Satellite L750D - configure switchable graphics don't is not updated

Similar Questions

• After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) restart you device.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892

• HP Pavilion G6-1242ee: Configure switchable graphics button is missing!

  Hello.

  I went to my device manager and click with the right button on my graphics card to day. The update succeeded without any problem.

  2 pilots that I displayed view:

  AMD Radeon HD 6470 M and Intel HD graphics Family.

  These are the drivers that I have had since I have this pc.

  For some reason any after I rebooted my pc (to complete the update), I could see no longer the switchable graphic button to set up, and when I click on my AMD control center button, I get an error saying: Catalyst Control Center Host has stopped working.

  Help, please!

  Thanks for the reply, I solved the problem by updating manually to the latest drivers for my card now, the button is back, as well as the control center.

• Switchable graphics can I or not?

  My T61P with NVIDIA graphics died on me on Friday. I was 'under the gun' and tried to recover quickly and decided to replace it with another series of T. I scored a 'Fixer' T500 (2422 7VU; 09/09 xxxxx) off the coast of craigslist. He acknowledged my T61p Windows 8.1 Pro system disk and booted up immediately. After downloaded and installed all the drivers I could find, it is not clear to me if I "switchable graphics" or not. I have a mini dock and a configuration double monitor. My main screen of Lenovo is 1280 x 800 and the single display showing driver is "Mobile Intel 4 Series Express Chipset Family (WDDM 1.1)" my secondary display a Samsung SyncMaster EX2220 turn in 1920 x 1080. It is connected to the DVI port on the mini dock. I installed the ATI Catalyst Control Center and "Switchable Graphics calculators", but I don't see an ATI display adapter in Device Manager. If I click with the right button on the desktop and select "Catalyst Control Center", two processes started. 'ccc.exe"(Catalyst Control Center?) and"MOM.exe"(monitor?). I also noticed that after that these two processes are started, my installed memory falls from 8 GB to 7.91 GB. I have installed the Thinkvantage Power Monitor but when I select 'High performance' in Control Panel Power Options "Apply" is "grayed out" if I try to start one of the programs in the Catalyst Control Program Files folder, that nothing happens? Do I not have an installed ATI chipset or not? If so, how can I make this work?

  I have not cracked open except to install the memory, although I'll probably do so soon. The CPU fan has a really annoying rattle. That will certainly tell me more, but maybe someone knows the answer. Compared to my T61p with NVIDIA 570 M this system feels a bit slow and jerky video.

  Any idea would be appreciated.

  Comment to Moderator: Order number deleted to protect members of wrongdoing.

  2422 7VU isn't a real model. Do you mean 2242? If so, 2242-7vu integrated graphics only

• Switchable graphics problem - settings are not saved

  Hello

  I don't know if I posted in the right category

  I just bought Acer Aspire E1 572 g which had amd 8670 M built in. I'm having a problem with the switchable graphics when I ever I save a setting for an application he doesnot registers and changes are back to "Unassigned". I tried looking for drivers times that they are more recent or not, and they were more recent, please tell me if anyone has a solution.

  Hi Ammar,

  Thanks for the reply.

  This question needs an advanced troubleshooting and for this I suggest you to contact Acer community who are experts with advanced tools and permissions to help you with such questions.

  http://community.Acer.com/T5/discussion-forums/CT-p/boards

  Hope this helps, please get back to us for additional help on Windows. We will be happy to help you.

  Thank you.

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• HP Pavilion p6-2133w: graphics card will be not updated of the drivers

  My Amd Radeon HD 6530d will not update the drivers I have tried everything to update the drivers from 15.201.1151.0 to Crimson Edition Beta 16.2.1 any help will be appreciated

  @drago72, welcome to the forum.

  Normally, the drivers other those provided by HP will not work with their motheboards.  I suggest you go to Device Manager / graphics cards / right click on your video card / select Update driver software / search automatically for updated driver software.  If there is an updated driver, it will be found and installed.  If this is not the case, he will tell you that it is up-to-date.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Thumbnails of graphic files only do not update after editing files

  Thumbnails for .jpg files, and other graphics files not updated when files are changed, so that thumbnails are not always the content of the graphic file.

  Hi Gabriel,

  Welcome to the Microsoft Answers site!

  When you save the file that you have updated?

  You can do a Disk Clean Up and next time when you open the folder thumbnails will be rebuilt and everything should work as you wish.

  To perform cleanup utility disk

  1. Open Disk Cleanup by clicking the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.
  2. In the drives list, click the drive you want to clean, and then click OK.
  3. In the Disk Cleanup dialog box, on the Disk Cleanup tab, select the check boxes for the types of files that you want to remove, and then click OK.
  4. In the message that appears, click delete files.

  This should solve your problem of thumbnails not to get updates.

  For more details follow the link below.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• is it necessary to configure switchable graphics?

  I have Del Inspiron N5520 HD4000 Intel have provided with the Intel Core i7 processor and a separate video card, the AMD Radeon HD M 7670 , the user can choose to match labour
  What is the graphics processor...?

  After every 3-4 minutes, a window appears and says that the application (for example xyz.dll or commandos.exe uses 3D graphics or video but is not currently associated with specific graphics processor to select a processor for the click of the application configures /)

  It is necessary to associate the graphic processor for applications... or what app I associated... ???

  I don't have a laptop or a PC with integrated graphics, but I think it would be wise to combine all of your games 'high end' to the dedicated graphics card. Some games low spec can be OK with the HD4000 whether Intels best integrated graphics offering. Use it with suitable games will save on power.
  Most other applications, even videos should be fine with the integrated graphics card.
  Once everything has been associated with the card or the HD4000 you shouldn't
  have to do it again.

  The link below has a number of game guides. As you can see, most of the high-end games would need all low settings to work with a decent rate (30 frames per second or more) when you use the HD 400 graphics.
  http://www.notebookcheck.NET/Intel-HD-graphics-4000-benchmarked.73567.0.html

• Satellite P200-1I4, the graphics card can be changed/updated?

  Hi, recently bought a laptop and was wandering if I could install a better graphics card in this model? It came with: Intel GMA X 3100

  THX

  Hello, Tommy

  Unfortunately graphics card can not be changed or updated. Hardware for laptops is designed on a different path with respect to the workstations and the graphics card is part of the motherboard.
  Sorry but there is nothing to do.

• Configuration of virtual switches that are not updated

  In a vSphere infrastructure 5 based on 2 servers ESXi 5, I moved a few virtual machines to one virtual switch to another.

  Virtual machines work very well.

  If I use vSphere client and look at the configuration of the hosts (host and cluster-> Configuration-> Networking) I see some VM as they were connected either the old virtual switch and the new virtual switch, while they are only connected to the new virtual switch.

  I press "Refresh" without any result.

  If I look at the properties of each virtual computer, I don't see the link to the new virtual switch.

  How can I solve this problem? It is dangerous, even if it does not affect VMs or virtual switches, because it can make operators make mistakes...

  Concerning

  Marius

  Nothing dangerous. You probably have Active snapshots on virtual machines. Once the snapshots are deleted, the 'old' vSwitch and port group will disappear.

  André

• Lenovo Center's Solutions don't poster not updates to driver/BIOS?

  Hey all,.

  Got a new 55-H50 (AMD) and G50-45 today and updated everything, including the LSC. Desktop or portable LSC say to go to the Lenovo website for updates to the firmware/BIOS, and they both require BIOS at least. I can not really work if nothing else needs to be updated or not.

  Any suggestions?

  Thank you

  Callum.

  I don't think that it has no application to display updates of drivers or software outside the brand of products that come with the thinkvantage system update, think

• Windows 8 apps don't are not updated and download

  Hi, recently I started to use Windows 8. It set up perfect, but some applications do not work and I can't download apps in store windows. When I connect to my PC, a message arrives he says, a framework is needed to download and install, other wise some apps will works not. But I installed the last frame. What is the problem? And how to solve?

  Hello, Josée.

  Thanks for posting your query on Microsoft Community forum.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You are connected with a Microsoft or a local account?
  2. What are the applications outside of the app Store that do not work?
  3. All Windows updates are installed?

  4. Do you use a proxy connection to connect to the internet?

  5. You have security software installed on the computer?

  You can try to follow the steps described in the following and see if it works for you.

  Method 1:
  Step 1:

  Please go to the link below, download the file and run it.

  Run applications troubleshooting

  Download and run the troubleshooter modern UI App.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Step 2:

  I suggest to go through the link and follow the given procedure. Here is the link for your reference.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  After the execution of the method 1 try to open applications. If you are still unable to open applications and download from app Store then try to follow the methods below.

  Method 2

  Check that the Date & time zone is correct or not:

  Follow these steps to change the time.

  1. Double-click the current time on the lower right of your screen.

  2. Then click on change time date, then click on the button to change time zone

  3. Select your time zone and the tick to automatically adjust clock for time, then press OK

  4. Then press on apply and OK.

  Method 3:

  If you are using a connection through proxy, then try to disable the proxy and then check if the problem persists.

  Follow the steps to disable the proxy:

  1. Open Internet Explorer
  2. Click the Tools button, and then click Internet Options
  3. Click the Connections tab, and then click LAN settings
  4. Uncheck the Server Proxy use.
  5. Click on apply then Ok to save the changes.

  Now, check if you have access to app store.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Record in the table don't is not updated correctly after sail of detail page

  I have 2 jspx pages (page A) a table showing the employee record, another a (page B) is used to update the file of the selected employee. On the page, when the button select a folder and clicking on the 'details' I may be navigaed at pag B on which I can edit registration information in a form component. I have a table column 'Prospect', which applies to a LOV layer VO pageB I use < af:inputComboboxListOfValues > to display a combo of LOV for this attribute, when I enter a new value here and save it, I can go back to page one, but the name of the team for this record shows empty, by querying the database that I find the record updated successfully with the changed value. And when I reloaded the page this record may indicate the new team name value. Why it is not updated in the employee table, when browsing immediately return of page B? I put the table attribute to 'always', but always refresh iterator not. Can anyone help with this? Thank you!!
  
  BTW, for the other columns (not LOV), they are ok, the table can display the value correctly.
  
  Published by: user774592 on July 14, 2011 19:56
  
  Published by: user774592 on July 14, 2011 21:59

  What component to use to show as filed?

• HP Pavilion 2307tx g6: lack of switchable Graphics Options

  Prouct: HP Pavilion 2307tx g6
  OS: Windows 7 ultimate (64 bit)

  Product number: D4B15PA
  Graphics card: Intel Graphics HD 4000/Radeon HD Graphics 7670 M

  Hello. I need a help or instructions of my situation. I have a problem, look for the switchable graphics options for my laptop. The original operating system of this is Windows 8 64-bit. I changed my operating system in Windows 7 Ultimate 64-bit. After you have installed the necessary drivers for my laptop, I noticed that the switchable graphics options configure is missing, even the AMD Catalyst Control Center. I installed two drivers properly after installation of Windows 7, but AMD graphics options is missing. I tried to update my driver AMD by installing the latest driver, subsequently software Catalyst through the utility of automatic detection, but after installation, my laptop screen became large, and the option "Configure Switchable Graphics", said that the driver I have installed is not compatible with my laptop. I opened the system restore back to a point where I have not installed yet. I'm not sure if I should install the AMD driver that I found here in the HP drivers. If anyone knows how I can reinstall the driver of my need of system, I would be grateful.

  Thank you

  RD18

  Hello:

  Because your laptop is the switchable graphics, the driver only graphics that you can use is the HP one.

  I don't think that HP has linked the AMD/Intel switchable graphics driver to the correct address to the care of your laptop and driver page.

  Uninstall the graphic drivers you have already installed and restart... but instead, try this one g6t-2000.

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp58894.exe