T410s HDD LED lighting is always that the charger is in.

Similar Questions

• kb2707511 shows that it is installed but appears always that the update is ready to be installed.

  kb2707511 shows that it is installed but appears always that the update is ready to be installed. I uninstalled it down loaded the file and reinstalled, still the same thing, Fix - it Ran no problem detected, a suggestion? Windows xp home Service pack 3

  I also ran my anti-virus (AVG) Spy bot S & D, Microsoft Safety Scanner program and no problem found in none of the scans.

  I just want to update my post, I installed the kb2707511 update in the safe mode and so far he has not yet presented. Keep your fingers crossed that it does not yet appear. Thanks to all the people on this site that help people.

• I paid a monthly subscription, but the room light informs me that the time has expired and you pay. I do so I can work with photos?

  I paid a monthly subscription, but the room light informs me that the time has expired and you pay. I do so I can work with photos?

  Hi Edward,.

  Please check the help below document:

  https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html

  Kind regards

  Sheena

• HP Pavilion Notebook - 15-ab15: is - it bad for the battery to always have the charger plugged?

  Sorry if 'hardware and upgrade' are bad advice for this question but I've not found a better...

  Is it bad for the battery to always have the charger plugged? 99% of the time that I have the laptop on a table and it's easier for me to leave the charger connected, instead of worrying about the battery percentage all the time.

  Hello:

  Yes.

  Please read this guide from HP battery care practices to obtain the maximum efficiency of the battery of your laptop.

  http://support.HP.com/us-en/document/c00596784

• HP G72 - computer laptop is plugged in and that the charge light appears on the side, will not turn on

  I have G - 72 laptop I've had for about a year now and just yesterday, I started having a problem where the laptop does not start? It is connected on the wall and the laptop and seeing load lights up blue and the computer does not start. I unplugged and still nothing?

  Don't know what to do?

  Hello

  Try a Hard Reset as follows.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the power button for a minute.  Reinsert the battery, connect the AC adapter and see if the laptop boots.

  Kind regards

  DP - K

• Satellite L750: HDD LED lit almost always - very slow system

  Hello!
  I have a TOSHIBA * L750 - 13 L * laptop with part #: * PSK30E-00R00EG4 *.
  The system was fast, but then one day suddenly it got very very slow. White led disk light remained on and opening the usual document (or even the jpg photo) obtained extremely slow.

  When I start windows 7 (64-bit), it works fine for a minute or two and then the hard drive lights all the time (with a minor stops). Opening documents at this point is pretty darn slow.

  I have discovered that when in safe mode (with or without networking), it works fine but when I run a normal mode, it is very slow. When I learned that I just did a clean install of Windows 7 64 bit on c: (format and install). Other two partitions d: and e: remained intact. Unfortunately, nothing has changed. When I installed all the drivers of light light HARD drive again and all went to "mode"snail".

  I installed avg, amr player 7zip, chrome and image resizer for windows, and all drivers needed in a correct order...

  What is a problem? He worked for six months without problem - I have not installed anything new... How to solve this problem? Why didn't - it's not a problem that appears in safe mode?

  Unfortunately, on this virtual path is not easy to offer the exact diagnosis but I assume that there is a problem with the HARD drive (bad sectors on HARD drive specific position).

  If the same problem occurs with own preinstalled OS, I presume the troublemaker is HDD. If you have the second disk HARD try to exchange it, reinstall the recovery image and test the features.

  If the warranty is still valid, I recommend that you contact the nearest Toshiba service provider, explain the problem and ask for help.

• My new HDD is damaged, I would that the instructions to remove the hard drive and install windows 7, so I can later install windows 8.

  Hardware failure on the disk.  Installer installed new drive and put it on Vista.  I have corrupted data and can not download the service pack 1 upgrade to windows 8.  Can I erase the hard drive and buy a cd for windows 8.  If yes how I wipe the drive hard and etc.  Thanks in advance, baildaily

  To avoid confusion and duplication of effort, please post a follow-up later all replies to your thread of origin-online http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/error-8000ffff-unable-to-fix-need-advise/597003cb-e5a7-4198-8ae6-36cafe876005

• my battery meter is grateful to my battery, but it says that the charger is plugged ing not charging but why dosent it recharge? How can I recharge?

  It is said: 8% available (plugged but not supported)

  Hello

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Device Manager - Batteries - Double click on each item - tab drivers - update drivers
  (who can not do anything) - then do a right click and UNINSTALL-REBOOT which will refresh the driver
  Stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HPPhoenixctrl: WANT to series PHOENIX - LED lighting control Solution

  I'm new to the forum and just got my new PHOENIX envy 860 - 180st, personalized with the following text:

  Windows Pro 64-bit 10

  Intel core i7-6700 4.0 GHz

  16 GB OF RAM

  512 GB SSD

  GeForce GTX 960 2GB

  No secondary drive (I store all the data on a NAS)

  Several Web pages featuring LED façade lighting, I understood that the 860 series provided a method to customize these lights.  I also believe I read that the 850 series could only turn.  However, I can not locate ANY documentation regarding the LED lights.  After hours of searching online, I only now have an interest to stop and reduce my electricity bill.  HP not me was not impressed by this "feature" negotiable.

  There is an application called HP Phoenix lighting (or LED) control which is used to control the LEDS.

  I found it in an old net while browsing through the subject.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/missing-software-HP-envy-Phoenix-850se/m-p/5146673/highlight/true#M111153

  Check in the Control Panel, or type it in the search box on the systray next to the symbol for Windows. There could even be an icon that represents the control of lighting in the systray. My last HP 15 Omen product loan had an app called HP Omen Control, which allowed for control of groups of the backlight on the keyboard. She allowed the owner to make changes to custom groups of key color.

  If she needs relocation, then it must be done in the HP Recovery Manager. See reinstalling software and applications to the HP Recovery Manager.

  @NewEnvyOwner

  Try the following softpaq. It's called the HP utility control of Phoenix.

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71672.exe

  BTW, the HP representative, that you talked to was wrong. The softpaq were found in the download of the 850 self-service portal want to Phoenix by HP Expert @Dragon-fur.

• Dell Inspiron 17R 5720 does not work with the charger. Charger is not recognized. No problem with charger.

  My Dell Inspiron 17R 5720 does not recognize charger. And unfortunately my warranty expired 2 months ago.
  It was plugged and work in the morning, but then in the afternoon I noticed he was running on battery only. It does not start without battery (charger just plugged).

  1 this is what I did to debug. Me and my brother, we bought the same computers Dell laptops at the same time a year and a bit ago. That's why a debugging purposes, it was good.
  I took my charger and plugged into his computer. And it works. Certainly not the charger problem I guess. And when I plug the charger my computer, green light is still on the charger. And I have the original charger provided with the laptop.

  2. now, laptop is running on battery only, so that means that this motherboard works. I think so.

  3. the next thing I did was charger disconnected and removed the battery from the laptop. Then I pushed and hold the "Power" button for 45 seconds to pay a royalty to the flea market. Charger plugged in but laptop will not start.

  4. then I booted the laptop on battery, went to the BIOS and check if the charger is recognized in the BIOS. No, it does not recognize charger. So, if this isn't a charger so what else can we?

  5 laptop has no strange smells so I don't know if something happened with the motherboard, but I guess that motherboard is ok because it works battery.

  6. I was thinking of updating the BIOS, but I can't do it, because it will be not be updated then the laptop runs on the battery, it needs to be plugged.

  Now I'm stuck. I don't know what I can do. I'm willing to spend a little more money on it to try to fix.

  If someone had such a problem in the past please let me know what you have done and if it fixed it.
  Or if anyone has any other ideas, I will be happy and appreciated the help.

  Hello and sorry for this late post. Just had this problem... If there is nothing wrong with the AC adapter, it's a software problem.

  Close the laptop... Unplug the AC adapter / CC... Remove the battery... Plug the power adapter... Start the laptop... Go to the control panel... Find and select the Device Manager... Batteries, left click... Uninstall Microsoft AC Adapter, uninstall Microsoft ACPI compatible with battery control method... In fact, uninstall all you can under the batteries, but that should be all there is. It will be re - install when starting... Stop cell phone... Remove the AC adapter / CC... Replace the battery... Plug the power adapter... Start the laptop... Now, everything should be good.

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• Nb505 shuts off when I remove the charger

  for some reason any my Toshiba netbook mb505 turns off when I remove the AC adapter / charger netbook. I can go on the netbook when its plugged in. I also see that the charger is plugged and not to charge and is 99%. If anyone can help it would be appreciated.

  Are you using the original Toshiba AC adapter?

  Looks like the battery or motherboard has a problem and may need repair to a Toshiba repair center.

• How will I know if my magic keyboard is in charge? And how know when it is done load so I can unplug the charger of lightning?

  How will I know if my magic keyboard is in charge? And how know when it is done load so I can unplug the charger of lightning?

  I remember reading that the charging time is about two hours.   If you have exhausted the battery it may well take longer.    After the period of two hours, he must run for about a month in any case if you could take the charger after 2 hours.    But I remember also as statements using the old MM1 mouse with rechargeable batteries Apple and stand-alone charger.    MIne has quickly reduced by about 14 days and now its down to 7 days.

• Venue Pro 8: use the charger with a little more voltage and current?

  I just bought a Dell came Pro 8 tablet used running Windows 8.1. The seller didn't have the original charger, so he gave me a 12W of Apple loader that had taken out nominal 5.2V and 2. 4A

  Is it okay to use this charger for my Tablet? Any potential problems in the long term?

  Thank you!

  I'm sure that the voltage is OK to 99.9%.  The extent of the current note goes, which is often misunderstood.  The rated current for a charger power or power is the maximum that the charger/power is able to provide. It could be evaluated to a zillion amps, but the equipment to which it will draw only what it requires.

• problem, plug the charger on my Zire

  I have an old Zire I used for about 10 years.  I think that I made a mistake and tried to put the needle in the hole for the battery charger. The result is that the charger is not 'connect' to the Zire... and the Zire tells me that the battery is low.  All the world had this problem?  Is there a solution? I really wouldn't want to lose all the data I have stored more than 10 years!  What's a guy to do?

  The male part may have broken free of the motherboard.

  Removable instructions (courtesy of Directfix.com)

  http://www.DirectFix.com/category/_ZIRETAKE.html

  WyreNut