Satellite M30-107 - will not power

Similar Questions

• Satellite M30-107 does not start successfully after using recovery disk

  Hello

  I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
  I used the toshiba recovery disk, but after that the laptop is no longer support windows.

  When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
  When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

  Any help or advice would be much appreciated.

  Thank you
  JT

  Hello

  Sounds a little like the laptop does not start because of the problem of Windows software
  You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

  I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

  You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

  In this case we (you and me ;)) might know if this problem could be related to hardware or software.

  Good bye

• Satellite Pro A40 - will not power

  The laptop will not power, just a flashing yellow when the power connector is plugged?

  Hello

  Read here before you discuss your problem, please:

  http://APS2.toshiba-tro.de/KB0/FAQ6201DK0004R01.htm#

• Satellite A200-AH7 - will not power on, only power LED blinks

  Hello

  I have this laptop where all of a sudden it turned off and does not turn upward. All that happens is this flashing electric blue. I tried to remove the battery and just go out of the adapter. I tested the cards that I have two and both seem fine.

  Any ideas?

  Thank you
  Chris

  Hi motopsycho,.

  I think that this flashing of the LED will display an error code or something else that would be useful information for an authorized service provider.

  In any case, before contacting these guys here you should read this article:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=21

  If this doesn t work, contact the nearest authorized service provider. Guys are going to solve this problem for you. :)

• Re: Satellite T110-107 will not start in the form of recovery option using the f8 key.

  I tried several times and can't get the option of recovering your system by typing intermittently the * key f8 during the startup * as it says in the manual, it will just directly in Windows. I just installed the latest version of the BIOS, but that did not help either. I have no recovery discs, but I would get the f8 problem solved in any case. Everything else works perfectly. Thank you.

  Hello

  Maybe you didn t press F8 in the right way
  You must press F8 immediately after the laptop has been powered!
  Press several times to be sure 100%

  If this does not work, create the recovery disk! This should be done first before you do anything with the laptop!
  The recovery disk is always important and useful if something goes wrong with the HARD drive!

  After you create the recovery disk using this drive to put the laptop in the same State as on the first day of purchase

• Satellite M30-604 will not write on DVD

  I've been sucessfully copy data to a CD with Nero in the past and decided to try to copy to a Verbatim 4 x certified DVD - RW and have no chance (says the 'negative' RW was compatible with Tosh). Tried in Nero but it gets stuck on "waiting for the drive to become ready". Tried Drag and Drop but it ask me to insert a disk.

  I tried to reinstall the Toshiba DVD-RAM driver (but I have no idea if this is what I need), unchecked the "enable CD writing on this drive" in the properties of the D drive, but so far without success. My laptop has a DVD-R/RW drive which I guess, allows me to copy data on DVD. Any help greatly appreciated, I don't know what else to do!

  Thank you very much

  Hello

  as a first step, you need to uninstall one of the burning software and try to burn a DVD again!
  Then you need to update your Nero, it may be that you are using an older version that is not able to burn DVDs with your car!
  A firmwareupdate of your player is also helpful! You can download it from http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

  Goodbye, Meier

• Satellite M35x-S161 will not work on battery

  My Toshiba Satellite M35x-S161 will not work on battery power.

  With external power supply, the battery status icon see the stack of 90 to 99%, but if the external connection is deleted the computer will immediately dead.

  By pressing the power button with the power supply disconnected, nothing happens. There is no light.

  I suspect the battery is dead, but why it doesn't show 90-99% full?

  Hello

  In my opinion, your battery is dead.
  My old battery was always full, but I could use the laptop to only for 1 min.
  While the battery was empty

  There is nothing unusual issues you may encounter in using mobile phones
  The battery can die one day.

  In my opinion, the battery needs to be replaced

• Satellite Pro M10 will not start again and comes up with the error message

  My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
  The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

  What can I do to get the notbook again reboot?

  Hello

  Seems that there are problems with the files of GoBack.

  Try to boot in safe mode and remove the Norton System works from your laptop ;)
  If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

  Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

  Good luck

• Satellite M30-107 - guard wireless disconnect and never connects

  My Toshiba Satellite M30-107 with Intel (r) PRO/Wireless 2200BG Network connection is not connect wirelessly. I know that there is no hardware problem, because I used this laptop to different wireless networks in the past, and just recently I formatted my laptop using the recovery disk Toshiba gave with it.

  I set up the wireless entering the SSID and network key. But the wireless connects with the Excellent signal is only for a second and then disconnects, then reconnects, disconnects. After doing this for a while, it remains offline.

  How can I do to connect and stay connected as it should?

  It is not easy to say why all this happens. I also think that your laptop works well, then maybe you should check the router. Reboot the router and check the WLAN connection again.

  For a moment turn off WLAN protection and check if the same problem happens without entering the network key.
  Setting router to run on 802. 11 b / g only and check again.

  Play with these settings. Have you bought a new router? I mean if everything was OK in the past I m wondering why you are facing this problem now.

• Function FN keys don't work no-Satellite M30-107

  Hi all

  I have an old M30 - 107 that I recently reinstalled and updated the operating system.
  The function keys control the screen brightness, volume etc. do seem to work.
  I think that I've updated all the drivers for the laptop.

  Is there a specific driver (ie the chipset driver package) I should be looking that control these function keys or should they train with intervention of Ant in a pack driver bios etc. related?

  Satellite M30-107 XP edition SP3

  Thanks in advance... C.

  Satellite M30-107 is a part of the PSM30E series. Is this good?
  You can see this number when you look at the bottom of the unit. There should be a label with the model number.

  Go to the page of European driver of Toshiba and searching for archiving.

  Choose + Archive-> Satellite-> Satellite M Series-> Satellite M30-> Win XP +.

  You must download the * common Module *.

  This common module must be installed first!
  Then, you need to install additional software like Touch Pad on / off utility Hotkey utilities for display devices.

  These programs will allow the Fn keys

• Equium A60-157 will not power

  Hi people!

  Could someone offer a bit of expertise and tell me whether or not the series Equium A60 - 157 has a center pin in its socket? I need to know that my laptop doesn't have one and it will not power! I'm deeply frustrated because I paid at the time £999 and it doesn't work!

  I have a feeling that the PIN has cracked and is now part of my dc adapter but I need to be sure before I get it fixed!

  Also if this is the case anyone Kow how much it may cost to do fix an indicative maybe!

  Cheers for your help!

  Nick

  Hi Nick,

  Yes, I think the A60 use an outlet that has a central pin. The CAP at the end of the head of the AC must have a central hole. You can find that the spindle broke and is now stuck in the plug on the power cord. This is not a rare event on the series of satellites, laptops.

  The bad is more Servicers will simply replace the motherboard (where the socket is together) rather than perform a repair to the component level. It is obviously a costly option for you, but is probably more faster/easier for the repairman.

  I have, in the past, tried unsuccessfully to find a source for the plug for my A30 (just in case) but I only managed to find a supplier who could provide a component of second hand provided by a junk motherboard. :-(

  Kind regards

• Satellite A 200 will not be stopped correctly

  My Satellite A 200 will not be closed down whemn I close the system. Only solution I can use is now 'hard' shut down, using power button, but this isn't the right way.

  Is this a known poblem? Can you give us some solution?
  Jeroen pool

  Maybe a process that runs in the context of the operating system can't shut down properly and therefore the Windows operating system cannot stop.
  I've seen questions on different computers.

  I think you should try to clean the registry with the 3rd tools i.e. CCLeaner. It s for free and can be downloaded from various sites.

  If it does not help check if the new OS install helps solve this problem.

• Satellite M30-107: the DVD Supermulti drive burn DVDs?

  I have a Satellite M30-107 P - M 745 / XP HE / 512 MB / 80 GB / 15.4WTFT / DVD SuperMulti / WiFi.

  His CD/DVD player is described as: DVD Supermulti drive compatibility: CD-ROM, CD - R, CD - RW, DVD-ROM, DVD-R, DVD - RW, DVD + R, DVD + RW, DVD-RAM
  Maximum speed: reading: CD-ROM 24 x, 24 x CD - R, 12 x CD - RW, 8 x DVD-ROM, 4 x DVD-R, 4 x DVD - RW, 4 x DVD + R, 4 x DVD + RW, 2 x DVD-RAM / writing: 16 x CD - R, 4 x CD - RW, 8 x HS CD - RW, 4 x DVD-R, 2 x DVD - RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM

  Can I use this disc in WRITING ("burn") the DVD and if I can, I need any special software and what type of disc can I use.

  I would use it to back up the laptop.

  Thank you.

  Hello

  Why you ask? You have published the specifications of player and according to these specifications of hardware of the player are able to write on 16 x CD - R, 4 x CD - RW, 8 x CD - RW HS 4 x DVD-R, 2 x DVD-RW, DVD + R 2.4 x 2.4 x DVD + RW, 2 x DVD-RAM.

  For me it s case. You can write data and files on the DVD s
  I use "Nero burning ROM" software to burn it to CD or DVD. In my opinion it's the best program and very easy to use.

• Satellite 2410-303 will not read the product recovery CD

  My satellite 2410-303 will not read my product recovery CD.
  When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

  Hello

  It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

  Just a question: I guess you want to recover your machine, Don t you?

  See you soon

• Satellite M30-107: WPA and WEP security software

  I want to connect my Satellite M30-107 P - M 745 to a network of wifi MIMO inverters to date.
  I bought a router and a PCMCIA adapter.
  I wish security WPA and WEP setup - I need any special software Toshiba on the PC itself to do so, or simply use the software that came with the router and adapter card?
  Thank you

  Hello

  There is no software Toshiba for the WLAN settings. Toshiba has created the only monitoring software called ConfigFree. By using this software, you can watch the WLAN and LAN connections. This software can also help you identify a connectivity problem if occurs.

  Back to your question: for WLAN settings, you can use the standard Windows WLAN settings or use WLAN data by software adapter settings. Please, make sure the wireless network adapter supports WEP and WPA encryption and also make sure you use the right settings on the router.