Satellite M40x 129 No. by download drivers

Similar Questions

• Error and warning before and after the POST - Satellite M40X 129

  Hello

  I use a Satellite M40X-129, bought in 2005.
  After you have reinstalled Windows and all the necessary drivers (after more than 3 years, which was the longest time I used a windows ;-)) installation this afternoon, I meet the following situation when starting):

  (... check and all the stuff of ram...)
  Updated System Configuration data
  ERROR
  0271: check date and time
  WARNING
  0251: System CMOS checksum bad - default configuration used
  Press to resume, installation

  When I press F1 to resume, windows starts very well as I'm used to it.
  I can also access the configuration and need to update the time setting.

  Two scenarios:
  (a) the startup, shutdown, reboot: error message happen
  (b) setting the time, out of the bios with save the configuration, boot, very well until the stop/restart is required

  I tried to download the update of the bios to v1.60, but the configuration tool told me that this version is already in use and it will not progress.

  What I wondered: why is it happening? I don't think that the battery power is low, which was suggested to others in other threads, because it happened just after I installed the chipset/utils and other drivers from the toshiba download page.

  What can I do?

  -Bios update? -> Where can I find a new version? A tool (which I downloaded from a site linked to Phoenix Technologies) told me, there is an update for my Bios, but he wants me to join a subscription $29.99 / year

  -Swap CMOS battery? -> how remove m40x-129, tutorials? Don't want no f * ck it upwards...

  any other advice?

  Thanks for your help.
  Best regards

  Hello

  I think that the CMOS battery may be empty and therefore both a given in the BIOS is always changing the default value.

  Usually, you should be able to recharge this battery CMOS very easily.
  The user manual describes how to load this. Take a look at your manual

  As I m not wrong not the laptop must be ON and running and must be connected to the mains for more than 20hours.
  Then, the notebooks BIOS battery needs to be recharged again.

  Check it out!

  Good bye

• Power adapter for Toshiba Satellite M40X 129

  Hello guys,.
  hope this is the right forum to post my question in:

  I have a Toshiba Satellite M40X 129 (model No.: PSM4XE-01600CGR). My adapter is buggered so I need to get a new one. Bought the machine in Germany, now am in Tasmania / Australia. Being in a camp of the Valley remote until April, I won´t be able to go into a store with my laptop to try and understand, that the AC adapter / CC is suitable. We have internet here as our only communication, it is very important for me that sort.

  Can someone tell me, what type of adapter / power supply is planned or where to look?

  The one I ve been before is a LITEON, part No.: PA3432U-1AC3, model n °: PA-1750-09, input: 100-240V, 50-60 Hz, 1. 5 a, output: 19V, 3. 95 a.

  Thanks for your help and have a nice day
  Peter

  Adapters for your Satellite are:
  PA3432U-1ACA
  PA3432U-1AC3
  PA3432C-1AC3.

  Put this number in Google and you will find very precise specifications.

  By the way: If you already have the old adapter specifications I put t understand why you need some additional info. If there is no possibility to buy again until April, how do you get a new one?
  Sorry, but I m confused.

• Satellite M40x-129: how re-activating touchpad before you connect

  Hello.
  It seems that the function (Fn + F9) to activate the touchpad does not work before opening a session on windows.

  I use the original utility on my m40x 129.

  Hi locus

  As far as I know all the tools and services are active after full OS start and FN + F9 will not work before the registration of the user.

• Satellite M40X-129: fans works with a maximum return on Vista

  Hello

  I have the laptop M40X 129 for 2 years and am very satisfied in this regard.
  But since the last few weeks, I have problems with the cooler.
  If I use a 3d task in the lower first 45, that the system works without any problem.
  But his is warming a heater and cooler will then maximum (you can hear it).

  From this moment, the system becomes very slow. I run the system with the highest maximum power and use windows vista professional.
  The laptop feels too hot on the underside (ram?).

  Is it possible to run the cooler from the start at a higher level, for example in the bios or in windows (some options?)?

  I hope you can help me,
  Flo

  Hi Flo

  Usually, there is nothing wrong with your laptop. If the internal temperature rises to a higher level, the cooling modules have to perform with maximum efficiency to lower the temperature!
  While the temperature is high the graphic driver Toshiba decrease the performance of the graphics card in order to avoid a temperature rise.
  That is why the laptop could run slowly!

  What you could do is check the cooling fans and if necessary try to clean with a compressed air jet professional. These aerosols can be purchased from the merchant to the computer.

  However, please note that the installed Vista is in need of more computer resources as the beginning s MS Windows operating system. All devices like CPU and GPU with superior performance and so the temperature is higher with Vista as using other Windows OS such as XP.

  Good bye

• Satellite B-C55-1055 - cannot download drivers Win 7 - links do not work

  Hello

  I try a lot of time to download the drivers from the toshiba site
  but all of the links is broken all links collapsed after 50%
  I try to start it again the same problem

  Help, please

  On the page of the Toshiba UE driver
  http://www.Toshiba.EU/innovation/download_drivers_bios.jsp

  I chose EV:
  Laptop
  Satellite
  Satellite C series
  C55 - B satellite
  All the
  Windows 7 64 bit

  and I was able to download most of the drivers I have tried all the drivers (69) possible, tools and utilities, but the links I tried worked properly.

• Re: Satellite L300-129 - where to download the display driver?

  I want to reinstall Vista (because I have so much...). And before you start, I began the research for my new/old operating system drivers. I mark for my first driver, graphics driver. good. I'm going to the Intel site and ran "Detector pilot" and look what I saw.

  http://img255.imageshack.us/img255/6370/beztytuuev.PNG

  And then I went to the Toshiba Support. I spent the time to find where I can download the driver-_-. Too bad.
  And I want to go to my model annd... I can not find my driver. (. It is very important for me.

  http://img101.imageshack.us/img101/2764/beztytuuym.jpg

  Hello

  Try this driver for Windows Vista 32-bit:

  http://Support1.toshiba-tro.de/Tedd-files2/0/display-20080416133556.zip

  or Windows Vista 64-bit: (actually for windows 7, but it should work)

  http://Support1.toshiba-tro.de/Tedd-files2/0/display-20091027142619.zip

  Post edited by: jeka-Israel

• Satellite M40X-129: where is the second RAM?

  Hello

  I have a problem with my laptop. Since I closed it last time when the battery was empty I can´t start Notepad again. I'm getting a signal from the BIOS. 1-3-3-1 is the beep code. So, I think, I have an error with either of my two 512MB - RAM.

  Yesterday I opened the hood of the laptop at the undersite and removed the 512 MB of RAM. Then I tested the laptop again - but the beep code is the same.

  Today, as I searched the second 512 MB of RAM under the keyboard, but I didn t found the second RAM.

  Can someone tell me how I can reach the second 512 MB of RAM?

  Thank you very much for your help!

  Martin

  Hello

  a friend of mine has a similar machine and we exchanged the two modules. If you have no warranty on that then it s no problem machine to do what I say to you:
  Right you´re the second RAM is under the keyboard, but after removing the keyboard, unscrew a small cover that appears after lifting the keyboard. This bit of cover and the second RAM will appear.

  Good luck

• How to clean fans on Satellite M40X 129

  How to clean equipment, ventilation of the cooling system is dirty and if quickly overheat, it is allowed and possible and how do I open the case? If I do this, is that mean that I broke the seals and have no warranty/guarantee of Toshiba?

  Hello

  Yes it s true. If you open the Notepad or remove the lids to clean the fans on the inside you will lose the warranty.
  I clean my device with vacuum fans. This is a very simple procedure and I don t need open Notepad.
  But if you try this, so please be careful.

• M40X-129: the two usb ports on the right does not work

  Hello people.

  Two days ago, I bought a satellite m40x-129. I wanted to use a usb mouse and a drive hard usb so I had to plug the device into a a usbport on the right side of the laptop, but is does not work.
  even after reinstalling with windows xp pro (I need to connect to a primary domain controller) has not changed. I installed all the drivers of the tool-cd burned by a toshiba tool in the original installation.
  Maybe it's a hardware fault. someone else has the same problem?

  Thanks, jens

  today I updated my drivers for the new 7 series chipset from intel, but the usb ports on the right still have no power and do not recognize any device.
  I'll ge see my local dealer Monday ;)

• Satellite M40x - where the memory?

  Hi all

  I want to improve my memory of 512 MB to 1.5 GB. I bought 1 G RAM and when I plugged in the screen become white and computer laptop does not work. RAM is fine. I have contact the technical service of the seller, and according to them I need to remove the old 512 MB of RAM and plugged it my 1 GB of RAM for my laptop recognize the new RAM.

  To do this, I opened my keboard and under what I can only find WLAN in the middle in the left there is another local network. and the far left, I see my DVD - ROM. On the right PC card and what is - this. I don't know where is the 512 MB RAM slot. It is there somewhere.

  Is there any expert who can tell me where to find 512 MB RAM slot?

  PS: I even call Toshiba support and they said sorry according to policy, we cannot tell you.
  If expert laymen captions please help me to solve this problem.

  Please

  I checked the manual of the Satellite M40x (it can be downloaded from the Toshiba site) and if you look at page 8-7 you can find a description of the memory upgrade.

  In my opinion the 512 MB that you already is a built-in RAM that can t be upgraded because the bottom of the laptop is on only one memory slot.

  However, I think that it is not a problem to use an additional RAM module, but maybe the new RAM is not compatible with your laptop.
  What type of memory you have bought exactly? Maybe you should try it with another.

  I hope I could help a bit.

• How to install Cardbusdriver-Card reader on Satellite M40x?

  Hi all
  I have laptop Satellite M40X-112.
  I downloaded the cardbusdriver reader of card on the Toshiba site.
  So my question is how to install it, I mean what file I have to click to start the installation.

  Thanks in advance.
  BVP

  Have you ever tried with setup.exe?

• Re: Need drivers for Satellite M40x

  Hello

  I have a big problem... I can't find drivers for my Toshiba Satellite M40x 267 (PSM4XE-03401UFR).
  Please I need these drivers (for all... mother board driver etc. and especially for the display).

  Thank you, if it's possible a mail to [email protected]

  All the drivers, you can find on Toshiba download page under http://eu.computers.toshiba-europe.com > support & downloads but under "Product Type" choose ARCHIVE.

  That's all!
  Good bye

• Satellite M40x-189 - what I need to install the drivers/utilities?

  Dear all,

  Satellite m40x-189

  RELOADED Windows XP, but did not find the Toshiba Utilities and drivers disk that had to come with the lappy, not much works and in Device Manager there are a load of devices with yellow alerts.

  The internal wireless is not predictable or is a wireless card that is inserted in the housing of PCMI extension on the side.
  These are just the first things I noticed were not available. Need wireless for internet access to register Windies.

  I don't know what drivers/utilities, I need to download and install from Toshiba download drivers web site.

  Y at - it something like a list or instructions anywhere that details what drivers/utilities are required to make all the "bits" are working on a new laptop loaded Windows. ?

  Any help would be invaluable.

  Best regards

  Mark

  Hello

  All the drivers are located on the European driver Toshiba page.
  The laptop model is mentioned on the label located on the bottom of the unit.
  Choose the right laptop and install all the drivers/tools on the page of Toshiba.

  The M40x is a bit older so search the Archives of the driver page!

  PS: you can see some details on the pilots or the tool in addition to information. He of always right!

• Cannot download drivers satellite L50 - B1378 (PSKTNV)-

  Hello

  I am trying to download drivers display for Satellite L50-B1378 (reference PSKTNV) at the bottom of the link,
  LINK: http://www.toshibamea.com/en/download-files
  I am able to get good results, but there is no link to download the files. This is just to show the screen without any link Hypertext/possibility to download the driver file. I've attached a screenshot of the result page.

  Can we steer or provide the link to the latest display driver for this model.

  Thank you
  K

  try to download the drivers directly from the Toshiba UE driver page:
  http://www.Toshiba.EU/innovation/Dow...ivers_bios.jsp

  The download should work fine.