Satellite M40-145: Portuguese and European models are different?

We bought 2 M40-145 and 2 Port Replicator III. These products are also compatible to the European and Portuguese Toshiba site. However, it seems that they are not. Can you confirm this? Is it possible that there are errors in the site?

Thank you

José

Hello

I put t know if there is any difference, but anything is possible. The only thing I can tell you is that Satellite M40 cannot be used with any port replicator. Tecra A4 looks like Satellite M40 and it can be used with Port Replicator III.

Visit the site from the bottom of your laptop and you will see that there is no expansion port. Please contact your local dealer. I'm sure they can give you correct information.

Tags: Toshiba

Similar Questions

  • Re: Bluetooth hardware not detected on Satellite M40-145

    Hello

    I recently changed the HD of my Satellite M40-145. I have successfully used the recovery CD, office etc, and now everything seems to work fine... All except the Bluetooth, it is not detected (this laptop has a Bluetooth chip internal). It does not appear on the Device Manager list. I was reading some FAQ in the web of Bluetooth Toshiba and tried to install it again Toshiba Bluetooth Stack but there is still not detected. Any idea?, any solution?

    Thanks in advance for your attention (and I apologize for my bad English)

    If your laptop is preinstalled with original recovery image please activate the BT module (WLAN WIFI switch must be ON, and then use the FN + F8 key combination) and I hope that BT's standard installation starts automatically.

    When you are finished Device Manager check again. The components of BT enabled and installed should appear correctly.

  • Satellite M40-145: CD/DVD player will not play some DVD

    Hello!

    I am the owner of a Satellite M40-145 bought a little over a year; DVD driver worked perfectly until three days ago, but today I discovered something... strange. Still, it reads the DVD business and burned the DVD + r, but apparently it does not read the DVD - r serious more. I tried with different DVD - Rs, I burned the same DVD player, without success; trying to access the DVD gives a message "insert the disk in drive D:".

    In this case, I'm talking about movies on DVD. Please tell me there is a way to fix this without sending the computer to the customer service...
    I wouldn't think he fell down a few days after the expiry date of the guarantee.

    Hello

    Well, you can try to remove the Device Manager order form.
    After restarting again the reader should be recognized again. Then, check if it is possible to read the DVD - R, CD.

    But the question sounds like a lens calibration error. If you use different media, the lens must be calibrated again. But if this procedure fails, the drive is not able to read or write the DVD for example.
    Unfortunately, in this case only the replacement of the drive will resolve this problem.

  • Low beginning on Satellite M40-145 after changing the 160 GB HARD drive

    Hello

    I own a Satellite M40-145 since 2005. After more than two years without any problem, two weeks ago the 80 GB hard drive to the original address has been damaged. So I had to replace it with a new, 160 GB (this replacement was made in a store because it's out of warranty).

    I used successfully on the new HARD drive recovery CD to install Windows XP and all the drivers (just as when it was new).
    I used Partition Magic to create a partition of D for data. Also, I installed Office 2003, Norton 360 and connected to the Internet.
    It worked quickly with only small problems than perhaps with little patience I could fix: as this Bluetooth hardware is not detected and the wireless switch began with the lights off even being in the position we (it worked with new just switching out-lit again). But suddenly, after only one day of use, Windows starts became very slow. It takes about 4-5 minutes until it is possible to use the laptop.

    Now, I tried many possibilities to solve the problem, but always ending on the same problem: I used the recovery CD again and try to use the computer with or without updates (I thought that maybe the problem was due to a bad update), with and without Internet access, etc.
    I also tried in vain the program Microsoft Bootvis to try to speed up the startup, etc.

    I even created an image with Acronis to only with XP and Office running fast, so that I could install it again and try new things.
    I also tried to clean the registry with various programs like CCleaner, TuneUp 2008
    Also the defrag JKDefrag and PageDefrag. But always returning to the same problem after a few days of good conduct.

    I don't know what else I could do. I wonder if maybe the new HD is damaged (although I test and no error or no damage was detected) or if the update BIOS might resolve this problem (I'm not and that's a big risk).

    Please, could someone help me?
    Thank you very much for your attention.
    Pablo

    In my view, that there is nothing wrong with the software or all drivers on you laptop.
    I think the key is the enormous size of the HARD drive.

    The difference between 80 and 160 GB is huge.

    To my knowledge, the BIOS supports a limit on the size of HARD drive and I really wonder why the 160 GB HARD drive has been recognized by the BIOS.

    However, I think you should test a 100 GB, 120 GB HDD if the same question perhaps if poster using a HDD a size smaller.

    Best regards

  • Satellite M40-145: can I install the Satellite M70 another diffétent Bios?

    I have a M40-145 and I need to update my bios to 5.1 using Windows Vista and my computer just Toshiba have 1.7 Bios.
    I can't install 5.1

    Hello

    No, you cannot use the BIOS versions designed for laptops different models!
    This may damage your motherboard for laptop!

    So don t try it!

    But why you want to update the BIOS? You have some problems?

    Thanks for posting more details!

  • Satellite M40-192 - Linux and network

    English (but not perfect ;))):
    First I want to install Suse Linux 10.0 on my new laptop (Toshiba Satellite M40-192), but Installation did not work, and so I had to install linux in text mode. Now, there is another problem with Suse Linux... NETWORK.

    The Lan network is not working well, but the conifguration is right. Is there a will (drivers,...) or 'hope' lost, suse linux 10.0 running on my laptop? This statement, must then appear, I want to buy a laptop.

    I hope that here follow many answers, to solve my problem.

    Thank you!

    Hello Dorfi

    As you know that Linux is not supported by Toshiba and if you want to install it, you're on your own. Unfortunately, I have no much experience with Linux, but try it please visit the Toshiba Linux. You can find it under
    http://www.Linux-laptop.NET/Toshiba.html
    http://Linux.Toshiba-DME.co.jp/Linux/index.htm
    http://newsletter.toshiba-tro.de/main/index.html

    Maybe you'll be lucky if anyone has the same or similar problem.

    Good luck!

  • Satellite M40-145 needs more start after removing the BT to start

    Hello people,

    I am wrinting this post because I think that this version of Bluetooth stack probably has an incompatibility with my toshiba m40 - 145 PSM40E - Windows Xp

    I always remove the Bluetooth Managment (TosBtMng.exe) windows Startup, and now if I do that, I have problems when I'm back from sleep mode. Sometimes, I need to wait more than a minute or two to access the windows. While wainting my monitor stays off and my hard drive is flashing.

    Because I still put TosBtMng.exe to start windows my recovery is ok...

    Do you think this is normal?

    Hey nokai

    Toshiba Bluetooth site and you'll find piles of BT to download
    http://APS.toshiba-tro.de/Bluetooth/

  • Satellite L655 - Wi - Fi and Bluetooth adapters are suddenly disappeared

    In my Satellite L655, both Wi - Fi and Bluetooth adapters are suddenly disappeared. I can t see my Wi - Fi adapter in Device Manager. Also, I can t turn on my Bluetooth.
    Unable to download the new driver LAN wireless (updated 21/04/2011)

    Please help me... I think it's a hardware problem.

    Hmmm... strange.
    What operating system do you use? Are you using the original OS, you got with your laptop?

    As a first step, try to roll back OS to an earlier time using System Restore tool.

    Thanks for posting comments and waiting to see what may be the next step.

  • After I restarted the 2003 server, I get a message on two of my workstations the present on this computer and the network are different

    After you restart the Server 2003 due to a storm, I now get a message on two of my workstations that are different from the current time on this computer and the network

    Hello

    This question would fit better in Windows Server Instances.

  • Time to Smartphones blackBerry and network devices are different - why?

    My time of the device and network are different in a few minutes. My friends BB is different about 1 hour.

    -Why is this?

    -How do I fix this?

    Unit does not automatically refresh its time.

    What are you time settings? Network or BlackBerry?

    While in Date/time settings > Menu > update time and it will update the time according to the network.

  • Satellite M40-129 BSOD and does not start correctly

    Hi again.

    I was working on my computer since my last question, but (almost) nothing has changed.
    The problem:
    My laptop is booting, but only on very rare occasions.
    What can happen:
    -l' screen stays black (almost 50% of cases)
    -L' splash screen (Toshiba - in touch with tomorrow) becomes visible and nothing happens then (40%)
    -Notepad starts "correctly" (10%)

    If the notebook starts correctly there are 2 options:
    1st: I try to start Windows: it crashes with a blue screen with the nice request an update of the BIOS.
    2nd: I boot SuSe Linux: EVERYTHING WORKS!

    I tried to update the BIOS the traditional way, although it is difficult to get it started it runs until shortly before the end and restart the computer.
    I don't see any confirmation screen as Im used to.

    What I assume, that the associated BIOS startup problem.

    I read a method for recovering the BIOS with a floppy disk, where you copy the BIOS. ROM disk and start the computer with the disc.
    My question is: is this also possible with a CD (have no floppy drive), if yes: how to proceed?

    I wanted to give a point of service of Toshiba, but if they can't fix it, I always have to pay 50 euros. I have to pay money to get my BIOS restored, but the service seems to be just a "-delivery service" the real point of service and I would like to speak with a qualified person, first :)

    > I read a method for recovering the BIOS with a floppy disk, where you copy the BIOS. ROM disk and start the computer with the disc.
    > My question is: is it possible with a CD (have no floppy drive), if yes: how to proceed?

    Hmm, you said that you have already received the traditional BIOS files from the ASP in your country. Then maybe you should take a look at this Toshiba document:

    [How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine? | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07]

  • F9H60UA #ABA: what "product range" and the model are my hp laptop?

    Hello

    Sell my HP like new on eBay, I tragically lack the original box or any documentation. I don't know how to fill out some fields on the eBay site:

    1 range. As far as I know it's a HP 15 laptop. Is - this accurate enough? How could I know if it is a Pavilion, VAIO, Presario, etc.. ? There is no external marks.

    2 model. Stumped on this one completely. He will have to leave the field blank unless you have a way for me to look it up.

    3 Edition operating system. I know I have Windows 8.1. How will I know if it is Home Premium, professional or other?

    4. type of graphics processing. I know that I have an AMD E-Series processor. This would be dedicated, integrated / edge or hybrid?

    Thanks for any help you might be. If there is no way you can provide answers from the information I have provided, I just leave the fields blank and the wing.

    See you soon,.

    Bruce

    Hello

    Please use the following specifications:

    http://support.HP.com/us-en/document/c04051951

    It's a plain 15 HP, no other line. Its model name: HP 15-g019wm. It comes with 8.1 Windows 64-bit (standard version).

    It is a low-end, inexpensive machine.

    Concerning

  • Satellite M40-145 - DVD recording speed

    My DVD - RW is not more 2.4 x burning speed. I tried with several brands of DVD - R / + R, Matsu update * a driver, software to record firmware reinstalled (Nero 6 and 7) but the problem is.
    What should you do?

    Hello

    I found some info on this drive.
    It burn the DVD - R 8 x
    DVD - RW 4 x
    DVD + R 8 x
    DVD + R (DL) 2 x 4
    DVD + RW 4 x
    DVD - RAM 3 x

    You have used either a DVD DL or the software recognizes the DVD as a media double layer.

  • Satellite M40 frozen keyboard - and touchpad frozen

    Hello

    I don't know what's wrong with this laptop, but I got it for a few months and the touchpad has frozen, sent to fix she came back and worked for 24 hours and froze. Could not have another 2 days to get collected and filed so now use an external mouse. 2 days ago the keyboard froze and doesn't work, then it works again for an hour or two the next night and has frozen - no key has nothing, even function keys. It seems to work when the machine is cold.

    What is this connected to the touchpad frozen?

    Anyone know why this is happening?

    Thank you

    Hello

    It seems that this happens if the laptop heats up. He of right?
    Well, you can try to pick you up BONES and check that the issue occurs if the OS is clearly installed.
    If the operating system helps recovery doesn t, it seems that it s something wrong with the hardware.
    In this case your laptop needs a service :(

    Good bye

  • First slide and following slides are different sizes at the launch of the server web file .swf

    We use CP5.5, and a .cptx file has been published in .swf. When played locally, he plays very well. However, during the launch of our server web, the first slide is displayed correctly, but all the following slides are huge on the screen and playback controls and half of the screen are not available. I tried to copy all the slides in a new project and publication, same problem. I also deleted on all ppt slides and not republished, no chance. I can resize the project but the difference in size of screen between the first slide and remains of slides, even when I delete the first slide is displayed differently. When I erase it, the first new slide has the problem. Again, the issue is seen only when the .swf is launched from our web server.

    Are there widgets on these first slides?

    You mention that you launch the SWF from your Web site.  He launched you via the HTM files and JS Captivate also publishes?

Maybe you are looking for

  • Key WPA - EAP business Wifi for OSX 10.11?

    I'm looking for months for a Wifi key that supports OSX 10.11 WPA - EAP Enterprise. I ordered about 10 already, but most of them only support OSX 10.9 or lower. But I need 10.11. Those who work with OSX only sustained 10.11 until this WPA - PSK. Any

  • NI9215 Failure Modes

  • HP2000-2d19WM: System disabled [63727402]

    Unknown admin password.

  • Windows Movie Maker, not able to post the video

    I have a problem with the publication in 23 minutes of video! I have the same problem with Windows Movie Maker with the same the same reasons. I check everything to make sure that the files are not corrupt or missing, I check that the destination fol

  • does not scan the HP deskjet1515

    Hello I was I scan a document with my HP deskjet1515, when someone mistakingly took out the cable. When I connected the cable, I got this error message: -. "The series HP Deskjet 1510 is not found" in a dialog box with "HP Scan" in the header dialog