My windows fax tone stops shortly after the recipient fax tone is heard

Similar Questions

• laptop stops shortly after the start, but works well in safe mode / command after chkdk or ckdsk/r

  Problem 1: There are months, my two year old Toshiba Satellite L655 s5096 started losing charge the battery even when it is plugged.
  Sometimes, the problem was solved by using a different wall outlet. I replaced the battery, but eventually the problem comes back.

  Problem 2: at the same time that the problems loading starts, Windows has stopped booting normally. Sometimes repair or restoration leads to a normal start, but sometimes I run Chkdsk/r (Chkdsk sometimes the only works [!]) Mode through safe mode w/Command Prompt.

  Problem 3: There are two days of problems 1 and 2 reappeared, but a few minutes after that Windows starts, my machine stops, even if I am able to run Wndows in Mode safe mode w/network.

  I am correct in surmising that this isn't a motherboard (hardware) problem? I don't really want to have to replace this machine if I don't have to. Is this a Windows problem? Upgrade to Windows 8 would solve the problem? Or is it the result of the virus that escaped my Avast scans?

  I'll install Windows 8 when I checked my automatic online data storage works.

  Hi Denise,

  Thanks for posting your question in the Microsoft Community forum.

  I understand that the computer shuts down shortly after starting. I'll help you with this problem.

  1. what security software is installed?

  2. are you sure the workload problem is not limited to a faulty wall unit?

  3. have you checked with the manufacturer of the computer if it is not a battery problem?

  To resolve this issue, let us try these methods:

  Method 1.

  You can create a new power plan and check if that helps.

  Power plans: frequently asked questions: http://windows.microsoft.com/en-ca/windows7/power-plans-frequently-asked-questions

  Method 2.

  Keep the battery power: http://windows.microsoft.com/en-ca/windows7/conserving-battery-power

  Method 3.

  You can remove the battery and connect the power cable from the wall cabinet and check. If the computer does not stop after the restart, then it might be a problem with the battery.

  For any question related to Windows, please do not hesitate to contact us and we will be happy to help you.

• Laptop stops shortly after the start.

  I have a slight puzzle on my hands. I was working on a DV5-1012EA which had a damaged palm rest/touchpad. I found a replacement and very well equipped. I had the laptop works well and decided to run windows update. Everything seemed fine, but after a reboot (which seemed normal after a windows update) it was decided to close. I tried a few reboots but no joy.

  I then used a recovery disk but it was in the middle of the second "loading files" and he stopped.

  I ran the diagnostic test of the system via the ESC menu and fine tested memory, it stop at Midway through the HARD drive test.

  I tried to boot up a Linux live disk with no HARD drive, but once more, it has failed.

  I booted into the BIOS, but after 3 minutes it stop new

  I tried different hard disks and memory, but it makes no difference. The system just stops.

  What a coincidence it occurred after the Windows Update? I changed the material so any conflict caused by the update wouldn't be here.

  I can't think it is overheating of the CPU or GPU, and that is why he stops? Maybe all the work of dismantling the until that replace the touchpad/palmrest dislodged the thermal/thermal heatsink paste?

  Please can someone advise me because I want to make this thing run again and return to my friend?

  Thanks in advance

  Changy

  Hello

  Yes, as I mentioned in my original post, I booted into the BIOS, but it turns off after 3 minutes. It's what made me suspect overheating. It was very quick to stop if open windows, but slower with the BIOS that requires less work CPU.

  I have removed the radiator and check the thermal paste. I'll remove it and use the new thermal paste just to be sure

  Thank you

  Changy

• Message "Windows Explorer has stopped working" after the opening of the "Images".

  Hello.
  I have Windows Vista 32 - bit home basic OS with SP2.
  When I open "Images", I get a message saying "Windows Explorer has stopped working" with an option to restart the program, which just closes. The details of the message are:

  Signature of the problem:
  Problem event name: InPageError
  Error state code: c0000185
  Type of media loopholes: 00000003
  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033
  Information additional 01:40 d 4
  More information 2: 4062ad41ec8067256aa4c5e2b56d3c79
  Information additional 03:40 d 4
  Additional information 4: 4062ad41ec8067256aa4c5e2b56d3c7

  This error message comes just out of nowhere I do not install anything or make updates when this issue was raised. I tried to restart the computer, but it did not help.

  I checked for viruses, but none came.

  Then, I tried to do system restore, but it could not solve the problem.

  In addition, I used the command line to find the problem and found a few corrupted files, it has been unable to remedy.

  Details of SFC are:

  «2010-11-17 11:38:44, Member's file Info CSI 00000160 [SR] cannot repair [01:24 {12}] "settings.ini" in the sidebar of Microsoft Windows, Version 6.0.6002.18005, pA = Process_Architecture_Intel <0>...» »
  and there is more like that, but I don't know how to copy and paste these messages.

  I don't know what to do from here.

  I don't want to reinstall all of Vista. In addition, Vista is PREINSTALLED on my computer.

  Oh and I am not an expert in using the command prompt,-j' found how to do this in other forums.

  Please help on how to solve this problem.

  Thank you!

  Hello

  Norton search spyware however your question may be caused by or to the less aggravated
  by Norton.

  Norton/Symantec is known to cause strange problems and aggravate others. Better is to uninstall
  for a test by simply disabling will still allow pieces of it to install. Uninstall it and run the Norton
  Removal tool to avoid problems causing leftovers being left behind. The following recommendations
  to use when testing, even better all the time.

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  Norton Removal Tool
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  ------------------------------

  Here's what I use and recommend: (these are all free and very effective versions.)

  Avast and Prevx proved extremely reliable and compatible with all I have
  launched on them. Microsoft Security Essentials and Prevx have also proven to be very
  reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

  Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
  Operation of the network.

  Prevx - Home - free

  Windows Firewall

  Windows Defender (is not necessary if you use MSE)

  Protected IE - mode

  IE 8 - SmartScreen filter WE (IE 7 phishing filter)

  I also IE always start with asset if filter InPrivate IE 8.
  (It may temporarily turn off with the little icon to the left of the + bottom
  right of IE)

  Two versions of Avast are available 5.x and 4.8 x

  Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
  Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
  Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
  Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
  disabled - click OK
  http://www.avast.com/free-antivirus-download

  Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
  and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
  Finish those you don't use).
  http://www.avast.com/free-antivirus-download#TAB4

  Or use Microsoft Security Essentials - free
  http://www.Microsoft.com/Security_Essentials/

  Prevx works well alongside MSE or Avast

  Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
  programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
  or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  PCmag - Prevx - Editor's choice
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
  would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
  (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
  never find anything of note that I started to use this configuration.

  http://www.Malwarebytes.org/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows mobile 5 stopped loading after the actual weather has been activated the SanQ G28

  My SanQ G28 is not a manual, and for several weeks I tried to find the procedure to hard reset for this phone. Windows has stopped loading and without being charged, I can't access the option clear memory.

  Is there another way to force Windows mobile 5.x to load?

  Thank you very much

  George

  It's everything I could find on the reset.  It is unfortunately quite generic and your phone model is not covered (and I couldn't find any user manuals for it anywhere):http://pocketpccentral.net/help/resetting.htm.

  If this does not help, try to repost in the Windows Mobile forum: http://social.answers.microsoft.com/forums/en-US/windowsmobileactivesync/threads/ where Wiindows Mobile experts may be able to help.  I could find no technical support of the site or forum or basically something useful regarding the device itself - and I spent some time looking.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Having a problem with Windows Live Mail lock up shortly after the start.

  Having a problem with Windows Live Mail lock up shortly after the start. When I start the Task Manager to end the process, it sometimes freezes and the only way to solve the problem is to disconnect which forces the profile to close. Assuming a corrupted profile, I followed the instructions of Windows support to fix a corrupted profile and copied all the files except ntuser.*. When I try to paste them into the new user profile (all profiles are admins), I get the error message asking if I want to leave to proceed. When I click on continue, all THE files in the profile block "corrupt" to the new one, including ntuser.*, that I was not choosing. Why? If the files are rewritten empty? Tried 3 times, same result. Please notify.

  I think I found it! I went in the Windows Live Forum and found a thread that looked like my problem. He suggested going to msconfig and take off Live Mail list start. I couldn't find it on the list, but the top element was "" default EXE"something of an unknown manufacturer. I took it out of the startup list, and Live Mail works again! Thanks for your help!

• The ColdFusion 64-bit windows setup program stops working after recent microsoft update

  ColdFusion 64-bit windows installation stops working after the recent microsoft updates and how I worked around it.

  My question is at the end.

  Deploying coldfusion 9 enterprise 64-bit on a trial version Windows 2003 64 bit what OS with OS data center all updates from MS (at 07/04/2011).

  Measures taken (remember, this is all 64-bit):

  1. the installed the base OS that has been slipstreamed with SP2.

  2 checked w / microsoft and 63 OS updates installed.

  3. launch the exe of the trial CF9.

  4. as soon as the first screen (the one that looks like it's the extraction of files) then finished the second screen (the one that says simply SEE Adobe Coldfusion 9) and the progress bar moves quickly 95% to the right and the installation application closes. No error, no nothing. No log file either.

  5. after a moment of silence disbelief (and a new attempt/reboot, etc.), I started to google. I found nothing. However, I found a post (thanks dspent!) which is useful in what he says how he managed to get a log file of all kinds, first extract the coldfusion_9_WWE_win64.exe file and launch the adobe_cf.exe by hand.  (Snafu Dspent install was different from mine, but his position has been very valuable and started me in the right direction.)

  6. has obtained a copy of the file rarunzipper and extracted from the coldfusion_9_WWE_win64.exe .

  7. in the windows directory created in step 6, I have launched adobe_cf.exe.

  8. the same thing (, the installation application closes. No error, no nothing. Log file No.).

  9. I look at the hs_err_pidxxxx.log file (where the xxxx is a number).

  10. I see inside this file, a disturbing message: 'a fatal error has been detected by the Java Runtime' then ' framework issue ntdll.dll ' , then ' the accident happened outside the Virtual Machine Java to native code ".

  11. OK, now I'm thinking ntdll.dll. Native code! It's like Java tells me that for some reason any, that he can't dance with the operating system.

  12. on a hunch, I decided to test a CF install again on a server with just the installation of SP2 64 W3K3 (ie: skip step 2 above this time).

  13 bingo! That the installation works.

  14. as a result, one of the 63 patches that I had downloaded from MS had triggered a problem with Setup see

  15. back on the first server (with MS installed security patches and that CF installs not on). In the adobe_cf.lax of file CF (one of the files extracted in step 6), there is a line that mentions where the installation gets it is java. Find this file, and check java version Installer uses. It is using 1.6.0_14 - b08.

  16. on the way to the Java website, and there is a newer version of java (1.6.0_24 - b07). Downloaded and installed IT.

  17. change a line in adobe_cf.lax :
  front
  lax.nl.current.vm=resource\\jre\\bin\\java.exe
  After
  Lax.nl.Current.VM=C:\\Program files\\java\\jre6\\bin\\java.exe
  (this assumes that you leave step 16 install to the default location)
  Save the file.

  18. run installation ... * IT WORKS ! *

  Obviously, the built-in java provided with the installation of the CF program is no longer compatible with some changes introduced by a recent update of MS on SP2 64 b. W2K3 platform

  And now comes the interesting part. Although I made the installer to use the new java, it had not incorporated into the generation of CF (ie: in following, you see always c:/coldfusion9/execution/jre AND the java.exe version that is located in this directory is the original version, not the latest version, I forced the installation program to use).

  On the surface, CF looks OK, but I did not test any application yet.

  And finally my
  * QUESTION *.
  Var java.home would be appropriate just to point to the new java directory? I see that the structure of directories and files are not exactly the same (well close) so I am certainly not break things by doing this, but instinct tells me that if the installer beat using the old version, then something else will bring down the road if I do not use the new version. On the other hand, the differences between files and directories is enough that it makes me very nervous with my skill set java limitied to make that decision. 

  Thanks in advance!
  Byron

  Hi Byron,

  Wow great post no doubt much of the information will be useful for those who have Win03 SP2 +. Must say not come across the similar problem on Win08 r2 SP1 +.

  So, to your question. Adobe (http://kb2.adobe.com/cps/894/cpsid_89440.html) security bulletin recommends to run CF8 and CF9 with JVM 1.6.0_24. The bulletin does not say how to do this. I take you installed the JDK and not only JRE 1.6.0_24? After installation of monitoring JDK as follows:

  Stop the CF - stop SERVICES.msc "ColdFusion 9 application server.

  Take a copy of CF\runtime\bin\jvm.config - so you have a backup.

  Change the line CF\runtime\bin\jvm.config find "java.home =" and comment it for example:

  #java.home=C:/ColdFusion9/runtime/jre

  Add the new line like and save next:

  Java.Home = C: / Program Files/Java/jdk1.6.0_24/jre

  Note he slashes and the location of the JRE (runtime): you must point to that of JDK, because the other JRE in C:\Program Files\Java\jre6 will be missing a DLL.

  Start CF via SERVICES.msc.

  HTH, Carl.

• process on the main window to stop running after the closure of a modal dialog box

  Hi everyone, I am new to Oracle Forms so any help would be appreciated.
  
  Here's the scenario: I'm on MY_MODALESS_WINDOW and run a trigger that looks like:
  
  ================================
  execute_trigger ('TRIGGER_1');
  If form_failure then goto FAIL; end if;
  
  show_window ('MY_MODAL_DIALOG');
  synchronize;
  raise form_trigger_failure;
  
  execute_trigger('TRIGGER_2);
  If form_failure then goto FAIL; end if;
  
  < < FAIL > >
  null;
  
  ================================
  
  -No error in compilation.
  -Here is the number: TRIGGER_2 has never been called/executed after the closure of the MY_MODAL_DIALOG?
  
  Thanks again,
  
  Published by: user12216598 on March 12, 2010 09:07

  As I said before, open a modal window does not stop execution of the current procedure. If you need this behavior, put your modal window and all its components in another form module and use CALL_FORM to open this form. Then the execution stops at the CALL_FORM statement and and will continue after the CALL_FORM when you leave the form called.

• MU computer stops immediately after the start-up or attempts repeated; So sometimes minutes after;

  The computer stops immediately after the start, repeatedly or a few minutes after have managed to start it. The error log showed two evenys:

  (1) the service Acquisition of Image Windows (WIA) suspended at startup; (2) the server {81ED811 A1F4E726-8CF1 - 11 D 1-BF92-00600} is not registered with DCOM within the required time.  After restarting the computer, and after installing all of the updates, I installed the last printer; I unplugged the printer and the computer booted immediately!  Does anyone have suggestions, and if I have to update the drivers (hp Laser jet 5 p & hp scanjet 5370C;) How? Please help, frustration to a max; Thank you very much; HeinrichDS

  HeinrichDS

  Recommendation of the Palcouk of sense what is the operating system and is worth a try.  If you're still having problems, then you need to talk to specialists in XP (because it is a Forum for Vista).  In this case, please transfer your question in the Forums of XP to http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Internet connection problem; A few days ago, my computer (Windows 7 OS) stopped connecting to the internet. DNS

  A few days ago, my computer (Windows 7 OS) stopped connecting to the internet. When I troubleshooted, it produces an error of "your computer seems to be configured correctly, but the device or resource (DNS server) does not. I Googled it and tried a lot of things that have been suggested - flushing the DNS, reseting the TCP/IP, etc... None of them worked. At the end of the day, I did a restore of the system to a restore point a few days before starting my computer having these problems and then it started working again. But whenever I have to stop and restart my computer, the problem happens again. Any help as to what could be the problem or how I can fix this problem would be much appreciated!

  You have McAfee? McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.

• All browsers stop working after the automatic updates

  * Original title: Windows 8 - all browsers stop working after update

  Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

  I've updated for Windows 8.1 over the weekend, it seems to work great so far.

• Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

  Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

  I tried to reset firefox and search for similar problems, unfortunately found nothing.

  It is also weird empty space before the address in the address bar

  other extensions and addons seems to work very well.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

  Any difference?

  Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

• I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

  I was forced to upgrade to Windows Live Messenger, but even after the update of XP and the office, I always an OnCatalogResult: error 0x0072ee6

  Hi jcyho,

  Thanks for posting. I have a little trouble understanding your question. If possible you can post back with more detailed information, we can help you with this problem.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.

  Restart mail Windowas

  When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.

  Try to compact and repair the database (see www.oehelp.com/WMUtil/).  There is likely an inconsistency between what is really there and what think the database is where and who must reconcile the two.  So beware of interference from antivirus software which can cause these issues (see www.oehelp.com/OETips.aspx#3).

  Steve

• Windows speech recognition stops randomly with the error: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. »

  Original title: "the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not write. "And the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not be written.

  I have Windows Vista and I use speech recognition Windows, a lot of things. I have used it for years and have really learned to rely on it! Unfortunately, since a recent upgrade of windows installed, Windows speech recognition stops randomly in the middle of using it and it gives me the following error message: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. "And then it stops. When I open it again, it seems to open normally and it will work for varying amounts of time before it does again and I get a different error message.

  I tried to restart and it did not help at all. Please, can someone help me? Please?

  Hi Alicia,.

  1 update you tried to install?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Step 1:

  Check the updates that are installed recently.

  You can view the following link to check the installed updates:

  See the Windows updates are installed

  Step 2:

  You can uninstall these updates and try to install the update one at a time and check for the issue.

  Remove an update

  Method 3:

  You can also try a system restore to a restore point before the updates were installed.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.