Satellite L50D-C-18J - two modules of RAM but single track only

Similar Questions

• Satellite A100 - 847 PSAA9E - 4 GB of ram, but it reads only 3 GB Win 64 bit

  I have the laptop A100-847-PSAA9E-0R101QAR and I have 4 GB of ram installed on it.
  Yesterday, I installed Win7 64-bit system but when I check the properties of the computer, I see only:

  Installed memory (Ram): 4 GB (3.00 GB usable)
  System type: 64-bit Operating System

  What should I do to use my full 4 GB of ram?

  Hello

  To be abele to use 4 GB of RAM, three components of the laptop should support the 4 GB.

  -OS Win
  -Chipset
  -BIOS

  If one of these parts would not support 4 GB of RAM then you will not be able to get full access 4 GB.

  You use Win 64 bit that s ok so now only the chipset or BIOS can cause this problem
  Check the chipset and the Intel page research if the chipset is 4 GB of RAM capable.
  If the chipset would be 4 GB RAM capable then the question is releated to the BIOS.

  Good bye

• Satellite A100-014 can't module of RAM PC2-4200 or PC2-4300

  Hello guys and girls,

  I have two modules of RAM memory installed on my toshiba a100-014. They are the two PC2-4200. However, CPU - Z which is a small software that helps out to discover what are the specifications of the hardware on your computer, says I have two PC2-4300. Isn't it funny?

  Why you think that CPU - Z does not recognize the RAM modules I have installed? Moreover, the machine works perfectly!

  Hello

  This software is not for me. I use Everest professional. It s also a hardware diagnostic application.
  But you the modules of RAM. Satellite A100-014 has been delivered with a module of 1 GB DDR2-533 (PA3411U-2M1G) and it s definitely a PC2-4300

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• Satellite A200 PSAFCA-01H00J upgraded to 4 GB of RAM but can see only 3 GB

  Hello

  * UPGRADE RAM PROBLEMS *.

  I just upgraded my laptop from 2 GB to 4 GB of RAM, * but cannot access the 3 GB *.
  I checked all the documents, and he indicates that the laptop should be expandable to 4 GB of RAM.

  Oddly enough, the site of [mytoshiba.com.au | http://mytoshiba.com.au] does not list my exact model under "abandoned" (as if it never existed!). Although there are a number of similar models according to [http://www.mytoshiba.com.au/web/resource/pdf/discontinued-models/notebooks/satellite/satellite_a200_psafca-01k00j.pdf]

  _OTHER WINDOWS7 64 BIT PROBLEMS_

  I also added a larger HARD drive (the original HARD drive wasn't @ ~ 19 months-) as well as a fresh install of Win7 Ultimate (64-bit).

  I have the Toshiba site and updated 64-bit drivers as much as possible, including the BIOS to Mw10M520.ROM using winphlash64 downloaded on the net, the included winphlash (32 bit) of toshiba did not work as I have already installed Win7 (64).

  Incidentally, I always have problems with "Toshiba Password Utility monitoring" and the software "Driver Bluetooth software" provided by Toshiba to [http://www.mytoshiba.com.au/support/notebooks/satellite/a200/psafca-01h00j/download] - in the absence of "* Win7 64 * ' drivers I used the ' * Vista 64 *" drivers. Is this a problem?

  According to my system info:
  My Chipset is * chipsets Intel® 945 Express Chipset Family *.
  My CPU is * Intel(R) Core (TM) 2 CPU T7400 @ 2.16 GHz 2.16Ghz*
  Installed memory is * 4.00 GB (3.00 GB usable) *.
  System type is * 64-bit OS *.

  What Miss me here people? Help please :|

  Hi mate

  Please check this page of specification Intel chipsets Intel® 945 Express Chipset Support function
  http://www.Intel.com/assets/PDF/datasheet/309219.PDF

  + _1.4.2 system memory account Support_
  + Takes in charge single-channel DDR2 SDRAM only.
  + Memory maximum support 2 GB +.
  + Channel memory Topologies taken in charge: +.
  + Single channel with 1 single SO-DIMM (up to 1 GB) +.
  + Single channel with 1 SO-DIMM (up to 1 GB) and down (up to 1 GB) of memory.
  + Support for DDR2 400 MHz and 533 MHz +.

  As you can see, the Chipset Mobile Intel 945 Express charge max 2 GB of RAM. This means that 4 GB of RAM would not be taken in charge and this is perhaps the reason why only 3 GB of RAM are visible

• Satellite A200-1hv - 4 GB of RAM but system see only 3.1 GB

  Hello

  I have the problem. recently, I bought 4 GB of RAM for my Satellite A200-1hv but system see only 3.1 GB.
  And yes I have tested also on 64-bit vista 64 and Linux 64 systems. In both cases, it shows only 3.1 GB.

  Also when I boot my laptop on the BIOS POST screen it test only 3.1 GB of RAM memory not 4 GB.
  The funny is that when I enter in the BIOS setup, and then in the main settings tab, it shows 4GB.

  Why?
  In the specification, it is written that this laptop supports 4 GB of RAM, but it is NOT!

  BR
  LMAN

  Have you tried to update the BIOS?
  Please do!

  Check if you are using the latest version, and if not then update the BIOS to the State.

• HP 1000-1312tu had installed 6 GB of ram, but it shows only 929 usable

  my laptop running windows 7 ultimate x 32 .intel (r) Pentium (r) @2. 40 GHz I have 6 GB of ram installed and usable only 929. I already tried many things and I can't do bugs... Please help me

  Hi @minxfiles ,

  Welcome to the HP Forums!

  This is a good place to find answers and advice!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have 6 GB of ram and it is only readable 929 reading.

  Just to be sure you're correct DDR3 ram installation?

  Installing the chips of RAM, they must be of the type suitable and properly matched.  You can have 2 @2 for 4 GB of ram or 2@4 GB to 8 GB of ram. To have 6 GB of ram, you would need 1@6 GB to 6 GB of ram.

  If you have added a 4 GB of ram with the original 2 is it came with, it is very likely what is causing the problem.

  Good luck!

• Satellite L30-113 does not recognize the two modules DIMM RAM

  Hello

  I have a Toshiba laptop Satellite L30 113.
  It has 512 MB of RAM and therefore struggled to run Windows Vista, so I bought another 1 GB of RAM.
  It's DDR2 553 MHZ (PC4200.

  The problem I have is that the laptop does not recognize both DIMMs, i.e. the old 512 MB and the new 1 GB when they are in the whole PC. I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB. I tried the DIMMs around two ways but without success.

  Did I miss something?
  They should be the same size as in the bad old days?
  What is going on?

  Thank you

  Adam

  > I tried the two DIMM individually in both slots and there is no problem, but when I install both the system sees just 1 GB
  Seems that the two RAM modules are not completely compatible...
  I've read several times on these issues and to be honest it s are not uncommon

  I advise you to buy two identical RAM modules ad then to try again

  I'm afraid there is no other solution for your problem of m.

• Satellite L350 - BSOD with new modules of RAM

  Hi, I have a Toshiba Satellite L350, it helps to have a memory of 2 GB 2 x 1 GB (PC2 5300 s)
  Now I bought 2x2gb (PC2 5300 s) to get a 4 GB and installed them both, but when I turn on my laptop I get the BSOD with Driver_IRQL_Not_LEss_OR_EQUAL error with ataport.sys

  Address 814A2AE1
  81499000 base
  datestamp 49ee8a3a

  Running Windows 7
  The two 2 GB cards memory sticks works fine individually but

  Any help would be welcome. Thank you

  Hi mate,

  What new RAM modules that you have bought exactly? For the moment, I think that they are not compatible together and so the BSOD appears. I think you have to use other RAM modules if want 4 GB of RAM.

  Also if you run a memory diagnostic tool like Memtest86 doesn't it displays an error if you use the new modules?

• Satellite L650 - 1MC Windows doesn't recognize RAM but BIOS is...

  My laptop has the following memory configuration:

  1 x Samsung 2 Gb module (which was the original module supplied with the notebook)
  1 x Kingston 4 GB module

  The BIOS recognizes all of the 6 GB, it says ' total memory size: 6144 MB '

  However, Windows 7 (home premium 64-bit) "6.00 GB (2.0 GB usable)"

  I have been told it is perhaps down to a serious virus - I did a complete analysis of the MSE, that is something of which I removed, however it says that 2 GB of RAM is usable.

  I tried to go into msconfig/startup/advanced and change the maximum memory of 2048 to 6144, but this just changes again in 2048 Mb.

  I would be really really grateful for any help with this.

  Thanks :)

  Thanks for the comments. ;)

• Satellite Pro A120 (PSAC1E) 4 GB of RAM but 3.3 GB recognized

  All,

  I upgraded my laptop memory 4 GB 2x2gb modules.
  However, it seems that the system recognizes only the total memory than 3318 MB!

  Although it is said that this model is able to extend memory 4 GB, it seems that this is not the case.

  Has anyone else he had a similar problem?
  I have run many tests on modules and fix them with 1 GB module and both works fine.
  This link for my laptop Toshiba: http://uk.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=123515&DISC _ MODEL = 1 & service = UK

  Thank you

  Kav69

  Yes, there are more people who have only 3.3 GB instead of 4 GB of RAM.
  Do you know why?

  Due to the limitation of the 32 bit OS!
  Have you heard that abut?

  Isn't it? Well, all operating systems are 32-bit can handle only 3.2 GB.
  Check the Microsoft page for more details!

• Upgraded Satellite Pro A200 - 4 GB of Ram, but I have only 3 GB

  I have a satellite Pro A200 and I uppgraded from 2 to 4 GB of Ram.
  It was not a problem as long as I have didn't ' tt start Windows Vista.

  In the back when the memory is counting upp there are 4 GB (40XX something) but when I loggen into victory. There is only 3 GB left.

  Whence my A200 Sat stuck the other 1 GB?
  I have now that the graphics card takes upp to 250 MB, but there are still some 750 GB is not there?

  Is there anyone who can help me and solve this problem, I'm just 100% satisfied with my A200 but it buggs me that is missing 750MO I SEAP for.

  Hey Buddy

  For several years he s already known that the Windows 32 bit doesn t recognize all of the 4 GB due to the limitation of the 32 bit OS.
  I think you should visit the Microsoft good, old for details ;)

  For example this one:
  http://support.Microsoft.com/?kbid&ID=929605

  Best regards

• 64 bit computer 8 GB of RAM but windows shows only usable 3.25

  OK, I got the original 6GB (3x2gb) RAM (1600), installed on a MSI 880GM-E43 motherboard and a Phenom II X 4 (I think either 3.6 or 4.0 Ghz) and windows all read well. I buy a new motherboard Gigabyte 970 a - UD3 and another key to 2 GB RAM and install. Now when I go to windows, it says properties

  "Memory (live RAM) installed: 8.00 GB (3.25 GB usable). So firstly that I went into the BIOS to check if it shows the correct information and he did. Then I changed my CPU speed clocked 3.4 to 4.0 Ghz. I loaded windows and he always says the same thing "memory (RAM) installed: 8.00 (3.25 GB usable)" and now, the processor has not changed either "processor: AMD Athlon (TM) II X 4 965 3.40 GHz processor". " I even reinstalled the new drivers and it still shows the same info.
  CAN ANYONE HELP!
  Specifications of the computer:
  Windows 7 Home Premium - 64-bit
  AMD Phenom II X 4 - 4.0GHz
  Kingston HyperX Blu 8 GB (4x2Go)
  Gigabyte a 970 - UD3
  VisionTek Radeon HD 5750

  Strangely, even if the memory is entered correctly, it stil reports way less. Don't know why but files seems to correct the problem...

  No doubt you are overclocking... 'Properties' always reports the chip actually, not the speed it is running at a time. Was it to do, it is time when your chip would show at 800 mhz... waaaaaaaaaaaaaaaaaaaah... :-)

• I have 8 GB of RAM, but computer shows only 2 GB as usable. How can I get the computer to see the other 6 GB?

  Installed 8gbs of windows 7 on a dell xps700, usable 2gbs RAM. How can I get the computer to see the other 6gbts.

  Original title: usable ram

  More than 2 GB says:
  http://support.Dell.com/support/eDOCS/systems/XPS700/en/SM_en/specs.htm#wp1057323

• Can I use a module of RAM 2 GB in Satellite M105-S1021

  My TECRA stopped with the BSoD (on another thread) and I had to leave my old Satellite M105 - S1021 and try and get it going again.

  First problem was running PRO XP without service pack and it was a * LEGAL * XP home upgrade - tries to install the SP, I received the product key was not valid message - cannot find the CD of XP Pro I used I called MS Support (sounded like in India) and vain - I expected to be provided with a valid key BUT NO! Why MS play the stupid guys like that on a software product is stupid IMHO and brief overview just puts a bad taste in the mouth and make me want to go to UBUNTU LINUX.

  So I had to search in a room full of hardware and PC (sad hoarder I have still a few BACK/WIN 95/98 machines) until I found a CD of XP PRO with a product key if I had XP PRO installed on this Satellite laptop and installed the latest SP

  BUT then I discovered that this laptop as well as it having previously PRO XP without a service Pack installed, there only 448 MB of RAM installed.

  Looking at the memory Crucial site they recommend an upgrade to 2 GB BUT it's 1 GB x 2. Opening the door of memory I see that I don't have that one not slot the two connectors.
  An upgrade to 2GB created using two modules of 1 GB Mem is therefore not possible.

  So my Question is:
  Can I upgrade to 2 GB using a slot OR slots on this L/T only able to take modules 1 GB Mem - I guess as I can / could get a module DDR2 PC2 - 5300 Mem.

  OR only can I put in a single module of 1 GB Mem.

  Can you please first tell us we are discussing here on laptop Tecra or your old Satellite M105 - S1021?

  For the Satellite M105-S1021 I found follow the news:

  Memory5
  -Configured with 512 MB DDR2 533 MHz SDRAM (using a memory module, a memory xpansion open housing)
  -256MB (min) / 2048MB (max), 512 MB of memory accessible service more accessible by the user memory available slot for 256 MB, 512 MB or 1024 MB DDR2 PC4200 533 MHz SDRAM.

  Compatible memory modules:
  PA3412U - 2M 51 Toshiba 512 MB DDR2-533 memory Kit
  PA3411U-2M1G Toshiba 1 GB memory DDR2 - 533 Kit