Satellite M45 hangs after startup

Hi people,

I got by Satellite M45 and it's almost 3 years, I use it. Now he started to gel after starting. So I formatted using the recovery DVDs, even now he kick survey and if I click on the start menu it freezes.

Someone has this kind of situation? Is this hard drive problem? What would be the best solution to do this, change the HD, RAM?.

Thanks in advance.



> Is this hard drive problem? What would be the best solution to do this, change the HD, RAM?.

You must understand that no one will be able to say exactly what's wrong.
Several tests are needed to find the fault.

If you reinstalled the operating system on the HARD drive and then I n t think that the HARD drive would be malfunctions.
I had a similar problem on my 6 year old laptop. Laptop computer frisotté after 2 min.
After a long investigation, I discovered that one of the memory slots would be defective, because the two modules worked correctly in another location.

Of course, in your case, it could be a failure of memory but it's only a suggestion or suspicion. You know

Tags: Toshiba

Similar Questions

  • Satellite A500 - hangs after startup

    My A500 is about 18 months old and just recently, it has started to freeze within 5 minutes of commissioning. It runs in safe mode for as long as I want. I run PC - Doctor drive external HARD in this mode and found no problem.

    Next, I'd like to try is restore back to the factory of the hidden partition settings, I know how to do. Before I do that I have a few questions please.

    1A everyone has had this problem and solved?
    2. is my computer likely to freeze during the re-instillation of the system and get stuck in some kind of loop to instillation or turn into a brick.

    Any comments would be much appreciated.

    Thank you

    Running Windows 7 32bit.* *.


    > It runs in safe mode for as long as I want.
    That would mean he s a software problem or driver and reinstalling Windows using disk HARD recovery would help to get rid of it.

    No doubt someone else has solved the problem, but don t forget that different people using different software/drivers, so no one can tell you exactly what is causing the problem. With the installation of recovery you do nothing wrong because it will restore the settings prétestées from Toshiba.

    An accurate description on the recovery of HARD drive, you can find here:

  • My Disk Defragmenter Hangs After startup

    My Disk Defragmenter Hangs After startup.  I tried to use the microsoft fix it Center automatic troobleshooter for the maintenance of the system determine the cause and got an error code 0 x 80040154.  He only "worked" on windows update and the update to fix issue still exists.  I'm trying to find out what means error 0 x 80040154 and how to solve the problem.

    Hope that gives you enough information.


    (1) operating system do you work?

    (2) which Fix - it applied?

    (3) what is the exact full error message?

    Try the following methods and check the status of the issue.

    Method 1:

    Run a scan of the file system checker and check if it helps.

    Method 2:

    Check a drive for errors.

    NOTE: This task might cause loss of data on your computer. It is recommended that you back up all data and files before performing this.

  • macOS Sierra hangs after startup

    I have a macbook pro 15 inch mid 2014 retina

    After that I installed macos sierra my macbook freezes after startup for about 10 min before things become normal after shots completely from the OS, I tried the P + R command cmd startup items cleaning + option and I checked the ram which is normal usage, but none of the above has worked

    It seems that this problem also affects slightly the time of normal startup of windows on one present on my bootcamp


    Disconnect all external devices

    Restart in safe mode

    Try safe mode if your Mac does not end commissioning - Apple Support

    then restart normally, yet disconnected devices.

    If the problem persists, you can view a report of etreceheck for later analysis

  • hangs after startup

    Dell Studio laptop computer with Windows Vista Home Premium.  Whenever I bootup, & it gets the main office, the computer hangs after about 1 minute.  If I log in safe mode it freezes after about 3 minutes.  And if I connect normally or in safe mode the box PROPERTIES of the SYSTEM (the one w/computer name, hardware, advanced, remote tabs) always appears. Help please.


    Run diagnostic Dell builtin software:

    And if that gives you advice on what is the problem, contact Dell or you could ask their Support Forums:

    See you soon.

  • Satellite 2140CDS hang at startup

    The model is a Satellite of 2140CDS with an upgrade of RAM (made at the beginning of 2003) to the maximum capacity of 168 Mb.

    The Windows 98 Second edition has been upgraded to Windows 2000 SR4 and is stable and without significant problems for more than 24 months.

    Last week the following occurred: while in the Win2k startup the computer crashes just after appearing the wallpaper and the arrow of the mouse, which is possible to move for about 5 seconds before the total disconnection. The desktop icons never appear and the Windows taskbar or.

    Trying to figure out if it was a default operating system error, a virus or a HARD drive I did the following:
    (1) tried to start with 2 Linux liveCD distributions ("Feather Linux" and "Knoppix 3.6"), but both hang up after the acmp loading drivers.

    (2) the HARD drive has been subscribed and a vast CHKDSK and VirusScan has been conducted, not meeting any damage or virus (test was made to mount the HARD drive in a case of USB 2.0 on' mobile' external data storage and the tests done in a desktop PC).

    (3) after the tests and re-Assembly of the HARD disk in the 2140CDS, the system would produce the same hang up to the 'office loading phase.

    (4) a new drive was purchased, external formatted in FAT32 and when trying to install Windows 98SE, installation hang just after the initial system tests and reading the HARD disk capacity (the phrase "Windows Setup requires 7340032 bytes availalable your sys ' is usually interrupted like this, or just after the word"available").

    (5) using a BACK boot disk with CD-ROM support appears to be stable, but the number and type of operations performed from the disk of the book were not many or too complex.

    (5) when disconnection occurs, the only way to restart is through the reset button or the button stop (Ctr Alt Del does not work). The CD Rom drive stops responding also (door does not open).

    (6) thinking about the possibility of a corrupted BIOS Advanced Power Managent or damage, I flashed the BIOS with the 'CHGBIOSA' of the Toshiba utility (same version that it has been installed in the laptop computer: ACPI BIOS version 7.50), but the problem persisted.

    As you can see, I ask for advice, because there have been quite some "basic stuff" I tried already, and as my "repertoire" of tips ends, I have no option then to ask your advice.
    Will be looking forward to hear from you.
    Thak you.

    Hi Luis,.

    Nice detailed explanation!

    What is Mode safe? Have you tested it?
    (Presig F8 key when W2k is startig up)

    You connect with a user or did the Windows boot directly on the desktop at boot?

    When you work with users, try to log on as another user and wait for what takes place? If you have no installed user profiles, try Safe Mode and create a new one!

    When safe mode or another user is connected and the office is responsible, the maintenance needs to be done.

    Try this and keep me posted!

    Pete Bye

  • Satellite A100 hangs after hibernation / suspension


    I have a new A100 with Vista installed. Everything works fine, but there are two REALLY boring problems.

    1. after the suspension or wintering, Vista often hangs when you try to connect to internet/network. I know it's a question that I've seen other people writing similar things on other sites. Y at - it a cure?

    2. When blocking down after using the net, I am often a message that Adobe Reader has a lot of open pages and I can't stop.

    Thanks for your time.


    Vista often hangs when you try to connect to internet/network
    (1.) you want to tell the WLan or LAN?
    It's not easy to offer the solution in this case believe me Dimitri. Test and Binder are what you could do, what version of BIOS do you use? Check if the new version is available on the Toshiba page. Sometimes, the update of the BIOS might help.
    Further, you can try to disable the option in energy-saving Wlan/Lan Card properties and try to update the drivers.

    2.) this only happens on my laptop 2 different. But I don t use the Vista but XP.
    From time to time I m not able to stop because a message appears saying: Adobe acrobat reader runs in the background and can not close.
    In this case, you can try to reinstall the software Adobe reader and try to clean the registry with an application of part 3.
    Additional you may stop loading the acrobat reader at the beginning. Simply remove the entry from the registry RUN acrobat reader

  • AE CC 2014.2 hangs AFTER startup - crash accident MSVCR110.dll module

    Since yesterday morning (Wednesday 4 Feb 15) AE CC 2014.2 hangs shortly after it starts.

    Projects can be opened and images that may be imported or played inside a mockup, but a few seconds explore warns of the same lack of accident every time.

    Ideas, ideas or solutions would be greatly appreciated in this time - Jonathan S.

    Signature of the problem:

    Problem event name: APPCRASH

    Application name: AfterFX.exe

    Application version:

    Application timestamp: 54816501

    Fault Module name: MSVCR110.dll

    Fault Module Version: 11.0.51106.1

    Timestamp of Module error: 5098826e

    Exception code: 40000015

    Exception offset: 00000000000740da

    OS version: 6.1.7601.

    Locale ID: 2057

    Additional information 1: 3b7c

    More information 2: 3b7c1a01106e59da7831bf551db78835

    Additional information 3: 428d

    Additional information 4: 428dabe23420e869f79bdc2d71421a26

    Running 64 bit Windows 7 on a CPU E5 - 2665 HPZ820 2.4 GHz (x 2) 128 GB of RAM (95 GB reserved for After Effects)

    Have you installed any other software? An updated driver? If so, you may need to reinstall AE so the correct versions of MSVC libraries installed or you will have to undo everything you did change. Also check your cache settings, maybe the cache is full or damaged and causing these crashes whenever you try to add more pictures to the top of the pile.


  • Hangs after startup (10-15 minutes), after update to Sierra

    After the upgrade to Mac OS sierra, every time when I start my MacBook Pro (retina, 15 inch, mid-2015). After the OS boot completed, my MacBook freezes around 10-15 minutes (can not do anything). But after that BONE back to normal, everything seems Ok (functions does not work correctly).

    Can someone tell how to fix this?

    Check your connection points in System preferences - users and groups - login items. And also check the CPU usage in activity monitor.

  • Terminal Windows 2008R2, 17.01 Firefox server hangs after startup for all users

    We have 2 servers RDP with Windows Server 2008R2, we recently updated firefox since version 9 version 17.01 because of flash plugin crashes. After that the firefox update blocks very regular for each user.

    After you open a site, we see it for a fraction of a second, then
    The error message depending on whether we get:
    "Firefox has stopped working".

    This is the case for most sites, some sites work however, as
    Sites that do not work for example:

    I thought it would be flash again.
    What we tried:
    -Firefox to uninstall and reinstall again.
    -Uninstall Flash player and install it again.
    -Disabled all add-ons
    -tried save mode
    -tried this one: & as = aaq
    -tried this: & redirectslug = Managing profiles #os = win7 & browser = fx17
    -Firefox default factory reset
    -Old version 16.02 (after uninstalling 17.01)

    I'm a little short on options.
    Any help would be much appreciated!

    Kind regards


    Luckily a colleague of me figured it out!

    It turns out that the cause of the firefox crashes came from a security layer installed with the ESC Secure Layer that uses an application called Manager of funds
    The dll that the accident was referring is used by this program. Find that out was the hell google is now filled with the nonsense of 'check your PC for malware' stupid on a search for the dll.

    After removing the application, FF works fine again without crashing.
    So it seems a compatibility issue with Firefox and Money Manager

    Thanks for the help and I hope that someone in the future will have something on the solution we have found.



  • Tecra 8100 hangs after startup

    My Tecra 8100 has the same problem as described some time ago: the memory locations of MB were broken and doesn't have a connection properly. Even when I put paper or anything else between the cover and the memory module, it did not work and often my laptop has not yet started.

    I bought the new MB and now the laptop still start (I can see BIOS etc.) BUT crashes after Windows XP logo with notice: windows cannot start because the pci.sys file is damaged... The names of 'corrupt' are different, not only from pci.sys.

    When I portable computer boot from CD Win (to save the system) it blocks (crashes after 2-3 minutes). I tried to boot from Ultimate Boot Cd to detect the problem, but I can't do anything - always crashes after a short period of time - never start to run tests or Tools CD.

    I think that there is a problem of memory - I have 2 modules Kingston KTT-SO100/256, I tried to place them in different locations, together and alone, but nothing changes.
    These modules have worked with my old MB all the time.

    Any ideas?

    I read on other forums that this error can appear if the modules of memory are corrupt or not compatible or the memory on the motherboard slot is faulty.

    Well, you have replaced the Board but do you use 100% identical to that of first?
    Perhaps modules of memory are not compatible with the new Board of Directors.

    "I found this Microsoft document that describes the Pci.sys is missing or corrupt" Error Message:;en-us;319136&FR=1&PA=1&SD=HSCH

  • Photoshop CC 2015 trial hangs after startup

    Hello. I had just downloaded a trial version of photoshop. I try to re - open every time it crashes after opening. I tried signing out creative cloud and signature in and uninstall/re-installing but nothing helps, it crashes after opening. I use this on my windows 7 Home premium desktop.

    It seems that your AMD display card drivers cause a Photoshop crashing.

    Please update the graphics to the Web site of the manufacturer driver

    Download drivers

    I hope this helps.

    ~ UL

  • Photoshop cc 2014 hangs after startup

    Retina pro Mac Book 2014, osx 10.9.5, creative cloud for the team;

    (1) launch Photoshop cc 2014

    (2) Photoshop CRASHES (cannot open or work or save images)

    (3) "application not nice."

    (4) creating a new account on mac; Photoshop works in the new account;

    (5) in order to work with my classic account, what can I do to fix this? Is it a good idea to software disinstall/reinstall?

    Thank you

    Command: Photoshop

    Path: / Applications/Adobe Photoshop 2014/Adobe Photoshop Photoshop 2014 CC CC CC

    Version: 15.2.2 (

    Parent: launchd [143]

    PID: 793

    Event: hang

    Duration: 1.27 s (it was insensitive for 14 seconds before the sampling process)

    Steps: 13 (sampling of 100 ms interval)

    Photoshop is busy doing something - it looks like he's probably trying to restore some of the police.

    Try disabling the font previews in Photoshop, then leave then to restart.

  • Illustrator CC hangs after startup

    I saw that questioned more than times that I can count and I tried more bugs than that. I saw not a single solution for this on the forums.

    In any case, my Adobe Illustrator CC closes / crashes just after opening. I have to display the dialog box indicating what is new and it will be is not broken until after I hit very well, then in a few seconds, it crashes.

    I have Windows 8.1, all needed fonts, I tried to remove my preferences and reinstall several times.

    I contacted Adobe and they said maybe it's a registry error and that they'll fix it for more than $200 so I don't not done because it is absurd and I don't think it is a mistake to register. I have Photoshop CC and it works perfectly.

    I'd really like to hear from anyone who wants to help, it's really frustrating.

    Thanks in advance

    I finally fixed it!

    For anyone else having this problem this is how I fix

    C:\Program Files (x 86) \Common Files\Adobe\SLCache


    Find these two folders and move SLStore and SLCache folders to another location. Illustrator automatically generates them and then it worked!

    * C:\ProgramData is hidden, you should see and exploit the hidden files.

  • Satellite C660D freezes after startup

    Hi all
    I've had my C660D for a couple of years now without any major problems arise. However, a few days ago I turned on all normal loading (the office completely), but the fan became very strong and the laptop froze and was insensitive.

    He continues to repeat this problem, it is usable for the best part of 2 minutes and then freezes again. I have managed to do the system restore and even taken apart to clear the fan on, but the problem still persists. I tried safe mode, but still get the same problem.

    Help, please!
    Thank you

    Hmm recommends to test the laptop as part of new memory modules.
    It might be possible that the gel is related to the problem of memory.

    Also a high temperature may cause issues such as
    If you didn t clean cooling in the past fans, do so using the jet of compressed air.

Maybe you are looking for