Satellite L850-10j makes some distortion or ringing sound

Similar Questions

• How can I do a restore on Satellite L850-10J disc

  Hello

  IV ' e bought a Toshiba Satellite L850-10J.
  It does not come with a CD in the box...

  So I thought it was an image of the DVD for me to burn it to a blank DVD in my PC.
  I can't find, please tell me where I can find it.

  Thank you.

  Hello

  > How can I do a restore disk
  This should be mentioned in the manual of the user who is always pre-installed.

  In my case, I used the preinstalled Toshiba Recovery Environment Creator + software +.
  This Toshiba software allows you to create a disk recovery or a recovery flash memory stick.

• Satellite L850 - cannot make Bluetooth work under Win 7 64 bit

  I bought a "new" L850, with Window7 64 Bit
  I managed to have Bluetooth run only once, but now it still says "Bluetooth is not ready" when I try to make a new connection.

  I have the Bluetooth Manager icon in the taskbar and then I turn on and off Bluetooth, but the icon does not change, and I still get the above message.

  Can you give me advice what to look for?

  I can't imagine that there is a problem with bad or old drivers Bluetooth worked a few days ago, and I'm not aware of having changed anything that has to do with Bluetooth.

  Thanks in advance
  Detlev

  Hello

  AFAIK, you must activate the BT as well as the WLan using the function key F12 (or FN + F12)

  Have you tried that? BT is enabled?

  It would also be interesting to know what Sat L850-xxx you exactly.
  I think that the laptop was equipped with a WLan/BT combo card, but I t know if its a Realtek or Atheros module.

  I think in the worst case you should try reinstalling the drivers necessary to run.

• How to activate the Intel GPU of 4000 on Satellite L850-10J

  Hello

  I would like to know how to activate my graphic card intel 4000.
  On the Device Manager in the graphics card menu I can not see the 4000 graphics card intel, shows me only HD 7670 M Ati graphic card.

  I did an update of my bios version 1.60.
  What is supposed to do?

  Thank you.

  Hello

  You want to switch between the internal and dedicated GPU. Right?
  You said that you have an ATI graphics card.
  For laptops that are equipped with the graphic chipset ATI something like that is not possible because not supported

  As far as I know, you can do so with the nVidia GPU support the Optimus technology.

• Distorted picture or a split screen on Satellite L850-13 q

  Hello

  I have a Toshiba Satelitte L850-13 December 2012 q, last month I send the laptop because the problems marked with GPU, they changed my motherboard.
  Weeks worked perfectly, but now I have a few problems as before, I have sometimes, when recorder that he passed and I download on youtube, look here: http://www.youtube.com/watch?v=qiMC5QQzoSs&feature=youtu.be

  What happened, why this laptop has the production stop, look: http://www.toshiba.com.ro/discontinued-products/satellite-l850-13q/ this notebook, I think that this laptop there comes from the factory with gpu issues.

  I saw your movie and I must say GPU is crazy. Sorry, but I think you should contact the service again and ask for help. They should help you with this.

  What you can try is to connect your laptop to external monitor, switch to one external device and do the same test, just to see if the same thing happens again. I imagine that the result will be the same and that is no doubt unwanted GPU.

• Toshiba Satellite L850 - display driver problem

  Hello
  I have a Toshiba Satellite L850-1j9, (PSKG8E-02D00KCE), in collaboration with i7-3630QM and an AMD Radeon HD M 7670.

  The problem is, I'm not able to install the AMD display driver. When I try to install the software and drivers this problem appears: https://youtu.be/AOiPq8WVz_M

  The first time that I was using Win 10. I did the update to win 10 about a month ago and everything was ok until 4 days ago. I was working with my laptop with an external screen connected by HDMI and all of a sudden the screen started to Flash some green lines with a black background (something like you can see in the video).

  I saw on the internet that some people have problems making the update to wion10, I have installed new Windows 8 to see if has something related to win10 but the problem persists.

  I tried to install the intel CPU, a graphics 4000HD Intel GPU, but may not use it as a main GPU. I had this problem: "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  I need help please to understand what I can do to solve this problem. I took a peek on the internet and so far, I found a solution that could solve my problem.

  Thanks for your help.

  Hey

  any solution?

  Does anyone know if toshiba will make an update of the bios where I can change the graphics card? AMD to Intel...

• Satellite L850-1V8 - 'System' process (PID 4) uses 100% of CPU

  Hello

  I have a Toshiba Satellite L850 1V8 with windows 8.1 64 bit on it.

  I encounter the following problem: some times when I start the system, the 'System' (PID 4) NT kernel process begins to spin, taking up 100% of any one heart.

  This happens about 3-5 minutes after that the system is in place, but a few times I saw him from the hours later.
  I have to restart the system to make this problem go away.

  Someone at - there experience this problem?
  No idea where to start looking for a solution?

  These processes can be associated with any software / application running in the background system

  But I know kernel NT & system could be generated by http.sys uses port 80.

  That would mean that and would mean that a piece of software like IIS (internet Information services) could be responsible for this process in the background.

• Satellite L850-117 - support SATA III

  I have a plan to change my old hard drive with the new SATA III SSD.

  I searched Toshiba homepage on spec if it supports SATA III, but it is very difficult to find this kind of information. If I understand correctly, we must support SATA III for the full implementation of the DSS.

  The laptop is Toshiba Satellite l850-117, Sandy Bridge (32nm Technology), by Googling it I found a few answers that if I have a Sandy Bridge, I also have SATA III support.

  From the BIOS I can only change 'best performance' or 'better life' for HDD/SDD, nothing on the SATA versions.

  It's the best spec I found so far

  I have USB 3.0 support, I guess that's a good sign, but I want to make sure I get full performance out of it, if spending a lot of money on large SSD.

  Can someone give me an advice?

  + The message was edited: broken link has been removed.

  Hello

  Why you n t install some diagnostic tools material like Everest Home Edition or another tool like SENECA Sisoft.
  The two would be able to provide all the details and all information about the properties of material and pieces of equipment.

  The L850 series is equipped with different material parts, but usually the ODD controller and the HARD drive is connected to the chipset (Port of Cougar / Panther point) and the chipset is connected to the processor (Sandy Bridge / Ivy Bridge)

  However, in my view and from my own experience, the SATA ODD interface would support 150Mbyte/s max. I don't know about the HARD m drive but I guess it could be 300Mbyte/s (SATA II)

  But please share the results provided by one of the tools mentioned.

• Satellite L850-147 - Audio problem with output jack and balance

  Hi all

  When I plug in my headset on my laptop (Satellite L850-147) and try to listen to music, I hear music (instrumental parts)... by far, I can hear the voice of the singer.

  I found a turnaround with the adjustment of balance in realtek HD audio manager 100% or 100% left...
  But this isn't the way that music have to play...

  I have reinstalled the Realtek HD Audio Manager but without success...
  Any idea?

  Thank you

  Hello

  And have you checked the settings in the software you use to play the sounds?
  Of course the Realtek HD audio Manager supports the sound configurations and you can change different sound effects such as environment and Equalizer but the same or similar options are supported by each software reading and I also recommend to check this!

  By the way: Toshiba laptops are pre-installed with a HD Audio SRS Premium application. To access this, go to:
  Start-> all programs-> SRS Lams-> SRS Premium Sound Technology
  Here, you will also get some options that could be interesting for you.

  Also recommend checking Audio improve
  Make a right click on the icon of speakers in the taskbar then on playback-> speakers devices->, click Properties
  On the development tab, select the sound effect you want and click on apply.

• Satellite L850 - display problems external 1080 p

  I did turn my laptop Satellite L850 via HDMI to an external monitor without problem for many months.

  A couple of weeks, I tried to update the catalyst driver and have had problems since.
  Basically now when I select mode 1080 p via the Catalyst Control Panel, it makes the screen flash and present vertical lines.

  Occasionally, it will work for a short time, even up to a full day and it will randomly start once again. I can play a game in 1080 p mode and it will be totally random, sometimes which allows me to play for hours without having the screen flashes black while the other times, it starts flashing constantly and the only way to fix it is to reboot or pull the HDMI cable and plug back and cross your fingers you have enough time to reopen the catalyst and change in 720 p which is always stable.

  I tried:

  1 using the AMD catalyst removal tool and resettlement through the catalyst of origin Toshiba drivers factory default
  2. use to restore the system to go back before I made the changes
  3 using the removal tool from AMD Catalyst and update to the latest version via the site Web of AMD.
  4 reinstall my chipset with #1 drivers
  5 tried another monitor (still happens)

  On a side note, whenever I use the removal tool it removes my USB drivers too and I have to reinstall.

  The current graphics driver is AMD Radeon HD 7670 M and I also tried the solution on here http://www.mytoshiba.com.au/support/item/781 tech support forum.

  I ran out of options other than a full format and reinstall I want to avoid if possible. Any suggestions would be greatly appreciated.

  Thanks in advance

  Hello

  The AMD Catalyst (control software) update would not solve the issue.
  You need to update the graphics driver too!
  The graphics card driver can be uninstalled in Device Manager!

  I found also this Toshiba document to similar topic which appeared after the phone woke from sleep mode.
  [After sleep mode, a distorted image or a split screen may be displayed: http://aps2.toshiba-tro.de/kb0/TSB3903IB0000R01.htm]

  This problem was caused by the display AMD. V9.12.0.0 driver, which was automatically installed through the Windows Update feature.

  Download and install the driver of Toshiba page of European driver that should solve the issue of the line

• Satellite L850-1FF - screen brightness hurt returning to record

  I am the owner of a Satellite L850-1FF (lots of gfx mem)

  Toshiba has enabled keyboard software tool that allows me to set the brightness to help
  FN + F2 + F3 to display darker or lighter.
  It works very well.

  BUT.

  If I close the lid (so the computer goes into power saving) and reopen the lid, the curriculum vitae of windows - the brightness is at max, or near max. The Fn + F2/F3 does not work. He just openes the view menu of the keys which is no setting - BUT does not work.

  Obviously, guessing a bug in Toshiba graphics card, or the keyboard driver adjust brightness tool.

  I wish I could restart the tool to see if that helps, but don't have any idea what program exe file it is.

  Toshiba - when will fix you this bug?

  I am very angry.
  I have to close all programs and restart windows now to make it work again.

  Greetings,
  Johan

  I assume that by virtue of being able to save, you mean standby, right?

  After waking from stand-by, can you change brightness level using parameters in some diet plan?

  It is not easy to say what can be the problem, but if you can change it in Windows power plan but not the keys of F I guess the problem is Toshiba specific tool.

  Otherwise, when you set the brightness level in Windows power management, it should not be changed after waking from sleep. That's what confused me.

  Can you please change the power management, set the brightness level and test standby? The same thing happens again?

• Satellite L650D-10J - Windows 7 does not start

  Hello

  I have a Toshiba Satellite L650D-10J, Windows 7 64 bit, 4 GB RAM and it do not start Windows 7. He begins to see you logo startup Toshiba etc and then it goes to black and it loads Bootmanager of Windows with the following message;

  + A problem on your computer has occurred during communication with a device that is connected. +

  + This error can be caused by an external storage device as a drive external USB, the device in use, or damaged hardware such as a hard drive or CD-ROM drive disconnect that is damaged. Make sure that all removable storage is properly connected, and then restart your computer. +

  + Contact the hardware manufacturer, if you still see this error. +

  + Status: 0xc00000e9 +.
  + Info: an unexpected I / O error has occurred. +
  (it has been translated by the Dutch there are some sentences that are incorrect.)

  I tried to download a Windows 7 recovery disk, it burned on DVD. It works, I'll get to choose where he was working to correct (I get an error) or use a Windows 7 from disc (does not work). And if I start it in safe mode I see that it stops and freezes to the file; Disk.sys

  Someone at - it an idea?

  Greetings,

  Hello

  And have you connected an external USB device as says the error message? If Yes, remove all USB devices and try to restart your laptop.

  If you can t start in safe mode, your operating system is confusing upward and the only option to get rid of it is to reinstall Windows.

  You use the preinstalled version of Windows 7 in Toshiba? If yes go to the start menu Windows by pressing the F8 button where you can select the safe mode, etc. and choose Advanced repair my computer option. Then select Toshiba HDD recovery and factory settings are restored. Also see this article on HARD drive recovery:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If disk HARD recovery doesn't work, you need an original Toshiba recovery disc. If you didn t create this drive just order a new one here:
  https://backupmedia.Toshiba.EU/landing.aspx
  ?

• Satellite L850 - 1 k 3 - Wi - Fi is too slow

  Hello!

  I have Toshiba Satellite L850 - 1 k 3, I bought without OS and I installed win 7 x 64, now the problem is that my Internet connection is too slow. I'm not a pilot who exactly to download, it has some options which allow you to use a faster speed. Now I download with 2.5 mb max, max speed, I used on my old pc was 5.0 mb.
  So please help what driver to download and how to use a faster speed.

  Thank you!

  Your model of laptop has Atheros WLAN card so please download Atheros driver for Win7 64 bit.
  The correct driver, you can download from the Toshiba WLAN Portal - https://aps2.toshiba-tro.de/wlan/

  First check and make sure you have installed the right driver.

• Satellite L850-1HP not configure downloaded Windows Update files

  My laptop was having problems on the first day that first the CD-ROM not open, then the webcam and the microphone switch off forever and can not be turned on again never and finally, this summer, my computer laptop would not connect to any WIFI network at all, it will still fail.

  I went to the place where I bought it for support, they sent for repairs, a week later, I'll be back, it is restored back to factory settings, all seemed well, CD ROM functional... Webcam and microphone too.

  So I thought I would check around and start things tyding for my taste, and then I realize that I need to download updates from Windows Update, so I do it, on 100 + updates, I start to download, but they do not download until the 20th minute that it is stuck at 0% What seemed fishy to me, because then he just jumped up to 10% and progressed forward.

  After downloading the updates, or so he said she had, I restart the laptop in to get their working and configured properly.

  There can be no. After I clicked on restart, it began to close, saying it is to configure and to 20-30%, it restarts, and then he charged to the top of the screen, even saying that he configures updates, then he said that he failed and said it restore the data back to normal, that he never scare made.

  After about two hours of waiting so he could do nothing at all, I restart the PC, the same thing.

  Restart again but this time I restore things settings once more, takes me about 1 hour with a full erase of the data (of course the rest of the OS and toshiba apps too) all implemented naming stuff, and accept the terms and conditions, blah blah, operating system starts, I check everything and restart.

  After the reboot, I decide not to configure anything until I downloaded all the windows updates, so I do just that, BUT I get the same error again, sneaky - slow download of updates, restart and get the same message that it cannot configure updates and wait forever-long for the laptop to "restore" data back to normal which she didn't do, once again.

  I'm completely helpless as to what I should do, I restored factory once more but this time I'll just wait for some feedback or try to make everything I find on these forums it is useful.

  Help, please.

  Hello

  Satellite L850-1HP was pre-installed with Win 8 64 bit.
  You have problems to install the updates to Win 8?

  Generally, you will get an error message if an update has failed.
  Could you post the error message?

• Satellite L850 - screen is black

  Model: Satellite L850 - 1UX
  Part number: PSKG8E - 08100KCE

  Hi all

  I have the above model. It happened to me the screen became black suddenly, but there is always something 'in the back. I can see the back of the screen (that is, the office or the initial password screen) but totally black, unless I look at it from an angle or with a lighter.

  This problem happened to me 4 or 5 times in the past<2 years="" and="" i="" am="" somewhat="" desperate="" because="" i="" cannot="" find="" any="" solution.="" the="" first="" time="" i="" took="" it="" to="" the="" service="" repair="" they="" told="" me="" that="" there="" was="" something="" with="" the="" automatic="" upgrades="" from="" the="" computer="" and="" i="" needed="" to="" cancel="" that="">

  But the prpoblem persists, I tried to connect it to an external display, and it still works.

  I don't know what to do to solve this time. Any advice?

  Concerning

  .... I tried to connect it to an external display, and it always works.

  If the external monitor works properly, the GPU as well as the graphics card drivers should be OK and I think that the problem must be related to a display board malfunctioning internal.

  In case the pilots or GPU would make some problems, the external monitor wouldn't work too.