Satellite L850 - lose taken VGA

Similar Questions

• Satellite L850 - exchange of RAM and valid warranty

  As the title I want to know I will lose my warranty if I change ram by myself?

  I have Satellite L850-1V8 (I can't find it on the site official Toshiba but anyway no is PSKDNE) and if you can tell me who can RAM I put?

  Hello

  I found some info base for your laptop model. According to specification for laptop, that your machine can be upgraded up to 16 GB and you can use memory modules live 4 X 8 GB max.
  Rams compatible are:
  2 GB DDR3-1333-PA3918U-1M2G
  4 GB DDR3-1333-PA3918U-1M4G
  Unfortunately, I wasn't able to find compatible 8 GB of RAM, even on the support page of Kingston. But I think that the info you can get from the Toshiba service provider in your country.

  Return to the upgrade of RAM. I guess that your laptop has 4 locations of memory. Two of them are placed at the bottom of your machine under guise of memory. You can upgrade memory on these two locations without losing the warranty. How this is also described in paper manuals s user on page 70.
  For example, you can put 4 GB modules there are two.

  Other two RAM slots are probably under the keyboard and RAM should be exchanged or maintained by authorized personnel only.

• Satellite L850 - is possible to connect two monitors external simultaneosly

  Hi, I have a L850-150 and I would like to know if it is possible to connect two monitors external simultaneosly, one by Hdmi and the second by Vga to enjoy an installation of three active screens (including the laptop screen). Im trying to figure out how to do without using a USB to adapter vfga or a Matrox dualhead2go.

  I want to use the outputs existing.
  Thanks in advance

  Some laptops supports a dual output: for example the Qosmio X 500 as shown here:
  http://APS2.toshiba-tro.de/KB0/TSB13033Y0000R01.htm

  But for Satellite L850 this isn t possible.
  But you can use an external device, such as Dynadock
  http://www.Toshiba.com/us/ACC-dynadock

• Satellite L850/046 HDMI not working not

  I have the laptop above 8 win with a plug vga on a monitor.
  Recently, I bought an HDMI cable to a spare with dvi - d 18 pin port monitor.
  He worked for a week then suddenly just now connected HDMI monitor cleared port.

  I tried to use the display function to turn it back to the but no luck.
  Only the VGA connected monitor works and the laptop monitor is also disabled.

  They only way I can get the laptop monitor to work is to disconnect the HDMI port.
  Some how connect this port is now interfering with the monitor to the laptop to function.
  I tried to restart the laptop but having the same problem.

  I saw on another forum where the moderator suggested using this link to reinstall the driver, Toshiba
  http://support.Toshiba.com/drivers

  I tried to use the serial number and model number, but it does not either.

  Someone has an idea?

  Kind regards

  James

  Your PSKG8A-046001was Toshiba Satellite L850/046 released in Australia and you must use the Toshiba Australia support page to get the drivers.
  http://www.MyToshiba.com.au/support/download

  But I put t know which driver you want to reinstall or update?
  There is no particular HDMI driver. The HDMI port is recognized automatically by the system.

  But of course, it might be possible that your graphics card drivers are muddled up: Intel and AMD
  So uninstall the ATI GPU driver first.

  The laptop uses the Intel Core i5 3210M CPU processor and this graphic unit supports internal Intel HD 4000 CPU.
  I recommend you update the Intel HD Graphics 4000 driver and the ATI/AMD driver.

  By the way: the latest version of the Intel HD Graphics driver 4000 can be downloaded from Intel page too.

• Satellite L850-1V5 AMD RADEON HD M 7670 - no display on external monitor

  Hello.

  I'm having a strange problem with my Satellite L850-1V5 new with card in order to 7670M AMD RADEON HD.
  (It runs windows 8 64-bit family)

  At the beginning I couldn't open the CCC.
  So I uninstalled the program and reinstalled the drivers I found here, on the Web at Toshiba Europe site.
  Now it works well.
  But now I have another problem.

  First, I tried to extend/duplicate(whatever, it does not really matter) my workstation via the VGA port.
  In CTC, I could see that he acknowledged my external monitor model and even the mouse cursor has acted as the Office has been extended.

  BUT
  1. it has no image on the external monitor
  2. on the input of the external display Menu(:where one chooses the port to be used, i.e. VGA, HDMI, SCART, DVI etc etc) VGA port c o u l d NOT be selected, as if there were no cable on the external monitor

  Then I tried an HDMI cable with the same result, with the difference that on the external screen menu entry the HDMI port c o u l d be selected, as if it were a cable on the external monitor, but the monitor says "no signal".

  I tried the same steps via Windows Control Panel (menu Display).

  Same results...

  I tried on 2 different external monitors (the two LG ones, even if we're about 3 years older than the other, so I guess he should have nothing to do with the monitor).

  Any ideas?
  Is this a hardware problem, a software problem? Toshiba Service go?

  Post edited by: L850

  Hello

  To my knowledge, use the keyboard shortcut to switch to an external monitor.
  AFAIK the F4 (or Fn + F4) changes the output display.

  Have you tried using this button?

• Satellite L850-1v0 - alert "Cable not connected" when external monitor OFF

  Hi all

  I have a portable Satellite L850-1v0.
  My monitor is an A.c.e.r X233H
  Windows 8

  I have the setting 'Disable the display' 5 minutes.

  However, when the laptop off the screen I get a small box that bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  If I connect the monitor to my other machine it turns off fine and do not show this message.

  How can I get the laptop to turn off the display correctly?

  Thanks in advance
  Richard

  > when the laptop off the screen I have a small box which bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  The message appears because the signal to the external display was interrupted because of the setting: turn the display off.

  > If connect the monitor to my other machine it turns off fine and does not show this message.
  I think that the other computer/laptop supports another graphics card and so this message does not appear.

  Satellite L850-1v0 support and use of the 4000 Intel HD Graphics intern, who is part of the processor Intel® Core i3 - 3120M and this graphics card shows these alerts

• Re: Need to Win7 64-bit driver for Satellite L850-B4S

  Please indicate the reference driver for windows 7 (64)
  Sattelite L850-B4S
  Wi - Fi and VGA connection
  It is very necessary

  All countries where Toshiba offers laptops has support own page on the language of its own.
  Have you checked http://ru.computers.toshiba-europe.com/innovation/product/Satellite-L850-B4S/1126109/

  I can't read Russian, but there you should be able to find the link where you can find the drivers.

  Check it out please.

• Support for Satellite L850

  Hello
  Model Satellite L850-Y3110(PSKFWG-00F00C)
  my laptop specs are i73630QM with 8 GB DDR3 Ramand Raedon HD7670M graphic 2 GB in 64-bit Windows 10 pro. When I bought it was installed with Win8.1 later I manuallyt updated to Win10.Everything was beautiful graphic is also correct.

  Toshiba Web site, I found that my laptop is not up-dimmable to Windows 10. In any case I've updated and it has not come back.
  So my drivers are now automatically updated with windows.

  But to find the drivers from the Web site of my OEM I checked the Web sites of all the toshiba. But most of them does not recognize my model except this website.
  In this site as I'm not getting all the drivers of Windows8.1.Only drivers for Windows 7 is available.
  
  (1) I would like to know where I can get these drivers. (Win 8.1)?

  Please check with my model number before answering because I spent several days for this. Once again tOshiba-India Web site provides only drivers update of the bios for my version.
  (2) so I would know if the drivers of the other model L850 are compatible with my knees?

  Now, I will come to the real problem.
  IntelWeb site I am aware that my laptop's integrated graphics intel HD4000.
  (3) so, where is it?
  But nowhere in my laptop I see this display adapter. I looked in the bios also to see if it is disabled in the bios.
  And I found that there is no tab in the bios about the display/graphics.

  I tried all the latest drivers from intel for HD4000 and AMD for Redon7670M pilots.
  Installing the driver from intel whenever the installer fails. Add device method results in adapter intel HD does not not in the Panel.

  (4) how can I enable (if present) integrated graphics intel HD4000?

  Why I wanted this?
  WiDi/Miracast is supported with IntelHD4000 (projecting to another screen)
  Mutiple views are possible.
  Fast Sync can be enabled. Which allows a fast encoding of videos
  Switchable graphics can be activated.

  Some advised me to try the modded bios.
  but it may result in bricking of your device. These website I found that someone has enabled graphics options built into the bios with bios modded for my model. As this file is no longer available for download, I'm here.

  I call the attention of the guru just solve my problem

  Hi there, I know it's been long and you might already changed your laptop, but have you found a solution for this?

• Satellite L850 - Error 0xC0000005 Win8 installing Code

  Hello, I have a Satellite L850-1v3 phone and I accidentally destroyed my hard drive

  Now, I am trying to install Windows 8 in a new hard drive but it is still stuck on 89% and this error code come '0xC0000005 '.

  I tried with different installation discs through CDROM, usb etc.

  What should I do?

  Another question that comes up is "where can I find my key series of Windows 8?

  Thanks :)

  You try to install Win8 64-bit original version you got with your machine?
  Have you bought any new HARD drive?

• Satellite L850-1PD - utility function key will not

  Hi all,
  I have this device: Satellite L850-1PD with Windows 10
  Before, with the function FN + F2 or FN + F3 key Windows 8.1 it was ok, now with Windows 10 I have problems.
  I cannot increment or decrement brightness
  Help me!!!

  Good evening

  I also have a Satellite L850-1PD upgraded to Windows 10, it would seem that even if Microsoft has provided an update to win 10, Toshiba doesn't include not among mobile phones compatible with Windows 10 and does not release from updates. For me it does not work the buffer until it has fully started winning 10, and I do not use the touchpad.
  concerning

  Nickeyon

• Toshiba Satellite L850 - display driver problem

  Hello
  I have a Toshiba Satellite L850-1j9, (PSKG8E-02D00KCE), in collaboration with i7-3630QM and an AMD Radeon HD M 7670.

  The problem is, I'm not able to install the AMD display driver. When I try to install the software and drivers this problem appears: https://youtu.be/AOiPq8WVz_M

  The first time that I was using Win 10. I did the update to win 10 about a month ago and everything was ok until 4 days ago. I was working with my laptop with an external screen connected by HDMI and all of a sudden the screen started to Flash some green lines with a black background (something like you can see in the video).

  I saw on the internet that some people have problems making the update to wion10, I have installed new Windows 8 to see if has something related to win10 but the problem persists.

  I tried to install the intel CPU, a graphics 4000HD Intel GPU, but may not use it as a main GPU. I had this problem: "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  I need help please to understand what I can do to solve this problem. I took a peek on the internet and so far, I found a solution that could solve my problem.

  Thanks for your help.

  Hey

  any solution?

  Does anyone know if toshiba will make an update of the bios where I can change the graphics card? AMD to Intel...

• Satellite L850 - 1 KG-cooling fan runs constantly

  Hello

  I have the problem that runs constantly in my Nooteboom fan. How can I open the case and clean it?
  I have a Satellite L850 - 1 KG

  Thank you

  I don't know how old is your laptop and if dust may be reason for constantly running cooling fan but try it please check first advanced power options. You will find the option for cooling method. Please, set it to optimized battery. This should reduce the activity of fan cooling.

  I also hope you use laptop on the desk and fan/cooling grill is free.

  By the way: do you use original with the original display driver Toshiba recovery image?

• Satellite L850-E8S - shutdown problems

  Hello everyone

  I bought Toshiba Satellite L850-E8S with Windows 8.0 (for a single language) preinstalled in October 2013. At the moment I can't get stop normally.

  Question: * pressing Shutdown (stop) of charms goes up "Windows is shutting down" and after that the screen turns off but power light is lit and the fan keeps operate.* I stop it by pressing the power button, I really want to quit smoking. (Once I didn't notice that and put the laptop in a bag for a few hours and it of a miracle that no equipment would have been burnt, despite the laptop was hot like the Sun) * the problem started after a month of use, and I didn't think her yet.*

  First of all, I thought that the case concerns him * hybrid Shutdown in the Win8. I have visited many forums dedicated for hybrid stop, proven fruitless discussions. *! AND! I had the same problem on my laptop with a slight difference - loading Win7 and Linux * the monitor stays on (with the lights and the fan on either). *
  Moreover, I also saw a BSOD after a day I bought the laptop. This problem concerned Realtek Audio driver and SRS Premium sound. As I understood the question is drivers conflict. Right now I have no installed Audio SRS premium and see no BSOD, but Realtek audio driver is not stable: the sound either begins to work in a few minutes after starting windows or it does'nt work at all.

  First of all, I wish really that someone to help me with the shutdown problem. All tips are welcome.

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm, change the settings described and try to turn off your computer is turned on on a regular basis.

  It works for you?

• Satellite L850-1V8 - 'System' process (PID 4) uses 100% of CPU

  Hello

  I have a Toshiba Satellite L850 1V8 with windows 8.1 64 bit on it.

  I encounter the following problem: some times when I start the system, the 'System' (PID 4) NT kernel process begins to spin, taking up 100% of any one heart.

  This happens about 3-5 minutes after that the system is in place, but a few times I saw him from the hours later.
  I have to restart the system to make this problem go away.

  Someone at - there experience this problem?
  No idea where to start looking for a solution?

  These processes can be associated with any software / application running in the background system

  But I know kernel NT & system could be generated by http.sys uses port 80.

  That would mean that and would mean that a piece of software like IIS (internet Information services) could be responsible for this process in the background.

• Satellite L850 - 1 P 9 - Windows 8 critical Error athwx *.

  Hello

  recently, I bought a new laptop, a Satellite L850-1, P 9.

  The first week of using the laptop never showed signs of Ant problems, but in the last 3 days I get a BSOD that stops at the laptop.

  Before closing, I have thus written in a document of something like this "athwx_8". I read that this kind of error is related to the software that can be installed.

  The software that I use now is the same that I used on my old laptop, it may be that something related to driver software.

  Here is a link from which grab the windows event viewer: [errors found | http://sdrv.ms/1a0q3e6]

  Hello

  I recommend you to reset the laptop back to factory settings.
  Let's hope it's just a software problem that could be solved by the system recovery.

  Don't know how to do this?
  If this is not the case, check this useful document from Toshiba:

  [Windows 8 recovery & repair | http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm]

  You should choose the option * reset your PC *.
  This would remove and reinstall Windows option permanently removes your personal files and the PC applications and returns 8 Windows to its original state. That the State of origin is a pure installation of Windows 8, or the default configuration of OEM factory, depending on the medium used for the operation.

  Any comments would be greatly appreciated