Missing SMB connection

Similar Questions

• Not scan using Xerox Workcentre 6505 get error message of SMB connection as 031-522.

  Original title: linking a Xerox Workcentre 6505 to my computers for the analysis of needs.

  Teh printer is a printer neetwork by ethernet connecgted. Printer web interface has accepted as valid details for connections to two computers for analysis. When you try to scan to a computer, it comes up with an error 031-522, SMB connection error. I checked that each computer has a shared folder, there is a read/write permission, the appropriate IP addresses are listed and can't see what's the problem - there is little help on the Xerox support site. The network is a simple working group. I have the same printer in another office, although all computers in an SBS domain, without problem.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

• HP Envy 13-d053sa: Prints Digital scope option missing in connection options

  I got this HP Envy 13-d053sa (Win10 installed in the factory) for a few months now, always allowing me to connect using my fingerprint today.
  
  Today, I found that I had lost my PIN and my option of sign-in fingerprints had disappeared from the setting menu. I managed to set up a new PIN, but the rest available footprint (not even a flashing light on the device itself). (Incidentally, Norton Internet Security has also stopped working and I had to remove and re-install.)
  
  I've updated the device driver of fingerprints through the Web page updated HP, but still no joy.
  
  How can I get fingerprints in my connection options please?

  Yay! Restoration of the system sorted!

• Folio 13-1051nr: Missing ethernet connection (wireless)

  Hi, can someone help me with my problem?

  I just formatted my computer laptop 13-1051nr of folio to the original factory condition and now I can not find or even connect to the internet via my wireless(wi-fi) but I can connect with LAN (cable). I try to look at my device manager and I discovered that my network controller has a warning sign (exclamation point). So I'm going to the properties and details and I found this.

  Under the other devices

  Network controller:

  PCI\VEN_8086 & DEV_008B & SUBSYS_53158086 & REV_34
  PCI\VEN_8086 & DEV_008B & SUBSYS_53158086
  PCI\VEN_8086 & DEV_008B & CC_028000
  PCI\VEN_8086 & DEV_008B & CC_0280

  Unknown device:

  ACPI\INT33A0
  * INT33A0

  In the Bluetooth section:

  Generic Bluetooth adapter:

  USB\VID_8086 & PID_0189 & REV_6919
  USB\VID_8086 & PID_0189

  Can someone help me?

  Thank you

  @Lorca78

  http://ftp.HP.com/pub/SoftPaq/sp57001-57500/sp57090.exe

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55138.exe

  REO

• Problems HotSync - Bluetooth option missing in connections

  After installing Windows 7 RC, 64-bit, I had to HotSync my Tungsten E2 with Bluetooth, rather than use the cable.  I bought and installed an Azio Bluetooth dongle (and included the Toshiba Bluetooth software) without a hitch. However, when I created my HotSync options I found that I couldn't choose Bluetooth because the option was not simply present on HotSync Manager/connections.  VERY frustrating.

  Buried deep in a another thread on this forum was the solution: go to control panel | Programs, remove the Bluetooth drivers and restart.  The device is installed with the Windows drivers again.  As if by magic, the Bluetooth option appeared on the HotSync Manager Connections window and everything was good.

  Of course, some computers come with the included Bluetooth option.  For those with x 64 Windows AND have the third-party Bluetooth drivers (other than Windows) AND are having HotSync problems because there is no way to activate the Bluetooth option, the hotfix may be similar - uninstall the drivers and use the native Windows drivers instead.

  I suspect that this issue can come down more, that those who do not always have HotSynced with Bluetooth is now required to do it because they are moved to x 64 Vista or Windows 7.  Palm does not have this problem on one of their pages to support - that I could find.

  YES!  It worked for me: "buried deep in a another thread on this forum was the solution: go to control panel | Programs, remove the Bluetooth drivers and restart.  The device is installed with the Windows drivers again.  As if by magic, the Bluetooth option appeared on the HotSync Manager Connections window and everything was good."

  THANK YOU SO MUCH!

• Mysteriously missing Internet connection

  I have little computer knowledge.  Have Pavillion notebook dv6000, Vista Service Pack 1.  Wireless internet connection good for approximately 2 years with no problems.  3 days ago I uninstalled factory installed Norton Protection that was expired and free AVG and installed Microsoft Security Essentials.  
  
  Now, when trying to connect to wireless internet through Internet Explorer continually receive error message "Internet Explorer cannot display web page".  Tried Mozilla Firefox and was able to connect to internet through Mozilla a few times that same day until "Security alert" popped up and said to download a critical update.  After this update I can no longer access internet through Mozilla either--get error message that Firefox has stopped working.  
  
  While still able to connect to internet with Mozilla, I installed Vista Service Pack 2.  Windows also asked for some updates, but I don't recall what they were for.  After these updates the "critical update" alert from Firefox came up and after installing it I can no longer access internet.  
  
  Laptop shows internet connections are fine, but connection will not go through. In Device Manager, Network adapters lists Broadcom 802......WLAN and Realtek RTL.....Fast Ethernet NIC (NDIS 6.0)  
  
  Please advise as to what else I can do.  I'm considering to a restore to factory condition through Recovery Manager, but it indicates it's best to do that while "connected to internet"  obviously I can't connect to internet.  I don't have recovery disks, but in reading some materials it seems that isn't necessary.  We just recently backed up data for a different problem, so I don't need to back up anything.  Just want internet connection.  
  
  In reading many of the issues posted here, am wondering if some type of virus is attacking?
  

  My situation resolved after restoring your laptop to original factory condition.  Will post if this problem appears again.  Reading the other posts, it seems if you want latest Mozilla updgrades downloan, you must remove previous versions first or will experiment fails.  Is it possible that the same could be true for Internet Explorer?

• Missing internet connection icon

  Internet connection icon disappeared from the taskbar in Windows

  Hello

  You mean the icon network next to the clock in the bottom right.

  1 Please reboot nothing so interfere with this process.

  How to enable or disable the Notification area system icons in Vista
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  If necessary: a Mr Fixit

  System icons do not appear in the notification area in Windows Vista or in Windows 7 until you
  Restart the computer
  http://support.Microsoft.com/default.aspx/KB/945011

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Missing ethernet connection presario sr2125 uk.

  Hello, I've read through many posts here and elsewhere but can't seem to find an answer to my problem so my apologies in advance if this is seeming repetitive

  First of all, my PC is a Compaq Presario SR2125 UK.

  I recently added memory to substitute the original 2 x 512 with cards memory 4 x 1 GB. It is the only "tinkering" I did it to make it a non tech type person. Other than that, it is like it is out of the box and several years of general household use.

  My problem is that last night during a storm, we had a power failure of nature that lasts several hours and when we arrived finally be able to come back, I couldn't connect to the internet.

  The PC is on a wired connection directly from the rear via an ethernet cable in the BT Home Hub. Other devices can connect wireless to the hub, and once I had found an old Belkin Wireless adapter can this pc.  Having finally got online I spent hours reading without result.

  My pc is clean as a whistle according to Norton full scan and MBAM. It seems fair that my adapter has completely disappeared from the Device Manager, I checked in all the devices section hidden... everything. If my thought is that this little piece of kit got fried in the storm.  How it happened is beyond me given the "charge" should have go through the (?) surely first router, seemingly unharmed. My questions are...

  How to run again? or

  How can I replace it, if indeed it isreplaceable? That is, where should I look for a code of possible room or something to allow me to buy a new one, if I can

  The only other thing I can think to tell you is that I tried another ethernet cable, another Jack on the back of the hub and to tell you there is always a light at the back of pc Tower, place where the ethernet cable is plugged in.

  Really not sure what is relevant information that could shed light. Any help much appreciated even if it's just to tell me he didn't that can do anything!

  I would like to start by erasing the BIOS settings. Don't forget to unplug the machine off before doing so. The instructions are at the bottom of page HERE

  If it does not detect your ethernet, it may well have been zapped by the incident. It's a chip on the motherboard so no way to replace directly. You can add a real PCI network easily, it simply plugs into a slot in a similar way the memory. Most stores that sell computers and accessories include network cards. Just be sure to specify that you need a PCI_not the last type of PCI - E.

• missing wireless connections

  Recently, my computer pc G6 D1C14UA pavilion laptop was very slow, so I deleted a bunch of applications and programs out there. He started to work faster, but then all of a sudden my internet has exploded. I went to network connections and there is no wifi option available, and my only option is to connect to broadband. I tried to understand for hours, what is happening. the actual router is fine as I am currently connected with the ethernet cable and the wifi works on other devices, but I do not know why no network will come. I have troubleshooted networks and he says that he has no problem. When I go on my PC folder and go on managing in Device Manager > maps there a small box of yellow alert next to Ralink RT3920 802.11 bgn Wifi network adapter. I went to the HP site and reinstalled thinking I have can I have erased on the accident, but it still has a small yellow box.

  Please if you can help or give advice what to understand.

  Thank you

  Hello

  Connect via ethernet again and first uninstall the driver from Device Manager wireless and then download - install the latest version of HP support again and check...

  If it happened after a recent update, then do a system restore to a date where worked the wireless... That might help...

  Restore your computer when Windows 8 start normally

• missing firewire connection

  The version of Win 7 Movie Maker says to use an IEEE1394 cable for video input of a video camera. There is no connection of this cable on my HP p6674 computer. I tried a USB cable and it does not work. Does anyone have a solution to this problem?

  Ed

  So, I tried to use a USB cable firewire on my Surfacepro 3 with 10 coat and I get a message saying that windows does not recognize the camera to VTR mode.  The Hub reference you will allow firewire is recognized by Windows 10, and if so, where can I get one of these points of convergence?  Thank you.

• Missing network connection profile

  For my home network, network profile under 'Manage wireless networks' is no longer in effect. And I can't connect to my home wireless network. I can connect to other wireless networks, as in an Internet café or a similar place. He always seems to have the information network somewhere, I can't find it.

  A few ideas:

  • Make sure that your wireless router is enabled and functional.
  • If your computer has a switch to turn the wireless on the case, be sure that it is turned on.
  • Make sure that the wireless network connection is enabled.
  • In "Manage wireless networks", click 'Add' and create a new profile.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• My lightroom is missing not connecting no more

  For some reason, is gone to the garbisch container, I was able to return the files to my desktop but now adobe lightroom does not open any more than I can please help me I'm not good in this business, thanks

  Hello

  To retrieve the photos in Lightroom, you will need to recreate a link to them in Lightroom.

  Please see Adobe Lightroom - find folders and files moved or missing

  Concerning

  Assani

• Backup files being missed when connect you seq # go to specified

  Hi DBAs,

  I backed up my logs for archiving my pre prod DB 10.2.0.5 because my mount point was full.

  but when I gave the script below:

  Run {}

  allocate channels ch01 type disk maxpiecesize 7000 M;

  allocate channels ch02 type disk maxpiecesize 7000 M;

  allocate channels ch03 type disk maxpiecesize 7000 M;

  allocate channels ch04 type disk maxpiecesize 7000 M;

  BACKUP tag ArchLogAll FILESPERSET FORMAT of 20 ' / oracledb/oradata/DBOEM/backupset/2014_06_09/%d_s_%s_p_%p_t_%t.bkp' ARCHIVELOG

  4410 SEQUENCE UNTIL SEQUENCE 4513 THREAD 1 ENTRY DELETE;

  Ch01 CHANNEL;

  OUTPUT CHANNEL ch02;

  OUTPUT CHANNEL ch03;

  OUTPUT CHANNEL ch04;

  }

  The script was successfully run which means that archived newspapers were supposed to be backed up and deleted as described in the script of seq. 4410 to 4513.

  But when I am gone again on the location of mount point to check if they have been removed after backup... I was shocked to see that he has saved and deleted following of random numbers and many have not saved and not deleted. For example seq. 4462,4492,4511 etc. don't were not saved.

  Any problem with my script or something another bad?

  Kind regards

  Ritu

  Ritu,

  If you have any archivelogs goes to two (or more) places (defined by log_archive_dest_N where N is 1 to...), Oracle can backup and remove a copy.  If you want to remove all copies, use REMOVE all THE ENTRIES.

  Before make you a LIST BACKUP OF ARCHIVELOG FROM SEQUENCE 4410 4513 sequence UNTIL they confirm that a single copy of each archivelog (sequence) has been saved.

  See the DELETE [ALL] ENTRY documentation under backupSpecOperand to http://docs.oracle.com/cd/B19306_01/backup.102/b14194/rcmsynta009.htm#sthref141

  Hemant K Collette

• SQL developer 1.5.4 connections are missing

  When I grew up SQ L Developer 1.5.4 today all connections, was missing (3 connections). Yesterday he's been fine with all my connections. I don't know what makes the difference. No new updates, installs or changes to my knowledge.
  Thank you
  John

  Some 1.5 versions suffer from this problem. I suggest that upgrade you to the 2.1 last or at least 1.5.5.

  Hope that does not happen.
  K.

• Connection to the local network not appearing is not in network connections

  A month or so I reinstalled Windows XP SP2 (have since updated to SP3), and ever since then the LAN connection icon does not appear in the network connections window, and even when I plug the ethernet cable it does not automatically turn on the connection to the local network. My wireless connection works perfectly well. I went to the HP website to download all the drivers and also visited if the Device Manager on my computer to make sure that all drivers are in place. Even with all the drivers, it still does not connect to the local network. Help, please!

  Hi rawkous,
   
  Follow the steps listed in this article to resolve the problem:
  How to troubleshoot missing network connections icons in Windows Server 2003 and Windows XP