Satellite M300 - how to disable the LED F11

Similar Questions

• How to disable the LED on Satellite A210 Panel

  HY,

  can someone help my please?

  I want to disable the led on my laptop (this satellite sign shining in blue).
  I tried the Assistant but there is no option to turn on the light switch.

  Hello

  You can disable this illumination in the BIOS.
  Access the BIOS, set the disabled o lights and save the changes before you let the BIOS settings.

  Check it out!

• Re: Satellite L655 - how to disable before LED?

  Goodmorning everyone,

  I would like to know how to disable the front LED the L655 when the laptop is turned off.

  Now, when it is turned off and plugged, 2 LEDs (white) are lit on (one because that is plugged in the laptop and another because the battery is completely charged). Is it possible to disable these LEDs when the laptop is turned off?

  Thanks in advance.
  Nicolas

  Hey Buddy,

  These LEDs you can t turn on short and crispy.

  This is why you must unplug the AC/DC adapter, and then all the lights are off.

• Re: How to disable the LEDs on my Satellite L500?

  Hello!
  I have a Toshiba Satellite L500 laptop. The LEDs are activated 5 'under' the touchpad and one to the left of these (orange).
  How can I turn off, at night they are boring for me?
  Thank you.

  Hello

  This is the only way to turn them off is off of the laptop and unplug. Otherwise, there is not another method to do. the orange is witness of the wifi, you can disable it with switch Wlan if available or pressing Fn + F8

  Welcome.

  Post edited by: Jeka-HE

• Re: Satellite L50-A-1 - Synaptics touchpad - how to disable the LED status

  Hello
  I recently reinstalled my touchpad driver because they had collapsed for a reason any.
  And the surprise of the ow Ow.
  Now the "fn + F5' shortcut keyboard no longer works, but I can turn my touchpad by double check the upper left corner. OK, why not.
  What's annoying me is the white really led indicating when the touchpad is disabled. It really attracts the attention.

  Is there a way to disable it please? (even if that means to disable the shortcut 'double tap corner' and find a way to reinstall the "fn + F5" shortcut)

  When you remove the Synaptics software you will lose a few additional touchpad options but all the basic options will always be there. In General, you can use touchpad with basic options. It's your decision.

  I n t have this computer laptop, model and don t know how it works exactly, but on my machine, I can disable illumination in the BIOS settings. Have you already checked the BIOS settings?

• Satellite M300 - how to use the recovery disk creator?

  Satellite M300

  How to use Recovery Disc Creator and what is the main function of Recovery Disc Creator?

  Hello

  I guess you didn't read the manual again because it explains quite well what is the recovery disk creator.

  However, this tool creates the Toshiba restore disk. This disc contains a picture of the factory settings. This means that the Windows operating system that is pre-installed with all the drivers and tools of Toshiba. It of easy to use (just boot from the disc), simply follow the instructions on the screen.

  For example, if you install another Windows or Windows peut t start you can use this disk to recover a system that works.

• Satellite A500 - how to change the LED display?

  Hey.

  Does anyone have guide how to change the display LED of Toshiba Satellite a500?
  I tried irisvista.com but there is only a guide how to replace an optical drive in this model, but nothing on the screen.

  Thank you.

  Don t always start a new thread on the same topic.
  Please follow the firstto:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=53875

• Satellite M300 - how to identify the model number?

  Hi all

  Someone knows how to identify my model number? On the bottom it says it is PSMD4L-O1E00C model and serial number is 48188716W but when I go to http://gedb.toshiba.com who must tell me the model number for use on the Web site for drivers etc it says - Combo series and model valid, couldn't find it in our database. Please try again

  Ive tried all combinations, in the case of O are zeros or O ideas?

  Its a satellite M300, I bought in Singapore

  Hello

  To be honest, I never saw this Toshiba site
  Normally, the numbers are correct, because I compared it with my laptop.

  However, why you n t download the drivers on the site of Toshiba Asia? Here, I founded your model code, PSMD4L:
  http://www.PC.Toshiba-Asia.com => Services & Support

• Satellite M300 - how to use the recovery disk

  Hello world

  I was wondering how to use the 2 recovery discs that I burned recently if I wanted to fix my USB ports (as seen in my Toshiba M300 - wire to USB ports)

  Any suggestions?

  Hello

  You can use the only recovery disk to reinstall the whole OS!
  This means that the use of the recovery disk will format the whole HARD drive and will set the laptop back to factory settings!

  If you want to use the recovery disk and then insert it into the ODD and the start-up of this disc.
  Then the installation of the OS should move forward and you should follow the instructions on the screen.

  All that s

• Satellite P750 - how to disable the volume control beep?

  Hi all

  I'm about to buy a Satellite P750, but one thing bothers me about this model. When the volume control keys are used there is a too beep each time that his press. s there is sort of this deactivation via software or BIOS settings?

  I asked around, but sales people I have talked to don't know and I don't have time to travel around to find an expert on Toshiba laptops.

  Any help would be appreciated to greaetly. Thank you.

  Hello

  On model previous laptop (Satellite P500) there is an option in the BIOS to disable the beep of the volume control buttons.

  You should find it in the BIOS-Advanced-Online System Configuration online. There is an option called beep that you can disable.

  Can you confirm this option on Satellite P750?

• How to disable the LEDs on a Qosmio x 300?

  Hello
  I got a qosmio x 300 and recently I switched from vista to seven, and I lost all the drivers that were pre-installed on the pc. I would like to disable the Red LEDs on the pc, and I can't find a driver for this... anyone could help get me this place?
  Thank you
  panoramx

  In a first step, enter the BIOS settings and check if you can disable them here. He must be somewhere in the advanced options of the BIOS.

  Install package from Toshiba for Win7 added subsequently.

• Satellite L640 - how to disable the touchpad?

  G ' Day all the

  First post on this Forum
  Just bought a new L640 and yet once find the integrated touch pad a nuisance absolute crap

  In the past I have pasted a big piece of cardboard top to try to disable it - or at least to limit its interference, but now I would like to disable this shit constantly. I'm sick & tired of him

  I went into msconfig and unchecked 'synaptics pointing device driver' without any changes occurring. I did a search in the forum on "disable Touchpad" and not got satisfactory answers...

  so nobody how?
  Thanks in advance

  Regards, Phil

  Hi Phil,

  You can disable the touch pad using the FN + F9 key combination.

  Check this box!

• Satellite L305 - how to disable the built-in webcam?

  I want to be able to use my logitech (plugged into USB Port) instead of integrated cam chicony webcam because I like it better. When I go on some chat sites w video option site usually selects the cam (from settings) and integrated SEES no one if I turned it on or not.

  Can anyone help? My search returns nothing useful - strange

  Thank you

  Hi crispy40,

  In my opinion the easiest is to disable the webcam in Device Manager, then right-click on your internal webcam and select Disable. The internal webcam is now disabled and usually only external one should be recognized.

  Check this box!

• Satellite A300 - how to disable the fingerprint

  In my A300 using Vista Home laptop request a print whenever I start it, I do not wish to use this feature and I am worried I or a member of my family might accidentally turn on, my question is how can I permanently turn it off, it has so far not summer enabled, thanks for you help.

  If this has been posted before that I apologize, but I could not find a previous post...

  Hello

  You can try to disable/uncheck software or applications of fingerprints in msconfig-> Startup tab.
  This would prevent the software to load automatically when you start the Windows operating system.

  In my case, it worked and could turn off the different applications and processes in msconfig.

• Satellite P50 - how to disable the option "project for a screen connected?

  I have a Toshiba Satellite P50.

  For some time immersed in the writing (usually after extended write) the "Project - project for a connected screen" window on showing me options "PC screen only, double, Extend and second screen only.

  It's very worrying because the window must be closed again and as a result the letters and numbers are missing in the text! - /

  Anyone know how I can fix this problem?

  Thank you

  I'm not quite sure what s wrong with your system, but by the function key F4 (or FN + F4) it of possible to switch between the external and internal display.

  From my point of few this message could be linked to the support of flash memory card utility that displays the menu of function keys on the screen.

  On the other hand, you can go from internal display to the projector connected using the Win + p key.

  I recommend the options mentioned for verification.