Satellite L640 - Eco Utility does not work

Similar Questions

• Toshiba Eco utility does not work

  I bought a laptop with the following characteristics:
  Model name SATELLITE L750
  Version of the OS Microsoft Windows 7 Home Premium Service Pack 1 6.1.7601
  BIOS Version 3.30
  CPU Intel Core i7-2670QM CPU @ 2.20 GHz
  Memory6144MB physical RAM
  Hard drive Capacity749, 725, 540, 352 [bytes] 698.236 [GB]
  Video NVIDIA GeForce GT 525 M version = 8.17.12.9551

  Unfortunately, I have several problems (mechanical and software). I need help on startup TOSHIBA ECO UTILITY that no longer works. I have re-installed and it still the same situation. He activates the Eco Mode "Off" radio button and when I try to push "on" it crashes and says "Error has occurred in TOSHIBA eco Utility. He'll leave the application. Any suggestion?

  I put t know if this will help but please try to reinstall Toshiba Value added Package and Toshiba ECO utility. Remove both the system, restart your computer, clean using CCleaner registry entries and then reinstall the VAP and ECO utility.

• TOSHIBA eco Utility does not work and I have not changed anything

  So far the software worked but now it doesn't. When I try to turn it on it says "an error has occurred in the TOSHIBA eco Utility utility. The application will now exit"(an error occurred with the TOSHIBA eco utility. The application closes. Do I need to uninstall?

  Hello

  I am finally found the solution:
  Open Toshiba Assist

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• Satellite A10 S203: sound does not work - just enough

  Hello!

  To my satellite A10 S203 sound does not work, I updated my sound card and the bios but nodifferents. Nothing in the system that says that I have something wrong whith my sound is just enough. I tried speakers headphones and challenging systemsounds, mp3, Auidi direct works cd... nothing.

  Any tip?
  [email protected]

  First check the status of the sound card in Device Manager.
  If there is a yellow climbing brand then you should try to reinstall the driver. (first remove it and after reboot, install a new)

  Have you checked the volume setting and the site of laptop? Eventually he s a very simple idea, but believe me, I read many comments here in the forum and a lot of guys forget this option simply.

• Satellite L300 (PSLB8C-0H901X) does not work

  My laptop Toshiba Satellite L300 PSLB8C-0H901X, does not work, no power, no MESSAGE, nothing, lamp power and charge Get when pluged into anything else, any known issues? All the fixes, thank you in advance for your help.

  Of course, your laptop is completely dead. In such situation, there is no magic solution and I m afraid that you need professional help. If there is absolutely no reaction is maybe defective electronic power supply and the motherboard must be exchanged.

  As you know this is part more expensive so you need to check if this is the solution for you.
  Call, explain the situation and let it check your laptop.

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• Satellite M40-307: accessibility utility does not work with the limited user account

  Hello everyone,

  I have a Satellite M40-307 (PSM44E), and I had a problem with the utility "accessibility", which displays an icon in the notification bar of Windows XP, to inform the user if the "Fn" key is active or not.

  This utility would not work for the administrator would not worry so much, because the administrator is supposed to know what he does. But the limited user doesn't have access, that bother anymore.

  In Administrator, this utility works quite well. But during a session of limited user, if I try to launch it in [runas / user: admin "C:\Program Files\TOSHIBA\Windows Utilities\TACSPROP.exe"],
  I am replied that the file TCMSVR. DLL is not found. If I launch normally, a message tells me that this utility requires that I am logged on as administrator.

  So, what can I do to use this utility normally, i.e. in a limited user Sessiona? *

  Hello

  Well, you should try to activate the rights for the TACSPROP.exe.
  To do this, you must enter the operating system as an administrator.
  Choose the application, right click. There is a Security tab. Here, you need to activate the permissions for all users.

• TOSHIBA Hotkey utility does not work

  Dear friends,
  I recently deleted a ton of spyware and advertising my satellite (I followed the advice of Norton antivirus to the letter), but now I've lost all the sounds on the laptop and I get the message...
  Error affected
  The recovery of the THotkey failed
  0 x 00031402, 0 x 00000002
  .. .to begin upward. I also notice that the 'secret' key/Escape FN volume does not work is (so I can't put the sound on or off.) Do anyone know how I can recover from this situation, the registry has been backed up before I did the samples, but it doesn't always with the back facing upwards.

  Thank you.
  Chris...

  Hi chris,

  It would be nice if you could tell us what operating system you have and if there is a Toshiba recovery facility or a MS. and satellite

  It seems that your Norton Software was corrupted or deleted a related file of the utility Thotkey. Did you check the safe mode and reinstall the utility THotkey?

  Rudi Bye

• Satellite U920T - function keys does not work after update to Win 10

  Hello, good morning / evening...

  I use (U920T satellite) and recently updated my Windows 10 Tablet
  but after that, the function keys, volume, brightness, key FN and even the backlight does not work anymore!

  I tried to restore the system and update the driver software but nothing has worked...

  I use these keyboard shortcuts all the time and now it's really hard without them!

  What is the problem? What should I do?

  The problem is that U920T satellite is not listed as Win 10 support unit and, therefore, drivers earn 10 Toshiba and software that controls the FN keys is not released.
  But as far as I know using the FN keys, system of Toshiba and the Support of Flash Card Utility driver must be installed.

  For all Toshiba units win 10 supported, the drivers can be downloaded from this page:
  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  Maybe you can try the drivers released for other models of portable Win 10 supported...
  I'm not sure if the software will be compatible with your model of U920T, but its certainly worth a try...

• Qosmio X 875 - ECO mode does not work immediately after Win 8 upgrade

  I used the upgrade Toshiba Upgrade Wizard to Win 8. He succeeded well uninstall the incompatible software before the upgrade and install the new Toshiba and driver versions after the upgrade.

  I activated the ECO mode, and to my surprise, it does not work as before (in Windows 7):

  * Now, it works with the brightness to level 1 *... very dark. Before, ECO mode allowed me to go up to level 4 and was always considered in Eco mode...

  If I increase the brightness, the 'eco mode is disabled' message opens immediately.

  How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?

  BTW, I am owner of a Qosmio X 875

  Post edited by: qosmitto

  > How to contact Toshiba to inform them of this problem and the other problem I found with the new BIOS?
  Contact your Toshiba authorized service provider in your country.

  Read this:
  + What is the TOSHIBA eco Utility? +
  http://APS2.toshiba-tro.de/KB0/FAQ2503AT0000R01.htm

  > It changes the brightness of the display of level 4, changes the brightness of the grey screen of level 1 (* 4),.
  _The * 4 means only on models with Windows7 installed _

  I guess that the previous configuration was only Win 7.

  8 win was made for mobile (use of the Tablet), the energy consumption of battery is also very important plant help to win 8. The consumption of the battery must be taken at the lowest level possible.
  So I guess that now help win 8 ECO medium mode and save the power max and long battery life time working at a max level.

• A satellite - PC diagnostic tool does not work

  I bought my Toshiba laptop in May 2009. It came bundled with Vista 32 bit. I tried several times to open diagnostic PC (a utility in the value Pack) but has never been able to do so despite a number of attempts to newly installed the VAP. A week ago, I upgraded to Windows 7 64 bit and downloaded the VAP for Windows 7 64 bit on the Toshiba site. I was like, goody, goody, now I can finally see what this thing. Tried to install and reinstall the VAP but PC diagnosis utility does not run. Or it runs invisibly in the background and I know of another soemthing.

  This is the kind of a rhetorical question that my system works well, but it aroused my curiosity to some extent - you know what can happen. It's like bugging me at this point!

  Has anyone out there actually to run PC diagnose? Is it me?

  Thank you.

  Hello

  Can you please tell us what laptop you have exactly?

  I have Satellite A300 and I can start PC diagnosis correctly but I have never used before. Why do you need it? Alternative, you can use another tool such as Everest or PC Wizard 2009. Check it!

  Please try to start PC diagnosis with the factory settings. I mean the pre-installed Windows version where all the drivers and tools are installed. Normally it should work.

• Installation of Ubuntu 14.04 on Satellite NB10t-A-101 does not work

  Hello world

  Sorry for my English: it is not my mother tongue. I'll try to explain my problem.

  I would like to install Ubuntu 14.04 on my computer (Toshiba Satellite NB10t-A-101), but it does not work.

  I boot on my USB (made with RUFUS), but it works once for each five times.

  After you install the operating system, when I restart the system, the computer does not find an operating system (I precise that I already check the EFI BIOS and disable secure boot)

  How to install Ubuntu?

  Hello

  This series of portable was equipped with a processor Intel Celeron 2810 n and this CPU belongs to the new Intel BayTrail platform.

  The * Intel deposit path * allows only the installation and utilization of systems capable of UEFI as Win 8 or 8.1 Win

• Satellite A500 - 14Q - Microphone does not work

  I have the Toshiba satellite A500 - 14Q for about 3 years. I changed the hard drive, keyboard, frame of the monitor until now, and I'm sick and tired of this laptop does not properly. Now, I've discovered that my microphone does not work. There is no problem in device, or with the driver manager. I hear that crackling noise when I try to enter any other micro device.

  Can anyone help please?

  P. S. I have windows 7 (64-bit)

  How did you test the mic feature? With the help of tool tape recorder?
  > the monitor framework
  Perhaps you have made a mistake and mic is not connected correctly. Did you do it alone or it was done by the Toshiba authorized service provider?

• Satellite A210 - FN buttons does not work on Windows 7

  I have a problem, just install Windows 7 Build 7100 (fron upgrade Vista 32 bit) and the fn on my Satellite A 210 does not work corectly.
  It only works with the action of the num pad, other functions does not work.

  What should I do to make it work?

  It seams that I have problems with the actions of Toshibas tool whitch controls but I can't find name to update...

  Hello!

  I put t understand why Windows 7 is so popular right now it s only a beta version

  However, I think that the reason for this is why no Toshiba tool is available at the moment, but I can understand that because Windows 7 is not yet out.
  You can try to install the package of value added. This is for Vista, but maybe it works also on Windows 7 being the most drivers for Vista works on Windows 7 too.

  Consult the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye