Satellite L755 - 1 6 - host USB 3.0 controller shows yellow flag suddenly

I bought a 6 w / Windows7 L755 - 1 x 64 a few days ago. "Renesas Electronics USB 3.0 Host Controller" was working properly, I am using a CnMemory Core 1.5 TB drive. I used the drive in the last days and the transfer speed was fast.

Unfortunately today the drive suddenly recognized no more. In Device Manager, the controller is marked with a yellow sign and the error that says "the device cannot start. (Code 10) ». There is no hub listed for this controller.

The driver version is 2.0.32.0. I've already tried
-removal of the device
-uninstall the device
d ' use the version of the driver www.station-drivers.com 2.1.28
but without success. So I returned to the official driver Toshiba 2.0.32.0 version.

I searched the forums and google this error but I couldn't find a working solution. In the Windows Update history there are only two updates for Windows Defender listed since last week, so there is no system of major updates that could cause this behavior.

Any tips?

Thank you very much
Dennis

Hello

Maybe you should install the driver USB 3.0 required.
I found the driver for v2.0.32.0 USB 3.0 on the European driver Toshiba for L755 page

http://EU.computers.Toshiba-Europe.com-> supported Downloads &-> Download drivers

Choose here the Satellite L755 pilot area

Tags: Toshiba

Similar Questions

  • Vodacom k3772-Z not detected on Satellite L755 USB 3.0 port

    Good day to all,

    I kinda a strange problem, the company that I work received point on the toshiba Satellite L755 PSK2YE and a box of vodacom K3772-Z modems for distribution to our customers.

    We picked up that these modems are not detected at all when plugged in the port of USB3 laptops left side (we tried 3 modems on machine Ong 3 with the same result each time)

    Modems work perfectly well when it is connected to the usb ports on right 2 and all the rest that we connected to works of 3 usb port very well including older models of modems.

    I also tested the modem on another machine of 3 USB (also using the usb controller 3 renesas) and it works beautifully.

    I have notcied that if you disable the usb controller 3 on the laptop and turn it back on with the stick of 3 g connected to the unit is detected correctly however if you unplug in and try again once it does detect it yet.

    It's using the latest drivers and firmware.

    I tried to find a solution online but had no chance.

    Any ideas what could be the cause?

    > Modems work perfectly well when it is connected to the usb ports on right 2 and all the rest that we connected to works of 3 usb port very well including older models of modems.

    From my point of view it would mean for computer laptop USB 3.0 port works correctly and, possibly, there is a compatibility problem between the modem and the USB 3.0 port. Maybe you should contact check the modem manufacturer support page for more information

    I read on some forums that many people had problems to install this modem using Win 7 64 bit with 32-bit system was not a problem, someone used the drivers released for modem K4505.

    Someone else solved this facility a 10.2 Vodafone
    + 1. Go to start menu.
    + 2. Run regedit +.
    + 3. Open this key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E96D-E325-11CE-BFC1-08002BE10318} +.
    + 4. In this key, search for the string of Installer32. +
    + 5. If missing the Microsoft registration key, the key must be added manually. +
    + 6. Create a string value named Installer32 and assign the mdminst.dll, ClassInstall32 +.
    + 5. Save the regedit +.
    + 6. Open the device manage +.
    + 7. Find the modem with the problem; uninstall it and let windows detect it again (or search the hardware changes). +

  • Need driver USB 3.0 for my Satellite L755-1J9

    I'm from the Spain and after doing format C: in my Satellite L755-1J9, I can't install the driver USB 3.0 instead of Toshiba drivers download in this Web page.

    Someone who has this driver can help me please?

    Hi Enrique

    According to the specifications of the computer laptop your machine was shipped with preinstalled Windows 7 64 bit and this original recovery image contains all the necessary drivers, including the driver of USB 3.0.

    The question is: what did you do exactly? Did you install original version of the OS that you got with your machine or clean version of Windows and which one.
    If you're still using Win7 64 bit driver for USB 3.0 you can find here.

  • Ports USB 3.0 on Satellite L755-1LM

    Hello

    I have a 2 years Satellite L755-1LM. The leaflet said that he might have a USB 3.0 port, which was an option on some models.

    Is there an easy way to know if my model for this? I learned that USB 3.0 ports have a blue insert rather than black, but I don't know if this is true in all cases (mine is black). I am attaching a standard HDD USB 3.0 on the left USB port, which could be 3.0, but the transfer rate is poor. Therefore, it is either 2.0 only or I'm missing drivers etc.

    Any thoughts?

    Hello

    According to specification of your machine specifications has ports USB 2.0 only. The difference is that only one port on the left side support option sleep and fresh.

  • Satellite L755 - Flash USB memory is not recognized correctly

    Hi gentlemen

    I (ScanDsik 32 GB flash memory) she used to work properly, but last week it was late to work when I connect it to the laptop Toshiba Satellite L755 and now when I connect it I can't open it I see in Device Manager, but can not open and not properly recognize the flash memory is established in another laptop and computers only in my laptop now does not.

    I ve format into another one of these computers is Toshiba laptop too, I reinstall usb driver, but same, please could you help me?

    Have you tested the feature with others, like USB keys?
    Are you using the original OS that you got with your laptop?

  • Issue of recovery with Satellite L755 - 12G - blue screen at startup

    Hello, my name is Johann and I'm from the Germany (sorry for my bad English, I hope you understand)

    I have a TOSHIBA

    Type: * Satellite L755 - 12 G *.
    REF.: * PSK2YE-03E015GR
    Serial number: * 7B144840W *.

    My problem is that I have a blue screen before I can take my profile on windows 7. The theme of the blue screen, it's that I have a hardware problem or software.

    I don't have a recovery CD, it's ON my HARD D: drive / or C: /.
    But I can't, because I can't get my profile. So every once in safe mode, I have a blue screen. In normal mode, I get a blue screen, so im very disappointed.

    * I am looking for driver * or a tutorial to remove my C: / to reinstall windows 7.
    In the BIOS I don't know what I have to do, I'm not a real + PRO + to make sure.

    I am looking for a driver or programs for recovery USB STICK. I want to start the CD or the USB STICK for my laptop. you have this type of program? I hope, or please send me a link to a driver, on the original site of TOSHIBA.

    OK, thanks I hope you understand...
    My English is not 'if' well... NO, it's bad. :)

    Thank uuu.

    Good, thank you

    Hello

    Reinstall the recovery feature by image and test with the factory settings.
    Please visit this link - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

    You will find a detailed how install HARD drive recovery image.

    Please post comments.

  • Satellite L755-16J - problem with sound card

    I currently own a Toshiba * Satellite L755-16J * and is having some kind of trouble with the sound card, I think.

    When I bought it, it came with windows 7, I changed the Windows of windows 8 and since then the audio has been trouble me.

    The internal speakers work for a minute or two, when I play an audio file, but then stop working.
    I had been using a usb external sound card and external speakers for some time but decided to the switchback to windows 7 for the sound working again. even if I went to win 7, the sound still doesn't work.

    I am sure that the problem is not in the internal speakers because they do not work, even if it's just for a brief moment, but they work, so I think the problem is in the software instead of hardware.

    I tried to update the audio drivers but they seem to be updated as windows, pilots 'seem to work properly.

    Can anyone help?

    > even if I spent back for win 7, the sound still doesn't work.

    How did you do that?
    Have you used the Toshiba Recovery disk in order to install Win 7 or have you installed Windows 7 using the Windows 7 clean and fresh hot?

    The laptop supports the Conexant audio chip. The audio driver is available on the page of the Toshiba UE driver and where the sound chip is already recognized in Device Manager after installing the audio driver, I assume that the driver has been installed correctly.

    In this case I recommend you plug in a headset.
    In case the headset should work fine, the speakers could be affected. I mean the material. But of course it s just an idea.

    Next to the audit of the helmet, you can also check the settings in the Panel of-> sound-> the Read tab.
    Usually, the speakers should be set as default device.
    Check this option too.

  • Virus has damaged Satellite L755 - 17Q - now cannot load

    Satellite L755 - 17Q

    I accidentally downloaded a virus, that virus I think and then turned off my computer and now once I try to load it, the Toshiba screen appears, but then the screen goes black with just a small bar flashes in the upper left corner. I gave this administrator rights program because I thought it was safe. Now I can't use my laptop, what should I do?

    Any help is appreciated.

    PS I'm rubbish with computers.

    It depends on you. You have some important data stored on the HARD drive?
    If this isn't the case, I recommend you to reinstall the OS using Toshiba recovery disc.
    By default the BIOS settings and reinstall the OS.

    After that what you do will have own OS preinstalled and no anyomore disorders.

  • Sound on Toshiba Satellite L755 - 1J9 PSK2YE problems

    I have a laptop Toshiba Satellite L755-1J9 PSK2YE maybe it's coincidence but was upgraded to Windows 10 and stopped working the audio.
    Thinking that it was Windows 10, Formate of the computer and install Windows 7 but still the same, the sound works for 5 minutes and cut until you put another video.
    If I connect a headphone or Audio HDMI is not cut ever.

    I noticed it happened to most Toshiba laptops, but I found no solution. Anyone know any solution?

    I got into ubuntu to test the audio and the same thing, to five minutes run out sound until you put another video.

  • Satellite L755-t no stopping Windows 8

    Today I am facing problem when I press the button stop the laptop go to sleep and when I opened the laptop lid start on, this problem is new to me any idea please help?
    Toshiba Satellite L755
    Windows 8 MC

    Check - http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm

    This allows to perform full stop down?

  • Satellite L755-S5368 - PrintService error event ID 372

    I have a laptop Toshiba Satellite L755-S5368 with Windows 7 64 b. I have a printer HP 1020 LaserJet printer with the latest version of the software HP lj1020-HB-pnp-win64 - .exe I can find at HP. The printer works fine, but every time I have to print something that an error message is recorded in the event viewer.

    I googled but found nothing that corresponds to what I mean. Everything I saw on goolge the printer would not print, but mine print very well.

    Does anyone know how to get the event viewer to stop recording the code whenever I feel to the printer HP laserjet 1020?

    Event ID of Source-PrintService-372 error level

    Microsoft Word - 2012-2, owned by the YYY, document cannot print on a printer HP LaswerJest 1020. Try printing the document again, or restart the print spooler.

    I get this every time I print to the printer laserjet 1020 with Acrobat, Word, Excel, Notepad, etc. As I said, it prints well, but I want to get rid of the error code stored whenever I print.

    I posted this to two sevenforms more HP support forums, I didn't get a response from each site.

    The error message says something about
    > Try printing the document again, or restart the print spooler

    So, try this workaround:
    Stop the services.msc print spooler service.
    Delete the contents of the C:\Windows\System32\spool\printers folder.
    Restart the services.msc print spooler service.

    Good luck

  • Satellite L755-M1DU - I deleted Utility of Toshiba Flash Cards

    Hello

    Satellite L755-M1DU
    Part number: PSK2YE-0DU02UAR

    I lost my phone :(

    And I accidently deleted (utility of Toshiba Flash cards)

    What can I do? And where and how do I get maps Flash appears when you press the function key?

    Thank you

    Why this link does not work?

    Mid-loading of the switch?

    + The message was edited: link has been removed.

  • Satellite L755-1ED - sound is not working properly

    Hello

    I am currently the owner of a Toshiba Satellite L755 1ED and the sound does not work as it should for a few weeks. When I try to play an audio file or a video, its offline or online, works well for the first few minutes, and then suddenly disappears. I use Windows 7, and when that happens, his is still known for the system as you can see in the volume control, but any noise is coming from the speakers. However:
    -If I pause the video and then repeat it in like 30 seconds, sound usually comes back. Also if I go to Sound Settings in + material and Sound + in the + control panel + and then try to check if it works, it's usually after the first or second attempt.
    -If I use headphones always works perfectly.

    I have already installed the latest updates of my sound card and I don't know where the problem is maybe. Some help would be welcome.
    Thank you very much and sorry for my English (is not my native language).

    Post edited by: BleuHiver

    > If I use headphones always works perfectly.
    Very interesting article. Speakers a little internal switch port that helps mobile to recognise that the earphones are connected and when you connect headphones, internal speakers will be disabled and the sound comes through the speakers only.

    On some machines, it is possible to manually switch between external and internal contacts

    When you open Control Panel is Realter HD audio manager available or maybe Smart audio?

  • Satellite L755-M1M3 driver sound problem after upgrade to win 10

    Salvation;
    I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?

    Inability of Toshiba to make the solution, always shocks me. !!! ???

  • Satellite L755-11J: its delay via HDMI if the microphone is connected

    I have a Satellite L755-11J and when I connect it via HDMI but the movies and MP3 sound is perfect and synchronized.
    When I plug a mic, I have a delay of about 1 sec.

    My sound card is Conexant and I installed the latest drivers. (ver.8.51.1.0).
    I tried all the possible configurations in the properties of the Microphone, but the problem persists!

    Any solution to this issue?

    Hello

    Check the status of the webcam in Device Manager
    Can you see the webcam device in Device Manager?

    As I remember the webcam can be disabled and enabled in the BIOS.
    Please check if the webcam is enabled in the BIOS.

Maybe you are looking for

  • XW6600 + GTX 760?

    Hello I have a question: Short version: 760 GTX graphics card will work with XW6600? Long version: I have XW6600, 16 GB RAM, 1 x E5440, 2 x Velociraptor 300 GB, DVD, Asus EAH6850, STD 650W PSU - which works perfectly. I want to replace by a more powe

  • Tornado of Washington area, Illinois erased all the info to the computer's printer

    Washington Illinois Tornado caused computer crash, wipe all the drivers on my computer.  Now, try to reinstall but am running out of problems with the hp site that requires the purchase of the pilot program to do.  Have given everything I can to my n

  • Cancel the task which is not yet completed writing

    I'm generating analog signals via DAQmx - these signals may be > 10 seconds long by necessity (the sampling frequency is very low). I would like to be able to stop the release of the wave when I press a button. What happens now, when I use the clear

  • How to recover the hard disk Vista on XP

    My laptop won't boot after an incident of freezing.  I suspect that there could be a problem with the processor. I removed the hard drive from my laptop (Vista) and hooked it up to a speaker. Now, I have access to the hard drive via another computer

  • Sansa Clip - stuck on the refresh database... I don't know how go you to the SMC is stuck on the refresh database...

    Hey guys,. I had to look around the forum without result... Have a new Sansa Clib 4 GB... Spend 2 hours sorting of a list of synchronization... (Who has no record on a playlist... ) Put on I "Refresh database" at about 20%, which is frozen right ther