Satellite L675-S7040 - white flash screen

Similar Questions

• White flashing screen Photoshop

  I installed the adobe package and when I run Photoshop and After Effects it flashes a white screen.  I did recommend the site, modify the Advanced mode for the performance of the basis of the menu, but the problem persists.

  The workspace of departure seems to cause this problem, try the step below.

  Go to the Photoshop preferences > General > uncheck show the splash screen > restart Photoshop and check again.

  Let us know if this helps for Photoshop.

  Thank you

  ~ Mohit

• Re: Satellite L675-10 t black screen after disassembly problem

  Hi all

  I recently had some problems with my L675-10T overheating, even when I was with a big fan of cooling for the games.

  I realized that the problem resulted from blocked exhaust and dust and it is why, after reading and watching the many tutorials, I opened my laptop computer successfully and all cleaned up.

  The temperature dropped to 20 c and I was happy.

  The next night, however, took my laptop and headed for the living room, and it will stop.
  Black screen and nothing passed. So I ran to the internet and found this solution, it worked btw.

  1. turn off your computer
  2. unplug all wires (including energy)
  3. disconnect the battery from the bottom of the computer.
  4 re - connect the power cable. (the battery should not be in the computer)
  5. turn power on. The screen works. Choose start windows normally. (if you get this screen)

  The thing is, the same thing happened to me this morning as well.
  Twice in 2 days and im a little worried I did something wrong during Assembly of the laptop or something. Any ideas? Or do I keep accountant with the above solution?
  Looks like a mess of power upwards of sorts.

  Thank you in advance.

  Hello

  I assume that this question has not happened before you have disassembled the laptop. Right?
  To be honest this similar issue happened to me to. The portable light not (black screen) after I'm entered in the mode 'sleep'. However, this happened only once

  It s hard to tell why this happened to you it of not impossible that you have damaged something for disassembled the procedure.

  However, the fact is that the warranty is not valid more because you opened the laptop. That is why any approach (especially parts replacement) to solve this problem would cost money.
  So ultimately it s your decision: a technician visit to downtown to see the pieces of equipment or keep your stay with the workaround mentioned above.

• Satellite M100 suddenly white/black screen

  Dear all,

  Good evening

  Can advise what to do on my laptop. Suddenly the screen black but may be able to on, but no display or HDD led light, only power led and the Start button / stop have light.

  Thank you

  Hi Hunter

  You can try to remove the battery and unplug the AC adapter.
  Wait a bit (30 min), then reconnect the two devices.
  Again for this machine

  If this will not help you can try to connect it to external monitor to check if some pictures would appear on the second screen
  If it would not help you then I guess a serious problem of material made sure and a technician of the ASP must check hardware

• Navigate to url is producting a white flash before loading of the url

  Hello

  I'm wondering is someone can help me.  I placed a brief swf in a html page.  There is a single button entry that should load the next html page.  I used:

  var link: URLRequest = new URLRequest ("http://www.adobe.com");

  button_mc.addEventListener (MouseEvent.CLICK, onClick);

  function onClick(event:MouseEvent):void
  {
  
  navigateToURL (link)
  
  }

  button_mc.buttonMode = true;

  However there is a white flash screen before the opening of the url

  How can I avoid this.

  Thank you!

  Hello

  Maybe it's only because the new page HTML background is white, so that it displays the swf file is in fact starting to be on the page.

  But a link to what you are doing would be useful.

  ____________________

  Design Cyboide

  Creating websites Montreal

• Satellite L675-10T stucks in a black screen after the new RAM upgrade

  Hi all

  I recently decided to upgrade the memory in my laptop pretty.
  I went online, has adapted Rams and ordered.

  What I got are 2 of them:
  http://www.offtek.co.UK/RAM-specification/Toshiba/Toshiba-laptop-memory/satellite-L675-10T/pid921300

  The installation is very easy, but as soon as I turn on my laptop, it stucks in a black screen with a straight white line underscore.

  I guess it's an incompatibility problem?
  Could you please help me?

  Thank you.

  I think you're right, it seems that the modules are not totally compatible, even if the online retailer page says they are
  You can remove the new RAM modules just to check if the laptop to boot up properly I guess correctly the unit upwards.

  Solution? Use a different RAM modules I had good experience using modules from Kingston, they might be a little expensive, but I think they should work correctly.

• Satellite A85-s107 - white screen at startup by using the power of the battery

  Satellite A85-s107 white screen at startup by using the power of the battery

  When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
  After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

  There is no problem when I start upward when it is connected to an electrical outlet.
  Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

  Any suggestions?

  PS:

  also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

  Don t need to recharge the battery if the AC adapter is plugged ;)
  Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
  In this case, only the replacement could help and it could be a costly affair

• Satellite Pro L450D - 12 X - flashing screen on and outside

  * Satellite Pro L450D-12 X flashing of the display on and outside *.

  Can Hi anyone help?

  I have a laptop Toshiba L450D-12 x, when you start the laptop, the screen is flashing / blinking on and non-stop.

  The screen turns on seconds, and it does not stop, becomes faster and faster!

  The operating system loads up, I can not connect, but everything else seems fine.

  Here is a list of what I've tried,

  1. connected to an external monitor - on the monitor, the screen does not flash, but on the laptop it is flashed!
  2 replace the cable with a new one - continuous flashing screen
  3 replace the inverter - continuous flashing
  4. replace the screen - continuous flashing
  5 reset the default settings of the bios - continuous flashing
  6. started in safe mode - continuous flashing
  7 install the latest driver - continues to blink
  8. removal of ram - continues to Flash
  9 deleted the hard drive - continuous flashing

  Please help, I don't want to replace the motherboard and then find it is not the motherboard

  Concerning

  RAF

  > Please help, I don't want to replace the motherboard and then find it is not the motherboard

  In my view it's hard to say what's wrong here.
  You said that if you connect the external monitor, the display is OK means (in my opinion) than the motherboard and graphics card should be ok.

  I think you should visit a next engineer downtown to get verified material sound much less expensive than buying the following parts.

• Satellite L675 - 11 H - cannot access and/or played on USB flash drive files

  Hi all

  I recently bought a Toshiba Satellite L675 - 11H and tried to transfer files from a USB Pendrive on my hard drive from Toshiba. The files were already transferred from my old laptop (HP - XP) on my USB flash drive.

  Unable to access the USB flash drive to any of the USB ports that I connect my new laptop flash drive. What could be the problem here? Thank you for your help or tips!

  Hey Rush,

  Can you post more detailes about this behavior? What happens if you connect your laptop HARD drive, you don't see that Windows installs the drivers for the new USB device or do you have an error message? If you have connected the USB check of Windows disk management if she s recognized there (Control Panel > system and security > administrative tools).

  Have you tried other USB devices such as USB mice? If they don t work too the problem might be connected to the USB ports. In this case, you must delete all the USB ports on the Device Manager and restart your laptop. Also the chipset driver update might help.

• Satellite M60-164: white screen on TV

  Has anyone encountered a problem with the white TV screen when connected between the computer svideo cable TV & laptop? Either way, cable has been verified and is not defective.
  I think that the laptop's s-Video output must be initialized somehow.

  Any suggestions?

  Hello

  You must switch to the TV set.
  Try to use the FN + F5 key combination

• HP Elitebook 745: HP Elitebook 745 flashing screen

  Hello

  I have problem with my screen in Elitebook 745 (HD resolution +). It's strange pixels flickering on white background. I recorded a short video to introduce this issue: http://youtu.be/yRk643s59Eo

  It is only visible from certain angle. I have never seen this before on other laptops (even on the older). I tried to change the resolution and refresh rate, but it does not help. I checked the different systems (win 10 and Ubuntu).

  Would be - this technical problem or maybe a kind of "function of the screen? My eyes really hurt from that.

  I've updated the BIOS with the latest version (1.10) and fortunately flashing screen no longer exists.

  So this was a firmware issue, not hardware.

• Satellite L350 - D 215 black screen with blinking cursor

  Satellite L350-D 215 black with cursor flashing screen - it worked fine said he had to restart and that's what happened, I can't in windows allows any single me in bios and Boot Manager.

  I am looking for help to solve this problem. I don't know what went wrong, my warranty runs out on December 26, 2010 so if I can't fix it myself can I have return to toshiba to fix. I'm at a loss as to how to solve this problem, I have no disk for laptop recovery.

  I tried the fix when you remove the battery and press the power button to 30 seconds doesn't not work, also tried leaving a few hours without battery and tried plugging in to power same, toshiba screen and only boot in the bios etc usually let HDD boot in windows only in black screen and blinking cursor.

  Any help much appreciated. I saw the restoration of disks for £9.95 on a Web site for the machine so don't know what to do... totally empty.

  Hello

  I agree with Akuma.
  Blinking cursor means that the Windows OS can not be loaded / booted up.
  You need to reinstall new OS.

  If you have a Microsoft windows CD you can use this disk to reinstall the operating system. The necessary drivers can be downloaded from the Toshiba page.
  Otherwise, you would need order a recovery disc Toshiba from here:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Satellite L850 - 17 k - black screen with blue dots

  Satellite L850 - 17 k black screen with blue dots see photo
  It is THE video card, can't find it.

  See photos

  If you see the same on internal and external display LCD, I presume that the video card is faulty.

• Windows 10 - FN button and touchpad lock/unlock button problem Satellite L675-11J

  Hello
  I have a Toshiba Satellite L675-11J and 10, lock/unlock FN key touchpad button do not work after upgrading to windows.
  Help, please!
  Best regards

  Fn keys require special Toshiba software that controls this feature for laptop.

  But Windows 10 drivers are not published for this series of Satellite L675 because is not win 10 supported.

  From my point of few, this means you can use Notepad as part of Win 10 but without the keys FN function.

• Satellite L675 is stuck in a loop of "system configuration".

  I have a Satellite L675 pre-loaded with Windows7 64-bit, because it was very slow, so I decided to recovere it at the default out-of-box factory.
  But he was now locked in a loop of "system configuration" with several reboots during more than an hour - that makes any sense?

  Kind regards

  If the recovery procedure is not in the end it makes sense. Recovery procedure may take up to 2 hours.
  Any donation interruption t installation and wait for that configuration and recovery image installation will be completed.