Satellite M300 switched on after using surf the net

Similar Questions

• Satellite Pro 6100: BSOD after use of the 6000 SP recovery CD

  My 6000 Pro Satellite recently bitten the dust after several years of daily use. I just bought a used SP6100, after which I tried to use my SP6000 product recovery CD to do a reformat. Since when I Stop (obviously common) * 0x0000007B (0xF9680640, 0 x 0000034 etc.) error and blue screen on reboot.

  Is there a way to turn it? I had not thought about media recovery is specific to a single model (and the 6000 and 6100 are quite similar in terms of model anyway), but is this the case?

  Thank you very much for all the advice

  Cannot use the recovery CD on the different laptop models. Perhaps the two Satellite 6000 and 6100 are similar, BUT not even.
  Different drivers and chipset utilities are used on these books.
  The restore CD contains all drivers and utilities, and it seems that the blue screen error message appears because some applications and drivers are incompatible and unsupported on the second satellite!

  So if you want to use the Sat 6100 you should install the OS from the original CD of Microsoft and then visit Toshiba s driver and download the RIGHT and compatible drivers.

  Good luck

• Satellite M300 - how do I back up the data before using the recovery disk

  Hello everyone,

  Today, I closed my laptop Toshiba Satellite M300.
  Just after a few seconds, it automatically in service and reported some "boot error".

  She also suggested I put on the recovery CD. When I put the CD, nothing happened.
  After awhile, I read the instructions in the CD cover that says that I have to hold the C button and it will start the recovery process.

  How the process goes, the system told me that all the files that I had in the computer would be removed.
  Is it possible how I could back up my documents before as I recover my Vista?

  I would be very grateful if someone could help me!

  Sincerely,

  Milan

  Hello

  If I understand correctly, you are not able to boot into the Windows operating system; According to the normal starting procedure or by using safe mode. Is this good?

  If Yes, then I don't see many options to get access to the files on the HARD drive.
  What you could try is to remove the HARD drive and use an external USB 2.5 enclosure to connect the HARD drive on another computer.
  Then you could test whether it is possible to access the HARD disk and save the data.

  The Toshiba Recovery disk does not any option that allows you to save the data, the drive formats the HARD drive and erases all partitions.

• Surfing the net I want already seen sites to change the color so I don't keep looking on the site even after an interruption

  When they surf the net I get many interruptions, telephone, electronic mail, either, and when I come back to the web feature, I have no idea where I stopped and again display the same sites to the wire. I want these sites to change color once because I know where I started and stopped. Thank you.

  Make sure that you are not Firefox running in permanent private browsing mode.

  • https://support.Mozilla.org/KB/private+browsing

  To view the history settings and cookies, choose:

  • Tools > Options > privacy, choose the setting Firefox will: use the custom settings for the story of
  • Uncheck the box: [] "always use the navigation mode private.

  Also, make sure that you keep the history.

• Impossible to surf the net using wireless C4580

  Hello

  I have on C4580 and when I turn the printer wireless on my Internet crashes any type of

  I can print and I can find computers on a network, but I can't surf the net

  I don't know why this is happening.

  I already fully "restarted" configs router and printer and I have nothing...

  What can I do?

  Open web page internal printer by accessing its IP address.  Select networking and wireless (802.11).  Under the IPv4 Configuration tab, select manual IP:

  • For the manual IP address, use the IP address of the printer to the existing address with a lag.  For example, if the printer's IP address is 192.168.0.5, then use 192.168.0.30.
  • Manual use the mask subnet 255.255.255.0
  • For manual default gateway, leave blank.  This is important.

  Select manual DNS server:

  • Fill the oil fields in preferred DNS server and DNS server auxiliary manual Manual.  This is important.

  Press on apply.

  Turn off the wireless router, the printer and all the computers connected to your network.  Wait 60 seconds and then turn on the wireless router and then turn on the printer.  Then turn on the computer.  You should be able to browse the internet while the printer is also on.

  Finish by installing the SW on the computers that you want to print from.  A suggestion more - do not install the HP Customer Participation program.

• Guest OS using NAT and host wireless can ping Google but can't surf the net

  Hi all.

  I just installed 'Vmware Workstation ACE Edition' Version: 6.0.0 build-45731

  I then installed a new virtual machine Windows XP SP2 home edition.

  My host is a business of W7, browse the internet using a wireless network card. (I currently don't have a way to have the physical NIC connected to it).

  My conf wireless host is:

  LAN wireless adapter wireless network connection:

  The connection-specific DNS suffix. :

  ... Description: Connection network Intel (r) PRO / Wireless 3945ABG

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  IPv4 address: 192.168.1.33 (Preferred)

  ... Subnet mask: 255.255.255.0.

  Lease obtained...: Thursday, December 2, 2010 10:50

  Lease expires...: Sunday, December 5, 2010 10:49:59

  ... Default gateway. : 192.168.1.1.

  DHCP server...: 192.168.1.1.

  DNS servers...: 192.168.1.1.

  NetBIOS over TCP/IP...: enabled

  The goal is simple: be able to surf the web with my guest OS (Windows XP Home edition).

  I first tried to bridge with VMnet0 = > KO (no ping, no navigation)

  I then tried NAT which is by default bound to VMnet08 = > always KO but:

  -I can ping google.com:

  Ping google.com http://173.194.36.104 with 32 bytes of data:

  Reply from 173.194.36.104: bytes = 32 time = 765ms TTL = 128

  -I can not always surfing the net

  When you activate NAT on the guest operating system the ipconfig gives the following:

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : localdomain

  ... The IP address: 192.168.31.128

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. : 192.168.31.2.

  I do not have an anti virus installed on the client

  I tried to disable windows firewall with no luck

  I tried telnet google.com port 80 = > KO

  C:\ > telnet google.com 80

  Login to google.com... Could not open connection to the host, on port 80: Co

  nnect failed

  Any help, tracks, ideas, would be greatly appreciated.

  Thanks in advance

  Michael

  Just an info, Windows 7 is not a host VMware Ace/Workstation 6 operating system.  Also why do you install 6.0.0 vs install 6.0.5?

  Have you tried to manually set DNS servers to no known public IP address just leave it to the private IP address that you have shown by default?

  Give a try:

  OpenDNS

  208.67.222.222

  208.67.220.220

  Or

  Google Public DNS

  8.8.8.8

  8.8.4.4

• Frequently, my computer stops and restarts all am surfing the net? What should I do?

  Frequently, my computer stops and restarts all am surfing the net.  What can I do?

  Hello

  1. what type of internet connection do you use? What is a wired or wireless?

  2. you receive messages or error codes?

  2. did you of recent changes on the system?

  Step 1:

  You can check the following items and check if the problem occurs in safe mode with network.

  Start your computer in safe mode

  Startup options (including safe mode)

  Step 2:

  If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

• Mysterious Thunder Sound while listening to music or just surfing the net

  Original title: mysterious Thunder Sound

  While listening to music or just surfing the net, this sound loud Thunder comes out of nowhere and it's scared the heck out of me when I least expect it. Nothing, I downloaded had this sound with it.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  Try to check and clean the boot.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: To restore your computer to a Normal startup mode, follow these steps:

  a. click on start in the box start the search.
  b. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  c. under the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart.

  Similar problem: http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/f8d1eed4-e324-438c-8a81-31579009c5c8

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Satellite M300 (PSMD4L-063004) - where to find the drivers for Windows 7?

  Please help me find drivers (lan, wifi, sound, display) and for this model mass storage controller. Only now, I installed Windows 7 RTM.

  I would greatly appreciate a quick response. Thank you very much.

  Hello

  I checked the Web from Toshiba site and it seems that the Satellite M300 PSMD4L is an Asian model. This means that you can get all the drivers on this page:
  http://www.PC.Toshiba-Asia.com

  But Windows 7 are not available at the moment. :(

  I think that they will be released after the official release of Windows 7. If you find a few weeks later and maybe the Satellite M300 will not support Windows 7. Who knows

  What you can do is to install the Vista drivers. Most of them are also work on Windows 7, so I think it's worth a try!

• Satellite P100-429, stopped after you create the partition on the HARD disk

  After you create the partition on the HARD disk. PC just stopped.
  After using the restore CD, nothing happened again, any ideas?

  Hello

  Express media player has been installed on the partition of the laptop?
  I can give you a good solution for 100%, but there may be a conflict between the express media player partition and the new partition.
  Have you installed the OS on the new partition?

  Hey Buddy, try to delete the entire partitions in the HARD drive and format the HARD drive completely. Then try to use it again the Toshiba Recovery CD and install Toshiba image on the HARD drive.

• Bring item full screen after use of the 3D camera and changing point position/orientation

  Hello.  I am a new user of After Effects.

  After you apply the 3D camera and make adjustments and also make adjustments to a position of individual items and the orientation in 3D space.

  is there a way to get one full screen (and directly to the camera) once again, other than doing 'eye '?  Is there a feature or mathematics that will get the item mode full screen

  as if you do not apply 3D or or changes of position?

  Said another way, if I have several parts of the video on screen, turned them all 3D, changed that position and orientation, then applied a 3D camera and adjusted that

  so no items are full-screen one, then you want one of them to return to full screen mode, can add you values of parameters of the element and the camera may be a value

  which translates into a single element to a full screen/straight on angle (as if the 2D and not affected)?

  Thanks in advance for any direction.

  Hey brvid

  The easiest way is to:

  -Start with your image full screen

  -Click on the box for this layer 3D

  -Add a camera (which uses the current view for its zoom/position)

  -Add a null value, click on the 3D box so that the null value

  -parent the camera as NULL. That the null value has the same ISP values as image

  Now, you can duplicate this image and place around the scene in any position and rotation.

  - Then you can copy values ESP of other images as the key your null and the camera images will move to this image and it will be full screen

  Hope this helps,

  Steve

• Satellite U500 - 11 c - after updating Win7, the eco button no longer works

  Hello

  Recently I upgraded my OS from Win Vista 32 bit to Win 7 32 bit with the TOSHIBA DVD and since then, the eco button no longer works.

  When I press on it, the laptop is not set the eco mode.

  Does anyone have the solution for that, please?

  Hello

  I'm a little confused about your ad m...
  You wrote this eco mode works well but if you press the button it doesn t switch?

  However, as the written Timox try reinstalling the Eco utility * and * value-added package. The two you can find here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite A200: No audio after update SP1 and NET Framework

  Hello

  After my laptop Satellite A200 update Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86 and
  Internet Explorer 8 for Windows Vista, the speakers and the headphones stopped working.

  When you go to the speaker icon in the taskbar, it says "No. AUDIO OUTPUT DEVICE INSTALLED.

  I'm confused.

  Can someone help pleeeeeeeease.

  Thank you

  Hello

  I think you should just go to the Device Manager and should remove (uninstall) the audio driver.
  Then go to the Toshiba European page, choose your model of laptop, download the audio driver and unzip the package.
  Reboot the laptop.

  After the Win operating system has started, the new device (sound card) should be recognized and the operating system asks for the driver.
  Now, you must point to the driver package that you have downloaded from the page and must be reinstalled the driver.

  Check it out!

• My computer is no longer able to connect to the internet. I can download updates of Windows and Adobe but not surf the net in the browser.

  original title: internet connectivity

  My computer is no longer able to connect to the ' net.  This ab took place two months ago.  I still get updates from MS and Adobe, but will not connect to any Web site.  I've tried wired and wireless.  All my other computers are connected again and the router and the modem seems to work properly.  This occurred after a windows update has been installed automatically while I was away and there was no restore points.  Other connectivity issues, the system works properly and I am connected to my local network, not just the internet.

  Hello

  You can follow below link that can help you to solve your problem:

  Reset Internet Explorer settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-8-settings

• Satellite L510 - WLAN disconnects after having ejected the disk USB

  Hey.

  I got my computer Toshiba laptop a few months and have been having this problem early. Initially, it was not the case very often and so it wasn't if big a deal, but now it's getting boring because of the frequency.

  What's happening:
  After I eject any USB connection (the most frequent with my external HARD drive and other kinds of USB keys), my wireless network connection disconnects.

  I always try to go to the tab 'network and sharing Center' and 'disable' and 'activate' the connection, but it rarely works. Most of the time, the pop-up that says something like "allowing wireless connection" doesn't go away. It sort of 'crashes', but not exactly either, as I am still able to use other parts of the laptop. I tried many things, but the ONLY fix I found is to restart the computer.

  HOWEVER, it is not a normal reboot. It takes about 7-10 minutes to restart. There is this blue screen of ms back (is that what it's called?) immediately after it restarts, but it is only there for like 3 seconds and then he asks me if I want to start windows in normal mode or safe mode.

  I would really appreciate if someone could provide any kind of fix for this.

  My laptop:
  -Satellite L510
  -Windows 7 64-bit OS
  -pentium (R) dual-core CPU T4500 2.30 GHz
  -2 GB of ram

  Hi captainmarvel,

  Just a simple question: have you tried to update the driver WLAN?
  New driver WLAN, you can find on the official website of Toshiba in order to check this!

  Well, I never really heard this about WIFI disconnects after the ejection of a USB drive. That's really curious.
  You write that you are running Windows 7 64 bit but it is preinstalled Windows 7 in Toshiba or not?