Satellite M300 - dispasspeared of the taskbar

Similar Questions

• Satellite M300 - driver downloaded, the files are corrupted

  Hi all

  I have a Satellite M300 when working there, I bought in Asia.

  HARD drive died and had to be replaced with the nightmare of normal to find drivers, the main problem being the only site that recognizes the model number - PSMD4L Toshiba Asia. Unfortunately the dosent work section download drivers, I tried from different places, different computers etc. but all of the download files are corrupted and there is noway contact Toshiba Asia!

  Frankly I'm amazed that a company like Toshiba doesn't have a handle on all the models produced around the world + support for drivers simply incredible!

  How can anyway sorry yell someone has any suggestions, I get the drivers?

  Cheers for any help

  Rich

  Why do you think that the drivers are corrupt?
  Did you receive any error messages? If Yes, which?

  What drivers did you tried to install?
  What operating system do you use?

• Won't start not satellite M300 - system on the disk volume is damaged

  OK on the 1st...
  Today, I turn on my laptop but it just will not start until... stop just at the TOSHIBA LEADING INNOVATION he...
  and the drive light lit upwards or blink.

  After that I tried the several times, it starts.
  When I went into windows, IE opened, it hangs again.
  After a while a black screen with a mouse crusor only...

  I tried to turn it back on it... it comes out the window repair.
  after repair, he says that:
  "the system on the disk volume is damaged."
  'system QuickIN' file is repair.
  but always after some time, the problem came again...

  So I wonder what problem is that and what can I do to solve this problem?
  Is a software or hardware problem?

  Hello

  For me, this looks a bit like a HARD drive problem.
  I guess that HARD drive developed and the hardware error.

  Have you checked if the HARD drive is listed and recognized in the BIOS?
  Do this!

  If the HARD drive is not visible in the BIOS then it would mean that the HARD drive is dead and must be replaced.

  Even if the HARD drive would be listed in the BIOS, you test another new HARD drive to check if the problem is not related to the failure of HARD drive.

• Satellite M300 - built in microphone does not work

  Hello world

  I bought a new laptop of Toshiba Satellite M300 series and the buitin microphone works in it.
  Any help would be gr8

  Hello

  Satellite M300 is unclear to me that I guess that it s not a European series of Toshiba.

  You said that the microphone doesn t work, but are you sure that this laptop was equipped with the internal mic to 100%?

  In many cases claim that a device internal doesn t work but in most cases such device (internal microphone for example) is not available.

• Satellite M300 switched on after using surf the net

  Hello

  I find out that this forum, I hope, can help answer my question.

  My Satellite M300 laptop with ATi graphics card
  Normally I use net surfing with Lan or Wifi turn off properly.
  But after a few seconds the machine automatic lights.

  The service center people have no idea of this problem after motherboard change, wifi, lan Board, camera cable, adapter, ram but still the same problem occur.

  Can someone help me answer? :(Merci.)

  To be honest, your ad is rather confusing, and I don't understand any of your problem.
  Maybe just your English is so bad. ;)

  If I understand you just your laptop wakes up alone. Right?

  In any case try to disable wake up on LAN in the BIOS settings.

• Satellite Pro P300 - 23L - horizontal lines on the taskbar

  I have a portable Satellite Pro P300 - 23L.
  Last night it suddenly appeared, about 30 horizontal thin white lines on the taskbar (actually on the bottom half inch of the screen).
  The top 3 or 4 of these lines seem to pulse in a fast and regular way.

  Now, I can barely see the icons in the taskbar, or the button to start in the lower left corner.

  I read on another forum that the problem may be due to a problem of "grounding".
  The charger plug is actually broken and repaired the wiring myself, but that some time previously, so it is possible that a connection is loose or is now was something shorting causing this effect.

  I had to order a new charger but in the meantime would appreciate any assistance in order to confirm or deny that this could be the problem.

  Any advice on how to remedy this?

  Hello

  If the problem would be with the power adapter this lines should NOT be visible using the laptop with the battery. Right?
  Therefore, it would be really interesting to know if the same lines are visible if the AC adapter is not plugged in.

  But I think that this is unrelated to the power adapter. In my opinion its a display issue or a graphics card problem.
  Therefore, you must connect an external monitor to check it out.
  If the same lines are visible on the external monitor, the graphics chip is assigned the case, it could be a display problem.

• Satellite L830-10U: WIn 7 Volume icon missing from the taskbar + cannot display

  Hello

  I have a satellite L830 10U with Windows 7

  I don't see the volume icon in the taskbar.

  I tried to turn it on, but the option 'Show icon /notifications' doesn't show any icon, just the plain text
  and the tab system icon (volumen, battery, net,...) the volume icon is gray not selectable

  Any ideas?
  Are Toshiba and Windows updates interfere somehow?

  Thank you

  This isn't portable problem, but your system is confusing upward.
  Check this YouTube video that shows you how to re-enable this sound icon:
  [Volume icon is disabled or grayed | http://www.youtube.com/watch?v=zl_-4T8Uf8k]

  Its about Vista, but should work for Win 7 too

• Satellite A500 - icon Volume missing from the taskbar

  My volume icon disappeared from the taskbar (Satellite A500 / Windows 7). When I right click on properties to display the 'enable or disable system icons', the volume icon is there, but can not change off to on as the 'stop' is grayed out.

  Someone at - it indexes?

  Hello

  Maybe your card its isn't recognized properly. Have you checked for yellow exclamation marks Device Manager?
  Maybe the audio driver. You can find the latest version on the Toshiba site.

  Normally you can toggle the icon of volume if you in Control Panel > sounds and Audio devices.
  Check it!

• Satellite M300 (PSMD4L-063004) - where to find the drivers for Windows 7?

  Please help me find drivers (lan, wifi, sound, display) and for this model mass storage controller. Only now, I installed Windows 7 RTM.

  I would greatly appreciate a quick response. Thank you very much.

  Hello

  I checked the Web from Toshiba site and it seems that the Satellite M300 PSMD4L is an Asian model. This means that you can get all the drivers on this page:
  http://www.PC.Toshiba-Asia.com

  But Windows 7 are not available at the moment. :(

  I think that they will be released after the official release of Windows 7. If you find a few weeks later and maybe the Satellite M300 will not support Windows 7. Who knows

  What you can do is to install the Vista drivers. Most of them are also work on Windows 7, so I think it's worth a try!

• Satellite M300 - how to use the recovery disk creator?

  Satellite M300

  How to use Recovery Disc Creator and what is the main function of Recovery Disc Creator?

  Hello

  I guess you didn't read the manual again because it explains quite well what is the recovery disk creator.

  However, this tool creates the Toshiba restore disk. This disc contains a picture of the factory settings. This means that the Windows operating system that is pre-installed with all the drivers and tools of Toshiba. It of easy to use (just boot from the disc), simply follow the instructions on the screen.

  For example, if you install another Windows or Windows peut t start you can use this disk to recover a system that works.

• Satellite M300 PSMD4A - Windows Vista is unable to load the user accounts

  OS: Vista Business 32 b
  Model: Toshiba Satellite M300 (PSMD4A)

  Problem: When I turn on the laptop it charges upwards which is usually the login screen, but it does not display * all * accounts of users and, therefore, it is impossible to connect!
  Survey: I started the computer in safe mode, that the logging in process works very well. I thought it might be a mistake with the scanner finger print driver device manager still had no problems with it, but I discovered the + security processor loader driver + had the error code read 24 ' + this device is not present, is not working properly or is not all its drivers installed + ' I couldn't find something online that explains how to fix this error.

  Note: I said that the splash screen was previously empty and contained only the vista background startup and loading icon turns with the words "+ Please wait +" and a flick every now and then as if failure to sign what ever he was having problems with. I don't know when that changed sypmtones as now he did not come with please wait and an icon of spinning but rather with + just + ease of use and close buttons.

  Cry for Help: If anyone of you has an idea of what I should try to do that would be much appreciated. If you need more information please just ask.

  Thank you

  HM, that's a good question

  I think I can t really help you, but have you tried to reinstall the operating system from the Toshiba Recovery disk?
  I think that after that the problem needs to be solved.

  Maybe someone else can explain, why they have this error or has another idea.

• Satellite M300 - how to identify the model number?

  Hi all

  Someone knows how to identify my model number? On the bottom it says it is PSMD4L-O1E00C model and serial number is 48188716W but when I go to http://gedb.toshiba.com who must tell me the model number for use on the Web site for drivers etc it says - Combo series and model valid, couldn't find it in our database. Please try again

  Ive tried all combinations, in the case of O are zeros or O ideas?

  Its a satellite M300, I bought in Singapore

  Hello

  To be honest, I never saw this Toshiba site
  Normally, the numbers are correct, because I compared it with my laptop.

  However, why you n t download the drivers on the site of Toshiba Asia? Here, I founded your model code, PSMD4L:
  http://www.PC.Toshiba-Asia.com => Services & Support

• Satellite M300 - how do I back up the data before using the recovery disk

  Hello everyone,

  Today, I closed my laptop Toshiba Satellite M300.
  Just after a few seconds, it automatically in service and reported some "boot error".

  She also suggested I put on the recovery CD. When I put the CD, nothing happened.
  After awhile, I read the instructions in the CD cover that says that I have to hold the C button and it will start the recovery process.

  How the process goes, the system told me that all the files that I had in the computer would be removed.
  Is it possible how I could back up my documents before as I recover my Vista?

  I would be very grateful if someone could help me!

  Sincerely,

  Milan

  Hello

  If I understand correctly, you are not able to boot into the Windows operating system; According to the normal starting procedure or by using safe mode. Is this good?

  If Yes, then I don't see many options to get access to the files on the HARD drive.
  What you could try is to remove the HARD drive and use an external USB 2.5 enclosure to connect the HARD drive on another computer.
  Then you could test whether it is possible to access the HARD disk and save the data.

  The Toshiba Recovery disk does not any option that allows you to save the data, the drive formats the HARD drive and erases all partitions.

• Satellite M300 - how to disable the LED F11

  Hello

  My sister just bought a Satellite M300. I think it is and the little light below the F11 key is now on and its making the rest of the keyboard...

  Someone knows how to turn it off?

  Thank you!

  Have you tried pressing FN + F11?
  Usually this key combination should disable this LED below the F11 button ;)

  Check it out!

• Satellite P10 804: how to activate the battery icon visible on the taskbar?

  How can I activate the battery icon visible on the taskbar? Currently, I only have the type of mode e.g. bulb & color to save energy.
  I tried to activate the right click on the bar of tasks/properties/notification areas, found it necessary to icon & loaded to show always, however, the batery icon remains hidden.

  Help?

  This will not help you the battery icon appears only if the laptop is disconnected from the AC adapter and run only in battery mode.