Satellite L750 - problems with Wi - Fi and Bluetooth

Similar Questions

• Problem with vaio pro and bluetooth mouse.

  My new Sony Vaio Pro has been disconnected my bluetooth MS sculpt mouse.

  I had to re - connect or even re-install the mouse. Painful!

  It turns out that bluetooth devices is powered via a USB controller

  On the Generic USB controller, under properties, there is a check box selected that allows the computer to "Allow" computer to turn off this device to save power

  I unchecked which and now my mouse works fine.

  Thanks for that. I couldn't work at all with the Pro my bluetooth mouse. Now maybe I can - if I can only find where I put the mouse...

• Satellite U500 - problem with Windows 7 and HSDPA USB modem

  Hello
  My wife recently purchased a Toshiba Satellite U500, that came pre-installed with Windows 7 64-bit.

  A few days later, I bought a modem high-speed HSDPA USB by Alcatel. The problem started immediately that we plugged the modem, that drivers would not install.
  Then I went to the Web of Alcatel site and found the drivers for windows 7 for her. But then we hit another road block since now the drivers are installed and it does not detect the modem, but whenever we try to connect to the internet, screen flickers at the connection for a moment and then disconnects again.

  I found cela a lil strange so I tried to connect using my own pc which has a 32-bit Windows 7 and it works fine there.
  It is the same for a machine that still had Windows XP. Makes me think its something to do with 64-bit Windows 7 itself. Could someone help please?

  Thank you and best regards.

  I don't think that someone here can help you with this problem. You will be very happy if someone on this forum has exactly the same model of laptop including same USB modem.

  In my opinion, you have two options: either you can clarify this point with the support of Alcatel (they have enough experience with own products) or with people from the nearest Toshiba service provider service.

  Have you tried to test the features with the Win7 32-bit version?

• Satellite L300 - problem with the battery and with the FN keys

  Hello

  Please help me with the following 2 problems:

  1. I bought 10 L300, 2009 with Vista, and then I switch to Win7. After that the FN do not work. I can use a couple of access keys, but anyway, they do not appear on top of the scr4een as if it was on Vista. You have the solution to work again?

  2. after the upgrade to Win7, my battery is almost dead. I use 230V taken to work on my laptop. I used my laptop properly and it is really surprised that the battery had a life so short. You have a similar experience or you may have a solution to work again?

  Thanks in advance for your help.

  (1) install VAP (value added package) and Flash memory card Support utility.
  For example, you can find the driver area L500 software.

  (2) you can try to define some battery saving options in the power management Windows 7 in order to reduce the working time of battery.
  I switched to Windows 7 and the battery still works fine.

• Satellite Pro C650D - problems with the audio and game controllers

  Hello

  I recently had problems with my microphone and speakers/headphones and game controllers.
  Sometimes the microphone stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Stakeholders sometimes still work when I connect headset.
  Some of the sounds are still coming through the speakers while some coming through the headphones.

  I have a usb game controller which also did not work everything properly.
  If I assign buttons in the program that they do not work in the game.

  All these devices are in Device Manager in a group that makes me think it's sort of annoying update doubtful that messes with them.

  Any body have similar problems or know what to do better?

  See you soon
  Laurin

  Hello

  Can you please send some details on the laptop model and the system you are using?

  With regard to the issue of sound/mic:
  > The microphone sometimes stops working when on Skype, for example, but most of the time works fine, once again, when I restart the pc.

  Are you talking about internal microphone or external? This only happens using Skype?
  In your case I would test the microphone using different applications to make sure that is not a Skype related issue.

  > Yet sometimes the speakers work when I connect headset.
  I recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65295

  The user has had a similar problem, but this phenomenon was linked to the Realtek HD Audio Manager settings.
  She wrote:
  + In the upper right corner, there is a small yellow folder called "Connector settings" in my version. +
  + There, finally I could re-enable the setting "enable popup dialog box, when the unit is plugged. +

  + So now when I plug an external speaker or headphones, it appears, and I select the option "helmet" (instead of "line-in"), and then the sound only through the headphones/ext.speaker.+

  Regarding the game controller:
  > I have a usb game controller which also did not work everything properly.
  > If I attribute buttons in the program, they do not work in the game.
  I put t think its problem of laptop in my opinion, you must make sure that the controller is compatible with the games you play and also recommended to check some info provided by the manufacturer of the game controller.

• Satellite C655D - problem with recovery

  Hello
  I have the Satellite C655D-S5515 with no additional DVD.
  I want it back or fabric.
  When, during boot press 0, not getting no RECOVERY option not only choose the operating system (Windows 7 only).
  How can I make laptop recovery?

  At first, I must say that since a long time, Toshiba and many other manufacturers of laptop also, doesn t offer disk facility with new laptops. Recovery image is saved on the HARD drive and the laptop owner should create backup recovery, recovery media creation. Its operation is clearly described in the document s user manuals.

  In General, when your laptop has a factory settings and changes nothing, you should be able to begin the installation of HARD drive recovery. I don't know what the problem with your machine and what is the reason why this option is not available, but what you need now is the installation of recovery disc.

  If you don't you should be able to order it. For making this visit https://support.toshiba.com/repair?orderType=SFF

  Good luck

• Cannot run 32-bit application on Satellite L750-A010 with Win 7 64 bit

  Hello

  I had a new satellite L750-A010 with OS win7/64, but I can't run programs 32 versions such as Simatic manager V505, product of siemens. Pls advise how I can fix this problem.

  Thank you all.

  Karam.

  Hello

  I m unaware software Siemens Simatic Manager V505. But perhaps this 32-bit applications needs a version of Win 7 32 bit.
  In this case, you need to install a Win 7 32 bit system on your laptop.
  But I recommend to ask support from Siemens for more information maybe there are a few patches, updates or similar solutions that don t require 32-bit system.

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

• Problems with my mouse, and have not been able to find a solution to the research on various forums.

  Original title: mouse problems

  I have problems with my mouse and have not been able to find a solution to the research on various forums. Here are the symptoms:

  1. you must click several times to get the menus to open. Sometimes they are not just and sometimes they open with a single click flash but do not stick until I clicked several times.

  2 several times the menu drop down and seem to become transparent (not in looks) because when I click on something on the menu, he actually selects everything that is behind the menu drop down. For example, if I'm in powerpoint and you select an item in edit mode, it might work and here again he can just select the slideview behind the menu and expand. Or well, if I'm on a Web site, such as Facebook, and I chose to close the session, rather than enable the disconnection of the key, he chooses some ad is behind the part of the menu and redirects the page of this Web site.

  3. when I try to select a Word, words or sections as paragraphs, it performs several different things: continually select as soon as I let go of the mouse button, the jumps of color selection in another part of the document, or deselects the part of the text before I even let go of the mouse button.

  Here is what I tried:

  1. I had originally a usb wireless mouse. I changed the batteries and then got a new. Now I use a wired mouse.

  2 make sure all updates for Windows and Office 2010 are updated.

  3 has tried to update the drivers mouse, says that it is up-to-date. He restored, did not work. Uninstalled and restarted.

  4 Ran Windows Security Essential and Malwarebytes - found nothing.

  5. ensure that all the Toshiba updates were up-to-date.

  I don't know how the word this issue properly in order to find information about it. Everything I typed in search engines brings me other problems unrelated to this one.

  I am running W7 64 x Home Premium SP1, SP2 MS 2010 with a mouse Dell; Toshiba Satellite C655

  Well I have stumbled on the fix... looks like there was a problem with the HID-compliant mouse. The convenience store hardware detected and solved the problem. Everything seems to work properly again.

• Problem with my Atheros Wifi/Bluetooth Combo card to reboot. in windows 8 pro 64-bit

  Hello I have the following problem with my free wireless/Bluetooth combo card.
  I have personally installed a new combo entered only the material of a third party wireless card
  online market. The device was immediately discovered Windows 8 and installed the drivers that he thinks are best for the device. Both wireless and Bluetooth work as expected and the problem happens when I put the machine power off or reboot the system, Hibernate does not affect the operation of the device. When the system is rebooted / turned from cold start. Windows 8 displays a red X on the wireless icon and Bluetooth does not work. troubleshooting tool and Device Manager act as the device is installed correctly. To resolve this issue, uninstall Bluetooth and wireless both drivers leave system scan for changes, it then reinstalls the device and the system works as expected for both Bluetooth and wireless. I'm looking to solve this problem, I didn't notice any problem yet in the operating system other than windows 8.
   
  Details of important system information:
  Windows 8 Professional. x64bit
  Microsoft Windows [Version 6.2.9200]
   
  Card added to my Asus G74SX
  Operating name: Atheros
  Model: AR5B195 (WiFi: AR5B195) (Bluetooth: AR3011)
   
  The Device Manager shows the follow-up:
   
  Bluetooth
  General tab:
  Qualcomm-Atheros AR3011 Bluetooth 3.0
  Location: Port_ #0001.Hub_ #0003
  Advanced tab
  Manufacturer ID: 69
  HCI LMP 5.39321 a 5.39321 version
  Driver tab
  Driver provider: Qualcomm Atheros Communications
  Driver date: 08/06/2012
  Driver version: 1.0.4.0
  Digital signer: Microsoft Windows Hardware Compatibility Publisher
   
  Network cards:
  General tab
  Qualcomm-Atheros AR9002WB-1NG
  Geographical area: PCI Slot 1 (bus PCI 3, device 0, function 0)
  Driver tab
  Driver provider: Microsoft
  Driver date: 03/07/2012
  Driver version: 3.0.0.130
  Digital signer: Microsoft Windows
  Driver file details:
  C:\Windows\System32\DRIVERS\athrx.sys
  Provider: Qualcomm, Atheros Communications, Inc.
  Version of the file 3.0.0.128
  Digital signer: Microsoft Windows
  C:\Windows\system32\drivers\vwifibus.sys
  Provider of: Microsoft Corporation
  File version: 6.2.9200.16384 (win8_rtm.120725 - 1247)
  Digital signer: Microsoft Windows
   
  Error Viewer:
  Task category: (16)
  The description for event ID 15300 source WPDMTPDriver is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
  PSG WPD driver

  0 x 80070002
   
  Source: BTHUSB
  Event ID: 17

  The local Bluetooth adapter has failed in an indefinite manner and will not be used. The driver has been unloaded.

  I guess the problem with my card is out dated drivers for my wireless card.

  (SOLVED)

  I at first sight, that this would not help, as it does not address the question, or the other.

  1st stage however was a yellow triangle! Sign up for troubleshooting. reboot and I checked for internet/bluetooth. I got my net upward and did two step, windows told me, he had the best drivers for the device. I went to the menu where you select wireless cards then. and it occurred to me, for some reason my wireless card had been cut, and troubleshooting of windows didn't catch it. My G74SX, so now like with most laptops, has a Wireless on and off function, I pressed the button for this and then on my bluetooth and windows wireless. I then tested the function of these two, and did a reboot and shutdown, test market and the system works perfectly. Now, I wonder if that was the problem at the beginning.
  Thank you.

• Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. Mozilla Heve problem with images?

  Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
  When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg

  whith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.

  any idea?

  Thank you

  Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
  Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do...

• How can I return to 6.3 4.0 I have never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  How can I return to 4.0 3.6 I've never had a problem with 3.6 and now 4.0 crashes all the time tell me how to go back

  Downgrade to Firefox 3.6 first of all uninstall Firefox 4, but do not select the option 'remove my Firefox personal data '. If you select this option, it will delete your bookmarks, passwords and other user data.

  Then you can install the latest version of Firefox 3.6 available to http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your favorite courses, passwords etc.

  I recommend, to avoid possible problems with decommissioning, accessing your profile folder and delete the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Delete these files will force Firefox to rebuild the list of installed extensions, check their compatibility and cancel the toolbar customizations.

  For more information on how to find your profile folder, see https://support.mozilla.com/kb/Profiles

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• Problems with Windows Update and load XP SP3

  I had a problem with my system and had to replace my HARD drive and reload XP and all my applications and data.  Now, I installed SP2 and try to install SP3. Windows Update does not work (get the 080244019 error code x) and when I try to install the SP3 files from the Microsoft site, it'll run about halfway through and then stop and hang, displaying the message "Finish Installation" with bar at halfway of the progression.  I tried the MSRT and FixIt nothing helps.  I checked services.msc to see all the required services are enabled or started.  I read that some malware will be stop some services without notice.

  After a few attempts to load the file SP3 failed, check Add/Remove programs in Control Panel Windows XP Service Pack lists 3 but no file size or to update the date information as with other programs.  My browser is IE8 and I was doing some Hot fix for Windows XP downloads, this adventure started about 3 weeks ago, but no other automatic update downloads.  I use the following McAfee provided by my ISP for protection AV and firewall with regular full scans.  Scan today revealed there is apparently a single trojan file that cannot be deleted, but there were no further details.  My system is also fully functional; I seem to get the updates for McAfee and other applications OK but not SP3.  I received or otherwise installed following updates or Hot Fix for XP downloads in the past 3 weeks:

  KB954550-v5

  KB932823-v3

  KB915800 v4

  KB884020

  KB926239

  KB2618444 (Windows IE8 security update)

  I found an answer on another forum on editing the registry for the "/ Edit EDWARD CSDVersion value ' but have not yet tried waiting for any response to this request.  I'd like some useful suggestions.  Thank you and happy new year!

  Thanks for the quick response.  I did some checking on my system, I have XP Home Edition ships with the system bought in July 2007.  Add/Remove Programs shows that the aborted install XP SP3 and IE8 installation; I tried to load the SP2 file but it doesn't show here as an addition, so it may have been part of the original XP CD and I just crush.  Even for IE7 so I am not able to drop back to all recommend you.  I will try your solution later today and post my results. I saved SP2, SP3 and IE8 in my office and a flash player to reload later according to your instructions.  Stay tuned.

  It would be unusual for a CD of Windows XP (official) to have integrated Internet Explorer 7.