Satellite L675 is stuck in a loop of "system configuration".

Similar Questions

• Satellite L675-10T stucks in a black screen after the new RAM upgrade

  Hi all

  I recently decided to upgrade the memory in my laptop pretty.
  I went online, has adapted Rams and ordered.

  What I got are 2 of them:
  http://www.offtek.co.UK/RAM-specification/Toshiba/Toshiba-laptop-memory/satellite-L675-10T/pid921300

  The installation is very easy, but as soon as I turn on my laptop, it stucks in a black screen with a straight white line underscore.

  I guess it's an incompatibility problem?
  Could you please help me?

  Thank you.

  I think you're right, it seems that the modules are not totally compatible, even if the online retailer page says they are
  You can remove the new RAM modules just to check if the laptop to boot up properly I guess correctly the unit upwards.

  Solution? Use a different RAM modules I had good experience using modules from Kingston, they might be a little expensive, but I think they should work correctly.

• Satellite P500-190 stuck in a loop

  Well, I try to summarize what has happened so far.

  I have a Toshiba Satellite P500-190 has started acting as each task is too big for him, constantly showing disk hard loading, programs did not respond for a while... then I ran the reconverty tool, reset the c drive, the problem still there.

  I ran all the error detection of characteristics of pc, no hardware problems or software detected. So I installed malwarebytes anti-malware and ran a scan, it finds errors, but before I could act, the program froze again no response. Press ctrl alt del, black screen, no response... reboot. Now my dosent pc even trying to start windows, only error detection program and each restart goes like this, even after going through the program as it is said.
  I tried to get to the other menus of repair, but it says I must be logged in to do this.

  Any ideas how to continue?

  Hi bug

  Please reinstall the recovery image and boot OS without having to install additional stuff.
  Do not connect to the internet and check the functionality. Open some pre-installed apps and see if they will not work correctly.

  Play around with these factory settings and let us know if there is a problem.

  How old is your Satellite P500?

• Satellite Z830-10J stucks in a loop of the installation

  Hello

  I need help... I have a new Z830-10J. During the first
  configuration of the laptop crashed and restarted. I always get
  the error

  "The computer restarted unexpectedly or met."
  an unexpected error. Windows Setup cannot continue. To install
  Windows, click "OK" to restart the computer and then restart the installation. »

  After the reboot, I get the same error again and again... Pressing F8 does not bring
  repair options. Each option (Safe Mode, debugging and so on) doesn't lead only to the
  same mistake.

  What can I do?

  Best regards
  Markus

  Meanwhile, I have a bootable USB key with win7, but the
  RepairOptions can't find a backup to fix... but I see
  3 partiions, besides that theres a normal system backup and
  a boot partition.

  Edit:
  Im going to download the demo version of Win 7 Home Premium and
  will install this one. Don't you think that I am able to 'restore' the system
  After installation? Otherwise the whole software of tohsiba
  is lost :(

  Post edited by: ltkrogoth

• Computer stuck in the loop of update configuration

  original title: after an update of windows the computer configures 3 updates then stops, restarts, and then did exactly the same thing again and again and again.

  Can't get windows log in screen as it sstays in this configuration and stop cycle

  How do I get out of this cycle?

  Hi MargiRobinson,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Refer to the article below and try the steps mentioned, check if it helps.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• Satellite T110 - loop 'system configuration '.

  Hello

  I'm a newbie, but not a total newbie. Just bought a new Satellite T110 pre-loaded with Windows7, lit, the first screen asks me to choose 64-bit or 32-bit, I clicked on 64-bit machine then entered a default factory recovery mode, but has now been locked in a loop of "system configuration" with several reboots during more than an hour - that makes any sense?

  Kind regards

  Pash

  You won't believe me, but it makes sense. I obtained through Satellite L500 and I noticed the same thing.
  After nearly one hour and several OS reboots was pre-installed and configured correctly.

• computer stuck in a loop with the update

  laptop has crashed and in safe mode, I uninstalled last update now it is stuck in a loop and cannot configure 3/3 before it crashes again.

  Hello

  I suggest you to th this method.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

• Satellite C660 - 115 Win7 update stuck in the loop. SOLVED!

  I have a Satellite C660-115 which is stuck in a loop "of despair".
  I am a COMPUTER engineer support and a customer brought this laptop of mine, who was stuck in a loop of repair Win7 (64-bit prem) that simply says Win7 could not be repaired.

  I backed up the profiles of subscribers using Hiren boot CD (done chkdsk as well - everything is OK), and then did a factory restore.
  No problem at all with the restoration.

  Started doing the updates for Win7; SP1 seems to install OK without errors.
  The system then picked up 37 Win7 updates automatically and asked to reset.
  Upon reboot, Win7 entered "drvload.exe" and started an auto repair.
  It took time and the system started OK, but without any sign of SP1, looks so much like system restore to an earlier point?

  I though this update to process 3 times now and each time after that a lot of auto update, the same sequence occurs.

  How to exit this loop? What is causing this problem, which I have never seen before?

  No software has been installed, other than that of the recovery process.
  I even uninstalled McAfee, just in case this could be a problem - no change.

  Ah, just took another look. It is stated in Win7 system registers that the restoration was caused by a corrupted file C:\ci.dll. Google to find it was a sign by a rootkit virus in the HARD Master Boot Record disk (the file ci.dll itself is NOT damaged). Found a fix tool

  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  It identified the rootkit and removed.
  Seems to be OK now!

  Hope this post could help others.
  Of course, the factory restore does not erase the HDD MBR rootkit...

  Thanks for sharing!

• Satellite A660 - 11 M stuck in a loop when installing recovery

  Hi all.

  I am now under a procedure of recovery for A660 - 11M. I used a bought at Toshiba Recovery CD.
  Everything was going well until the recovery is stuck in the loop of ' * now System Performance Rating *'.

  I found a similar case, where a person has solved problem of forced reboot. I did, too, but when he turned, the loop began.

  I wonder if there is anyway to stop this notation. It does not seem very important ultimately.

  Thank you.

  Hello

  You must re-run the HARD drive recovery.
  This means you must turn on the device
  -Press F8
  -then choose fix my computer
  -Then choose HARD drive recovery and
  -Retrieve the State of the box.

  Welcome them

• Satellite A50 stuck in boot loop after restore

  Hi, I tried to reformatt and restore my old A50, followed the instructions on the recovery disk only when it restarted it gets stuck in a loop, loading windows XP and then restart. When I start it in safe mode it says Setup failed to install and did the same thing.

  I started with a windows XP installation disc as well and it does nothing.

  Help, please!

  Thank you very much

  Leo

  Wait a moment Leo.

  If I understand correctly you original installation of recovery (recovery DVD) results issue described image.
  Installation of operating system with original installation disk Microsoft WXP ends with the same result.

  Can you confirm this?

• Satellite L675 crashing when you do whatever it is the linked graphics

  Hello

  I recently got a new Satellite L675 and am stuck with problems.

  I am running * Windows 7 Enterprise 64-bit SP1 * and it has a Mobility Radeon HD 5650.

  As I received the laptop, it would crash when doing something that contains a little graphic, IE running Windows Experience Index, certain opening excel docs and even to open games.

  The laptop was running windows 7 64 bit Home Premium edition (where the problem already taken place) and decided that a new facility would be sorting. However, this is not the case.

  I have the latest video drivers, which can be found [here | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 178 & selProduct = 5414 & selSh ortMod = 988 & language = 13 & selOS = 30 & selType = 11 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 11 & page = 1 & ID = 74607 & DISO = 3 0 & driverLanguage = 42].

  On a side note, when you run dxdiag, it shows the system model is L670, L675 and not like the label under States. Don't know if this is normal, however the display drivers work for both models.

  Also I sent again to where it was purchased and they did tests of material and there is nothing wrong with the hardware.

  Post edited by: JohanD

  > Also I sent again to where it was purchased and they did tests of material and there is nothing wrong with the hardware.

  You can replicate this problem or not the laptop down occasionally and only from time to time?
  What happens exactly? Do you get a BSOD?

  I think that if you are not able to reproduce this problem, it would be really hard for the tech guys check the hardware
  However, it's really unusual that runs any application causes the crash then maybe his hardware issue in this case I recommend asking Toshiba ASP (service) for assistance.

• Cannot connect to Youtube. The first page load, try to register and gets stuck in a loop.

  Pretty much what the title says. I try to load Youtube, and during the initial page load, it automatically attempts to connect. I don't know why, but it can not open my session and gets stuck in a loop. I don't have the patience to see if that solves finally itself, especially when I can sign very well in other browsers. The same thing happens whenever I try to connect to my Google account, as Youtube is related to Google.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.

  Note: This will be temporarily you disconnect from all the sites that you are connected. To clear the cache and cookies to do the following:

  • Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  • Under "Time range to clear", select "all".
  • Now, click the arrow next to details to toggle the active details list.
  • In the list of details, see the Cache and Cookies and uncheck everything.
  • Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

• Elite x 3: How do Hard Reset Elite x 3 - ring stuck in a loop

  Hello

  I just got my x 3 Elite and it is stuck in a loop, because I just get a blue screen and restarts it.

  I tried hardware reset using key combinations that I use on my other Windows Phone, but it doesn't seem to work on the elite.

  I also tried the Windows Phone recovery tool, but the elite is not yet listed on the devices.

  I looked on the uspport page to find out how to do the reset on the elite, but he mentions only get within the OS which I can't.

  Does anyone have an ideas/suggestions?

  Thank you

  Matt

  Hello

  I had exactly the same problem.  I powered my unit off (hold power butten for 10-15 sec) and kept it that way for more than 24 hours (Friday night to Sunday morning).   During this time, I did not get plugged.

  When I started this morning it starts normally (in my case it installed the preview of the release of windows mobile 10)

  Good luck

  Bryan

• Windows 10 - FN button and touchpad lock/unlock button problem Satellite L675-11J

  Hello
  I have a Toshiba Satellite L675-11J and 10, lock/unlock FN key touchpad button do not work after upgrading to windows.
  Help, please!
  Best regards

  Fn keys require special Toshiba software that controls this feature for laptop.

  But Windows 10 drivers are not published for this series of Satellite L675 because is not win 10 supported.

  From my point of few, this means you can use Notepad as part of Win 10 but without the keys FN function.

• Mail stuck in the loop. Cannot access same Mail preferences!

  Hello to you all. Can anyone help? I'm trying to set up Mail (in lieu of Thunderbird) I want to use the possibilities of synchronizing with Mail on my other Apple devices. The title says it all, and I have attached a screenshot of what I see. Impossible to do anything, except to force them to leave cannot even open Mail preferences! I'm on iMac with El Capitan Version 10.11.3 Mail Version 9.2 (3112). Henry

  

  Hi Aitchb65,

  Thank you for your participation in the communities of Support from Apple.

  I see that the mail is stuck in a loop and the opening of many windows unexpectedly. Try to run Mail in 'safe mode' by following these steps:

  Open Mail and immediately hold down the SHIFT key until the Mail is opened. This causes the Mail to open without any message or box to the selected letters.

  Of Mail if closes unexpectedly when displaying certain messages.

  If the Mail normally opens, try to update your SMTP settings -Mail (El Capitan): list of outgoing mail server settings.

  You can also delete email accounts in Mail preferences and start over after export and save all important messages. To help in this part, see Mail (El Capitan): Configure Mail with your email accounts and Mail (El Capitan): import / export the mailboxes.

  Sincerely.