Satellite M40X-129: where is the second RAM?

Hello

I have a problem with my laptop. Since I closed it last time when the battery was empty I can´t start Notepad again. I'm getting a signal from the BIOS. 1-3-3-1 is the beep code. So, I think, I have an error with either of my two 512MB - RAM.

Yesterday I opened the hood of the laptop at the undersite and removed the 512 MB of RAM. Then I tested the laptop again - but the beep code is the same.

Today, as I searched the second 512 MB of RAM under the keyboard, but I didn t found the second RAM.

Can someone tell me how I can reach the second 512 MB of RAM?

Thank you very much for your help!

Martin

Hello

a friend of mine has a similar machine and we exchanged the two modules. If you have no warranty on that then it s no problem machine to do what I say to you:
Right you´re the second RAM is under the keyboard, but after removing the keyboard, unscrew a small cover that appears after lifting the keyboard. This bit of cover and the second RAM will appear.

Good luck

Tags: Toshiba

Similar Questions

  • Error and warning before and after the POST - Satellite M40X 129

    Hello

    I use a Satellite M40X-129, bought in 2005.
    After you have reinstalled Windows and all the necessary drivers (after more than 3 years, which was the longest time I used a windows ;-)) installation this afternoon, I meet the following situation when starting):

    (... check and all the stuff of ram...)
    Updated System Configuration data
    ERROR
    0271: check date and time
    WARNING
    0251: System CMOS checksum bad - default configuration used
    Press to resume, installation

    When I press F1 to resume, windows starts very well as I'm used to it.
    I can also access the configuration and need to update the time setting.

    Two scenarios:
    (a) the startup, shutdown, reboot: error message happen
    (b) setting the time, out of the bios with save the configuration, boot, very well until the stop/restart is required

    I tried to download the update of the bios to v1.60, but the configuration tool told me that this version is already in use and it will not progress.

    What I wondered: why is it happening? I don't think that the battery power is low, which was suggested to others in other threads, because it happened just after I installed the chipset/utils and other drivers from the toshiba download page.

    What can I do?

    -Bios update? -> Where can I find a new version? A tool (which I downloaded from a site linked to Phoenix Technologies) told me, there is an update for my Bios, but he wants me to join a subscription $29.99 / year

    -Swap CMOS battery? -> how remove m40x-129, tutorials? Don't want no f * ck it upwards...

    any other advice?

    Thanks for your help.
    Best regards

    Hello

    I think that the CMOS battery may be empty and therefore both a given in the BIOS is always changing the default value.

    Usually, you should be able to recharge this battery CMOS very easily.
    The user manual describes how to load this. Take a look at your manual

    As I m not wrong not the laptop must be ON and running and must be connected to the mains for more than 20hours.
    Then, the notebooks BIOS battery needs to be recharged again.

    Check it out!

    Good bye

  • Power adapter for Toshiba Satellite M40X 129

    Hello guys,.
    hope this is the right forum to post my question in:

    I have a Toshiba Satellite M40X 129 (model No.: PSM4XE-01600CGR). My adapter is buggered so I need to get a new one. Bought the machine in Germany, now am in Tasmania / Australia. Being in a camp of the Valley remote until April, I won´t be able to go into a store with my laptop to try and understand, that the AC adapter / CC is suitable. We have internet here as our only communication, it is very important for me that sort.

    Can someone tell me, what type of adapter / power supply is planned or where to look?

    The one I ve been before is a LITEON, part No.: PA3432U-1AC3, model n °: PA-1750-09, input: 100-240V, 50-60 Hz, 1. 5 a, output: 19V, 3. 95 a.

    Thanks for your help and have a nice day
    Peter

    Adapters for your Satellite are:
    PA3432U-1ACA
    PA3432U-1AC3
    PA3432C-1AC3.

    Put this number in Google and you will find very precise specifications.

    By the way: If you already have the old adapter specifications I put t understand why you need some additional info. If there is no possibility to buy again until April, how do you get a new one?
    Sorry, but I m confused.

  • Where is the second slot of RAM on Satellite M100-165?

    Hello

    Sorry in advance for my English :)

    I have Toshiba M100-165 (PSMA1E-01W00PG3) and you want to upgrade memory RAM. But I see just a free memory slot on the bottom of my laptop. According to the manual and specifications of the laptop, there should be two slots. Where is the other? There for you, and how can I access it?

    I will be grateful for the answer.

    You are right. There are two locations of memory, but only one is user expandable!
    In my view, the other is placed somewhere under the keyboard.

    But like I said it's only one scalable user. So, if you open the laptop to access the second slot, you will lose the warranty.
    It is therefore advisable to ask and ASP technician to upgrade memory on the second slot.

    Best regards

  • Satellite M40x-148: where can I get the recovery disk

    I need a recovery CD for my satellite m40x 148.
    Is there someone who could help?

    Were make a copy?

    A big thank you to anyone with a solution

    Hello

    Why you n t service provider contact allowed the closest? They should be able to order a new disc of recovery for you.
    Maybe they have one in stock and you directly if you buy a coffee or ;)

    Here you can find the nearest authorized service provider:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • The second RAM slot is available on my Satellite L30-10 x (PSL33E)?

    I'm not sure if there is or not a free location for RAM on my computer that I can add to the current 1 GB is 2 512 MB or it is right 1 GB in a slot and there is a free slot.
    Can anyone help?

    Thank you.

    Your laptop satellite can handle with 2 GB of RAM max and two slots are available. Memory slot is placed on the side down in the middle.
    Remove it and see how many RAM slots is there.

  • Satellite Pro 4280: where can I buy RAM?

    can someone help me by telling me where I can buy ram for my laptop please

    Hello

    You can upgrade the Satellite Pro 4280 memory to a maximum of 320 MB
    These modules of memory are supported.

    PA3006U 256 MB
    64 MB PA3004U
    128 MB PA3005U
    PA3003U 32 MB

    You can order these service modules to Toshiba in your country or try you to google for this part numbers in the web. I m you will find a variety of the garage who sell these modules.

  • C55-A-1MW satellite does not start with the new RAM inserted

    Hey.

    I hope to find someone who can help me... I bought ram memories and tried 4 different memories in my C55 A 1MW Satellite. But each card RAM I have insert makes the computer cannot start... It lights just to stop again.

    Is there a compatibility issue or anything like that? I used 2 different aData Ram extensions cars, 1 1 and 4 GB 2 GB. the 4 GB card was 1333 mhz and was 2 GB 1600 mhz card. and I tried 2 corsair 4 GB 1600 mhz different cards.

    Is this something that makes only able to expand RAM with Toshibas own memories or is the second cardslot for broken RAM memory?

    As I see you use RAM modules with different specifications. Your problem is certainly of RAM compatibility and you must use the RAM modules with the same specifications.
    According to specification of laptop there are 4 slots of memory and laptop can handle up to 32 GB of RAM.

    The compatible RAM modules are:
    4 GB DDR3L-1600-PA5104U-1M4G
    8 GB DDR3L-1600-PA5104U-1M8G

    Of course, you can use modules from other manufacturers, but please do not use some cheap products. I can recommend the use of Kingston memory modules.

  • Satellite M40X-129: fans works with a maximum return on Vista

    Hello

    I have the laptop M40X 129 for 2 years and am very satisfied in this regard.
    But since the last few weeks, I have problems with the cooler.
    If I use a 3d task in the lower first 45, that the system works without any problem.
    But his is warming a heater and cooler will then maximum (you can hear it).

    From this moment, the system becomes very slow. I run the system with the highest maximum power and use windows vista professional.
    The laptop feels too hot on the underside (ram?).

    Is it possible to run the cooler from the start at a higher level, for example in the bios or in windows (some options?)?

    I hope you can help me,
    Flo

    Hi Flo

    Usually, there is nothing wrong with your laptop. If the internal temperature rises to a higher level, the cooling modules have to perform with maximum efficiency to lower the temperature!
    While the temperature is high the graphic driver Toshiba decrease the performance of the graphics card in order to avoid a temperature rise.
    That is why the laptop could run slowly!

    What you could do is check the cooling fans and if necessary try to clean with a compressed air jet professional. These aerosols can be purchased from the merchant to the computer.

    However, please note that the installed Vista is in need of more computer resources as the beginning s MS Windows operating system. All devices like CPU and GPU with superior performance and so the temperature is higher with Vista as using other Windows OS such as XP.

    Good bye

  • Satellite M40X-149: where a memory module?

    Hello

    I have a satellite M40X-149. I believe that my laptop has a faulty memory - gel randomly, sometimes will not start sound cmos etc. However when I opened the plastic lid it seems to be an empty memory slot. Assume that the memory is either on board or possibly under the keyboard as in some other models of Toshiba.

    Could someone tell me first where it is and also if it can be replaced. If it cannot be replaced, is it possible to disable it and use the empty accommodation?

    The machine is out of warranty so take it apart is not a problem

    Thanks in advance
    KeV

    Hello

    Yes, you are right. The laptop supports 2 locations in memory, but only one is scalable user.
    This means that the other is hidden somewhere under the keyboard!
    But if you remove the keyboard or any parts, you will lose the warranty.
    Therefore the slot is called scalable user because the common user could insert the module without having to open Notepad.

    The laptop can be upgraded up to 2048 MB. If one slot can candle 1024Mo!

  • Satellite P70 - how to use the second HARD drive?

    I have recently bought a satellite P70 - A - 10 d.

    I see that there is no second location on hard disk, so I can install a second disk.
    You can see the second slot in this video http://www.youtube.com/watch?v=uW75IsuFeoY.

    But I can't understand how screed the disc.
    Do I need additional items for it or he'll be safe just plug the drive and leave it without screws?

    Hello

    If the second HARD drive bay contains the HARD drive connector, you can connect the HARD drive using the 2.5 HARD disk as [this | http://www.newmodeus.com/shop/images/TOS-X505%20sm.jpg] a

    Welcome them

  • Satellite L10 281: what is the maximum RAM

    Hi Forum,

    I had a Satellite L10 281 opportunity just before Christmas. I'm very happy with it.

    He has 256 MB of RAM onboard.

    Is 2 x 512 MB modules the maximum RAM for this computer?

    Thanks in advance,

    Dan

    The L10 281 isn't bad. It's a nice book for simply and commonly used.
    Computer laptop support max 1024 MB of memory (2 x 512 MB) and you can use 256 MB (PA3311U - 1 M 25) and the modules memory 512 MB (PA3312U - 1 M 51).

    Greetings

  • Re: Satellite U500 - 18K - where is the bag and the driver on the CD?

    I just bought this laptop yesterday and when I read the manual book its has said that the package includes the bag and the driver on the CD but I had none of them, only the laptop and the power cable.

    When I ask the man to store, he says, it's all... no other. Where can I ask questions about it? Or is it a common thing?

    Hello

    Can you please tell us what page you found this information? This does not to me you get a bag and the driver on the CD with Notepad.
    Can also explain what you mean with CD driver?

    I checked the manual of my Satellite U500 and it shows the following information about the material delivered in package:
    + Toshiba Satellite U500 laptop PC +.
    + Universal AC adapter power cord + and
    + Battery (is preinstalled on the computer).
    + Cleaning cloth (is included with some models).

    So I didn t find any information on the things you want to say

  • Satellite M40x-149 - icons on the bigger apeared office

    Hi there, hope someone can help me.

    I booted up my laptop today and the icons on the desktop appears larger. I have a click with the right button on the desktop then went properties SETTINGS and noticed that the highest resolution I could get is 1024 x 768, but when I checked the specifications of my computer online, I found that should be by as high as 1280 x 800.

    My laptop is a satellite M40x-149. The cursor goes down to 800 x 600 to 1024 x 768 there is no inbetween.
    I tried restoring the system, but in vain.

    Help please

    Hello

    This looks like the display driver needs to be updated. Please see the Toshiba page for an update:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Before installing the latest version, you must remove the old one. Then restart the laptop and now to install the most recent version.

    Normally if the display driver is installed correctly, you should be able to choose the higher screen resolution.

  • Satellite M40x-129: how re-activating touchpad before you connect

    Hello.
    It seems that the function (Fn + F9) to activate the touchpad does not work before opening a session on windows.

    I use the original utility on my m40x 129.

    Hi locus

    As far as I know all the tools and services are active after full OS start and FN + F9 will not work before the registration of the user.

Maybe you are looking for