Satellite L670-1john - recovery Will HDD work if I leave the D partition?

Similar Questions

• buttons will not work if you leave the frame back button

  I have a few simple buttons that work very well until I leave the frame, the buttons are on a go to another frame. When I come back, the buttons are dead. This is how set up listeners and managers:

  for the buttons turn screen event listeners

  detailsMovieClip_mc.tour0.addEventListener (MouseEvent.CLICK, tour0_click);

  detailsMovieClip_mc.tour0.addEventListener (MouseEvent.ROLL_OVER, tour0_over);

  detailsMovieClip_mc.tour0.addEventListener (MouseEvent.ROLL_OUT, tour0_out);

  function tour0_click(Event:MouseEvent):void

  {

  do something

  }

  function tour0_over(Event:MouseEvent):void

  {

  do something

  }

  function tour0_out(Event:MouseEvent):void

  {

  do something

  }

  no idea why this is happening?

  The most likely reason is that you are going to an image where the buttons do not exist and then return to a framework where they exist, but are not one where they have their headphones to events assigned to them.

• Satellite L670-1john - activity of fan and temperature

  Hello

  When my Satellite L670-1john is not in standby mode and when no application is running (only OS) with an ambient temperature 20 ° C temperature wich about must be the processor?
  At what temperature fan start and stop?

  Feeding method chosen is normal with the optimization of the performance, the AC adapter.

  Thank you

  Hey,.

  Why is it important for you? You have problems with the temperature?

  The activity of the fan will be controlled automatically. Everything you can adjust change cooling method in Windows power to optimised battery management.

  By the way: here's a similar thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59683&TSTART=0

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues

• Satellite L670-1john crashes during startup when HDD Stor.e Alu is connected

  I have a laptop Toshiba L670-1john, HDD Stor.e Alu 1, 5T and also HDD Stor.e Alu 2 1, 5T.

  When I boot my laptop with HARD drive connected and turned on (Stor.e Alu 1, 5T aor Stor.e Alu 2 1, 5T), my laptop is frozen?

  How to solve the problem?

  Hello

  Try disabling it in the BIOS USB legacy mode
  Maybe it helps

  In my case it helped

• Satellite L670 Fn keys do not work after the upgrade to Windows 10

  Hello

  I ve upgraded my Win7 L670 to Win10. After upgrade do not work key Fn. is it possible to recover the functionality of these buttons in Windows 10.

  Wolfgang

  Hello

  Each cell function requires special tools and utilities.
  In the case of FN keys, Toshiba software controls this feature.

  But as far as I know that the Satellite L670 won't get any utility Windows 10 so probably this key will not work running Win 10.

  Here the details on the 10 Windows upgrade:
  https://Forum.Toshiba.EU/showthread.php?83832

• Satellite Pro L10 - recovery does not work

  I am currently that use the recovery cd of the product on my satellite pro L10, however when I am with regard to the selection of recover whole hard disk (option 1) then continue and then the following message appears on a black screen:

  For a drive partition error checking - please try again!
  Press a key to continue...

  When you press a key, then I get another white screen like this:

  X:\ >

  X:\ >

  I have no idea what to do about it, or even if it is indeed a problem, any help or advice would be greatly appreciated, thanks

  Hello

  Please format the HARD drive again and remove all partitions on the HARD drive.
  Several months ago, my recovery CD did not work. But after formatting HDD, I was able to perform the installation of the Toshiba Recovery CD.

• Satellite L655-149: recovery does not work with the new HARD drive

  Satellite L655-149

  PSK1JE

  Windows 7 Home Premium 64-bit (factory installed)

  Recovery of HARD drive on drive D (factory installed)

  My old toshiba (MK5065GSX) 500 GB hard drive became too noisy and slow so I plan to replace it with the new drive hard toshiba (MK5059GSXP) 500 GB.

  I created USB Flash HARD drive recovery.
  When the installation is complete and Setup installs devices an error "Windows Setup couldn't configure windows to run on a hardware on this computer.

  I've updated the bios
  I loaded by default in the bios
  I changed the SATA AHCI mode to compatibility IDLE

  assistance in this regard will be highly appreciated

  Set the BIOS to the default settings and try again.

  With the installation of recovery, there is a problem: either it works or not. If this isn't the case, bad luck and the only solution for you is to order original Toshiba recovery DVD on https://backupmedia.toshiba.eu/landing.aspx

  By the way: do you use that stick of recovery for the first time?

• Satellite L670-L14 - recovery question

  Hello.

  If all goes well, my problem is not as bad as it first appears...

  I tried to dual boot my laptop when I should have chosen to use the entire disk for the installation of the new rather than the partition I've selected.
  Therefore, all my partitions are parties with my installation of Windows 7 and the recovery of HARD drive partition.

  The advantage is that I backed up my C:\ and D:\ So I stll have a folder with "HARD drive recovery", but I don't know how to make bootable (if possible).
  I can't create a DVD right now, but I'll try tomorrow. Will this work?

  Anyone got any ideas?

  Any help would be appreciated - thanks

  > The advantage is that I backed up my C:\ and D:\ So I stll have a folder with "HARD drive recovery", but I don't know how to make bootable (if possible).
  Usually, you could get access to HARD drive recovery option by pressing F8 when starting the unit. Then, an option should appear called repair my computer.
  Then you should be able to choose HARD drive recovery.

  But I don't very well if it works after you delete the partitions m
  Then maybe, you need to use the Toshiba recovery disc that you will try to create tomorrow;).

• Satellite L670-143 - keyboard LAG but work external keyboard

  Hey all, I recently (3 weeks ago orsomething) bought a new laptop, a Toshiba Satellite l670-143.
  Windows 7 64 bit
  Intel® Core i5 - 430 M processor
  : 2.26 / 2.53 turbo GHz
  level 2: 3 MB cache
  4 096 (2 048 + 2 048) MB of ram
  ATI Mobility Radeon HD 5650 graphics card

  But this last week ive been keyboard problems. The problem is not always present, but when his present is not weather im play, surf the internet or write an important document.
  I'm not sure at 100% what the problem is, I spent hours trying to understand and to remedy, but nothing seems to help. But when I press a P, I sometimes PPPs. Or when I press a P, it does not appear. It is with all keys. And especially when I type fast. Also, when I pressed the back button, it "lags behind (for a fraction of a second)" every 2 seconds orso. When the problem is not present, the BACKSPACE key is smooth.

  I did a lot of virusscans and did all the registercleanups etc. I made sure that the keys filters and sticky keys are disabled. I checked all drivers updates. When I tried the fix http://keyliner.blogspot.com/2009/11/windows-7-slow-keyboard-response.html nr.1, he disappeared when I rebooted. but the next day, the problem came back and when I redid it, (does what it says + delete the file and recreate) it does not solve the problem. Maybe it was just random chance, I don't know. I turned off the laptop battery to see if she was getting better, he has not.
  I'm not sure of what other ive also tried...

  When I plug my usb keyboard (I write about this now) is not a problem either.

  Ive also browsed this forum,'m (happy in fact) to see that others have the problem as well, but I'm still looking for a solution that works for me
  . It would be simply amazing that I could get rid of this, its incredibly frustrating :(

  Thanks for your time.

  -To show wht TI locomotives as when I type wth myyy built-in keyboard, herr's-

  Hello

  To be honest, if an external keyboard is working correctly I think that it s a hardware malfunction and keyboard connected internally. I doubt it of a virus or something else because the same mistake happen on an external keyboard as well.

  In addition to the keyboard there is no special driver, it of a part of Windows so that you can t update the keyboard driver.

  Now in your case I would take with the closest authorized service provider contact. Your laptop is only 3 weeks so it s under warranty. If you communicate with ASP, they can view the workbook, and if you need a new keyboard, the repair is free. :)

• Satellite L670 PSK3EE - recovery Recovery Media Creator ERRORS

  Hello

  I have a Satellite L670 PSK3EE-xxxxx

  When I run the Toshiba Recovery Media Creator application, I got two errors:
  Unxcepted error, close the application and restart:

  0D00F6-49-00000015
  0D 0172-49-00000015

  Then it displays the app and ask 3 DVD...
  No idea why?
  Where I download a new version of Toshiba Recovery Media Creator?

  Thank you in advance

  Creative recovery Toshiba claims 3 because three DVD empty DVD is needed to create a recovery disk!

  PS: I found Toshiba recover Media Creator download on this Australian Toshiba page:
  http://www.MyToshiba.com.au/support/computers/satellite/L670/psk3ea-055017/download?OS=25

• Satellite L670-1john - difference between versions of BIOS

  My laptop bios version L670-1john is 1.9, download, bios '2.10 - WIN. "

  What is the difference between the versions?

  It is necessary to update my bios?

  I put t know what the difference is, but if your laptop works well and you don t have any problem with it, don't update anything.

  Touch Don t well running system!

• Recovery disks will still work if I wipe the HARD drive?

  Hey everybody! I have a quick question and I hope one of you can tell me if I'm about to make a huge mistake.

  My HP Pavillion Dv6 had serious problems and chkdsk deleted a lot of clues. I worked on the problem of HARD drive and looks is not default (no bad sectors, only of weakness). I read that zero-filling can help with HARD drive problems.

  My only question is that I don't know if I'll be able to just reinstall after I have zeros, because the building programs will be wiped. I have an application and Driver Recovery CD and a DVD of system recovery that I have used before. These will still work if I have zero filling? Or I need something else?

  Thank you very much for your help!

  Sadie

  Hi Sadie,

  Yes, your recovery disks will work if set you to zero the whole HARD drive (they would also work on a new HARD drive if you need to replace the existing one).

  When reloading the operating system, you choose the "Factory Reset" option will reinstall the OS and recreate all the original scores.

  Kind regards

  DP - K

• Wireless, Satellite A500-17 x will not work

  Hello

  Bit of an issue, the wireless on my laptop will not work. It is certainly a problem with the laptop itself, the router etc are all fine. I can connect to the internet with a cable, but Wireless does just not all. The switch on the front of the laptop, which should turn the radio power, has no effect. Before this problem of switching on the position 'on' would cause icon connection Wireless next to the switch to light up, it's no longer the case. Furthermore, when I tried to check the drivers in Device Manager there are only one option under "Network adapters", which is the "Realtek PCIe GBE Family Controller. Right click and select "update driver software...". ' result in a message saying that the proper drivers are installed. I don't know, but I suspect that there may be a lack of adapter or something?

  Any help much appreciated.

  Maybe some unknown device appears in Device Manager?

  You should have 2 entries for network adapters. One for the LAN and the other for the WLAN.

  By the way: when you set switch WLAN on WE and when you use FN + F8 what happens exactly?