB of RAM and works well. I have a couple of other machines running Windows 10 Pro and missed some additional features, so I bought a Pro product key. I had assumed that I would go to the settings screen, choose the 'Activation' option and then click the button change the product key. My new key would be accepted and the system should perform an upgrade in-place to Windows Pro 10.

  Which has proved to be a little ambitious.

  The process failed with the message "the product key you entered cannot be used to activate this edition of Windows. Please try a different key. I spoke to Microsoft and they have confirmed the key that it is authentic, but suggest it only works if I rubbed and rebuilt laptop computer with a new installation, registering the new product key to a suitable place in the build process. (This raises the question of what the "Change product key" button is a commercial copy of the OS, but that's another story).

  My question is, can I follow the instructions to create a recovery on the laptop media to recover a version of the PC factory reset, but change to include the key product Pro Win 10? If I understand correctly, if there is a WIM file as part of the recovery media, it contains all versions of Windows 10 32 - bit and 64 - bit. Installed the final version is 'unlocked' by the product key. This depends, however, how Toshiba packaged installation of recovery files and if they can be twisted this way.

  Of course, there may be a more obvious way to achieve the same goal I'm missing completely, so any other suggestions gratefully received.

  Thanks for reading,

  Steve

  Bump - no response in 3 months. Isn't anyone have suggestions?