Satellite A100 - after only 15 minutes the WIFI connection is lost


I have a Satellite A100.
Well whenever I connect to a wireless network, after 15 minutes or if my connection is lost (each time) and I have to reconnect.
Also at this time my network icon is spent hence time is.

What can I do?



You should try to update driver wlan:

Read this number for more information:

Tags: Toshiba

Similar Questions

  • Satellite A100-233: can I use the WiFi for the Peer to Peer network?

    Me & my friend have Satellite A100-233, we cannot have network even see ourselves at the TOP unless we are in place contain the wireless Internet Modem.
    If we cannot make network peer-to-peer between us using WiFi?

    I hope you can help!
    Thank you


    I don't know if I understand your question, but you want to connect two laptops via the WLan. Am I wrong?
    Well, this type of network connection is called Ad hoc.

    Choose Start-> settings-> network connections, and then click the local network connection you want to share. On the left side of the screen under the management of the network, click on "change settings of this connection. Under the Advanced tab, under Internet connection sharing, check the box "allow other users of the network to connect through this computer's Internet connection".
    There is also a check box to allow other users to enable or disable the Internet connection, if you are so inclined. If your network doesn? t need to access to the Internet, you can skip this paragraph.

    The host system must also be configured with an Ad Hoc network connection and a Set Service identify (SSID). Right-click on the wireless icon in the system tray and choose "view wireless networks". Do NOT yet connect to any wireless network that could appear in the box. Click the Advanced button. This will bring up the Properties window of wireless with the wireless networks tab at the front. Click the Advanced Options button at the bottom right of this tab, select the option "networks from computer to computer (ad hoc) only". Make sure that the box "Auto connects to the non preferred networks" is NOT checked. Click the close (once) button to return to the wireless network tab.
    Under preferred network, click Add. You now need a SSID for this machine, which is actually the name it will use to announce themselves to the other members of the ad hoc wireless network.

  • Re: Satellite A100 - after you have reinstalled the NIC is not appear

    Hi guys

    A friend reformatted my hard drive (100 satellite) and everything is good except the card network does not appear and it is preventing connect me to the internet.

    Do I have to download the drivers for this problem, if so which ones?
    Lost connectivity doctor, this is also downloadable. Is there anything else I need to do too?

    Thank you


    Yes, I think you should download the drivers for the network card. :)

    Search on the Toshiba site. You will find all necessary drivers: decision-making supported Downloads & => Download drivers

    Good bye

  • Satellite L500 - how to set up the WIFI connection?

    I'm having all sorts of dramas trying to get my new L500 connected to the my Wi - Fi. Receipt the run around of Telstra Bigpond, then Microsoft who are charging me $80 only to tell me that I have to contact Bigpond...

    After talking with Bigpond they advised that I need to "configures Intel PROSet / Wireless" because it prevents me to connect to my Bigpond connection...

    Can someone throw some light/provide any assistance! I'm getting desperate :(

    Thanks - my email is [email protected]

    Hey nic,.

    You must give us more details about your problem. Your explanation is very deep and so it might be a little hard to give exactly the instructions how to resolve you this problem.

    First you make sure if your wireless network card is listed in the device correctly without yellow exclamation point Manager.
    Then, make sure that the WIFI is enabled with the hardware switch and FN + F8.

    You see the WLAN router if you are looking for WIFI networks at your fingertips? If so, can you connect or you get an IP address?
    Also check the DHCP of your laptop configuration and disable the Save function in the energy WLAN Vista power management.

  • Satellite Pro A210-1AZ - I lose the WIFI connection for no apparent reason

    I am connected to a wireless network with my A210-1AZ. There are 4 wireless networks in my area, belonging to other people on my street. I connect to my network, and everything seems to work fine...

    Up to an hour, I just lost the connection without apparent reason. I click on the ' Connect or disconnect ", and he cannot find + all + 4 wireless networks. I press refresh - nothing. I go to Device Manager, disable then re-enable the best to the wireless network device. Can I do "connect or disconnect", and it shows all 4 networks back. If I connect... for another hour... then I have to do it again.

    It seems worse when I use the network a lot, that is to say. Download large files, sometimes after 10 minutes. If it is fairly inactive, it lasts not more. But it always happens in an hour or two.

    It becomes really annoying!

    Please do BIOS update to the latest version. The problem should be solved.
    By the way: card WLAN that is listed in the Device Manager? Intel or Atheros?

  • Satellite L10 - 195 - could not get the WIFI connection to the internet


    I downloaded and installed the latest dirvers for wireless cards and EThernet for my laptop but I can not get the wireless to connect to the internet!
    Please help me before I crush my laptop. :]


    PS: Anyone know if there is one special way (other than the function keys) to swith the wireless on?


    This may be a stupid answer, but on my laptop there is a switch on the front of the laptop that needs to be enabled for the wireless work. I saw this as a first step, and it doesn't seem to be well documented. Good luck.

  • Satellite A100-590 PSAA9E freezes on the Toshiba start screen after BIOS update


    Yesterday, I made an update of the BIOS on my Satellite A100-590 PSAA9E 03Z00QGR with the appropriate flash: = 2 & selFamily = 2 & selSeries = 153 & selProduct = 624 & langua ge = 17 & selOS = 10 & selType = all & yearupload = & monthupload = & dayupload = & useDate = null & mode = userMachines & search = & action = search & macId = & country = all & selectedLanguag e = 17 & type = all & page = 1 & ID = 58477 & DISO =-1 & driverLanguage = 42

    BIOS -

    After flashing, the machine restarted automatically, but unfortunately it keeps now suspended from Thoshiba welcome screen. Also by pressing F2 or F12 will not change anything. It seems that the BIOS is damaged.

    I saw that in the BIOS package are delivered the two files (s10gm590.rom and s10pm590.rom) flash. But just the execution of the BIOS590MP.exe SanAntonion10 a .vbs script starts decides which automatically selects and loads a flash file. Maybe she chose the wrong?

    What should I do now? Is there a way to restore the BIOS, or do I have to send my laptop?

    Thanks in advance



    sounds are really serious. Unfortunately, I can just give you the only clue you will get with each user here in the forum:

    Find the nearest authorized service partner (you can find one by using this link:
    and bring your machine. In addition, you must explain the guys what happened so they can do something for you.

    Good luck buddy

  • My iPhone freeze with grey screen, then restart only. Subsequently, the Wifi is not available, I have to finish manually restart.

    My iPhone freeze with grey screen, then restart only. Subsequently the Wifi is not available, I have to finish manually restart to be able to use the Wifi. I have restart my internet and network settings, but the problem is still there.

    Hi there Turco911,

    Looks like your screen goes gray and then shuts down its own, and you must manually restart to get the wifi to work again. I save your device in iTunes, then restore it like new and verify that it works.

    How to clear your iOS device and then set up as a new device or restore from backups

    If this is the case, restore your backup either check it still works and just reinstalled software or circumvent the problem in the backup file itself.

    If when restored like new the problem persists, I would ask for your phone service:

    Repair - iPhone Apple Support

    Thank you for using communities of Apple Support, all the best!

  • After a few minutes, the screen goes black on Windows Vista

    Title: power original economy

    I wish my screensaver runs while I'm not using my computer, but after a few minutes, the screen becomes black until I move my mouse again. How can I stop this?

    Thanks, it was just a matter of adjustment of the power to the right thing!

  • Error message: device is ready for use, and after a few minutes the error message "hardware Id missing.

    Original title: hardware Id missing

    I recently acquired a voice recorder HccToo 8 GB. However, whenever I connect it to my computer I get a message saying that the device is ready to use and after a few minutes the error message "hardware Id missing.
    The usb cable that connects to the camera has no problem (and should be universal). And I tried to connect to other computers on win 7 with the same results. I also watched online solutions, but this problem seems to apply mainly to phones.

    I would be grateful for any advice on what I can do about it.

    Hi Nikolai,

    Sorry for the late reply.

    Did you try to connect other USB devices and check the issue?

    If problem persists, try the steps to uninstall the USB Device Manager, uninstall the drivers of device from the list of programs, and then download the latest drivers from the manufacturer's website.

    Step 1:

    Uninstall the device from Device Manager

    • Open the Device Manager
    • Expand the USB section.
    • Find the USB device.
    • Click with the right button on USB and select Uninstall.
    • Select the check box delete the driver for this device.
    • Restart the computer after the uninstall is complete.

    Step 2:

    Uninstall the drivers of device from the list of programs in the control panel

    • Click Start, select Control Panel
    • Now, click on programs and select programs and features.
    • Find the USB.
    • Right-click USB driver and select Uninstall.
    • Restart the computer after the uninstall is complete.

    Step 3:

    Download and install the latest drivers for the USB on the manufacturer's Web site

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • When you watch a movie on netflix after that 10 minutes, the screen turns white

    original title: when you watch a movie on netflix after 10 minutes, the screen goes white, I can hear the movie but not see it. How to stop going empty?

    When you watch a movie on netflix after that 10 minutes, the screen becomes white, I can hear the movie but not see it. How to stop going empty?

    If I move it, it comes back. I went to personalize and click never. I know you if it's ok now!

  • I've never seen the cloud on my watch symbolizing the wifi connection.

    I've never seen the cloud on my watch symbolizing the wifi connection. How to operate when phone and shows are on the same network?

    Hi, Kristian

    If your Apple Watch is not connected to your iPhone via Bluetooth, but it is within range of a WiFi (2.4 GHz) network your iPhone plugged in the front (while it was connected to your watch via Bluetooth), then your watch can connect to this network and still offer some features:

    To check the status of the connection of your watch, go to the eye of parameters:

    • When displaying the time on your watch, slide up on the screen, then swipe left / right for the look of parameters.
    • This will specify connected or disconnected:
      • If it says connected and the icon in the upper right corner is a green phone, your watch is connected to your iPhone via Bluetooth.
      • If it says connected, the icon is a green cloud, then your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
      • If it is disconnected, your watch is disconnected from your iPhone and also is not connected to a Wi - Fi network. The icon in the upper right corner will be a red telephone with a line through it.
    • Slide down again to return to the watch face.

    To test whether your watch is currently able to connect to a Wi - Fi compatible network known as a relief:

    • When within range of the network, turn off Bluetooth on your iPhone.
    • After pausing for a short time, check the status of the connection of your watch as described above.

    More information:

    On Bluetooth and Wi - Fi on Apple Watch - Apple Support

  • Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

    Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

    WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

    Try the following steps please

    The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

    1. Check if the problem is related to a single device and if other devices connect normally-
    2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
    3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
    4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
    5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
    6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
    7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
    8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
    9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.
  • ConnectionFactory cannot create the WiFi connection

    I tried this code example, and it returns null ConnectionDescriptor when I only have the wifi connection:

    cf = new ConnectionFactory();
    cf.setPreferredTransportTypes(new int[]{
    ConnectionDescriptor descr = cf.getConnection("");
    StringBuffer buff = new StringBuffer();
    if(descr == null){
        buff.append("no descriptor");
        buff.append(descr.getTransportDescriptor().getTransportType() + ";" + descr.getUrl());
        try {
        } catch (Exception e) {
            System.out.println("===>conn close error:" + e.getMessage() + ";" + e.getClass().getName());

    I tested with the mobile network and it works well and returns the connection descriptor non-zero but when I try with the wifi only and always returns null.

    I tried to access on the bb browser and it opens.

    However, the connection is slow and it loads for a while before opening google. Is this the reason why I get null handle or its something else?

    Well I solved it.

    It turned out that I had activated the VPN profile to the wifi network. When I disable the code works ok.

    But this raises the question why can't make a connection http via wifi with active VPN profile. I can always open in the browser.

    I'll make a new thread for this question.

  • BlackBerry Smartphones BB Curve 9300 - how to prioritize between the Wifi connection and the carrier?

    Hi all, I have a question... How do we place on our BB unit to plug into a wireless network from first (if available) to browse and not them connected to the internet all the stuff instead of using our carrier, then at home or at work?

    There are no parameters for this on most devices, the WiFi connection will ALWAYS be priority for communication of data via the connection to the mobile network.

    Some rare machines with capacities AMU have an Option to set this priority. UMA is a service of only a few mobile providers like Tmobile.

Maybe you are looking for

  • How can you correct in 9.2.1 iOS game Center?

    I need help with Game Center to work in 9.2.1 update games running Game Center does not work and I can't go to the app itself because it just freezes. Same thing when I go into settings of anything other than the last image before I hit the icon... I

  • Faster CPU for a T400?

    Can someone tell me what is the fastest CPU, I can put in my T400? Thank you.

  • HD replacement, replacement of BONES need help

    Long story - Compaq HD is dead, must be replaced.  It is a delivered computer pre-loaded with all the software and no physical CD, although I did the recovery disks that I was supposed to, but I am told that they are not good for a change of hard dis

  • Installation of money & problem running

    Runs a new copy of Microsoft Money 2005Problem Description: I have been a user of Microsoft money since the mid-1990s and have obviously accumulated a lot of data to archive. In 2005, I updated to the Vista operating system and bought a copy of money

  • Setting warning "setting Hibernate mode is not enabled on this computer"

    For some reason, a week before, my Vista (Home Premium/32 with all patches) keeps telling me that my computer has failed the hibernation.  I'm really worried, because I only use mode anyway (my computers are on 24/7), but I wish you to stop this sile