Satellite L755D-10U: cursor blinking after replacement of Wlan

Similar Questions

• Satellite L755D-10U - I want to restore to out of box state

  Afternoon, I have a Satellite L755D-10U and want to restore the factory settings.
  I tried to create a recovery disk using the recovery disk creator but I got two errors.

  One is in "all programs, toshiba, then recovery disc creator" and shows an error of missing shortcut of TRMCLcher.exe.

  The other by the bias of my taskbar and said "No HDD Recovery Area". The recovery partition is still in my D: to 12.5 GB in size.

  I have not yet tried the power down and zero route again as I would like to know if restoring to factory settings will erase all data on my Partition D. I got all my University stuff on atm here and even if I can save to another drive also I want to know if it will erase the data on the disks.

  Cheers in advance for any help

  > One is in "all programs, toshiba, then recovery disc creator" and evokes a mistake of shortcut missing TRMCLcher.exe.

  TRMCLcher.exe means that Toshiba Recovery Media Creator Launcher and this exe file should begin the process of recovery, but it doesn t.

  Why? Who probably knows the system has been confusing upward or something has changed on the HARD disk partition.

  The same pattern may be why no. HDD recovery area message.

  Always is it that there are two options to recover the notebook:
  (1) recovery disc (not possible because you n t have a)
  (2) HARD drive recovery option (check if this is possible: turn on the device, press F8-> fix my computer-> HDD recovery)

  If the two possible isn t, you need to recovery disk to perform the recovery procedure.
  http://backupmedia.Toshiba.EU/landing.aspx

• Satellite L755D-10U: Wireless Communication switch and fixed to off

  Satellite L755D-10U part number: PSK4YE-00J00HEN

  I've had this laptop since June and have been very happy with it
  Last night no reason apparent, the wirelsss set itself off and I cannot turn on again.

  Have you looked in the settings of the flash memory card - everything is ok

  Any help would be appreciated I need to be able to use the wireless function.

  Hello

  The WiFi network can be switched on and off using the FN + F8 function.
  Did you check that? Note that Fn + F8 turns and BT too so don't forget that Wlan was chosen and not BT!

  But the Fn + F8 functions if the WiFi card driver is correctly installed.
  If there is something wrong with Wlan driver, then the Fn + f8 would not work too.

  This is why an update of the driver might be useful too.

• Satellite 1410 714 extremely slow after replacing HARD drive

  Hello

  I have a Satellite 1410-714 which has had a hard drive failure. I replaced the drive, but now the computer is extremely slow. Windows has been reinstalled, it was really slow too much and now it takes minutes for windows to start.

  I suspect that something might have broken on the motherboard and the hard disk. I checked mobo replacement parts, but have not found anything for-714, so a 1410 mobo compatible? This model has a processor celeron 1.8.

  Thanks for help.

  Hannu

  Hello

  I can t think the motherboard is broken after replacing HARD drive.
  I suggest updating the BIOS first. Maybe your old BIOS have a few problems with the most recent HARD drive.
  Please check site driver Toshiba for the latest version of BIOS.

  Have you used any anties Virus applications?

• Where can I order a recovery for Satellite L755D-10U disk

  Hi, my son bought a L755D-10U Satellite in July 2011, two days ago, I turned to see failure to look me in the start screen. I can not even recovery is pretty scary, because it suggests that there is a hard drive problem. Could I have some help and suggestions here please you that while I can understand what is happening on my computer two weeks ago, my own equipment is 9 years old and has been planned, however, my son is 3 months old and should not have any problems at all.

  Thanks in advance
  Tuppence:0)

  This page;
  http://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Photosmart c3150 check ink cartridge blink after replacing the cartridge

  Almost every time I have to replace a cartridge check ink cartridge blinking and I can not find anything wrong.

  If the led check cartridge blinking after changing a cartridge, then there is a document with steps to help solve this problem. The document can be accessed here.

  Hope this helps Richard.

• satellite 2520cdt is very slow after replacing HARD drive

  My Satellite 2520 CDT is the HARD Mk 4309 MAST 4.3 GB default disk. I replaced the with the Toshiba MK 2016 GAP of 20 GB.
  I use Windows 98 since the original installation CD. The laptop is now very slow, it takes minutes to start programs, etc.

  I installed the latest BIOS with no improvement. Probably the laptop cannot manage the size of the HARD drive.

  Is there a solution?

  Hello

  I had the same suggestion. I think that the large size of the HARD disk is responsible to slowly start performance. But I wonder why BIOS recognize the HARD drive?
  However, try to defragment the HARD drive.

• Satellite C650, media recovery fails after replacing HARD drive

  I have a 3 years C650, and the HARD drive has failed. I got a replacement drive and sorts to recover from the recovery media disks that I created and although he claimed to have re - partition the drive and reinstalled windows, windows startup fails when tried to configure the devices "could not configure windows to run on this hardware.

  After this error, the boot sequence goes into an endless loop, asking to start the installation procedure.

  Thinking that my records may have been corrupted, I ordered a set of Toshiba recovery disks. Once again, these go through the recovery process and still once, Windows startup does not exactly in the same place.

  A little annoying to have spent £30 for nothing.

  I have a picture of Windows system on my external HARD drive, but I can't get the machine to a point where it will actually start so I can recover from that.

  Any suggestions on how to proceed is welcome!

  Thank you
  Martin

  Hello

  Of course, this isn't a problem of recovery disk.
  I guess there is a problem with the HARD drive but I n t think that the HARD drive has failed I think there is a problem of setting

  First, you should go to BIOS and check if the SATA set to AHCI.
  Then you should also format the HARD drive again.

  I recommend to use the freeware tool called GParted. You could create a live USB stick bootable flash memory which will allow you to start the unit and start GParted tool.
  Format the HARD drive, and then create a partition.

  After that, take the recovery disk and start the recovery procedure.
  Good luck

• Satellite L850-P13 - no backlight after replacement Panel

  Hi, I cracked Panel. Sister felt on nightmarish and sit on the screen while the computer on couch fully open the cover and the machine didn't work. A leak under the layer of glass crystal. His soul left to heaven. Sister is OK.

  Brief inspection found that the NB is still alive (not a form), connected to the Panel external vga everything worked OK.
  New Panel has been ordered. After reinstalling don't got no backlite. The screen is dark, but it is posible to see content at the if backlit screen with torch or a lamp. It works, just right on the 'dark side '.

  First of all, I can't POST when the external display is connected. It shows the picture when windows starts already.
  That's why I dare not upgrade the BIOS which is requested by the control center of Toshiba or else called this thing running on the system. He also asked for updated video driver as well what I did, but no difference.
  On the list of hardware-, on the screen, I see two devices. Both are recognized as generic display. Others need an external display.
  Is this normal? I mean, at least panell LCd must be recognized as something else then "generic"?

  Before replacement Panel has been ordered, that happens to have another L750 broken (it has been washed with water in IT). Repair service send it back as a "total damaged."

  I tried to put the sign of it in the hope that works and he did.
  Signs was perfect matched (make and model). And it worked. Brightness was not the best, and there was a distortion in the image of the screen and flashes.

  So it was not helpful for the repair. I have spend PCs and the couple of times.
  Whenever the brightness drops down. Finally, I gave up trying and order/waiting for the new Panel.

  When a new arrived, got no backlight at all as mentioned above.

  I would like to know how to get an external display to show the POST early on how I would be able to enter BIOS or BIOS update utillity?

  Any idea what causes lack backlight having in mind describes the behavior of the backlight during test with notebook Panel "processed water"?

  > To the list of hardware-, on the screen, I see two devices. Both are recognized as generic display. > Other should be external display. Is this normal? I mean, did at least LCD display should be recognized as something else then "generic"?

  Yes it's OK, the darker scree are certainly not a driver problem.

  AFAIK the L850 series was equipped with various billboards.
  Some were equipped with a sign supporting the side light CCFL (a fluorescent cold cathode) and some were equipped with the fire side of LED (LED backlight)

  Do you have a good showcase?

  The display unit has a LCD and FL inverter or backlight LED module.

• Satellite T110-107 restore win7 after replacing hard drive

  I am now out of UK to work, won't be back in a few years

  I had problems with my hardrive to the satellite T110-107 and unable to start my laptop
  So I went to the local repair center of Toshiba and replaced my hardrive
  The problem is now I have no operating system in my new hardrive

  I am able to restore my previous pre-installed system?
  pls pls pls someone tell me?

  Thank you so much!

  Hello

  Of course, you can install / recover the computer laptop back to factory settings.
  To do this, you will need the drive recovery Toshiba for this device.
  This disc can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

  But the Satellite T110 does not seem to be equipped with an internal optical drive.
  So, you will need to connect an external USB ODD in order to be able to recover this unit.

  You will buy this external USB CD/DVD drive or you would borrow such a device someone

• Satellite P200-1EE: charger problem after replacing the AC adapter / CC

  After changing my AC power (the old one didn't work anymore) I have problems with the battery charging circuit.
  When the adapter is plugged in and the laptop is turned off, it charges the battery OK.

  If I turn it on it will charge the battery until it is fully charged, the light will be then turns blue for a few seconds and then turns off.
  The battery will then race down until it is completely empty, even if the power adapter is showing as connected.
  Once the battery is fully discharged cell breaks down. Once off, it will start to load again.

  Someone at - it ideas to help me please.

  Hello!

  A friend of mine had a similar problem with its Satellite laptop. He bought a not Toshiba AC adapter and the battery could not be loaded.
  After that, he bought an adapter AC from Toshiba and everything works now.

  On the Toshiba site, you can search for compatible adapters:
  http://EU.computers.Toshiba-Europe.com-online services & -online Options of PC Accessories devices & -Online Homepage Options & accessories PC

  Good bye

• Satellite L500 is not start after replacing the CPU fan

  Hi guys, I just replaced my cpu fan because the former was noisy and only working at half speed, I also had a couple of farm of downs due to overheating. The day that I removed the old fan the laptop was working fine and I stopped via the Start button and disconnected power and all the other wires.

  I installed the new fan today, put everything, plugged in the power cable, power led ok, ok... hold the power button led charge, led came to start on, turning on the fan, no hard drive does not display goes out again in 20 seconds, only power led and led load display.

  Unplugged all, disasembled and checked all my connections were ok, tried, always the same problem, checked the fleas memory sharp and even cleaned for hard drive always the same problem...
  Anyone out there who can help me please...?

  Best regards, Hans

  Did you remove the CPU or have you checked if its places correctly?
  Have you added the cooling grease after removing the cooling module?
  Hmm, but it looks like a little you damaged the Council why disassemble unit.

• Satellite C660 - impossible to activate WLan after replacing a Wlan card

  because I need bluetooth that I swapped the Realtek RTL8188CE in my C660 for an Intel Centrion 1030.

  Now I have bluetooth works fine, but I can't get wifi working: (, drivers installed well but I can't spend it switch using Fn F8, and the program of intel which accompanies said pilots "hardware Radio switch is off")

  I tried swapping back to my old card wifi and then as magically wifi appears in Fn "Flash Cards", with no installed drivers for this card or anything, but when I use the card intel I have no wifi between "Flash Cards".

  Is there a way I can force the wifi turn on?

  the latest version of the bios, I found for the C660 is 1.8 and it's one that I installed.

  The whole story is a bit confusing for me.
  Has your laptop factory settings?
  Since when you noticed this problem? I can't imagine you have from the day.
  Have you installed latest WLAN driver of Toshiba page - http://aps2.toshiba-tro.de/wlan/?page=downloads?

  New laptop comes with OS preinstalled and hardware properly configured so it must works.
  I'm afraid you messed up something m.

• Average recovery creating Impossible on my Satellite L755D

  Hello

  Try to create recovery disks for my Satellite L755D-10U through toshiba bulletin board, but whenever I click on the icon to create a recovery media, I get an alert that says:

  the creation of means of recovery is impossible!

  Not found the HDD Recovery folder on the second disc of the first hard drive. There is no valid Envirenment recovery of HARD drive on this computer.

  My best friend has exactly the same laptop that I bought at the same time (sad, I know) but its made fine records. I don't do anything else, can anyone help me, does anyone know why mine does this?

  Thanks in advance

  Still is it that creation of recovery utility Toshiba doesn't have access to the recovery image stored on the HARD disk.
  Unfortunately, nobody here can tell why.

  I put t know what did you do with your laptop, but I presume that you have changed the structure of the partitions or perhaps somehow remove HARD drive recovery image.

  If your friend has absolutely the same notebook (the same part number (PSK4YE) that it can create this disc of recovery for you and you can use it on your laptop. If this isn't the case, you have a problem.

  Please send comments.

• Problems with Satellite L755D-13V after reinstallation of Windows 7

  Hi all!

  I really need a support here. Im a kind a noob about PCs ;)

  I reinstalled Windows 7 on my Satellite L755D-13V (64-bit). After that, I have some problems with some drivers.

  (1) first of all SM Bus controller driver-free and I cannt find it on internet. I tried the "Hardware Setup" from toshiba support page. Had no results.

  (2) the VGA Graphics standard is listed twice, a gives a yellow "!" He says: "could not start (Code 10)". The drivers are up to date.

  (3) the wifi does not work. All the drivers are up to date but I cannt find a netzwork.

  Is 2) and 3) due to 1)?

  Please help me!

  hortab

  System:
  Windows 7 (64-bit)
  Satellite L755D-13V

  Thank you for a short return.