Satellite M30-107: I/o error and impossible to copy data

I'm trying to back up my data to DVD blank and I "Draq n drop" software to do as well as other kinds. Insert the blank dvd - R and dvd + R disc, and nothing happens. It does not seem to recognize.

When I try to open it from the dvd icon this message sometimes "demand impossible because of an i/o device error. I a super multi drive which should read all kind of cd and DVD but something is wrong." I went to my computer and double click on the icon and under the recording tab, I clicked on "Enable recording on this cd player" I dragged then records in the dvd and it seems to have worked, when I inserted the dvd then it doesn't let me open it...

Could someone help me with this please? I'm not too good with computers and I had it for two years and this is the first time that I am trying to back up my files and I can't do it.

Thank you very much for your time.
JC

Hello

Drag & drop is not bad bud, I advise to use the software "Nero burning rom" to burn the DVD.
This software supports many burning options and allows you to burn the middle with best performance.

Additional you need to know that the player doesn't support not all CD or DVD of all brands.
In the user manual, you will find a list of compatible CD DVD manufacturers and supported.

But please don't be confused about the unfamiliar names like IE Mitsubishi.
Manufacturers and not sellers as TDK. Do not mix manufacturer and seller!

Best regards

Tags: Toshiba

Similar Questions

  • Satellite M30-107 - guard wireless disconnect and never connects

    My Toshiba Satellite M30-107 with Intel (r) PRO/Wireless 2200BG Network connection is not connect wirelessly. I know that there is no hardware problem, because I used this laptop to different wireless networks in the past, and just recently I formatted my laptop using the recovery disk Toshiba gave with it.

    I set up the wireless entering the SSID and network key. But the wireless connects with the Excellent signal is only for a second and then disconnects, then reconnects, disconnects. After doing this for a while, it remains offline.

    How can I do to connect and stay connected as it should?

    It is not easy to say why all this happens. I also think that your laptop works well, then maybe you should check the router. Reboot the router and check the WLAN connection again.

    For a moment turn off WLAN protection and check if the same problem happens without entering the network key.
    Setting router to run on 802. 11 b / g only and check again.

    Play with these settings. Have you bought a new router? I mean if everything was OK in the past I m wondering why you are facing this problem now.

  • Satellite M30-107 does not start successfully after using recovery disk

    Hello

    I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
    I used the toshiba recovery disk, but after that the laptop is no longer support windows.

    When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
    When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

    Any help or advice would be much appreciated.

    Thank you
    JT

    Hello

    Sounds a little like the laptop does not start because of the problem of Windows software
    You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

    I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

    You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

    In this case we (you and me ;)) might know if this problem could be related to hardware or software.

    Good bye

  • Satellite M30-107: WPA and WEP security software

    I want to connect my Satellite M30-107 P - M 745 to a network of wifi MIMO inverters to date.
    I bought a router and a PCMCIA adapter.
    I wish security WPA and WEP setup - I need any special software Toshiba on the PC itself to do so, or simply use the software that came with the router and adapter card?
    Thank you

    Hello

    There is no software Toshiba for the WLAN settings. Toshiba has created the only monitoring software called ConfigFree. By using this software, you can watch the WLAN and LAN connections. This software can also help you identify a connectivity problem if occurs.

    Back to your question: for WLAN settings, you can use the standard Windows WLAN settings or use WLAN data by software adapter settings. Please, make sure the wireless network adapter supports WEP and WPA encryption and also make sure you use the right settings on the router.

  • Satellite M30-107: the DVD Supermulti drive burn DVDs?

    I have a Satellite M30-107 P - M 745 / XP HE / 512 MB / 80 GB / 15.4WTFT / DVD SuperMulti / WiFi.

    His CD/DVD player is described as: DVD Supermulti drive compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD-RAM
    Maximum speed: reading: CD-ROM 24 x, 24 x CD - R, 12 x CD - RW, 8 x DVD-ROM, 4 x DVD-R, 4 x DVD - RW, 4 x DVD + R, 4 x DVD + RW, 2 x DVD-RAM / writing: 16 x CD - R, 4 x CD - RW, 8 x HS CD - RW, 4 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM

    Can I use this disc in WRITING ("burn") the DVD and if I can, I need any special software and what type of disc can I use.

    I would use it to back up the laptop.

    Thank you.

    Hello

    Why you ask? You have published the specifications of player and according to these specifications of hardware of the player are able to write on 16 x CD - R, 4 x CD - RW, 8 x CD - RW HS 4 x DVD-R, 2 x DVD-RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM.

    For me it s case. You can write data and files on the DVD s
    I use "Nero burning ROM" software to burn it to CD or DVD. In my opinion it's the best program and very easy to use.

  • Function FN keys don't work no-Satellite M30-107

    Hi all

    I have an old M30 - 107 that I recently reinstalled and updated the operating system.
    The function keys control the screen brightness, volume etc. do seem to work.
    I think that I've updated all the drivers for the laptop.

    Is there a specific driver (ie the chipset driver package) I should be looking that control these function keys or should they train with intervention of Ant in a pack driver bios etc. related?

    Satellite M30-107 XP edition SP3

    Thanks in advance... C.

    Satellite M30-107 is a part of the PSM30E series. Is this good?
    You can see this number when you look at the bottom of the unit. There should be a label with the model number.

    Go to the page of European driver of Toshiba and searching for archiving.

    Choose + Archive-> Satellite-> Satellite M Series-> Satellite M30-> Win XP +.

    You must download the * common Module *.

    This common module must be installed first!
    Then, you need to install additional software like Touch Pad on / off utility Hotkey utilities for display devices.

    These programs will allow the Fn keys

  • I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file.

    I want to save my outlook.pst file but get the following error message:-impossible to copy outlook: the process cannot access the file because another process has locked a portion of the file. How can I unlock it please?

    You have Outlook open when you save? You need to close.

    Hope this helps

    Post back if necessary

    ___________________________________________________________

    If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • I am trying to burn some of my downloads to computer on a disc and some songs come error and do not copy

    I am trying to burn some of my downloads to computer on a disc and some songs come error and do not copy

    Hello

    1. What is the format of the file you want to burn?

    2. what application you use to burn the disc?

    Method 1:

    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Burn a CD or DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

    Method 2:

    Disc burning: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions

  • Satellite L775D-107 is not starting and black screen

    Hey
    I have a problem with my Toshiba Satellite L775D-107 and I hope you can help me.
    Since yesterday, my laptop displays a black screen. When I push the Start button, nothing happens, but you can hear it is aired but nothing more. a few hours before that I was working on it to Uni and everything was fine.

    I had the same problem a couple of weeks, and I read on the internet that he could help out the battery for 3 minutes and then press F2 and the Start button. Nothing happened, but after 2 hours I tried to start again and all of a sudden it started correctly and worked flawlessly.
    .
    Now I'm having the same problem again and I tried the same procedure but still nothing happens. Always the black screen and just the sound of the air coming out...

    I've got very important documents in United on this laptop, so I hope you can help me.

    Thank you in advance.

    Hey

    My L50 did the same thing. Sometimes, when an another Toshiba is nearby.

    Sombody bnows so this can't be helped?

    Mike

  • Satellite M30-107 - will not power

    Can someone please help?

    I currently have a problem with my M30-107, model PSM30E-7101V-7U, it lights or boot. All I get is the 'sector' and 'Power' light on the façade and the 'power' of light the multimedia button on top, no beeps or noise from the fan.

    One thing I noticed is if I disconnect the HARD drive and turn on the LED of the drive HARD rest turn on, and if I disconnect the DVD player light so that it lights up a second then turns off. Perhaps it is a feature of the model and part of pre-boot BIOS checks - do not know.

    At first I thought it was a fault with the motherboard, so I bought an exact replacement, including the USB ports, AV output, network & modem ports and socket connector DC with PCB power distribution, and even the speakers have been replaced! But it made no difference. Still only get the 'power' & 'Power' LED on.

    Then I tried to replace the CPU, but still the same. I also tried different RAM in different locations, new modem, removed card network wireless and fitted with a panel of media replacement keys - No difference. Disconnect the LCD screen, DVD player and HARD drive does not seem to make any difference either.

    Tonight, I tried capture the wires on the fan and splicing in a new fan using the existing record (I only had a spare with the right connector fan), but that made no difference. I also replaced the battery CMOS with a constant 3v DC supply - but still no luck. He's really starting to annoy me now :-(

    I just finished checking the tension of the PCB power distribution, and it seems to provide the motherboard with a constant voltage. I have ran out of ideas now.

    Everything has been replaced with the exception of the keyboard & touchpad and the CD key and indicator LED Panel on the front of the laptop.

    Anyone has any ideas what to try next? Any advice would be appreciated, I'm starting to pull my hair!

    Could someone also tell me the function of the small black chip that is mounted just below the LDC screen inside the lid of the laptop - part number 040-0004-946 Foxconn. I have not replaced either, but if I knew what it was I could be able to test it.

    Hello!

    Which is really strange, buddy! :(
    Have you tried another AC/DC adapter on this laptop? This is maybe causing this problem and so the laptop can start t properly check it!

    To be honest, I think the best way is you go to an authorized service provider. You need professional help, and the technician can check your laptop to determine the cause of this problem.
    This problem can't be solved in a few minutes, but it should not be a problem for a technician to the laptop.

    Good bye

  • Satellite M30: Are compatible SD-R6472 and R6572-SD readers?

    Hello

    the SD-R6472 and READERS of DVD - RW R6572-SD are compatible with the Toshiba Satellite M30?

    THX

    Hello

    I put t found additional information on the compatibility of the discs with the Satellite M30.
    But if you want, you can visit the Toshiba site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ONLINE_SHOP

    There you will find options and accessories for several units of Toshiba.
    Check it out.

    PS: You can also try to request the service of Toshiba in your country for details.

  • Re: Satellite M30-107 - new compatible CD/DVD player

    Hello
    I need to find the DVD player that is suitable for my M30-107 sSatellite, can someone help me please?
    What is Teac dv-w22e?
    The original was Mat * a dvd - ram uj820s, but do not know where it would be possible to get it from...

    Thank you very much for your help!

    Hello

    (Page 4 to page 7) user manual contains information on the supported players!
    Looks like you didn't she check properly.
    This readers seems to be compatible:
    * UJDA750 *.
    * SD-R6012 *.
    * UJ-811 *.
    * DV-W22E *.

    You can find this number in google to get a...
    Otherwise, you may contact the ASP in your country for this player compatible

  • Start on Satellite M30-107 error message

    I get the following message when you try to start:

    Windows didn't start because the following file is missing or damaged
    \windows\system32\config\system
    You can try to repair this file by starting windows setup using the original CD-ROM. Select 'r' setup in the first screen to start repair.

    What is causing this error message I did nothing that should have caused an error? I can't repair using the Setup disk under windows XP was preinstalled when you buy. Any ideas please?

    Hi Linda,.

    This message is quite common and can indicate that there is a problem with your hard drive. It is always possible that the file quotes was too written or damaged by another application on your laptop but from my experience, it's pretty rare.

    The Windows repair console is available if you have a copy of the original Windows XP installation CD, but if you have only the recovery CD provided with your laptop then this option will not be available from the recovery CD contains only a restorable copy of your operating system that you can use to restore your system. This, however, will delete all your personal data from the laptop.

    If you have access to a standalone utility such as Norton Disk Doctor so I would recommend that run you a scan of your hard drive to determine what state it is in.

    Kind regards

  • Satellite M30 guard crashing after reinstalling and SP2

    Hello
    Can someone help me please. I have problems with my M30 Sat. It is 2 years old and I've never had problems with it before. However, I recently had an accident and decided to reinstall from the recovery CD. after reinstallation, I tried to download the service pack 2 and my computer crashes. I have not installed any other software and still keep having this problem. It's very strange because sp2 worked perfectly on my laptop until the recent accidents. Any help would be greatly appreciated, I reinstalled now for the third time and I am extremely frustrated.

    the error on the crash, I received was: * stop: 0X000000f4 (0 x 00000003, 0 X 86152950, 0X86152Ac4, 0X805f9f88)

    Thank you very much

    Hello

    That s too bad that happens. Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver? The pilot Sat M30 area, you will find the document describing which application must be updated to use the SP2.
    I recommend you first check this sheet before starting any installation of SP2.

  • error and impossible to re - install or uninstall

    Hi sound suddenly Muse CC 2014.2 no more opens. Error 1. and he said to uninstall. but on the creative cloud not unistaller is gray and it says unavailable uninstaller.

    I'm stuck.

    I can not uninstall and cannot reinstall (because when I download again, it connects to my CC and sees that I have already, even if I deleted all files)

    Any suggestions?

    I do not want to reformat my computer...

    Please give me a link to the just unistaller file, it might work just with that.

    Thank you

    EA

    Hi, Germain,.

    I fixed it... so I can't have a screenshot, but that's what I did.

    I uninstalled creative cloud several times and installed after you have manually removed all files related to Muse. but it did not work. Always see Muse as installed 2014.2 on CC.

    Finally, he worked when uninstalled CC I installed the first version of the CC of muse and agreed to upgrade to the latest in software (do not use CC) - of course he asked me to install CC. I did, but the update worked through the previous update of the Muse software...

    I'm just glad it works now.

    See you soon,.

    Thank you.

Maybe you are looking for