Satellite L555-11U & L555-12V: FALLOUT 3 does not---> Solution

Similar Questions

• Satellite T130-11u with Intel CPU Q300 does not start

  Hello

  I installed a Q300 240 G in my T130 LU.
  It does not start.

  I tried to use the restore disks, everything went well.
  But it's boot after that... it's LAN check while the boot device is set to Q300.

  I tried with a Windows disc.
  It says that the disk is locked and I need to unlock it. (Messages are in French).

  I forgot something?

  Concerning

  Jean-Luc

  Automatic response...

  I managed to get to start.

  I had to put:
  "Exectute-disable bit capability" to [Disabled]
  "Control" mode SATA [compatibility]

  After that, I managed to install the system and start (most important) it.

  Once the system was working, I have reset these entries to the normal configuration without any adverse effect.

  Concerning

  Jean-Luc

• Satellite P200 - Product Recovery Disk 2/2 does not work

  Hello

  because my laptop (Satellite P200 - I bought in December 2007) does not work more properly - and when, after a lot of cleaning it still wasn't working properly - I decided to start from the beginning and restore the operating system with 2 product recovery cd / dvd.

  Recovery disk 1/2 worked well - Windows Vista Home Premium product is loaded again on my computer.

  But what abot * Disck2/2 product recovery? *
  At one point, the recovery program calls for a 'supplement' but when I put in the product recovery disc 2/2 at this time, that the program does not recognize the disc. During the rest of the recovery program the program didn't ask for Product Recovery Disk 2/2, so the content of this CD-ROM/dvd now is not loaded on my laptop.

  Someone had this problem too?
  What do you have on this?
  Is this a problem for not loading the content of the product recovery disc 2/2 (I can go without it?)?

  Thanks in advance for any response!

  Artisans

  Post edited by: craftsmen

  Hello

  > Products 1/2 worked well - Windows Vista Home Premium recovery disc is loaded again on my computer.

  I put t know which modules the tool called for, but AFAIK the Toshiba image contains the operating system Vista, Toshiba drivers and additional software.
  So if you've recovered the laptop using the recovery disk Toshiba 1 then the laptop must be set to the SAME State as at the first day of the purchase.

  PS: what files you can find on the second disk?

• Satellite L555-12V - Touchpad isn't using Win 7 64 bit

  I bought the laptop with Windows 7 home premium.
  Then I installed Windows 7 ultimate 64 bit and my touchpad doesn't work.
  I've tried everything. I have the original drivers for 64-bit

  When I do the auto detection on the Toshiba page it shows me that I have a Satellite A200-17O. :/

  Sorry for my English :D

  MFG

  So, what laptop you have exactly?
  Satellite L555 or Satellite A200-17O?

  Have you checked the Device Manager if the touchpad would appear as unknown device or devices implemented with a yellow exclamation point?

  I think that it s driver related issue but to my knowledge the touchpad should work and you should be able to use even the drivers have not been installed.

  Have you checked if the touchpad is not disabled? Check it out using the FN + F9 option

• Noise noisy fan on Satellite L555-12V

  Two days ago, I bought L555-12V to MediaMarkt. The fan noise is terribly strong.
  The fan runs at 70-80% with a CPU load of only 2 or 3%, surfing with firefox and not other open programs.

  It looks like a hair dryer. It is so strong that you can't stand to be near the laptop for more than 10 minutes. It is therefore impossible to work with.

  I've tried everything. Uninstall unnecessary software, changed Windows power profiles, changed the Toshiba Power Saver Settings; on maximum performance, that the fan never turns market optimized battery fan is off for a minute then on incredibly strong 80% for one minute, and so on. Power switch.

  Is anyone else having these problems with the fan noise?

  Is this the same problem as A500 owners with 1.20 BIOS on their machines?

  Will there be an update of the BIOS for L555-12V as there was of the A500?
  This cured for lack them of fan noise. At the present time there is no new BIOS posted on the support page.

  If this isn't the case, I'll have to take the laptop return it for a refund. I find a shame as the laptop seems also very well. However, this machine is unusable for some time in its current state.

  > changed the Toshiba Power Saver Settings; on maximum performance, that the fan never turns market optimized battery fan is off for a minute then on incredibly strong 80% for one minute, and so on. Power switch.

  maximum performance means that the cooling modules would go to full power. This means that the fan is always running!

  optimized battery means that the cooling fans will start to run only if the temperature would reach a certain level, which is why cooling modules is triggered if the temperature would be reduced and would begin again if the temperature level would increase

  > Will there be an update of the BIOS for L555-12V as there was of the A500?
  Who knows I checked the page pilot European Toshiba and didn t find a BIOS update for L555-12V (PSLWSE) series I found a BIOS for the PSLW8E series

  However, I think you should wait a bit and must check the driver page in the next time that maybe new BIOS would be available

  Welcome them

• Satellite Pro S500-139 - FN + F9 key does not have to turn off the touchpad

  Hello

  I use a Satellite Pro S500-139 and am having problems with my F9 key. When I tap my palm touches the mouse and send the cursor somewhere else on the page. I reinstalled the ALPS pointing device and now have access to the Advanced setting that I was not able to get.

  Although I can set the sensitivity etc. I would really be able to use the shortcut to disable the mouse momentarily while typing. My keyboard shows that, if I press fn and F9 the i should be able to disable the mouse but the function does not work. F9 all other functions seem to work.

  Do you know if there is a solution to this?

  I am running windows 7 pro 32-bit service pack 1.

  What you can try is to reinstall extra package from Toshiba.

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• Satellite M70 - 181 - slider and escape key does not

  FN with F10 keys shows no reaction.
  Check all the drivers.
  But cursor and escape keys does not.
  Need help please

  Joe

  As far as I know, FN + F10 or FN + F11 active integrated keyboard and cursor control keys.

  Satellite M70 is a fairly old machine and I do not remember which driver may be responsible for this control. Try to reinstall the Toshiba Accessibility or FN-esse utility. Maybe this will help.

  I had M70 long ago, but I've never used this option.

• L50-B-2FN satellite: select the keys on the keyboard does not

  Hello

  I have a Satellite L50-B-2FN, bought just five months ago (February 2, 2016), and apart from a problem recurring with the lid doesn't close does not correctly, I now have a hardware problem: the keyboard stopped working fully, with most of the numbers keys does not respond as well as the letters R and Y.

  I checked the keyboard configuration and drivers via Device Manager and the computer tells me that everything is working properly and updated, but this is clearly not the case. I tried Toshiba's own online recommendations: uninstall the keyboard (http://support.toshiba.com/support/t...TYPE=COMPUTERS) and a restoration of the system to the last automatic (http://forums.toshiba.com/t5/System-...10/ta-p/657989), but neither solves the problem.

  What I understand online forums, like thi keyboard problems are a problem common _very_ Toshiba satellites, especially those running (or update of) Windows 10 (mine came with Windows already installed 10). He, however, seems to be a clear or coherent solution. Can anyone help? Apparently the warranty on this unit (serial number, part number) expired on December 1, 2015, so even if I only bought it from the store on 2 February 2016, he is not covered - otherwise I would request a replacement, especially since the problem with the lid doesn't close does not correctly too...

  Thanks in advance, Martyn

  Hi - suddenly a similar probs with Tosh laptop Satellite... 2, w, s, and c keys do nothing. Upgrade to Windows 10 about six weeks ago... any ideas please? /

• Satellite L505 - decimal button and '8' pad does not

  Hello

  My buttons decimal and 8 on the numeric keypad of my laptop does not work. It seems to work after a few minutes of bashing alt + ctrl + shift + fn + keyboard arrows keys, then as soon as I move away from my computer it stops working again. does anyone have the solution button to turn on? also, does anyone know how to disable this?

  Thank you

  > can someone give me a link for the drivers for the keyboard? satellite l505d? I can't locate them.

  Keyboard drivers are part of the Windows operating system. You can not download this driver separately
  Usually, if remove you the keyboard from the Device Manager, then reboot again, the Windows operating system should recognize and automatically install the keyboard driver.

  > the key 8 has worked now... I was just overwhelming the shiftaltctrlarrows buttons.
  But it seems that the buttons work now

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• Satellite P50-A-144 - FN + z key does not work after update Win8.1

  Hello
  a couple of months ago with windows 8, which became 8.1 with w. update, I bought PC toshiba laptop SATELLITE P50-A-144.
  Since then, fn + z key does not work, it says that light keyboard turns off whenver I press it.

  How could I solve this problem? It's my OCD tingle.

  Thanks for all the replies :D

  Strange. Something like that shouldn't happen. I updated my machine, but everything works fine.

  I don't know if this will help, but try to reinstall the driver of Toshiba system and function key utility Toshiba.

  You should find it on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
  Check it out.

• Satellite L650-11R - broadcom WLan 802.11n does not

  Hello!

  I had some problems with my internet and everything trying to solve this problem, somehow I uninstalled my network card and its drivers.

  After that (I reinstalled several times), unit is here, but it says in Device Manager that is activated, but when I go to the device in network settings, it says that it is diseblaed and its painted in grey (I clicked, window opens saying "enabaling"... but nothing happens after that). Also, I know that of not work beacause it does not find my home WIFI network and other devices in the House are connected to the home network. In the right corner of the screen there is red ' x'.

  Also, when I run windows repair to see what is the problem of network it says that my network card is probably bad drivers and I should change that.

  I tried a lot of drivers for broadcom 802.11n on the internet, but nothing seems to work.

  My laptop is Toshiba satellite L650-11R
  network card: broadcom 802.11n
  am on Windows 7 64 bit home edition

  Help me to find drivers or tell me how to install correctly with corect NIC drivers.

  Please help, thanks in advance!

  I solved my problem. All the drivers that I tried to install worked

  The real problem was antivirus, I uninstalled Zone Alarm security and now I have internet!

• Satellite A300 - dvd, usb and card reader does not work

  Help needed please.

  Have a laptop Satellite A300, running vista.

  Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it. The card reader can't find anything on the card (and Yes, the card was full.)

  The usb scanner is recognized as an external memory card and the other usb port does not fuction.

  I have not installed or don't remember changing of settings or do whatever it is the habit.

  Any help or thoughts would be appreciated.

  Hello

  Your ad is very confused.
  > Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it.
  Well, there are several reasons for this; It would be possible that the inserted disc is not completely compatible. Try different drives from different manufacturers.
  It would also be possible that the STRANGE laser lens is dirty. In this case, you might clean using a cotton ball and alcohol tip. In my case it helped.

  > The card reader can't find anything on the card (and Yes, the card was full).
  Did you use a compatible card? The laptop runs these cards:
  8MB - 2 GB SD card
  SDHC - 4 GB card
  -16 MB - 2 GB xD Picture card
  Memory Stick - 8MB - 256MB
  Memory Stick Pro - 256 MB - 2 GB
  MultiMediaCard - 8 MB - 1 GB
  miniSD (with SD adapter) - 32 MB - 2 GB

  I recommend also to format the card and to copy files from computer, and then test this.
  You can also reinstall and update the driver for the card reader controller...

  > The usb scanner is recognized as an external memory card
  Can't believe that you must use a scanner software (must be provided with the scanner) and have to test this unit. By the way; for the most part a scanner driver must be installed in order to use this

• Satellite A305-S6858 win XP video driver does not

  I recently bought a Satellite A305-S6858 in the States and I went down the Edition Vista Home premium preinstalled
  for Win XP 32 sp 3. I had several problems to lift the computer up and running. After reading several posts
  on various forums, I managed to install the OS, but I still cannot use the Intel video driver.
  After the installation of those available on the toshiba site I still have in the Device Manager under the node for the video card
  2 entries for 965 Chipset Mobile with an exclamation point.
  I recently discovered that not having is not the video driver installed the operating system does not allow Stanby and Hibernate power options.
  If someone has stumbled in the same issue?
  Thank you

  You must install the basic drivers first.

  Try to install the driver for the Chipset Intel first, then the display driver.